LantronixメーカーEDS-MD8の使用説明書/サービス説明書
ページ先へ移動 of 338
Part Number 900-592 Revision A September 2011 EDS-MD TM Command Reference EDS-MD4 EDS-MD8 EDS-MD16.
EDS-MD Command Reference 2 Copyright and Trademark © 2011 Lantronix. All rights reserved . No part of the cont ents of this b ook may be transm itted or reproduced in a ny form or by any means without the written permissio n of Lantr onix. Printe d in th e United States of America.
EDS-MD Command Reference 3 T able of Content s Copyright an d Tr ademark ____________ ___________ __________ ___ ___________ _____ 2 Contacts _______ _____________ ___________ _____________ __________.
EDS-MD Command Reference 4 List of Figures Figure 3-2 CLI Level Hiera rchy _______________ ___________ _____________ _____________ __ 12 Figure 3-3 Login Le vel Commands _______________ _____________ .
EDS-MD Command Reference 5 List of T ables Table 3-1 Ke yboard Sho rtcuts __________ _____________ ___________ _____________ _______ 11 Table 4-7 XCR Gro ups _____________ ___________ _____________ __.
EDS-MD Command Reference 6 1: About This Guide This guide describe s ho w to co nf igu re th e EDS-MD4, EDS-MD8 an d EDS-MD16 using the Command Line Interface (CLI) and /or Extensible Markup Language (XML). It is written fo r software developers and system integrator s.
1: About This Guide EDS-MD Command Reference 7 Additional Document ation Visit the Lantronix website at www.lantronix.com/supp ort/documentatio n for the latest documentation and the following additional docum entation. Document Description EDS-MD User Guide Describes how to configure and use the EDS-MD4/8/16.
EDS-MD Command Reference 8 2: Overview EDS-MD4/8/16 supports t hree co nvenient configuration method s: Web Manager, Comma nd Line Interface (CLI) and Extensible Markup Lan guage (XML). For mo re information ab ou t the Web Manager, see the EDS-MD User Guide on the Lantronix website.
EDS-MD Command Reference 9 3: Command Line Interface This chapter descr ib es ac ce ssing th e EDS- MD 4/ 8/1 6 by usin g Te lnet , SSH, or serial ports to configure the EDS-MD, navigatin g th e Command Line Interfac e (CLI), typing keyboard shortcuts, and moving between the levels.
3: Command Line Interface EDS-MD Command Reference 10 To configure the Lan tronix device server locally using a serial port: 1. Connect a termin al or a PC running a ter minal emulation program to o ne of the device server 's serial ports.
3: Command Line Interface EDS-MD Command Reference 11 Using Keyboard Shortcut s and CLI One useful shortcut built into EDS-MD4/8/16 is that the comple te text of a command does not have to be entered to issue a command. Typing just enough ch aracters to uniquely identify a command, then hitting enter, can be used as a sh ort cut for a command.
3: Command Line Interface EDS-MD Command Reference 12 An overview of the levels in the EDS-MD is presented in Figure 3-2 CLI Level Hierarchy below. Figure 3-2 CL I Level Hierarch y Commands at the login level (see Figure 3-3 Login Level Commands below) do not affect current configuration settings and are not displayed initially.
3: Command Line Interface EDS-MD Command Reference 13 Figure 3- 4 Enab le Lev el Comman ds >enable (enable)#? auto show interfaces auto show processes clrscrn configure connect connect line <lin.
EDS-MD Command Reference 14 4: Configuration Using XML The device server provides an Extensible Markup Language (XM L) interface that you can use to configure device server devices. Every configurat ion setting that can be issued from the dev ice server Web Manager and CLI can be specified using XM L.
4: Configuration Using XML EDS-MD Command Reference 15 Note: The name for each <configgroup> (s pecifie d with the name attribute) is the group name listed in the Web Ma nag er XCR grou ps or with the "xcr list" CLI comma nd . See the EDS-MD Us er Guide for more information about the XCR groups.
4: Configuration Using XML EDS-MD Command Reference 16 Record, Group, Item, and V alue T ags A <configgroup> is a logical grouping of configu ration parameters and must co ntain one or more <configit em > ele m en ts. It mus t ha ve a na m e attribute and may have an instance attribute.
4: Configuration Using XML EDS-MD Command Reference 17 Figure 4-5 XML Example of Multiple Items <configgroup name="ssh server"> <configitem name="host rsa keys"> <va.
4: Configuration Using XML EDS-MD Command Reference 18 CLI-XCRs can be imported (captured) or expo rt ed (dumped) directly to a Telnet, SSH, or serial line CLI session. Capturing an XCR ca n be started by pasting a valid XCR directly i nto the CLI prompt.
4: Configuration Using XML EDS-MD Command Reference 19 The same guidelines above rega rding importing configu rations also apply to exporting configurations. If no grou ps are specified, then the export command will export all configuration settings to the file.
4: Configuration Using XML EDS-MD Command Reference 20 XML Configuration Group s Table 4-7 lists the EDS-MD XCR groups in alphabetica l order. This table indicates the various group items, as well as some po ssible value na mes and opt ions.
4: Configuration Using XML EDS-MD Command Reference 21 diagnostics log output disable, filesystem, line <number> Default: disable max length Default: 50 KB email to cc from reply to subject message file overriding domain server port Default: 25 local port <Random>, .
4: Configuration Using XML EDS-MD Command Reference 22 http server state enable, disa ble Default: enable port <None>, ... Default: 80 secure port <None>, ... Default: 443 secure protocols ssl3, tls1.0 , t ls1.1 May contain zero, one, or more of the values, separated by commas.
4: Configuration Using XML EDS-MD Command Reference 23 ip ip time to live Defau lt: 64 hops multicast time to live Default: 1 hops line name interface rs232 Default: termination enable, disa ble Defau.
4: Configuration Using XML EDS-MD Command Reference 24 managelinx plaintext dsm credentials dna.xml.replication .pr otocol.version dna.capabilities.tcp.c onnect.fail enable, disa ble Default: disable encrypted dsm credentials dna.dsc.au th.tunnel.u sername dna.
4: Configuration Using XML EDS-MD Command Reference 25 serial command mode mode always, serial string, disable Default: disable echo serial string enable, disable Default: enable serial string Sets a string that can be entered at boot time to enter command mode.
4: Configuration Using XML EDS-MD Command Reference 26 ssh client delete known hosts enable, disable If enabled, deletes any existing hosts before adding "known ho st".
4: Configuration Using XML EDS-MD Command Reference 27 ssl credentials rsa certificate rsa private key Value is SECRET, hidden from user view. dsa certificate dsa private key Value is SECRET, hidden from user view.
4: Configuration Using XML EDS-MD Command Reference 28 tunnel accept accept mode disable, always, any character, start character, modem control asserted, modem emulation Default: always start characte.
4: Configuration Using XML EDS-MD Command Reference 29 host vip enable, disable Default: disable vip name address port <None>, ... Default: <None> protocol tcp, udp, ssh, telnet,.
4: Configuration Using XML EDS-MD Command Reference 30 tunnel packing packing mode disable, timeout, send character Default: disable timeout Default: 1000 milliseconds threshold Default: 512 bytes sen.
4: Configuration Using XML EDS-MD Command Reference 31 XML St atus Record Group s and Items Table 4-8 lists the supported XML Status Record ( XSR) groups and items. T hese groups and items show the status of the device in XML form and can only be exported .
