La Crosse TechnologyメーカーWS-7168Uの使用説明書/サービス説明書
ページ先へ移動 of 26
WS-7168U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipm ent 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default S.
3 INVENTORY OF CONTENTS 1. The WS-7168U weather station (Figure 1). 2. One TX6U remote tem perature sensor (Figure 2). 3. Mounting hardware 4. Instruction m anual and warranty card. ADDITIONAL EQUIPMENT (not included) 1. Two fresh AA 1.5V batteries for the weather st ation.
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteri es and avoid rechargeable batteries. 1. Have the indoor weather station and rem ote tem perature sensor 3 to 5 feet apart. 2. Batteries should be out of both units for 10 m inutes. 3. Place the batteries into the remote temperature sensor first then into the indoor weather station .
5 DETAILED SET-UP GUIDE BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the m ounting bracket. The bracket snaps on and off easily. 2. Remove the battery cover, by sliding the cover down. 3. Observing the correct polarity install 2 AA batteries.
6 PROGRAM MODE Programming Note: If 30 seconds is allowed to pass, or the CH button is pressed dur ing the prog ramming mode, the unit will conf irm/set the last information entered—the d isplay will stop flashing an d return to normal time-dat e readings.
7 III. SETTING THE LCD CONTRAST 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in the time LCD and the number setting will flash. Note: There are 8 LCD contrast levels t o choose from—“Lcd 0” is the lightest, and “Lcd 7” is the darkest.
8 TIME ZONES GMT 0 Atlantic -4 EST; Eastern -5 CST; Central -6 MST; Mountain -7 PST; Pacific -8 ALA; Alaska -9 HAW; Hawaii -10 6. Press and release the SET button to confirm and advance to the Daylight Saving Ti me sett ing. V. DAYLIGHT SAVING TIME (DST) SETTING 1.
9 VI. RADIO-CONTROLLED TIME ON/OFF SETTING 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in th e time LCD and the number setting w ill flash. 3. Press and release the SET button three times. 4. “RCC” will appear on the rig h t of the time LCD and “ON” o r “OFF” will flash to the left.
10 6. Press and release the SET button to confirm and advance to the time setting. VIII. TIME SETTING There are two methods by whi ch the tim e and date can be set: A) Automatically via WWVB reception, or B) Manually.
11 5. Press and release the IN button to advance the hours. 6. Press and release the OUT button to advance the m inutes. 7. Press and release the SET button to confirm and advance t o the year setting. IX. SETTING THE YEAR, DAY AND MONTH Note: Reception of the WWVB signal will also set the date and day.
12 X. SETTING THE SNOOZE Note: This is an unused function of t he indoor weather station and should be disregarded. The setting has no bearing on the operat ion. Please press and release the SET button to adv ance to select the temperature format. XI.
13 XII. SETTING THE FORECAST SENSITIVITY Note: The forecast sensitivity can be adjusted to allow for areas that have a high er or lower sensitiv ity to changing air pressure (for example coastal areas have more pr essure change than areas such as southern Arizona).
14 FEATURES OF THE WS-7168U I. WEATHER FORECAST The weather forecasting feature is estim ated to be 75% accurate and is for the next 12 to 24 hours. The weather forecast is based solely upon the change of air pressure over time.
15 Sunny —indicates that the weather is expected to im prove (not that the weather will be sun n y). Sun with Clouds —indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Clouds with Rain —indicates that the weather is expected to get worse (not that the weath er will be rainy).
16 will display a happy face icon when the temperature is between 68 ° F and 79 ° F (20 ° C and 25.9 ° C), and the humidit y is between 45% and 65%. A sad face icon will be displayed when the te mperature and humidity are outside the mentioned ranges.
17 3. While “MAX ” is still displayed press the IN button again to return to the current d ata display. Or you can wait 30 seconds, during either the mini mum or t he maxim um readings, and the unit will au tomatically return to current data readin g s.
18 V. ADDING REMOTE TEMPERATURE SENSORS (OPTIONAL) The WS-7168U is able to receive signals from 3 different remote temperature sensors. The remote tem perature sensor model(s) that you choose will co me with their own set of instructions—follow these instructions for a complete guide t o setting up.
19 B. VIEWING AND OPERATING WITH MULTIPLE REMOTE TEMPERATURE SENSOR UNITS 1. To view the temperature of a different remote temperature sensor unit, press and release t he CH button. A shift from one “boxed” number to the next should be observed in the OUTDOOR LCD.
20 I. THE REMOTE TEMPERATURE SENSOR The remote tem perature sensor can be mounted i n two ways: • with the use of screws, or • using the adhesive tape. A. MOUNTING WITH SCREWS 1) Remove the mounting bracket from the rem ote temperature sensor. 2) Place the mounting bracket over the desired location.
21 A. USING THE TABLE STAND The indoor weather station com es with the t able stand already mounted. If you wish to use the t able-stand all that is required is to place the indoor weather station in an appropriate locati on. B. WALL MOUNTING 1) Remove the table-st and.
22 TROUBLESHOOTING NOTE: For problems not solved, please cont act La Crosse Technology. Problem: No reception of WWVB time signal. Solution: 1) Wait overnight for signal. 2) Be sure indoor weather station is at least 6 feet from any electrical devices, such as televisi ons, computers, or other radio-cont rolled clocks.
23 greater range of the remote te mperature sensor requires a different calibration curve than the indoor range. Error is usual ly greater at the extreme ends of a range, m aking it harder to com pare different ranges with different curves.
24 sensor): Outdoor temperature reception (indoor weather station): Every 5 minut es. Transmission range: 80 feet (in open space). Power Supply: Indoor weather station: 2 x AA, IEC LR6, 1.5V. Remote tem perature sensor: 2 x AA, IEC LR3, 1.5V. Battery life cy cle: Approximatel y 12 months.
25 Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only. Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship w i.
26 FCC DISCLAIMER THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2. THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY C AUSE UNDESIRED OPERATION.
デバイスLa Crosse Technology WS-7168Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
La Crosse Technology WS-7168Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLa Crosse Technology WS-7168Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。La Crosse Technology WS-7168Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。La Crosse Technology WS-7168Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
La Crosse Technology WS-7168Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLa Crosse Technology WS-7168Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、La Crosse Technology WS-7168Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLa Crosse Technology WS-7168Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
