KraunメーカーKR.XMの使用説明書/サービス説明書
ページ先へ移動 of 21
www .kraun.it Router Ethernet/USB ADSL2/2+ User’s Manual Cod. KR.XM.
www .kraun.it 2 User’s Manual Contents Package contents 3 1. Introduction 3 1.1 Product Overview 3 1.2 Main Features 3 1.3 Conventions 3 2. Hardware Installation Guide 3 2.1 The Front Panel 3 2.2 The Back Panel 4 2.3 Installation Environment 4 2.4 Hardware installation procedures 4 3.
www .kraun.it 3 User’s Manual Package contents The following contents should be found in your box: • One KR.XM Router Ethernet/USB ADSL2/2+ • One AC power Adapter for KR.
www .kraun.it 4 User’s Manual 2.2 The Back Panel Figure 2 2 • ON/OFF: The switch for the power. • POWER: The Power plug is where you will connect the power adapt- er.
www .kraun.it 5 User’s Manual Figure 3 3 Step 4: Configure the IP address as Figure 3 4 shows. After that, click OK. Figure 3 4 -> Note: You can configure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in the screen above.
www .kraun.it 6 User’s Manual Figure 3 7 Step 3: You will see Figure 3 8 as follow, please wait a moment. Figure 3 8 Step 4: After that, you will see Figure 3 9. Click Finish to complete the installation. Figure 3 9 -> Note: 1) All of the above settings are under windows XP.
www .kraun.it 7 User’s Manual Figure 3 13 Step 4: Configure the following options provided by your ISP: User- name, Password, VPI, VCI and Connection Type.
www .kraun.it 8 User’s Manual Figure 4 4 - ATM VC: ATM settings are used to connect to your ISP. Your ISP pro- vides VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) set- tings to you. In this Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP.
www .kraun.it 9 User’s Manual Figure 4 6 -> Note: Each IP address entered in the fields must be in the appropriate IP form, which is four IP octets separated by a dot (x.x.x.x), such as 192.168.1.100. The Router will not accept the IP address if it is not in this format.
www .kraun.it 10 User’s Manual Figure 4 9 - Router Local IP: These are the IP settings of the LAN interface for the device. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.
www .kraun.it 11 User’s Manual 4.4 Advanced Setup Choose “Advanced Setup”, you can see the next submenus: Figure 4 12 Click any of them, and you will be able to configure the corresponding function. 4.4.1 Firewall Choose “Advanced Setup -> Firewall” menu, and you will see the next screen (shown in Figure 4 13).
www .kraun.it 12 User’s Manual - DMZ Host IP Address: Enter the specified IP Address for DMZ host on the LAN side. 4.4.3.2. Virtual Server Choose “Advanced Setup->NAT->Virtual Server” in Figure 4 16, you can configure the Virtual Server in the next screen.
www .kraun.it 13 User’s Manual This is useful when there are certain types of data you want to give high- er priority, such as voice data packets give higher priority than Web data packets. This option will provide better service of selected network traffic over various technologies.
www .kraun.it 14 User’s Manual Figure 4 23 - PVID: Each physical port has a default VID called PVID (Port VID). PVID is assigned to untagged frames or priority tagged frames (frames with null (0) VID) received on this port.
www .kraun.it 15 User’s Manual - Application: Select the application for the ACL rule, and then you can access the Router through it. - Interface: Select the interface for access: LAN, WAN or Both. - Access Control of Listing: This displays the information about the ACL Rules.
www .kraun.it 16 User’s Manual Step 4: Select the Protocol as “TCP” and select the Unmatched rule as “Next”. Step 5: Finally, click the SAVE to save the entry. Step 6: Go to Step 2 to configure the next two rules: Block E-mail re- ceived by the IP address 192.
www .kraun.it 17 User’s Manual 4.5.2.3 Application Filter Select Application Filter as the Filter type (shown in Figure 4 30), then you can configure the filter rules based on application. Figure 4 30 - Filter Type Selection: Select the Application Filter for the next configu- ration.
www .kraun.it 18 User’s Manual 4.5.5 DDNS Choose “Access Management->DDNS”, you can configure the DDNS function in the screen (shown in Figure 4 34). The router offers a Dynamic Domain Name System (DDNS) feature. The feature lets you use a static host name with a dynamic IP address.
www .kraun.it 19 User’s Manual -> Note: The ADSL Router built-in some NTP Servers, when the Router con- nects to the Internet, the Router will get the system time automati- cally from the NTP Server. You can also configure the NTP Server address manually, and then the Router will get the time from the specific Server firstly.
www .kraun.it 20 User’s Manual Figure 4 44 4.6.5 Diagnostic Choose “Maintenance->Diagnostic”, you can view the test results for the connectivity of the physical layer and protocol layer for both LAN and WAN sides in the screen (shown in Figure 4 45).
www .kraun.it 21 User’s Manual.
デバイスKraun KR.XMの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kraun KR.XMをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKraun KR.XMの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kraun KR.XMの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kraun KR.XMで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kraun KR.XMを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKraun KR.XMの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kraun KR.XMに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKraun KR.XMデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
