Kyoceraメーカー1000Eの使用説明書/サービス説明書
ページ先へ移動 of 19
R EcoLAN 1000E Quick Configur ation Guide Network Connectivity for the DP-2800 Printer Alwa ys read this Quick Configur ation Guide thourghly bef ore use. After reading, maintain it in good condition and keep it together with the Quic k Configuration Guide for y our Laser Printer .
FCC Notice: This equipment complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Introduction The EcoLAN 1000E is an internal network interface card designed specifically for the DP-2800 printer . The EcoLAN 1000E features include: ❒ 10 Mbps Ethernet Interface ❒ 10BaseT / 10Ba.
T rademarks Kyocera ® is a registered trademark of Kyocera Corporation. NetWare ® is a registered trademark of Novell, Incorporated. Windows ® is a registered trade- mark of Microsoft Corporation. Macintosh ® is a registered trademark of Apple Computer, Incorporated.
Contents NetW are 4.x Directory Services Configuration ................ 1 NetW are 2.x & 3.x Configuration ....................................... 5 Windows 95 Peer to Peer Printing Configuration ............ 7 Windows NT Configuration ...........
NetW are 4.x Directory Services Configuration Bindery vs. NDS Setup In addition to its native NDS (NetWare Directory Services), NetW are 4.x can also be used in Bindery emulation. Bindery emulation is provided on the 1000E for users more familiar with the NetW are Bindery than with NDS.
3. Define the Print Server , Printer , and Queue. ➪ Select Quick Setup to display the Print Services Quick Setup screen. Note: If you do not have sufficient rights to create objects in this context, Quick Setup will not appear on the menu. Y ou must have the Object Create right in order to add Print Services.
3. Password Protection. Many of the configuration options in the MAP utility are password protected. The default password is: sysadm The password is case sensitive. T o change the password, select Change Password in the System column. 4. NetW are Configuration.
NetW are 2.x & 3.x Configuration 1. Login as Supervisor and start PCONSOLE. 2. Define the Print Queue. ➪ If a Print Queue already exists which will be assigned to the 1000E, skip to step 3. ➪ Select Print Queue Information from the Available Options menu.
6. Confirm Successful Configuration. ➪ T urn the printer off and on and wait for a powerup network status page to print. If the network is large, the powerup status page may take several minutes to print. (Note: This time may be reduced by setting a Preferred File Server for the 1000E with the Management Access Program.
Windows 95 Peer to Peer Printing Configuration What is Windows 95 Peer to Peer Printing The peer to peer printing software which is included with the EcoLAN 1000E allows Windows 95 PCs to communicate directly with network attached printers. A network server , such as NetWare or Windows NT , is not required for peer to peer printing.
IPX Protocol Installation The IPX protocol is required for peer to peer printing. IPX is not installed by default when Windows 95 is first installed, but it can be easily added using the following procedure. 1. Click on the Windows 95 Start button and select Settings , Control Panel , Network .
Windows NT Configuration There are several options for setting up printing in a Windows NT environment. ◆ If a NetWare server is present, NetW are print services may be used by following the NetW are configuration instructions in this guide.
Windows NT 4.0 1. Click on the Windows Start button, select Settings , and Control Panel . 2. Double click on Network and select the Protocols tab. If TCP/IP Protocol is not in the list of Network Protocols, click on Add to install it. 3. Select the Services tab.
10 Setting Up LPR Printing If the printer driver has not already been installed, please install it from the CD which is shipped with the printer before continuing. In the following instructions, some field or dialog names may be vary depending upon the NT release pack in use.
Macintosh Configuration For Macintosh compatibility , Mita printers must be equipped with the KPDL II PostScript option. Installing the Driver and Selecting the Printer 1.
UNIX Configuration UNIX printing utilizes a line printer daemon (lpd) to direct print jobs to the printer . The 1000E supports two modes of lpd printing, host-based lpd and printer-based lpd. With host-based lpd, the line printer daemon is run on one or more workstations (hosts) where print jobs are accepted and sent to the 1000E.
arp -s <desired_IP_address> <1000E_ethernet_address> The 1000E ethernet address is listed on the network status page as Network Address. For example, arp -s 197.42.211.5 00:40:AF:13:A2:70 4. At the UNIX command prompt, type: ping <desired_IP_address> For example, ping 197.
Published in June ‘98.
デバイスKyocera 1000Eの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Kyocera 1000Eをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKyocera 1000Eの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kyocera 1000Eの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kyocera 1000Eで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kyocera 1000Eを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKyocera 1000Eの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kyocera 1000Eに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKyocera 1000Eデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。