LencoメーカーMDV-6の使用説明書/サービス説明書
ページ先へ移動 of 23
MDV -6 Home Cinema Set FOREWORD.
-2- THANKS Thank you for purchasing this product! Y our choice of the produc t sufficiently di splays your expertise in acoustic equipment. We are honored to provide you with more satisfactory products.
-3- FOREWORD…………………………………………………………………………………….2 CONTENT………………………………………………………………………………………..3 W ARNING……..…………………………………………………………………………….
-4- 1. REMOTE CONTROL SENSOR 2. POWER ON/OFF BUTTON 3. STOP BUTT ON 4. DISC DOOR 5. EJECT BUTT ON 6. AUDIO BUTTON 、 MONO/STEREO BUTTON 7. PLA Y/ENTER BUTTON 8.. DISPLA Y SCREEN 9. F AST REWIND/F AST FOR W ARD (TUNE-/+) BUTTON 10. VOLUME+/- 1 1. PREVIOUS/NEXT(CH-/+) BUTT ON 12.
-5- BACK P ANEL 1. FM ANTENNA INTERF ACE 2. COAXIAL OUTPUT 3. SCART OUTPUT 4. POWER SUPPL Y INPUT 5. S-VIDEO O UTPUT 6. OPTICAL FIBER OUTPUT 7. L/R AUDIO INPUT 8. L/R SPEAKER OUTPUT 9. SUBWOOFER OUTPUT 10. VIDEO OUTPUT 11. Pb/Cb, Y , Pr/ Cr COMPONENT OUTPUT 12.
-6- REMOTE CONTROL NOTE: 1. Place the batteries in the r emote control and turn on the player , put the emitter against the sensor of player for remote control. 2. The distance of remote control should not e x ceed 7 meters, or else, it will be invalid.
-7- CONNECTION WITH TV 1. If you TV has A V terminal, co nnect this unit to TV with A/V cables, and set TV to be A V status after confirming the connection is correct. (Figure 1) 2. If your TV has S-Video terminal, please use t he S-Video connection cable t o connect the playe r and TV , to obtain a higher quality image.
-8- CONNECTION WITH AMPLIFIER Setup of Digit al Audio Output Connect the optical or coaxial output jack to t he amplifier . While in of play or stop mode, press the setup button on the remote control .
-9- SYSTEM CONNECTION Please refer to the following figure to connec t your acoustic equipment ! T o keep all the connection correctly and firmly! Power supply can be conn ected finally .
-10- BASIC OPERA TION PREP ARA TIVE 1). Before turning on, check whether all the c onnectio n are correct and reliable. Plug the po wer plug into the corresponding power socket.
-1 1- BASIC OPERA TION TIME SELECTION In play mode, press T/F button on the remote control, the TV screen displays, VCD Display: VCD TRK 01/XX P B C 00:00:00 VCD Disp lay: DVD TT 01/XX CH 007/XXX 00:0.
-12- BASIC OPERA TION SHORTCUT When play DVD discs, press the Shortcut bu tton to jump over the initial title, menu or warnings. (Only for some discs, subject to the quality or recorded status of the played discs) SOUND FIELD In play status, press S.Field button, you can select dif ferent sound field effect.
-13- BASIC OPERA TION NUMBER BUTTONS 1). While playing songs, press the numeric buttons to directly select the songs you need. 2). If the desired track number is # 10 or abo ve, you can select it by pressing the 10+ button once, and then pressing a num eric button (1--10).
-14- BASIC OPERA TION SLOW In play status, every time the Slow button is pressed, the speed of the disc will play in 1/2,1/3, 1/4,1/5,1/6,1/7. MP3 DISC PLA YING FUNCTION 1). Press the Eject button on the panel or remote control to open the deck, put in an MP 3 disc, then press the Eject button to close the deck.
-15- BASIC OPERA TION MPEG4 、 JPEG PICTURE DISC PLA YING FUNCTION 1). Place the MPEG4/JPEG disc into the deck, this unit will begin to read, the main directory will be displa yed on the TV screen. Di rectory A rea Pl ay F il e Se lec ti on Are a 2).
-16- BASIC OPERA TION FM RADIO OPERA TION 1. Enter FM Function In the turn-on or play status, press the FM button on the remote control, enter FM status. 2. Select Bands 1) directly input fr equency: press the T/F button on the remote contro l, input the frequency that you want directly .
-17- DVD Menu Setting Press the Setup button on the remote control to open the me nu setup function, the TV screen will display the following figures. 1. SYSTEM SETUP P AGE 1). TV System Perform adjustment according to different disc applicable for dif f erent TV systems, includes four options: NTSC, P AL, P AL60, AUTO.
-18- DVD Menu Setting 5). Password and Rating The password is used to prevent t he children watching unproper discs. (1) Input a four-digit password. (The initial p assword of this unit is 0000.) (2) Move the cursor to rating option, press Play/Enter button to select the desired rating.
-19- DVD Menu Setting 3.AUDIO SETUP P AGE 1). Audio Out Each DVD disc has various audio output types for selectio n. Y ou can set the type according to the acoustic system type you ar e using.
-20- DVD Menu Setting 4.VIDEO SETUP P AGE 1). Brightness This option is used to change the brightness of the screen, press the up/down direction button to adjust the brightness, pres s left direction button to exit.
-21- DVD Menu Setting 5. DIGIT AL SETUP P AGE 1). OP Mode (1) Line Output : to compress the input signal linearly , lower in volume and applicable t o night.
-22- SPECIFICA TION Disc T ype DVD MP3 CD PLA YBACK Video Format MPEG 2 for DVD, MPEG 1 for VCD Audio Format MPEG 1, MPEG 2, PCM, STEREO Signal Output Video system: NTSC, P AL, P AL60, AUTO Video output 1.
-23- TROUBLESHOOTING Please use the following methods to solve t he following problems while using this unit. Fault Phenomenon Possible Cause Handing Power supply can not be turned on Power plug is no.
デバイスLenco MDV-6の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Lenco MDV-6をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLenco MDV-6の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lenco MDV-6の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lenco MDV-6で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lenco MDV-6を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLenco MDV-6の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lenco MDV-6に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLenco MDV-6デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。