4: Configuration Using XML EDS-MD Command Reference 32 hardware cpu type string speed form of <decimal> megahertz memory Flash size decimal nu mb er of bytes ram size decimal number of bytes htt.
4: Configuration Using XML EDS-MD Command Reference 33 interface (Attribute of "instance" is "eth0 ") generic status linkup ip address dotted notation network mask dotted notati o .
4: Configuration Using XML EDS-MD Command Reference 34 ip snmp Forwarding decimal number DefaultTTL decimal number InReceives decimal numb er InHdrErrors decimal number InAddrErrors decimal number For.
4: Configuration Using XML EDS-MD Command Reference 35 line (Attribute of "instance" is "<decim al >") receiver bytes decimal number breaks decimal number parity errors decim.
4: Configuration Using XML EDS-MD Command Reference 36 query port status enabled or disa bled last connection ip ad dress ip addre ss in format nnn.nnn.
4: Configuration Using XML EDS-MD Command Reference 37 Group Name (continued) Item Name Value Name Valid Values tcp (continued) netstat Syncooki esSent decimal nu mb er SyncookiesRecv decimal nu mber .
4: Configuration Using XML EDS-MD Command Reference 38 Group Name (continued) Item Name Value Name Valid Values tcp (continued) n etstat (co ntinued) TCPPartialUndo decimal number TCPDSACKUndo decimal.
4: Configuration Using XML EDS-MD Command Reference 39 Group Name (continued) Item Name Value Name Valid Values tunnel (Attribute of "instance" is "<decima l>") aggregate com.
4: Configuration Using XML EDS-MD Command Reference 40 udp snmp InDatagrams decimal numb er NoPorts decimal number InErrors decimal number OutDatagrams d ecimal number RcvbufErrors decimal number Sndb.
5: Commands and Levels EDS- MD Comm and Referenc e 41 5: Commands and Levels Click the level in the tr ee structure and it will take you to the c omm and list for that level.
5: Commands and Levels EDS- MD Comm and Referenc e 42 host 32 (config- host:32) http (config-http) icmp (c onfig-icmp) if 1 (config-if :eth0) link (config-ethern et:eth0) ip (config-ip) query port (co.
5: Commands and Levels EDS- MD Comm and Referenc e 43 line 6 (line:6) line 7 (line:7) line 8 (line:8) ssh (ssh) client (ssh-c lient) server (ssh- server) ssl (ssl) credentials (ssl- credentials) trust.
5: Commands and Levels EDS- MD Comm and Referenc e 44 host 9 (tunnel-conn ect-host:2:9) host 10 (tunnel-con nect-host:2:10) host 11 (tunnel-con nect-host:2:11) host 12 (tunnel-con nect-host:2:12) host.
5: Commands and Levels EDS- MD Comm and Referenc e 45 host 6 (tunnel-conn ect-host:4:6) host 7 (tunnel-conn ect-host:4:7) host 8 (tunnel-conn ect-host:4:8) host 9 (tunnel-conn ect-host:4:9) host 10 (t.
5: Commands and Levels EDS- MD Comm and Referenc e 46 host 3 (tunnel-conn ect-host:6:3) host 4 (tunnel-conn ect-host:6:4) host 5 (tunnel-conn ect-host:6:5) host 6 (tunnel-conn ect-host:6:6) host 7 (tu.
5: Commands and Levels EDS- MD Comm and Referenc e 47 connect (tunnel- connect:8) host 1 (tunnel-conn ect-host:8:1) host 2 (tunnel-conn ect-host:8:2) host 3 (tunnel-conn ect-host:8:3) host 4 (tunnel-c.
5: Commands and Levels EDS- MD Comm and Referenc e 48 Note that quotes must enclose the value if i t contains spaces. aes encrypt key <hexadecimal> Sets the accept tunnel AES encrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits.
5: Commands and Levels EDS- MD Comm and Referenc e 49 no credentials Clears the RSA/DSA certificate selection. no email connect Discontinues sending email alerts upon es tablishing an accept mode tunnel. no email disconnect Discontinues sending email alerts upon closing an accept mode tunnel.
5: Commands and Levels EDS- MD Comm and Referenc e 50 Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces.
5: Commands and Levels EDS- MD Comm and Referenc e 51 no email connect Discontinues sending email alerts upon es tablishing an accept mode tunnel. no email disconnect Discontinues sending email alerts upon closing an accept mode tunnel. no tcp keep alive Disables the accept mode TCP keep alive timeout.
5: Commands and Levels EDS- MD Comm and Referenc e 52 tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes encrypt key text <text> Sets the accept tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 53 no email disconnect Discontinues sending email alerts upon closing an accept mode tunnel. no tcp keep alive Disables the accept mode TCP keep alive timeout. password Enters the next lower level. protocol ssh Uses SSH protocol for accept mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 54 Note that quotes must enclose the value if i t contains spaces. aes encrypt key text <text> Sets the accept tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a single characte r.
5: Commands and Levels EDS- MD Comm and Referenc e 55 no tcp keep alive Disables the accept mode TCP keep alive timeout. password Enters the next lower level. protocol ssh Uses SSH protocol for accept mode tunneling. protocol ssl Uses SSL protocol for accept mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 56 Each byte is represented by a single characte r. Note that quotes must enclose the value if i t contains spaces.
5: Commands and Levels EDS- MD Comm and Referenc e 57 protocol ssh Uses SSH protocol for accept mode tunneling. protocol ssl Uses SSL protocol for accept mode tunneling. protocol tcp Uses TCP protocol for accept mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for accept mode tunn e- ling.
5: Commands and Levels EDS- MD Comm and Referenc e 58 block network disable Forwards (tunnels) network data in accept mode tunneling. block network enable Discards all data coming in from the accept mode tunnel befor e forwarding it to the serial interface (generally use d for debugging).
5: Commands and Levels EDS- MD Comm and Referenc e 59 protocol ssl Uses SSL protocol for accept mode tunneling. protocol tcp Uses TCP protocol for accept mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for accept mode tunn e- ling.
5: Commands and Levels EDS- MD Comm and Referenc e 60 block network enable Discards all data coming in from the accept mode tunnel before forwarding it to the serial interface (generally use d for debugging). block serial disable Forwards (tunnels) serial data in accept mode tunne ling.
5: Commands and Levels EDS- MD Comm and Referenc e 61 protocol tcp Uses TCP protocol for accept mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for accept mode tunn e- ling. protocol telnet Uses Telnet protocol (with IAC) for accept mode tunnel ing.
5: Commands and Levels EDS- MD Comm and Referenc e 62 forwarding it to the serial interface (generally use d for debugging). block serial disable Forwards (tunnels) serial data in accept mode tunne ling.
5: Commands and Levels EDS- MD Comm and Referenc e 63 protocol tcp aes Uses TCP protocol with AES encryption for accept mode tunn e- ling. protocol telnet Uses Telnet protocol (with IAC) for accept mode tunneling. show Displays the current configuration.
5: Commands and Levels EDS- MD Comm and Referenc e 64 show history Displays the last 20 commands entered during the current CLI session. ssh Change to menu level for SSH configuration and status. telnet Change to menu level for Telnet configuration and status.
