AOCメーカーL37W861の使用説明書/サービス説明書
ページ先へ移動 of 43
37 37.
TABLE OF CONTENTS FOR YOUR SAFETY …………………………………………………….... 2 PRCAUTIONS AND REMINDERS ……………………………………….
1 SYMBOL SYMBOL DEFINITION SA 1965 DA NGEROUS VOLTA GE: The lightning flash with arrowhead symbol, w ithin an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
2 FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC .
3 DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television t uner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the Unit ed States on February 17, 2009.
4 Place unit on even surfaces. Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Unplug immediately if other foreign materials are put inside TV box or if the TV fell down.
5 Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display. Avoid direct sunlight, dusty, high humidity and smoky areas. Make sure to unplug the unit w hen not in use for a long period of time (days).
6 Read before operating equipme nt 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings.
7 18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stab ility properties of it s cabinets design. y Do not compromise these design standards by apply ing excessive pull force to the front, or top, of the c abinet, w hich could ultimately overturn the product.
8 Package Contents ◎ AOC L37W861 TV unit ◎ Remote Control ◎ Two (AAA) Batteries for the Remote Control ◎ Base ◎ Four screws (to attach the Base to the stand) ◎ Power Cord ◎ User Manual ◎ Quick Setup Guide IMPORTA NT: Do not apply pressure to the screen display area w hich may compromise the integrity of the displa y.
9 Preparing Your LCD HDTV for Wall Mounting We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wa ll, you need to remove the base. To attach a wall mount bracket to y our TV: 1 Remove the two T4 and tw o M4 screws holding y our TV to the stand.
10 Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1 . Install the base stan d ; place the TV on a solid su rface. Ensure that the TV is plac ed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.
11 3. Remote control: Remove the cover of the battery com partment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the w all so cket having an AC pow er supply. You can see LED states at the front panel. If the LED color is Blue, means the TV set is power on.
12 HDMI S-Video Composite Pr Pb Y PC Audio in 15-pin D- Sub 1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box th rough this all digital connector. The white color band on the rear of t he TV indicates this connection.
13 4. COMPONENT (YPb/CbPr/Cr w ith A udio L/R) – Connect the primary source for component video devices such as a DVD Play er or set top box here. From left to right, use red for Pr, blue for Pb, green for Y, red for right audio (R) and white for left audio (L) inputs.
14 TO USE THE FRONT PANEL CONTROL 1. VOL + VOL +: Press to incr eas e the sound volume level. 2. VOL - VOL - : Press to decr eas e the sound volume level. 3. CH ▲ CH +: Press to selec t the next higher Pr ogr am number. 4. CH ▼ CH - : Press to selec t the next lower Pr ogr am number.
15 TO USE THE REMOTE CONTROL POWER Press to power ON/OFF (standby) TV.(Note:1.TV is never completely power off. unless physically unplugged. 2.Press to turn on TV after the power on status LED had changed to the red color and stopped flashing. ) VIDEO Press repeatedly to choose S- Video/Composite source mode (Video 1 ~ 2).
16 VIEWING MODES ILLUSTRATIONS Normal Mode on 16:9 Display screen The original content would be at the center of the screen. Wide Mode on 16:9 Disp lay screen The original content in this mode has to fill the entire width of the display horizontally.
17 ZOOM Mode on 16:10 Display screen For those wide format images w hich are originally programmed into 4:3 frames with top and bottom black bars, this m ode has to stretch the image in both wide and high directions to the full display w ith active data.
18 CONNECTING EQUIPMENT Coaxial (RF) Using Your A ntenna or Digital Cable for DTV 1. T urn off the power to the HDTV. 2. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the ANTENNA/CABLE DIGITAL/ANALOG connector.
19 Using the A ntenna or Cable for your VCR 1. T urn off the power to the HDTV and VCR. 2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the ANTENNA/CABLE DIGITAL/ANALOG connector at the rear of the HDTV.
20 Connecting Your HDTV Set-Top Box Using HDMI HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the L CD HDTV for optimal results. Connecting your HDTV Set-Top Box (Be st) 1. T urn off the power to the HDTV and HDTV Set-T op Box.
21 For HDTV Set-Top Boxes w i th DVI 1. T urn off the power to the HDTV and HDTV Set-T op Box. 2. Using a HDMI-DVI cable, connect t he DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI Input at the rear of the HDTV. 3. T urn on the power to the HDTV and HDTV Set-T op Box.
22 6. T urn on the power to the HDTV and HDTV Set-T op Box. 7. Select Component (Video 3) using the INPUT button on the remote, side of the HDTV or directly by pressi ng the Component button on the Remote Control. Connecting Your Basic Set-Top Box Using Composite Video 1.
