KonigメーカーSEC-SETDVR30の使用説明書/サービス説明書
ページ先へ移動 of 85
SEC-DVR504 SEC-SETDVR20 SEC-SETDVR30 SEC-SETDVR40 MANUAL (p. 2 ) Full Manual 2012-09- 20.
Full Manual CAUTION! TO REDUCE THE RISK OF ELECTRIC SH OCK, DO NOT REMOVE COVER WHILE THE DEVICE IS CONNECTED TO A POWER SO URCE. THE DEVICE’S INTERNAL P ARTS CANNOT BE SAFEL Y REP AIRED BY USERS. REFER SER VICING TO QUALIFIED SER VICE PERSONNEL. W ARNING! TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
LIMITATION OF LIABILITY ■ This user manual is supplied “as is”, with no warrant ies, be it expressed or implied, including, but not limited to the implied warranties of merchantability , su itability for any exact purpose, or non-infringement on any third party’ s rights.
It is possible to damage hard drives if they are moved while their motors are still running. T o allow the hard drive to spin down and park it s heads, wait at least 10 seconds after disconnecting it from a power source before moving the unit.
COPYRIGHT STATEMENT All rights reserved. No p art of this publication may be reproduced in any form or by any means, transcribed, translated into any language or comput er language, transformed in any.
T able of Content s LIMIT A TION OF LIABILITY ............................................................................................................................. 3 DISCLAIMER OF W ARRANTY .....................................................
5.3.5 Recording Frame Rate ............................................................................................................................... ......................... 31 5.3.6 Recording Pack T ime ........................................
8.4 Android Mobile ............................................................................................................................................................................... 67 8.5 BlackBerry Mobile ...............................
1 ． YOUR DVR AT A GLANCE Product Overview Model 4 CH Video Format PAL/NSTC Video Compression H.264 Baseline Compression Video Input / Output BNC 4CH Input / 1CH Output Alarm Type Motion detection, V.
(Some limitations apply to W eb- and phone-based features ; please see the related sections for more detailed information.) Users are advised to become familiar with the DVR’s p a rts and accessories, as well as how to use the device as described in this instruction manual.
• Power LED, Recor d LED LED lights indicate the DVR’ s connection to the power supply , recording status • Menu ( ) : Press this button to access the toolbar , hide t he toolbar , enter or exit from the menu, and enter or exit sub-menus. • Rewind ( ◄◄ ) : Press this button to rewind the video during playback.
4. Power Input Socket (12V DC) 5. Ethernet Connector RJ-45 10/100 Base-T Ethernet network 6. Video Output Connector Video output for connecting the DVR to a monitor or TV , (BNC, 1Vp-p, 75 Ω ) 7.
3.4 Mouse Control As well as the remote control and the buttons on the DVR itself, you can use a mouse to operate the DVR. The mouse operates just like a mouse on a typical co mputer . T o start, connect the mouse to the USB port in the back panel of the DVR; note t hat you can hot-plug the mouse.
■ Power Use the 12V DC adapter supplied for connecti ng your DVR device to the power source. ■ Ethernet For remote access to the video images from your ca meras via LAN or Internet, connect a standard RJ-45 twisted-pair Ethernet cable to the Ethernet port.
For a list of HDDs tested and approved for compatibility with DVRs, see Appendix 2. DVR-Compatible Hard Disk Drives . 4. Getting Started and the Main Screen 1) T urn on the DVR and wait for the system program to load. If any of the following conditions are true.
4.1.1 Displaying a Single Channel In the multiple-screen view , you can make a particular window active by lef t-clicking on it once with a mouse, or navigating to it using directional buttons ( , , , ).
4.1.4 T ool Bar After logging in system, double-click the right-hand m ouse button, and it will display the following toolbar . MANUAL REC / ST OP MANUAL REC KEYLOCK SEQ EZOOM PIP1*1 PIP1*2 VGA/BNC SW.
4.2 T ool Bar Menu Options 4.2.1 System Configuration After pressing this button, a screen for configuring all system settings will appear . From this screen, system and network settings, and settings for recording, video playback, alarmscan be adjusted.