5: Commands and Levels EDS- MD Comm and Referenc e 65 kill ssh <session> Kills SSH session with index from "show sessions" kill telnet <session> Kills Telnet session with index from "show sessions" query port Enters the query port level.
5: Commands and Levels EDS- MD Comm and Referenc e 66 default start character Defaults the connect mode start character. email connect <number> Sets an email profile to use to send an email alert upon esta b- lishing a connect mode tunnel. <number> = the number of the email profile to use.
5: Commands and Levels EDS- MD Comm and Referenc e 67 fore forwarding it to the serial interface (generally use d for debugging). block serial disable Forwards (tunnels) serial data in connect mode tunne ling.
5: Commands and Levels EDS- MD Comm and Referenc e 68 kill connection Disconnects the active connect mode tunne ling connection or connections. local port <number> Sets a specific port for use as the local port. <number> = the number of the port to use.
5: Commands and Levels EDS- MD Comm and Referenc e 69 default local port Uses a random port number as the local port for establishing tunneling connections to other devices. default reconnect time Restores the default reconnect time value for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 70 A hex value character has the form 0xFF. write Stores the current configuration in permanent memory. connect (tunnel-connect:5) level commands block network disable Forwards (tunnels) network data in connect mode tunneling.
5: Commands a nd Levels EDS- MD Comm and Referenc e 71 network. host <instance> Enters the next lower level. Specify the instance for the next lower level. host mode sequential Connects to the first host in the list that accepts the conne c- tion.
5: Commands and Levels EDS- MD Comm and Referenc e 72 connect mode start character Enables connect mode tunneling when the configu red start character is received on the line. default connect mode Restores the default connect mode as "disable".
5: Commands and Levels EDS- MD Comm and Referenc e 73 session. show status Displays tunnel connect status. start character <control> Sets the connect mode start character. The character may be input as text, control, decimal, or hex . A control character has the form <control>C.
5: Commands and Levels EDS- MD Comm and Referenc e 74 flush serial enable Flushes the serial data buffer upon establishing a connect mode tunneling connection. flush start character disable Enables forwarding of the connect start character into the ne t- work.
5: Commands and Levels EDS- MD Comm and Referenc e 75 connect mode disable Disables connect mode tunneling. connect mode modem control asserted Enables the tunneling server to make tunneling connecti ons when the modem control pin is asserted. connect mode modem emulation Enables modem emulation for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 76 lished by the device in milliseconds. <milliseconds> = timeout in milliseconds. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session.
5: Commands and Levels EDS- MD Comm and Referenc e 77 exit Returns to the tunnel level. flush serial disable Characters already in the serial data buffer are retained upon establishing a connect mode tunneling connection. flush serial enable Flushes the serial data buffer upon establishing a connect mo de tunneling connection.
5: Commands and Levels EDS- MD Comm and Referenc e 78 device (device) level commands auto show tlog Continuously displays the internal trouble log. clrscrn Clears the screen. exit Exit to the enable level. show Show system information show hardware information Displays information about the hardware.
5: Commands and Levels EDS- MD Comm and Referenc e 79 disconnect (tunnel-disconnect:7) level co mmands clrscrn Clears the screen. exit Returns to the tunnel level. flush serial disable Does not flush serial data upon closing a tunneling connection. flush serial enable Flushes serial data buffer when a tunneling connection is closed.
5: Commands and Levels EDS- MD Comm and Referenc e 80 A hex value character has the form 0xFF. timeout <milliseconds> Disconnects when no data has been received on the line (serial port) for the specified length of time. <milliseconds> = timeout in milliseconds.
5: Commands and Levels EDS- MD Comm and Referenc e 81 show history Displays the last 20 commands entered during the current CLI session. stop character <control> Sets the stop character. The character may be input as text, control, decimal, or hex .
5: Commands and Levels EDS- MD Comm and Referenc e 82 modem control enable Watches the modem control pin and disconnects if it is n ot asserted. no stop character Removes the stop character. no timeout Disables disconnect after timeout feature for tunneling se s- sions.
5: Commands and Levels EDS- MD Comm and Referenc e 83 show Show DNS status. show history Displays the last 20 commands entered during the current CLI ses sion. write Stores the current configuration in permanent memory. email 1 (email:1) level commands auto show statistics Continuously displays email statistics.
5: Commands and Levels EDS- MD Comm and Referenc e 84 <number> = port used for SMTP on the server side. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show log Displays the email log.
5: Commands and Levels EDS- MD Comm and Referenc e 85 priority urgent Sets X-Priority for email alerts to 1 (urgent). priority very low Sets X-Priority for email alerts to 5 (very low). reply to <text> Sets the Reply To address for email alerts .
5: Commands and Levels EDS- MD Comm and Referenc e 86 send an email alert instead of the device’s domain name in EHLO. <t ext> = domain name to override the current domain name in EHLO. priority high Sets X-Priority for email alerts to 2 (high).
5: Commands and Levels EDS- MD Comm and Referenc e 87 no message file Removes the file name, so the message body will be e mpty. no overriding domain Removes the overriding domain name option. no reply to Removes the Reply To address for email alerts.
5: Commands and Levels EDS- MD Comm and Referenc e 88 message file <text> Specifies a text file, the conten ts of w hich will be th e message body of an email alert. <text> = the name of a local file. no cc Removes the Cc addresses for email alerts.
5: Commands and Levels EDS- MD Comm and Referenc e 89 email <number> Enters the configure email level. exit Exits to the enable level. from <text> Sets the From address for email alerts. <text> = email address to place in the From field of the e mail alert.
5: Commands and Levels EDS- MD Comm and Referenc e 90 clear log Clears all entries from the mail log. clear mail counters Sets the email counters to zero. clrscrn Clears the screen. default local port Sets the local port (used to send email alerts) to random.
5: Commands and Levels EDS- MD Comm and Referenc e 91 to <text> Sets To addresses for email alerts. <text> = a quoted, semicolon separated list of email add resses. write Stores the current configuration in permanent memory. email 16 (email:16) level commands auto show statistics Continuously displays email statistics.
5: Commands and Levels EDS- MD Comm and Referenc e 92 show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show log Displays the email log. show statistics Displays email statistics.
5: Commands and Levels EDS- MD Comm and Referenc e 93 priority very low Sets X-Priority for email alerts to 5 (very low). reply to <text> Sets the Reply To address for email alerts . <text> = email address to place in the Repl y To field of the email alert.
5: Commands and Levels EDS- MD Comm and Referenc e 94 EHLO. <text> = domain name to override the curren t domain name in EHLO. priority high Sets X-Priority for email alerts to 2 (high). priority low Sets X-Priority for email alerts to 4 (low). priority normal Sets X-Priority for email alerts to 3 (normal).
5: Commands and Levels EDS- MD Comm and Referenc e 95 no overriding domain Removes the overriding domain name option. no reply to Removes the Reply To address for email alerts. no subject Removes subject used for email alerts. no to Removes the To addresses for email alerts .
5: Commands and Levels EDS- MD Comm and Referenc e 96 body of an email alert. <text> = the name of a local file. no cc Removes the Cc addresses for email alerts. no clear mail counters Restores the email counters to the aggregate values. no from Removes the From address for email alerts.
5: Commands and Levels EDS- MD Comm and Referenc e 97 exit Exits to the enable level. from <text> Sets the From address for email alerts. <text> = email address to place in the From field of the email alert. local port <number> Sets the local port used to send email alerts.
