La Crosse TechnologyメーカーWS-7075Uの使用説明書/サービス説明書
ページ先へ移動 of 23
WS-7075U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 3-4 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 4-5 Program Mode Function Keys 6 12/24 hour T.
3 INVENTORY OF CONTENTS 1. The Weather Station (Figure 1). 2. One TX3U Remote Control Sender with mounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive t ape. 5. Instruction Manual and Warranty Card. ADDITIONAL EQUIPMENT (not included) 1.
4 a second per day. These physicists have created an i nternational standard, measuring a second as 9,192,631,770 vibrat ions of a Cesium-133 atom in a vacuum. QUICK SET-UP GUIDE 1. Insert two AAA batteries i nto the Remote Control Sender. 2. Insert two AA batteries i nto the WEATHER STATION.
5 back into its ho le, and angle it slightly—so the threads grab the battery cover. With the screw, pull the battery co ver off. 3. Observing the correct polarity install 2 AAA batteri es. The batteries will fit tightly (to av oid start-up problems make sure they do not spring free).
6 PROGRAM MODE Programming Note: If 30 seconds is allowed to pass, or either the IN or the OUT bu ttons are pressed during prog ramming mo des the unit will confirm/set the last in formation en tered—the display will sto p flashing and return to normal time-date readi ngs.
7 2. Press the SET button 1 more time to enter the Time Zone setting mode. The default Time Zone “-5” w ill flash in the DATE LCD. 3. Select your appropriate time zone using the CH button. During selection of the Time Zone, the 3 letter abbrev iations for the time zones found in North America will flash across the top of the TIME LCD.
8 Note: Some locations (Arizona and parts of Indiana) do not follow Daylight Savi ng Time, and should select “DST 0.” 5. Press the SET button to confirm and advance to the Tim e setting m ode. V. TIME There are two methods by whi ch the time can be set : A) Automatically via WWVB reception, or B) Manually.
9 4. Press the SET button to confirm the hour setting, and to advance to the minute setting mode. 5. The minute digits shoul d be flashing. Press the CH button to change the minutes—increasing th e minutes by increm ents of 1 with each press of the CH button.
10 8. Press the SET button to con firm and to enter the year setting mode. 9. The default-year will be flashing , use the CH to set th e appropriate year. 10. Press the SET button to confirm and to advance to the ° F or ° C setting m ode. VII. SELECTING ° F OR ° C 1.
11 FEATURES OF THE WS-7075U I. WEATHER FORECAST The weather forecasting feature is estimated to be 75% accurate. The weather forecast is based solely upon th e change of air pressure over time.
12 Sunny —indicates that the weather is expected to im prove (not that the weather will be sun n y). Sun with Clouds —indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Clouds with Rain —indicates that the weather is expected to get worse (not that the weath er will be rainy).
13 III. OUTDOOR TEMPERATURE The outdoor temperature is viewed in t he OUTDOOR LCD. When there is more than one Remote Cont rol Sende r unit in operat ion, a “boxed” number will appear to the right of the temperature. This indicates wh ich Remote Control Sender unit (1, 2, or 3) is currently displaying its data in the OUTDOOR LCD.
14 occurrence are d isplayed. The minimum records will display for 20 seconds. 2. Press the OUT button again (on ce while “MIN” is still displayed, twice ot herwise). “MAX” appears in the upper- center location of the fl ashing OUTDOOR LCD, indicati ng that the maximum temperature and the tim e and date of occurrence are displayed.
15 press the AL1 button (removing the ((1)) icon from the screen). To reactivat e the alarm, press the AL1 button agai n. 6. After each activation or deactiv ation, the programm ed alarm time is displayed. Wait 15 seconds and the date will display in the DATE LCD again.
16 arise if this is not done correctly and if the total time for set-up exceeds 6 minutes. A. SET-UP OF MULTIPLE UNITS 1. It is n ecessary to remove the batteries from all units currently in operation. 2. Remove the battery covers to all Remote Contro l Sen der units.
17 MOUNTING Note: Before permanently mount ing ensure that the Indoor Temperat ure Station is able to receive WWVB signals from the desired location. Also, extreme and sudden changes in temperat ure w.
18 ensure a secure hold. The mounting surface should be smooth and flat . 2) Remove the protective stri p from one side of the tape. Adhere the tape to the desi gnated area on the back of the mounting bracket . 3) Remove the protective strip from t he other side of the tape.
19 TROUBLESHOOTING Problem: No reception of WWVB time signal. Solution: 1) Wait overnight for signal. 2) Be sure Weather Station is at l east 6 feet from any electrical devices, such as televisions, com puters, or other radio-control led clocks.
20 MAINTENANCE AND CARE INSTRUCTIONS • Extreme tem peratures, vibration, and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, dam p cloth. Do not use solvent s or scouring agents; they m ay mark t he displays and casings.
21 SPECIFICATIONS Temperature measuring range: Indoor: 32 ° F to 139.8 ° F with 0.2 ° F resolution. (0 ° C to 59.9 ° C with 0.1 ° C resolution). “OFL” displayed if out side this range. Outdoor: -21.8 ° F to 157.2 ° F with 0.2 ° F resolution.
22 WA RRANTY INFORMA TION La Crosse Technology, Ltd provides a 1-y ear limited w arranty on this product against manufacturing defects in ma terials and workmanship. This limited warranty begins on the original dat e of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product.
23 PUBLIC INFORMATION. THIS PRO DUCT IS NOT A T OY. KEEP OUT OF CHILDREN’S REACH. This warranty gives y ou specific legal rights. You may also have other rights specific to your State. Some States do no allo w the exclusion of c onsequential or incidental damages therefore the above exclusion of limitation may not apply to y ou.
デバイスLa Crosse Technology WS-7075Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
La Crosse Technology WS-7075Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLa Crosse Technology WS-7075Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。La Crosse Technology WS-7075Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。La Crosse Technology WS-7075Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
La Crosse Technology WS-7075Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLa Crosse Technology WS-7075Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、La Crosse Technology WS-7075Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLa Crosse Technology WS-7075Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