Instructions: CHN : CH1, CH2, CH3, CH4 and ALL MONTH : This option will show all the recordings in a given month. A green background on the calendar indicates normal recording; an orange indicates this file is a motion-detection recording, and a gray background indicates that there was no recording.
3. If the “RECORD TIME” section is marked as “ON” und er the “VIDEO DISPLA Y” section, it will show the date/time that the video was recorded when playing back re corded file; if it is marked as “OFF”, it will not display the time.
The following are the functions of and options for the items in the playback control panel: Fast rewind: the available speed s are 2x, 4x, 8x, 16x, 32x, and 64x. Slow forward: the available speeds are 1/2x, 1/4x and 1/8x. Play Pause/Frame-by-frame view Fast forward: the available speeds are 2x, 4x, 8x, 16x, 32x, and 64x.
U-DISK Backup by Time Note: In standard English, a “U-DI SK” would be called a “USB storage devic e.” (the term “U-DISK” referred to in this manual and the software for this DVR is a dire ct translation of the Chinese word for “USB drive”).
4.2.5 Playing Backed Up Videos on Home Computers 1) Copy the program “Hsplayer .exe” from the installation CD to the computer to be used. Double-click the “ ” icon to run the program. Maximize the window 2) Click “ ” to open the video recorder in “*.
4) Right-click to open the shortcut menu window . Open the video recorder in “*.avi” or “*.264” format T o set up the path for saving captured images Full Screen Language options (for changing languages) Note : Files backed up on USB drives that those file fo rmats are “A VI” can be played using Windows Media Player directly .
5. DVR 5.1 Menu T ree 5.1.1 Menu Options In order to modify/adjust the system configuration, it is necessary to enter the “System” menu; to do this, click the “Settings” icon ( ) in the “T ools” menu. After clicking the “Settings” icon, a dialog box with settings for all of the systems and options available for the DVR will appear .
(c) Use the menu to become familiar with the existing non-adjustable settings. When making selections from the fields or entering info rmation into them using the remote control directional keys or th.
DA TE: Set the date using the numerical keypad. DA TE FORMA T : Press “Enter” to switch the date form at, include YY -MM-DD, MM/DD/YY and DD-MM-YY . TIME FORMA T : Press “Enter” to switch the time format fr om a 12-hour clock to a 24-hour clock and vice versa.
ADD USERS : Add new users. In this window , enter the new user ’s name and password in the corresponding fields, and then to confirm the password, enter it a second time in the “Confirm Password” field. The length of the p assword must not exceed 6 digits.
VIEW PERMISSION : Another very important function for the Admi nistrator is “View Permission”, which allows the Administrator to set different viewing permissions for different users (see the preceding figure on the right). The Administrator can decide which channel(s) each us er is allowed to view .
overwritten. The “7 DA YS”, “30 DA YS”, and “90 DA YS” options are similar to the “2 DA YS” option, except that instead of recording for two days before the automatic ov erwrite takes place, recording will continue for 7 days, 30 days, and 90 days, respectively before being overwritten.
5.3 Record Move the cursor over the “RECORD” tab (the icon will be highlighted when selected). Press “Enter” to enter the “Record” settings interface.
5.3.6 Recording Pack Time There are four options: 15 minutes, 30 minutes, 45 minutes, and 60 minutes. It will pack as the mode selected when alarm recording is disabled. 5.3.7 Recording Modes There are two recording modes: “AL WA YS” and “SCHEDULE”.
example, to set a schedule where the DVR uses MD recording from 2:00 AM until 1:00 PM, and normal recording from 1:00 PM until 10:00 PM on T uesdays, Wednesdays, Thursdays, and Fridays, the process would be as follows: 1. Click the orange box at the bottom of the screen to select “MD record”.
5.4 V ideo Move the cursor over the “VIDEO” tab (the t ab will be highlighted when selected). Press “Enter” to enter the video settings menu. The direction keys and cursor can be used to change the settings. 5.4.1 Channel Use this field to select a channel to set up, or to modify its settings.