5: Commands and Levels EDS- MD Comm and Referenc e 98 clear mail counters Sets the email counters to zero. clrscrn Clears the screen. default local port Sets the local port (used to send email alerts) to random. default priority Sets X-Priority for email alerts to 3 (normal).
5: Commands and Levels EDS- MD Comm and Referenc e 99 <text> = a quoted, semicolon separated list of email addresses. write Stores the current configuration in permanent memory. email 8 (email:8) level commands auto show statistics Continuously displays email statistics.
5: Commands and Levels EDS- MD Comm and Referenc e 100 show history Displays the last 20 commands entered during the current CLI session. show log Displays the email log. show statistics Displays email statistics. subject <text> Sets the Subject for email alerts.
5: Commands and Levels EDS- MD Comm and Referenc e 101 reply to <text> Sets the Reply To address for email alerts . <text> = email address to place in the Repl y To field of the email alert. send Sends an email using the current settings .
5: Commands and Levels EDS- MD Comm and Referenc e 102 ssh <optClientUsername> <host> Begin SSH session on network <host>. The optClientUserName must match an SSH Client: Users conf i- guration entry. Use "" in optClientUserName to prompt for host username and password.
5: Commands and Levels EDS- MD Comm and Referenc e 103 show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics Displays the FTP statistics. state disable Disables the FTP server.
5: Commands and Levels EDS- MD Comm and Referenc e 104 tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tunneling. protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 105 connections. no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection.
5: Commands and Levels EDS- MD Comm and Referenc e 106 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 107 vip n ame <text> Sets the VIP name. write Stores the current configuration in permanent memory. host 1 (tunnel-connect-host:5:1) level commands address <text> Sets the remote host to establish tunneling connections with.
5: Commands and Levels EDS- MD Comm and Referenc e 108 show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 109 no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling.
5: Commands and Levels EDS- MD Comm and Referenc e 110 Note that quotes must enclose the value if i t contains spaces. auto show statistics show connection statistics clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client.
5: Commands and Levels EDS- MD Comm and Referenc e 111 aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctu a- tion: 123 ABC "12 3A BC" 12,3A,BC 12.
5: Commands and Levels EDS- MD Comm and Referenc e 112 connections with other devices. <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds.
5: Commands and Levels EDS- MD Comm and Referenc e 113 <number> = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 114 show history Displays the last 20 commands entered during the current CLI session. ssh username <text> Sets the username for logging into the host via SSH. <text> = username. write Stores the current configuration in permanent memory.
5: Commands and Levels EDS- MD Comm and Referenc e 115 protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling. show Sh ows the current configuration. show history Displays the last 20 commands entered during the current CLI session.
5: Commands and Levels EDS- MD Comm and Referenc e 116 no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection. no port Removes the remote port used to establish tunnel connections . no ssh username Removes the SSH user name.
5: Commands and Levels EDS- MD Comm and Referenc e 117 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 118 host 10 (tunnel-connect-host:5:10) level commands address <text> Sets the remote host to establish tunneling connections with. <text> = IP address or host name of the remote host. aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 119 session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices. <text> = SSH user name.
5: Commands and Levels EDS- MD Comm and Referenc e 120 no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling. <number> = number of the port to use.
5: Commands and Levels EDS- MD Comm and Referenc e 121 auto show statistics show connection statistics clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default protocol as "TCP".
5: Commands and Levels EDS- MD Comm and Referenc e 122 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 123 <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds. val idate certificate disable Skips verification of the server certificate whe n connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 124 protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mo de tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 125 ssh username <text> Sets the username for logging into the host via SSH. <text> = username.
5: Commands and Levels EDS- MD Comm and Referenc e 126 tunneling. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 127 no port Removes the remote port used to establish tunnel connections. no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name.
5: Commands and Levels EDS- MD Comm and Referenc e 128 aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a single characte r. Note that quotes must enclose the value if it contains spaces.
5: Commands and Levels EDS- MD Comm and Referenc e 129 <text> = IP address or host name of the remote host. aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits.
5: Commands and Levels EDS- MD Comm and Referenc e 130 ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices. <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and set s the timer.
5: Commands a nd Levels EDS- MD Comm and Referenc e 131 port <number> Sets the remote port to use for connect mode tunneling. <number> = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 132 credentials <text> Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default protocol as "TCP". default tcp keep alive Restores the default 45 second connect mode TCP keep alive timeout.
5: Commands and Levels EDS- MD Comm and Referenc e 133 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 134 the timer. <milliseconds> = timer value, in milliseconds. validate certificate disable Skips verification of the server certificate whe n connecting. validate certificate enable Requires verification of the server certificate when connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 135 protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tun neling. protocol udp Uses UDP protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 136 write Stores the current configuration in permanent memory. host 12 (tunnel-connect-host:8:12) level commands address <text> Sets the remote host to establish tunneling connections with. <text> = IP address or host name of the remote host.
5: Commands and Levels EDS- MD Comm and Referenc e 137 show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 138 no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling. <number> = number of the port to use.
5: Commands and Levels EDS- MD Comm and Referenc e 139 auto show statistics show connection statistics clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default protocol as "TCP".
5: Commands and Levels EDS- MD Comm and Referenc e 140 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands a nd Levels EDS- MD Comm and Referenc e 141 <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds. validate certificate disable Skips verification of the server certificate whe n connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 142 protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 143 timeout. exit Exits to the next higher level. no address Removes the remote host address used to establish tunneling connections. no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y.
5: Commands and Levels EDS- MD Comm and Referenc e 144 Each byte is represented by a single character. Note that quotes must enclose the value if i t contains spaces. aes encrypt key <hexadecimal> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 145 validate certificate enable Requires verification of the server certificate when connecting. vip disable Makes connections using the specified Address. vip enable Makes connections using the VIP name.
5: Commands and Levels EDS- MD Comm and Referenc e 146 protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session.
5: Commands and Levels EDS- MD Comm and Referenc e 147 <text> = IP address or host name of the remote host. aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits.
5: Commands and Levels EDS- MD Comm and Referenc e 148 ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices. <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer.
5: Commands and Levels EDS- MD Comm and Referenc e 149 port <number> Sets the remote port to use for connect mode tunn eling. <number> = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 150 credentials <text> Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default protocol as "TCP". default tcp keep alive Restores the default 45 second connect mode TCP keep alive timeout.
5: Commands and Levels EDS- MD Comm and Referenc e 151 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 152 the timer. <milliseconds> = timer value, in millisecond s. validate certificate disable Skips verification of the server certificate whe n connecting. validate certificate enable Requires verification of the server certificate when connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 153 protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tun neling. protocol udp Uses UDP protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 154 no address Removes the remote host address used to establish tunneling connections. no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y.
5: Commands and Levels EDS- MD Comm and Referenc e 155 Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces.
5: Commands and Levels EDS- MD Comm and Referenc e 156 vip enable Makes connections using the VIP name. vip name <text> Sets the VIP name. write Stores the current configuration in permanent memory. host 13 (tunnel-connect-host:1:13) level commands address <text> Sets the remote host to establish tunneling connections with.
