Lava Computerメーカー650の使用説明書/サービス説明書
ページ先へ移動 of 20
La v aP ort 650 Installation Manual Rev . B01 LAV A COMPUTERS SSERIAL PCI P .N. MOKO L74.1 MADE IN CANADA PNMOKO S-1 MADEIN JAPAN 0255351.
C ontents Quick Install Installing the LavaP ort-650 Hardware Windows Installation · Changing I/O Resources - Com & IRQ · Setting LavaP ort Data R ates · Lava Modem Speed Set - f or 230.4 kbps · Setting LavaP ort FIFO Control · Flow C ontrol Windows NT 4.
Quick Install Windo ws 95/98/ME/2000/XP 1. With the power off , insert the LavaP ort-650 PCI card into any free PCI slot. 2. Launch Windows - new hardware will be detected . 3. When prompted , inser t the LavaP ort-650 installation diskette point Windows to look at the floppy's root directory .
Hardwar e Installation 4 1. Before opening the casing of y our computer , make sure that all power is off . 2. Locate an unused PCI slot and insert the LavaP ort-650 into it. Ensure that it is well seated . 3. Screw the metal backplane of the LavaP ort-650 board to your PC’ s casing and replace the machine ’ s c over .
Windo ws Driver Installa tion 1. Once the Lav aPort-650 is installed in your PC, start your computer . Windows will automatically detect the Lav aPort-650 as a new PCI Serial Controller and ask you t o inser t the LavaP ort Installation diskette. The installation files are located in the root directory of this disk.
6 3. Click on the Start button, then choose S ettings, Control Panel, System, Device Manager . Y ou should see a window that is similar to the following:.
4. Click on Ports and select the Com port listed under the heading LavaP or t 650 PCI. 5. Click Properties. The following screen will appear: 7.
8 Because the LavaP or t 650 is a PCI device, Windows will alwa ys allocate non-standard I/O resources t o this por t (e.g . Assigning it as Com 5, even though any one of Com1-4 ma y be free).
9 1. Y ou may physically modify the I/O Range and IRQ used by the LavaP or t 650 by de-selecting the “Use Automatic Settings” check box, and double-click ing the appropriate heading , or : 2a. F or Windo ws95/98/ME, you may use the La va P or t Redirect Utility provided in the Utils subdirectory of your Lav aPort diskette.
10 Setting Lav aP or t Data Rates in Window s.
11 The data rate of the La vaP or t may be set using the Bits per Second pull down menu. Please note that this menu will also appear when setting the “Port Properties” in any c ommunications application, and may have to be set independently of your Contr ol Panel settings.
The Lav aPort-650 suppor ts data rates up to 460.8 kbps, including 115.2 kbps and 230.4 k bps. However , not all modems suppor t Com P or t rates above 115.
13.
14 Setting Lav aP or t FIFO C ontrol in Windo ws.
The Lav aPort-650 uses a 16650 U ART incorporating a 32-byte FIFO (first- in first-out) buffer . The FIFO control tabs set the buff er “trigger ” levels.
Flow C ontrol refers to the type of signaling that is used between the modem and the LavaP or t. If you are connecting the Lav aPort to a modem or ISDN terminal adapter , use the default setting of Hardware (RTS/CTS) flow control. Software Flow Contr ol (Xon/Xoff ) is used only for connecting the LavaP or t to a non-modem serial device (e.
17 Windo ws NT 4.0 Installation Windo ws NT Driver Installa tion 1. Once the Lav aPort-650 is installed in your PC, turn your computer on and start NT . 2. Place the Lav aPort installation diskette into your floppy drive and select Run from the Star t Menu.
18 Please note that Com 1 ma y not appear in this applet if you have y our mouse attached to Com 1. The Lav aPort-650 suppor ts data rates up to 460.8 kbps, including 115.2 kbps and 230.4 k bps. However , not all modems suppor t Com P or t rates above 115.
19 This page intentionally blank.
La va C omputer MFG Inc. La v a T echnical Suppor t 9:00 am to 5:30 pm Monday t o Frida y (Eastern Time) T el: +416 674-5942 F ax: + 416 674-8262 E-mail: tech@lav alink.com Internet: www .lavalink.c om This device complies with part 15 of the FCC Rules.
デバイスLava Computer 650の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Lava Computer 650をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLava Computer 650の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lava Computer 650の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lava Computer 650で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lava Computer 650を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLava Computer 650の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lava Computer 650に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLava Computer 650デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。