5.4.7 Video Margin T o enter the “Video Margin” menu, click “System Settings”, then click “Video”, and select “Margin”. The entire video screen can be moved up, down, to the left, and to the right using this option.
1) If static allocation has been selected, it is nece ssary to set up an IP address, a subnet mask, a gateway , and a Web port. MEDIA PORT : T ransfers video data between the client and the device. The default number is “9000” WEB PORT : Sets up a W eb browser port via HTTP .
Bit rate : There are 6 options: 64K, 128K, 192K, 256K, 384K, and 512K. Stream control : There are two options: VBR and CBR. 5.5.3 DDNS Setup Move the cursor to “DDNS SETUP” and press “Enter” to enter the DDNS setup menu. DDNS : The two options are “ON” and “OFF .
SSL : SSL is a security link transport protocol that c an be used to encrypt informat ion communicated over the Internet (including email) to prevent hackers from ac cessing the email communication or other information of users on a network, such as passwords.
SERVER PORT : Mobile monitoring port. In this field, enter the relevant mobile port and press “ ” to confirm. The range for server port s is between “1024” and “65535”; The default is “10510”. NETWORK TYPE : From this field, select from different mobile networks, including 3G , 2.
5.5.8 FTP Settings Move the cursor to “FTP Setting” (the t ab will be highlighted when selected) and press “Enter” to access the FTP settings menu. Port, User name, Password : Install the FTP server first, then register , and remember the port, username, and password.
5.6.4 EXCEPTION ALARM T o access the “Exception Alarm” p age, in the toolbar , fi rst click “System Settings”, and then click “Alarm.” Next select “Exception Alarm” and click “>>” and a dialog window where the buzzer for HDD Full, HDD Loss and Video Loss can be set will appear .
T o enter the “Regional Setting” menu, move the cursor to “setting” and then press “Enter .” When vi ewing the selected channel’s coverage area using the MD Area option, the blue area is where motion detection is activated, and transparent block is the area where motion detection is not activated.
(1) Open the Internet Explorer browser and click the “T oo ls” tab located in the bar at the top of the browser; from the dropdown menu, select “Internet Options”. (2) Click the “Security” tab in the dialogue box. (3) Click “Custom level” (at the bottom of the dialogue box) to set the security level.
6.3 Connection Settings Remote access to the hard disk drive is carried out over the Internet. In the local area network, the IP address of the client-side computer must be in the same network segment that the IP address of the hard disk drive.
Ste p 4 : Double-click “Internet protocol (TCP/IP)” from the “T his connection uses the following items” list in the center of the window(see preceding figure).
After connecting to the internet, Internet Explorer (o r other Internet browser being used) will automatically download the file to the computer as follows. The system will automatically enter the GUI as follows. Select the English interface from the upper left si de.
6.5.2 Controls T o use the controls, move the cursor over the icons, which will become highlighted when selected. / Connect all windows or disconnect all windows. Capture images which can be saved in a lo cal disk, (the default system save path is “c:DVRBACKUP”.
6.5.4 Replay Click “REPLA Y” to enter the playback interface. T o search for a recording by date, click calendar in the upper-right corner , and use “ ” and “ ” to set the month of the video being searched for; click “REFRESH” (located just below the calendar) to display the recording information of current month.
Double-click one of the listed recorded videos or sele ct one of the listed recorded videos and then click “PLA Y” to begin playback. The file icon will change to . Using this button, users can download files to their computers and save them to a HDD for backup or later viewing.
B. Recording Settings Click “Record Setting” to enter the recording settings menu. From this page, users can enable or disable recording for each channel, set recording schedules, and adju st specific recording parameters, i.e. setting the pack time, and setting recording modes.
Channel alarm settings : From the sidebar on the left, click “Alarm Setting”, then select “Channel Alarm” to enter the “Channel Alarm” setup interface. From this interface, users can set motion-detection alarms, define motion-detection privacy masking areas, motion sensitivity , buzzer time, prerecording time, and post-recording time.