5: Commands and Levels EDS- MD Comm and Referenc e 157 tunneling. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 158 Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces.
5: Commands and Levels EDS- MD Comm and Referenc e 159 with other devices. <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds.
5: Commands and Levels EDS- MD Comm and Referenc e 160 protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneli ng. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 161 default tcp keep alive Restores the default 45 second connect mode TCP keep alive timeout. exit Exits to the next higher level. no address Removes the remote host address used to establish tunneling connections.
5: Commands and Levels EDS- MD Comm and Referenc e 162 aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single characte r. Note that quotes must enclose the value if i t contains spaces.
5: Commands and Levels EDS- MD Comm and Referenc e 163 validate certificate disable Skips verification of the server certificate whe n connecting. validate certificate enable Requires verification of the server certificate when connecting. vip disable Makes connections using the specified Address.
5: Commands and Levels EDS- MD Comm and Referenc e 164 protocol telnet Uses Telnet protocol (with IAC) for connect mode tun neling. protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 165 no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection. no port Removes the remote port used to establish tunnel connections.
5: Commands and Levels EDS- MD Comm and Referenc e 166 tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 167 write Stores the current configuration in permanent memory. host 14 (tunnel-connect-host:1:14) level commands address <text> Sets the remote host to establish tunneling connections with. <text> = IP address or host name of the remote host.
5: Commands and Levels EDS- MD Comm and Referenc e 168 show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 169 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 170 the timer. <milliseconds> = timer value, in milliseconds. validate certificate disable Skips verification of the server certificate whe n connecting. validate certificate enable Requires verification of the server certificate when connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 171 protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tun n eling. protocol udp Uses UDP protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 172 no address Removes the remote host address used to establish tunneling connections. no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y.
5: Commands and Levels EDS- MD Comm and Referenc e 173 Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces.
5: Commands and Levels EDS- MD Comm and Referenc e 174 vip enable Makes connections using the VIP name. vip name <text> Sets the VIP name. write Stores the current configuration in permanent memory. host 15 (tunnel-connect-host:4:15) level commands address <text> Sets the remote host to establish tunneling connections with.
5: Commands and Levels EDS- MD Comm and Referenc e 175 tunneling. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 176 no port Removes the remote port used to establish tunnel connections . no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name.
5: Commands and Levels EDS- MD Comm and Referenc e 177 aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a single characte r. Note that quotes must enclose the value if i t contains spaces.
5: Commands and Levels EDS- MD Comm and Referenc e 178 <text> = IP address or host name of the remote host. aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits.
5: Commands and Levels EDS- MD Comm and Referenc e 179 ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices. <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer.
5: Commands a nd Levels EDS- MD Comm and Referenc e 180 Each byte is represented by a single characte r. Note that quotes must enclose the value if i t contains spaces. aes encrypt key <hexadecimal> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 181 validate certificate enable Requires verification of the server certificate when connecting. vip disable Makes connections using the specified Address. vip enable Makes connections using the VIP name.
5: Commands and Levels EDS- MD Comm and Referenc e 182 protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session.
5: Commands and Levels EDS- MD Comm and Referenc e 183 no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection. no port Removes the remote port used to establish tunnel connections . no ssh username Removes the SSH user name.
5: Commands and Levels EDS- MD Comm and Referenc e 184 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 185 host 16 (tunnel-connect-host:4:16) level commands address <text> Sets the remote host to establish tunneling connections with. <text> = IP address or host name of the remote host. aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 186 session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices. <text> = SSH user name.
5: Commands and Levels EDS- MD Comm and Referenc e 187 no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling. <number> = number of the port to use.
5: Commands and Levels EDS- MD Comm and Referenc e 188 auto show statistics show connection statistics clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default protocol as "TCP".
5: Commands and Levels EDS- MD Comm and Referenc e 189 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands a nd Levels EDS- MD Comm and Referenc e 190 <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds. va lidate certificate disable Skips verification of the server certificate whe n connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 191 no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH. protocol telnet Sets the protocol to Telnet. remote address <text> Sets the IP address of the remote host to connect to when this host is selected on the login connect menu.
5: Commands and Levels EDS- MD Comm and Referenc e 192 host <number> Ch ange to config host level name <text> Sets the name of the host. <text> = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host.
5: Commands and Levels EDS- MD Comm and Referenc e 193 no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection. no port Removes the remote port used to establish tunnel connections . no ssh username Removes the SSH user name.
5: Commands and Levels EDS- MD Comm and Referenc e 194 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 195 host 2 (tunnel-connect-host:6:2) level commands address <text> Sets the remote host to establish tunneling connections with. <text> = IP address or host name of the remote host. aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 196 session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices. <text> = SSH user name.
5: Commands and Levels EDS- MD Comm and Referenc e 197 no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling. <number> = number of the port to use.
5: Commands and Levels EDS- MD Comm and Referenc e 198 auto show statistics show connection statistics clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default protocol as "TCP".
5: Commands and Levels EDS- MD Comm and Referenc e 199 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 200 <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds. validate certificate disable Skips verification of the server certificate whe n connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 201 protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 202 timeout. exit Exits to the next higher level. no address Removes the remote host address used to establish tunneling connections. no aes decrypt key Removes the connect tunnel AES decrypt key. no aes encrypt key Removes the connect tunnel AES encrypt ke y.
5: Commands and Levels EDS- MD Comm and Referenc e 203 no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH.
5: Commands and Levels EDS- MD Comm and Referenc e 204 which depends on the selected protocol. exit Exits to the configuration level. host <number> Change to config host level name <text> Sets the name of the host. <text> = name of the host.
5: Commands and Levels EDS- MD Comm and Referenc e 205 host 23 (config- hos t:23) level commands clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the d e- fault value, which depends on the selected protocol.
5: Commands and Levels EDS- MD Comm and Referenc e 206 show history Displays the last 20 commands entered during the current CLI session. ssh username <text> Sets the username for logging into the host via SSH. <text> = username. write Stores the current configuration in permanent memory.
5: Commands and Levels EDS- MD Comm and Referenc e 207 selected on the login connect menu. <text> = IP address. remote port <number> Sets the remote port used to connect to the h ost. <number> = port to be used. show Displays the current configuration.
5: Commands and Levels EDS- MD Comm and Referenc e 208 no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SS H. protocol telnet Sets the protocol to Telnet. remote address <text> Sets the IP address of the remote host to connect to when this host is selected on the login connect menu.
5: Commands and Levels EDS- MD Comm and Referenc e 209 Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single characte r.
5: Commands and Levels EDS- MD Comm and Referenc e 210 <milliseconds> = timer value, in milliseconds. validate certificate disable Skips verification of the server certificate whe n connecting. validate certificate enable Requires verification of the server certificate when connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 211 tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tun neling. protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 212 connections. no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection.
5: Commands and Levels EDS- MD Comm and Referenc e 213 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 214 vip name <text> Sets the VIP name. write Stores the current configuration in permanent memory. host 3 (tunnel-connect-host:4:3) level commands address <text> Sets the remote host to establish tunneling connections with.
5: Commands and Levels EDS- MD Comm and Referenc e 215 show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 216 no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling.
5: Commands and Levels EDS- MD Comm and Referenc e 217 Note that quotes must enclose the value if i t contains spaces. auto show statistics show connection statistics clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client.
