KTI NetworksメーカーDH-8Tの使用説明書/サービス説明書
ページ先へ移動 of 16
Installation Guide 10Base-T Ethernet Hub Model: DH8T DOC.980213-DH8T-K P/N: 750-0104-001.
KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without permission from KTI Net- works Inc. KTI Networks Inc.
The information contained in this document is subject to change without prior no- tice. Copyright Ó KTI. All Rights Reserved. TRADEMARKS Ethernet is a registered trademark of Xerox Corp.
10BASE-T ETHERNET HUB INST ALLA TION GUIDE DOC.980214-DH8T-NK P/N:750-0104-002.
T able of Contents Chapter 1 Introduction Introduction ............................................................................... 1 Features .................................................................................... 2 Chapter 2 Installation Installation .
1. Introduction Introduction This hub is an Ethernet Hub designed for the 10Base-T environment. In terms of topology , twisted-pair Ethernet 10Base-T is defined as a star topology rather than a bus. Each port on the hub connects to only one 10Base-T device via unshielded twisted-pair (UTP) cable.
Features • Network ports: 8 TP ports • Standard: T P ports conform to IEEE 802.3 10Base-T std. • Provides an additional RJ-45 jack labeled '8C' on the TP Port #8 for connecting to another hub. A standard straight-through 10Base-T UTP cable can be used for the hub-to-hub connection.
2. Installation Installation Y ou can place the hub in an area that meets the following specifica- tions: T emperature: 5 o to 40 o C when operating Humidity: 10% to 80% when operating Dimension: 195 mm x 129 mm x 28 mm (WxDxH) Checking AC Power One AC power adapter is contained in the hub package.
3. Making Network Connections Network Connectors The hub has 8 TP ports which are presented by 8 RJ-45 jacks. The jacks labeled 1 through 8 are permanently configured as 10Base-T MDI-X jacks and the jack labeled '8C' next the jack labeled '8' is an alternative jack which is configured as MDI jack for the TP port #8.
Connecting to an Ethernet Node T o connect the hub to a 10Base-T Ethernet node, follow these steps: 1. Select an appropriate length of 10Base-T UTP cable for the connection. 2. Connect one end of the UTP cable to the MDI jack on the remote device (e.g.
When the number of 10Base-T nodes in your network exceeds eight, you need to connect at least two hubs to integrate all 10Base-T nodes into one network. Y ou may connect one hub to another hub by using an ordinary UTP cable as the following steps: 1. Connect one end of the UTP cable to the jack labeled '8C' of Hub A.
When connecting more than two hubs via TP ports and UTP cables, it is important to minimize the number of hubs in any path of the network. Y ou may select one hub to serve as a primary hub to which other hubs will be connected. This will minimize the number of hubs in any path (node to node) on the network.
4. Interpreting Hub LEDs Locations of the Hub LED Indicators The hub provides the following LEDs : • One Power status LED • One Collision status LED • Eight Link and activity status LEDs. One for each TP port Interpretations Power LED The LED indicates the status of the hub's power source.
Collision LED This LED indicates the collision detected by the hub. The LED is normally off and it blinks when there are collisions. As the frequency of collisions on a network increases, the blink activities (on-time) of the LED also increase.
Appendix Specifications T emperature: Operating 5 o to 40 o C Storage -40 o to 70 o C Humidity: Operating 10% to 80% Storage 5% to 90% Dimension: 195mm (W) x 129mm (D) x 28mm (H) 7.7 inch (W) x 5.1 inch (D) x 1.1 inch (H) RJ-45 Jack Pin Assignments The following illustrations indicate the pin assignments of the RJ-45 jacks on the hub.
UTP Cabling Specifications The hub's TP ports support standard 10Base-T cable topologies and types, including Category 3, 4, or 5 unshielded twisted pair cable.
デバイスKTI Networks DH-8Tの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
KTI Networks DH-8Tをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKTI Networks DH-8Tの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。KTI Networks DH-8Tの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。KTI Networks DH-8Tで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
KTI Networks DH-8Tを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKTI Networks DH-8Tの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、KTI Networks DH-8Tに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKTI Networks DH-8Tデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。