E. Mobile Settings From the sidebar on the left, click “Network Setting”, and then select “Mobile” to enter the “Mobile Settings” interface.
email notifications, enable or disable SSL, and modify SMPT settings (i.e. setting the SMTP server , port, sender , password, and addresses). G . IP Firewall Settings From the sidebar on the left, click “Network Setting”, and t hen select ”IP Firewall” to enter the firewall settings interface.
H. ESMS Settings From the sidebar on the left, click “Network Setting”, and then select “ESMS Settings” to enter the ESMS settings interface. From this interface, users can sele ct the interval for receiving ESMS alerts, and add phone numbers that should receive ESMS al erts if alarms are triggered.
J. System Settings From the sidebar on the left, click “Advanced Setti ng”, then select “System Setting” to enter the system settings menu. From this menu users can set the language and TV mode for the DVR, and set st arting and ending times and dates for Daylight Savings T ime (or turn the setting off altogether).
HDD Information : Clicking “HDD INFO” under the “System INFO” tab will open the hard disk drive information interface. From this page, users can check the hard disk drive st atus, the total storage capacity of hard disk drive, and of the amount of free space lef t on the hard dis k drive.
M. User Management Add/Delete Users : From the sidebar on the left, click “User Manager”, and then select “ADD OR DEL” to enter the user management interface. Once a pa ssword has been enabled, this interface can only be accessed by the Administrator .
6.5.7 Local Settings From the sidebar on the top, click “Local Setting” to ent er the local settings interface. From this p age, users can set up the save path for local settings; in the “Rec or.
7. Wap Connection The digital video recorder can also be remotely acce ssed by using a W eb browser installed on a mobile phone that supports xHTML and MJPEG file format s , and has a screen resolution of 320x240 or higher . T o access the digital video recorder , follow these instructions: 1.
Choose the channel you want to monito r Choose picture size for monitor Choose refresh time Note: It is only possible to monitor one channel at a time. T o view another channel, press “return” and choose another channel number in the settings page.
screen that looks like the adjacent screenshot will appear; enter the username, password, server (the IP ng. ye” application offers a choice of channels, connection, and settings buttons.
After the inst allation is complete, locate the Mobile Eye icon “ ” in the list of applications on the mobile phone. In order to start working with the CCTV feed on the Symbian mobile phone, it wi.
Save the preceding settings and return to the main wind ow by pressing “Done”, or press “Cancel” to discard the changes. Press the “ ” button to connect to the DVR. After successf ully logging in to the DVR system, it will be possible to watch the remote video feed on the Symbian S60 mobile phone.
Full Screen This function displays the camera feed in the fu ll-screen mode. All menus and buttons will be hidden in full-screen mode. Snap The function enables users to take a snap shot of the camera view . Setting After pressing this button, the connectivity setup screen will appear .
Nokia E60 Nokia N96 Nokia E61 Nokia N97 Nokia E61i Samsung I7110 Nokia E62 Samsung INNOV8 Nokia E63 Samsung SGH-G810 Nokia E65 Samsung SGH-i400 Nokia E66 Samsung SGH-i450 Nokia E70 Samsung SGH-i520 Nokia E71 Samsung SGH-i550 Nokia E75 Samsung SGH-i560 Nokia E90 Samsung SGH-L870 8.
address) had been connected. Click one to enter the settings menu, and click “ ” to remove all the records. Server ID : The public IP address or dynamic domain name of the DVR. Port : The server port of the DVR for remote access viewing via mobile phone, the default is “10510”.
Other icons as below: Use the numbers to select the live view channel to display . Play/S top button. Capture: to capture a frame of the video stream as a still photo. Enlarge the selected channel to full screen. Device set up, you can set up Devices (DVR) unlimitedly .
There are two ways to view the live feed from the DV R on the screen: by IP address (or DDNS) and by Auto ID. By IP address (or DDNS), user needed to set up “IP”, “Port”, “User Name”, “Password” and “Record Name”. And by Auto ID, user needed to set up “PnP”, “User Name”, “Password” and “Record Name”.