23 Using Coax (RF) 1. T urn off the power to the HDTV and Set-Top Box. 2. Using a Coax (RF ) cable, connec t one end to the TV OUT (RF ) on your Set Top Box and the other end to the DT V/T V input at t he rear of the HDTV. 3. T urn on the power to the HDTV and Set-Top Box.
24 Connecting Your DVD Player Using HDMI DVD players that have a digital inte rface such as HDMI (High Definition Multimedia Interface) should be connec ted to the HDMI input of the LCD HDTV for optimal results. Connecting your DVD Play er (Best) 1. T urn off the power to the HDTV and DVD player.
25 Using Component Video Connecting your DVD Play er (Better) 1. T urn off the power to the HDTV and DVD player. 2. Connect the Pr (red color) connec tor on your DVD play er to the corresponding Pr (red color) connector in the Component at t he rear of the HDTV.
26 Using S-Video (AV) Connecting your DVD Play er (Good): 1. T urn off the power to the HDTV and DVD player. 2. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV group on t he rear of the HDTV.
27 5. Select Composite (Video 1) using the INPUT button on the remote, side of the HDTV or directly by pressing t he AV button on the Remote Control..
28 Connecting Your VCR or Video Camera 1. T urn off the HDT V and VCR or Video Camera. 2. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV group on the rear of the HDTV.
29 Connecting to a PC Computer 1. T urn off the power to the HDTV and PC Computer. 2. Connect a 15-pin D-Sub RGB (VGA) c able to the RGB out put of your pc computer and the other end to the RGB PC input at the rear of the HDTV. 3. Connect the Audio Out on your pc com puter to the RGB PC Audio input at the rear of the HDTV.
30 TO USE THE MENUS 1. Press the MENU button to display the main menu 2. Use the cursor up / dow n to select a menu item. 3. Use the cursor left / right to enter a submenu. 4. Press the ENTER button to enable/dis able the function. 5. Press the MENU or EXIT button to exit the menu.
31 6. Channel Labels : Show the NTSC / AT SC TV channel label menu for user modifying channel labels specifically. 7. Menu Language : Select the menu display language. (English / Espanol / Francais) 8. Aspect Ratio : Select the display aspect rati o. (Normal/Zoom/Wide/Cinema) 9.
32 A UDIO MENU The Audio menu in TV mode shows as below. It provides audio adjustment for user to modify the audio setting. Audio language setting is only available w ith ATSC TV source, the option is disable under other source modes.
33 FEA TURE MENU The Feature menu in TV mode show s as below. It provides certain optional control functions such as time set, sleep timer, advanced video menu, Password Set, parental control (V-chip) and Digtal closed caption setting. This menu gives users the most flexibilities to satisfy their generally demands.
34 【 Dynamic Contrast 】 user can choose 0n or Off. 【 Setting 】 restores the default adv anced video option settings. 4. Passw ord Set : Change the 4-numeral parental c ontrol password. Three steps are required for changing the password: Enter Old Password -> Enter New Password -> Confirm New Password.
35 6. Digital Caption s: Select the close caption options ( Service 1-6, Text 1-4 and CC 1-4) in digital TV mode. When select service 1 to service 6 you canmodulate parameters in the Digital Close Caption. 7. Digital Close Caption : Provide numerous options for setting the digital close caption style.
36 【 Edge Effect 】 : The text edge effects, which gives None / Raised / Depressed / Uniform / Left Shadow / Right Shadow modes. 【 Edge Color 】 : The colors of text edge effects, which provides Red / Green / Blue / Yellow / Magenta / Cy an / Black / White Colors.
37 TIPS Care of the screen Do not rub or strike the screen with any th ing hard as this may scratch, mar, or damage the screen permanently. Unplug the power cord before cleaning t he screen. Dust the TV by w iping the screen and the cabinet with a soft, clean cloth.
38 Regulatory Notices – Federal Co mmun i cations Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of t he FCC Rules. T hese limits are designed to provide reasonable protection against ha rmful interference in a residential installation.
39 NOTE: *This model complies with the specifications listed below . *Designs and specifications are subject to change without notice. *This model may not be compatible with f eatures and/or specif ications that may be added in the future. *37” LCD TV (37.
40 Please make these simple checks before calling service. These tips may save you time and money since charges for re ceiver installation and adjustments of customer controls are not covered under your w arranty.
41 GLOSSARY HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface A udio / Video Inputs Located on the rear of the receiver, these connecto rs (RCA phono type plug) are used for the input of audio and video signal s.
デバイスAOC L37W861の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
AOC L37W861をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAOC L37W861の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AOC L37W861の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AOC L37W861で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AOC L37W861を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAOC L37W861の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AOC L37W861に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAOC L37W861デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。