5: Commands and Levels EDS- MD Comm and Referenc e 218 aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.
5: Commands and Levels EDS- MD Comm and Referenc e 219 connections with other devices. <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds.
5: Commands and Levels EDS- MD Comm and Referenc e 220 no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH.
5: Commands and Levels EDS- MD Comm and Referenc e 221 which depends on the selected protocol. exit Exits to the configuration level. host <number> Change to config host level name <text> Sets the name of the host. <text> = name of the host.
5: Commands and Levels EDS- MD Comm and Referenc e 222 connections. no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection.
5: Commands and Levels EDS- MD Comm and Referenc e 223 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 224 vip name <text> Sets the VIP name. write Stores the current configuration in permanent memory. host 4 (tunnel-connect- ho st:6:4) level commands address <text> Sets the remote host to establish tunneling connections with.
5: Commands and Levels EDS- MD Comm and Referenc e 225 show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 226 no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling.
5: Commands and Levels EDS- MD Comm and Referenc e 227 Note that quotes must enclose the value if it contains spaces. auto show statistics show connection statistics clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client.
5: Commands and Levels EDS- MD Comm and Referenc e 228 aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.
5: Commands a nd Levels EDS- MD Comm and Referenc e 229 connections with other devices. <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds.
5: Commands and Levels EDS- MD Comm and Referenc e 230 <number> = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 231 default protocol Restores the default protocol as "TCP". default tcp keep alive Restores the default 45 second connect mode TCP keep alive timeout. exit Exits to the next higher level. no address Removes the remote host address used to establish tunneling connections.
5: Commands and Levels EDS- MD Comm and Referenc e 232 name <text> Sets the name of the host. <text> = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host.
5: Commands and Levels EDS- MD Comm and Referenc e 233 no credentials Clears the RSA/DSA certificate selection. no port Removes the remote port used to establish tunnel connections . no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode TCP keep alive timeout.
5: Commands and Levels EDS- MD Comm and Referenc e 234 Note that quotes must enclose the value if i t contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a single character.
5: Commands and Levels EDS- MD Comm and Referenc e 235 address <text> Sets the remote host to establish tunneling connections with. <text> = IP address or host name of the remote host. aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 236 show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices. <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer.
5: Commands and Levels EDS- MD Comm and Referenc e 237 no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling. <number> = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 238 clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default protocol as "TCP". default tcp keep alive Restores the default 45 second connect mode TCP keep alive timeout.
5: Commands a nd Levels EDS- MD Comm and Referenc e 239 tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 240 tcp keep alive <millisecond s> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds. validate certificate disable Skips verification of the server certificate whe n connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 241 protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tun neling.
5: Commands and Levels EDS- MD Comm and Referenc e 242 exit Exits to the next higher level. no address Removes the remote host address used to establish tunneling connections. no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y.
5: Commands and Levels EDS- MD Comm and Referenc e 243 no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. protocol ssh Sets the protocol to SSH. protocol telnet Sets the protocol to Telnet.
5: Commands and Levels EDS- MD Comm and Referenc e 244 no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling. <number> = number of the port to use.
5: Commands and Levels EDS- MD Comm and Referenc e 245 auto show statistics show connection statistics clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default protocol as "TCP".
5: Commands and Levels EDS- MD Comm and Referenc e 246 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 247 <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds. validate certificate disable Skips verification of the server certificate whe n connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 248 protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 249 timeout. exit Exits to the next higher level. no address Removes the remote host address used to establish tunneling connections. no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y.
5: Commands and Levels EDS- MD Comm and Referenc e 250 Each byte is represented by a single character. Note that quotes must enclose the value if i t contains spaces. aes encrypt key <hexadecimal> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 251 validate certificate enable Requires verification of the server certificate when connecting. vip disable Makes connections using the specified Address. vip enable Makes connections using the VIP name.
5: Commands and Levels EDS- MD Comm and Referenc e 252 protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session.
5: Commands and Levels EDS- MD Comm and Referenc e 253 no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection. no port Removes the remote port used to establish tunnel connections . no ssh username Removes the SSH user name.
5: Commands and Levels EDS- MD Comm and Referenc e 254 protocol telnet Sets the protocol to Telnet. remote address <text> Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. <text> = IP address.
5: Commands and Levels EDS- MD Comm and Referenc e 255 <number> = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 256 default protocol Restores the default protocol as "TCP". default tcp keep alive Restores the default 45 second connect mode TCP keep alive timeout. exit Exits to the next higher level. no address Removes the remote host address used to establish tunneling connections.
5: Commands and Levels EDS- MD Comm and Referenc e 257 Note that quotes must enclose the value if i t contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single characte r.
5: Commands and Levels EDS- MD Comm and Referenc e 258 <milliseconds> = timer value, in milliseconds. validate certificate disable Skips verification of the server certificate whe n connecting. validate certificate enable Requires verification of the server certificate when connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 259 tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tun neling. protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 260 connections. no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection.
5: Commands and Levels EDS- MD Comm and Referenc e 261 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 262 vip name <text> Sets the VIP name. write Stores the current configuration in permanent memory. host 7 (tunnel-connect-host:2:7) level commands address <text> Sets the remote host to establish tunneling connections with.
5: Commands and Levels EDS- MD Comm and Referenc e 263 show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 264 no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunn eling.
5: Commands and Levels EDS- MD Comm and Referenc e 265 <text> = IP address. remote port <number> Sets the remote port used to connect to the h ost. <number> = port to be used. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session.
5: Commands and Levels EDS- MD Comm and Referenc e 266 protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tun neling.
5: Commands and Levels EDS- MD Comm and Referenc e 267 exit Exits to the next higher level. no address Removes the remote host address used to establish tunneling connections. no aes decrypt k ey Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y.
5: Commands and Levels EDS- MD Comm and Referenc e 268 aes encrypt key <hexadecimal> Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.
5: Commands and Levels EDS- MD Comm and Referenc e 269 vip enable Makes connections using the VIP name. vip name <text> Sets the VIP name. write Stores the current configuration in permanent memory. host 8 (tunnel-connect-host:5:8) level commands address <text> Sets the remote host to establish tunneling connections with.
5: Commands and Levels EDS- MD Comm and Referenc e 270 tunneling. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 271 no port Removes the remote port used to establish tunnel connections. no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name.
5: Commands and Levels EDS- MD Comm and Referenc e 272 aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a single characte r. Note that quotes must enclose the value if i t contai ns spaces.
5: Commands and Levels EDS- MD Comm and Referenc e 273 <text> = IP address or host name of the remote host. aes decrypt key <hexadecimal> Sets the connect tunnel AES decrypt key with up to 16 byte s. Each byte is represented by two adjacent hex digits.
5: Commands and Levels EDS- MD Comm and Referenc e 274 ss h username <text> Sets the SSH user name for use when establishing tunneling connections with other devices. <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer.
5: Commands and Levels EDS- MD Comm and Referenc e 275 port <number> Sets the remote port to use for connect mode tunn eling. <n umber> = number of the port to use. protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protocol for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 276 show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. ssh username <text> Sets the username for logging into the host via SSH.
5: Commands and Levels EDS- MD Comm and Referenc e 277 protocol telnet Uses Telnet protocol (with IAC) for connect mode tun neling. protocol udp Uses UDP protocol for connect mode tunneling. protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling.