② . Return to the main screen. Next, press “connect” on t he main interface and it will connect to the server . From this menu, users can also sw itch channels, operate PTZ controls, including zoom/iris/focus, use the phone to capture still images, and display videos in full-screen mode.
Figure1 Figure 2 5. Click “Application Loader” to access its interface. In this screen there are two options to select from. Select “Add/Remove Applications” (shown in the following illustrations) and click “S tart.
6. After clicking “S ta rt”, the following screen will appear . From this screen, click “Browse” (circled in red in the following screenshot). 7. After clicking “Browse”, the following file search screen will appear . Open the folder to which the application files were saved.
8. The “Application Loader” screen will automatically appear . In this screen, “MobileEye” should now be listed in the “Device application selection” list with “I nstall” listed under the “Action” column (as shown in the following screenshot) if the installation was successful.
10. Select “Mobile Eye” from the “Name” list, click “Next”, and the following screen will appear . At the bottom of the “Summary” page (see following screenshot) c lick “Finish” to confirm the operation, and the application “MobileEye” will be removed from the device.
① Main System Interface After the inst allation, touch the “MobileEye” icon in the application (as in the following illustration). After opening “Mobile Eye”, the following screen will appear; this is the main system interface.
Record list s : Saved records can be found here; User name : This refers to the DVR’ s device ID Password : This is user p assword for entering the DVR system Address : This is the public IP address or dynamic domain name of DVR. Port : The server port listed on the DVR menu; the default is “10510.
Choose Channel : This function switches the channel being viewed. It may only be enabled AFTER connecting to the DVR. : These keys move the PTZ up, down, lef t, and right.
3) F AQ – Frequently Asked Questions 1: Why can’t the mobile phone connect to the server? A: Check that the server , port, username, and pa ssword have been entered correctly; misspellings and entering incorrect information are typical causes of connection problems.
2. What should be done if the DVR is reboot ing automatically or has stopped midway through st arting up? Check for the following problems: Unstable or low input volt age. The connection to the hard disk drive is unstable or dysfunctional. The power supply is insufficient.
8. What if the system time is not correct? The wrong setting might be selected. Correct the time, and make sure to click “ ” to confirm the changes. The battery may not be connected properly . The battery might be dead, in which case, change the battery .
changes. Y our DVR is equipped with the DDNS functionality and has a list of related domain names through which you can acquire an IP address. (See Section 5.5.3 for det ails.) Set up an account with a DDNS service provider and with the account information available, log in to the router and go to the DDNS page.
“ie_tab_plus-1.95.20100930-fx+sm(IE T ab Plus (FF 3.6+ ).xpi” into the address field. A dialog box will prompt you to install or cancel the program; choos e “Inst all immediately .” After inst alling the program, restart Firefox Browser . 4. Open Firefox and enter the DVR IP address in the address field.
6. Select “Continue” to continue installing extensions and the following screen will appear . 7. Click “Install’ and the following screen will appear . Note: If the web page still does not open, press the “ ” icon on the right of the address field to display this p age in an IE based-tab.
Appendix 6 How to Use Auto ID – “Plug n play” Quick Guide 1. The ID number of each product is set in the factory . From the toolbar , click “System Setting”, and select “user”. The screen will display the user management menu, and the DVR’ s ID number will appear at the top of the screen (as in the following illustration): 2.
3. Regarding use of the router to browse the Internet, first you should have the transmit codex of the router ’s port already mapped. Alternatively , open the UPnP , and the router will automatically map the port. 4. Once the network is connected, enter “http://www .
5. After the connection has been est ablished, the Web Application Management (see the following figure) will appear . Note: Refer to Section 6.4 Control Download and Installation for instructions on what to do after logging in here.
デバイスKonig SEC-SETDVR30の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Konig SEC-SETDVR30をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKonig SEC-SETDVR30の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Konig SEC-SETDVR30の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Konig SEC-SETDVR30で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Konig SEC-SETDVR30を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKonig SEC-SETDVR30の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Konig SEC-SETDVR30に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKonig SEC-SETDVR30デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