5: Commands a nd Levels EDS- MD Comm and Referenc e 278 no aes decrypt key Removes the connect tunnel AES decrypt ke y. no aes encrypt key Removes the connect tunnel AES encrypt ke y. no credentials Clears the RSA/DSA certificate selection. no port Removes the remote port used to establish tunnel connections .
5: Commands and Levels EDS- MD Comm and Referenc e 279 tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if i t contains spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 280 write Stores the current configuration in permanent memory. host 9 (tunnel-connect-host:5:9) level commands address <text> Sets the remote host to establish tunneling connections with. <text> = IP address or host name of the remote host.
5: Commands and Levels EDS- MD Comm and Referenc e 281 show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username <text> Sets the SSH user name for use when establishing tunneling connections with other devices.
5: Commands and Levels EDS- MD Comm and Referenc e 282 no tcp keep alive Disables the connect mode TCP keep alive timeout. no vip name Removes the VIP name. port <number> Sets the remote port to use for connect mode tunnelin g. <number> = number of the port to use.
5: Commands and Levels EDS- MD Comm and Referenc e 283 auto show statistics show connection statistics clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by name for the SSL client. default protocol Restores the default protocol as "TCP".
5: Commands and Levels EDS- MD Comm and Referenc e 284 Bytes may run together or be separated by optional punctu a- tion: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16 bytes.
5: Commands and Levels EDS- MD Comm and Referenc e 285 <text> = SSH user name. tcp keep alive <milliseconds> Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> = timer value, in milliseconds. validate certificate disable Skips verification of the server certificate whe n connecting.
5: Commands and Levels EDS- MD Comm and Referenc e 286 protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protocol for connect mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for connect mode tunneling.
5: Commands and Levels EDS- MD Comm and Referenc e 287 ssh username <text> Sets the username for logging into the host via SSH. <text> = username. write Stores the current configuration in permanent memory. http (config-http) level commands auth <uri> Creates a new HTTP server authentication di rective.
5: Commands a nd Levels EDS- MD Comm and Referenc e 288 %q query string (prepend with '?' or empty '- ') %t timestamp HH:MM:SS (same as Apache '%(%H:%M:%S)t') %u remote u.
5: Commands and Levels EDS- MD Comm and Referenc e 289 if 1 (config-if:eth0) level commands bootp disable Disables BOOTP. bootp enable Enables BOOTP. clrscrn Clears the screen. default gateway <IP address> Sets the configurable gateway IP address to th e default value.
5: Commands and Levels EDS- MD Comm and Referenc e 290 session. write Stores the current configuration in permanent memory. line 1 (line:1) level commands auto show statistics Continuously displays line statistics. baud rate <bits per second> Sets the line speed.
5: Commands and Levels EDS- MD Comm and Referenc e 291 name <text> Sets the name for this line. no clear line counters Restores the serial counters to the aggregate values.
5: Commands and Levels EDS- MD Comm and Referenc e 292 baud rate <bits per second> Sets the line speed. <bits per second> = the speed. Standard speeds include 1200, 2400, 4800, 9600, 19200, and so on. clear line counters Sets the serial counters to zero.
5: Commands and Levels EDS- MD Comm and Referenc e 293 entering command mode. no gap timer Removes the gap timer, so forwarding depends on the line speed. no name Removes the name of this line. parity even Uses a parity bit on the line for even parity.
5: Commands and Levels EDS- MD Comm and Referenc e 294 clear line counters Sets the serial counters to zero. clrscrn Clears the screen. command mode always Sets the current line to always be in command mode. command mode echo serial string disable Disables user-defined serial boot string to be echoed in the CLI.
5: Commands and Levels EDS- MD Comm and Referenc e 295 no n ame Removes the name of this line. parity even Uses a parity bit on the line for even parity. parity none Does not use a parity bit on the line. parity odd Uses a parity bit on the line for odd parity.
5: Commands and Levels EDS- MD Comm and Referenc e 296 command mode echo serial string enable Enables user-defined serial boot string to be echoed in the CLI. command mode serial string Enables user to enter a custom string at boot time to enter command mode.
5: Commands and Levels EDS- MD Comm and Referenc e 297 protocol none Uses no protocol on the line. protocol tunnel Applies tunnel protocol on the line. reassert Asserts line status with current configured values. show Displays the current status. show command mode Shows the command mode settings for the current line.
5: Commands and Levels EDS- MD Comm and Referenc e 298 mand mode. <string> = text with possible binary characters. Within [] use binary decimal up to 255 or hex up to 0xFF.
5: Commands and Levels EDS- MD Comm and Referenc e 299 show command mode Shows the command mode settings for the current line. show history Displays the last 20 commands entered during the current CLI session. show line Displays the current configuration.
5: Commands and Levels EDS- MD Comm and Referenc e 300 the device boots and when the line is in command mode. <string> = text with possible binary characters. Within [] use binary decimal up to 255 or hex up to 0xFF. command mode wait time <milliseconds> Sets boot-up wait time for command mode serial string.
5: Commands and Levels EDS- MD Comm and Referenc e 301 show statistics Shows the line statistics. state disable Disables the line so data cannot be sen t/received. state enable Enables the line so data can be sent/received. stop bits 1 Uses one stop bit after data on the line.
5: Commands and Levels EDS- MD Comm and Referenc e 302 <milliseconds> = wait time. configure current settings Configures line with the current value of settings . data bits 7 Uses seven bits for data on the line. da ta bits 8 Uses eight bits for data on the line.
5: Commands and Levels EDS- MD Comm and Referenc e 303 stop bits 2 Uses two stop bits after data on the line. terminal <line> Enters the configure-terminal level. <line> = number of the terminal line (se rial port) to be conf i- gured. terminal network Enters the configure-terminal level for the network.
5: Commands and Levels EDS- MD Comm and Referenc e 304 default baud rate Restores the default speed of 9600 bits per second. default data bits Restores the default of eight data bits. default flow control Restores the default of no flow control. default parity Restores the default of no parity.
5: Commands and Levels EDS- MD Comm and Referenc e 305 threshold <bytes> Sets the threshold in bytes. After this many bytes are received, they are forwarded without delay. tunnel <line> Enters the tunnel level. <line> = number of the tunnel line (serial port) to be conf i- gured.
5: Commands and Levels EDS- MD Comm and Referenc e 306 connect string <text> Sets the CONNECT string used in modem emulation. <string> = connect string. default incoming connection Default disables incoming network connections. default response type Default uses text type responses.
5: Commands and Levels EDS- MD Comm and Referenc e 307 incoming connection automatic Automatically answer incoming network connections . incoming connection disabled Disable incoming network connections. incoming connection manual Wait for an ATA command before answering an incoming ne t- work connection.
5: Commands and Levels EDS- MD Comm and Referenc e 308 write Stores the current configuration in permanent memory. modem (tunnel-modem:5) level commands clrscrn Clears the screen. connect string <text> Sets the CONNECT string used in modem emulation.
5: Commands and Levels EDS- MD Comm and Referenc e 309 error unknown commands disable Returns OK on unknown AT commands. error unknown commands enable Returns an error upon unknown AT commands. exit Returns to the tunnel level. incoming connection automatic Automatically answer incoming network connections.
5: Commands and Levels EDS- MD Comm and Referenc e 310 show status Displays tunnel modem status. verbose response disable Does not send Modem Response Codes. verbose response enable Sends Modem Response Codes out on the Serial Line. write Stores the current configuration in permanent memory.
5: Commands and Levels EDS- MD Comm and Referenc e 311 echo pluses disable Does not echo the +++ characters when entering modem command mode. echo pluses enable Echoes the +++ characters when entering modem command mode. error unknown commands disable Returns OK on unknown AT commands.
5: Commands and Levels EDS- MD Comm and Referenc e 312 <bytes> = number of bytes in the threshold. timeout <milliseconds> Sets the timeout value for packing mode in millise conds. <milliseconds> = timeout value, in milli seconds. trailing character <control> Sets the trailing character for packing mode.
5: Commands and Levels EDS- MD Comm and Referenc e 313 exit Returns to the tunnel level. no trailing character Removes the trailing character for packing mode .
5: Commands and Levels EDS- MD Comm and Referenc e 314 session. threshold <bytes> Sets the threshold (byte count). If the queued data reaches this threshold then the data will be sent. <bytes> = number of bytes in the threshold. timeout <milliseconds> Sets the timeout value for packing mode in millise conds.
5: Commands and Levels EDS- MD Comm and Referenc e 315 default send character Removes the send character for packing mode. default threshold Restores the default threshold. default timeout Restores the default packing mode time out. exit Returns to the tunnel level.
5: Commands and Levels EDS- MD Comm and Referenc e 316 A hex value character has the form 0xFF. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. threshold <bytes> Sets the threshold (byte count).
5: Commands and Levels EDS- MD Comm and Referenc e 317 password (tunnel-accept-password:8) level command s clrscrn Clears the screen. exit Exits to the next higher level. no password Removes the password so connections will be accepted uncha l- lenged.
5: Commands and Levels EDS- MD Comm and Referenc e 318 write Stores the current configuration in permanent memory. password (tunnel-accept-password:5) level command s clrscrn Clears the screen. exit Exits to the next higher level. no password Removes the password so connections will be accepted uncha l- lenged.
5: Commands and Levels EDS- MD Comm and Referenc e 319 session. write Stores the current configuration in permanent memory. password (tunnel-accept-password:2) level command s clrscrn Clears the screen. exit Exits to the next higher level. no password Removes the password so connections will be accepted uncha l- lenged.
5: Commands and Levels EDS- MD Comm and Referenc e 320 enable Enters the enable level. exit Exit from the system ping <host> Ping destination continuously with 5 second timeout ping <host>.
5: Commands and Levels EDS- MD Comm and Referenc e 321 show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. serial (tunnel-serial:7) level commands clrscrn Clears the screen.
5: Commands and Levels EDS- MD Comm and Referenc e 322 nection is active. dtr continuously asserted Asserts DTR regardless of any connections. dtr truport Asserts DTR to match remote DSR when connected via Telnet. dtr unasserted Does not assert DTR. exit Returns to the tunnel level.
5: Commands and Levels EDS- MD Comm and Referenc e 323 write Stores the current configuration in permanent memory. server (ssh-server) level commands authorized user <username> <password> Sets authorized username, password, and optionall y RSA and/or DSA public keys clrscrn Clears the screen.
5: Commands and Levels EDS- MD Comm and Referenc e 324 default max sessions Restores the default maximum allowed concurrent incoming SSH sessions. default port Restores the default local port to the SSH se rver. exit Exits to the CLI level. max sessions <number> Sets the maximum allowed concurrent incoming SSH sessions .
5: Commands and Levels EDS- MD Comm and Referenc e 325 state enable Enables syslog logging. write Stores the current configuration in permanent memory. telnet (config-cli-telnet) level commands authentication disable No password required for Telnet users.
5: Commands and Levels EDS- MD Comm and Referenc e 326 send break <control> Sets the optional send break character. <text> = the character. The character may be input as text, control, decimal, or hex . A control character has the form <control>C.
5: Commands a nd Levels EDS- MD Comm and Referenc e 327 show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. terminal <line> Enters the configure-terminal level. <line> = number of the terminal line (se rial port) to be conf i- gured.
5: Commands and Levels EDS- MD Comm and Referenc e 328 gured. terminal network Enters the configure-terminal level for the network. terminal type <text> Sets the terminal type. tunnel <line> Enters the tunnel level. <line> = number of the tunnel line (serial port) to be conf i- gured.
5: Commands and Levels EDS- MD Comm and Referenc e 329 gured. write Stores the current configuration in permanent memory. terminal 5 (config-terminal:5) level co mmands break duration <milliseconds> Sets how long a break should last when it is being sent to the line.
5: Commands and Levels EDS- MD Comm and Referenc e 330 <milliseconds> = number of milliseconds. clrscrn Clears the screen. default break duration Restores the break duration to the default value (500 ms). default terminal type Sets the default terminal type, "UNKNOWN".
5: Commands and Levels EDS- MD Comm and Referenc e 331 line. echo enable Enables echoing of characters received on the line back to the line. exit Exits to the configuration level. exit connect menu disable On the login connect menu, removes the menu item allowing the user to exit to the CLI.
5: Commands and Levels EDS- MD Comm and Referenc e 332 the user to exit to the CLI. exit connect menu enable On the login connect menu, inserts the menu item allowing the user to exit to the CLI. line <line> Enters the line level. <line> = number of the line (serial port) to be configured.
5: Commands and Levels EDS- MD Comm and Referenc e 333 line <line> Enters the line level. <line> = number of the line (serial port) to be configured. login connect menu disable Disables the login connect menu, so a user wil l get the CLI i m- mediately after logging in.
5: Commands and Levels EDS- MD Comm and Referenc e 334 modem Enters the modem level for this tunnel. no clear counters Unzeros all tunnel counters packing Enters the packing level for this tunnel. serial Enters the serial level for this tunnel. show history Displays the last 20 commands entered during the current CLI session.
5: Commands and Levels EDS- MD Comm and Referenc e 335 line <line> Enters the line level. <line> = number of the line (serial port) to be configured. modem Enters the modem level for this tunnel. no clear counters Unzeros all tunnel counters packing Enters the packing level for this tunnel.
5: Commands and Levels EDS- MD Comm and Referenc e 336 disconnect Enters the disconnect level for this tunnel. exit Exits to the enable level. li ne <line> Enters the line level. <line> = number of the line (serial port) to be configured. modem Enters the modem level for this tunnel.
5: Commands a nd Levels EDS- MD Comm and Referenc e 337 clrscrn Clears the screen. connect Enters the connect level for this tunnel. disconnect Enters the disconnect level for this tunnel. exit Exits to the enable level. line <line> Enters the line level.
5: Commands and Levels EDS- MD Comm and Referenc e 338 auto show status Displays VIP status continuously. clear counters Sets the VIP counters to zero. clrscrn Clears the screen. exit Exits to the configuration level. no clear counters Restores the VIP counters to the aggreg ate values.
デバイスLantronix EDS-MD8の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Lantronix EDS-MD8をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLantronix EDS-MD8の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lantronix EDS-MD8の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lantronix EDS-MD8で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lantronix EDS-MD8を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLantronix EDS-MD8の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lantronix EDS-MD8に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLantronix EDS-MD8デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
