Lenoxx ElectronicsメーカーCD-162の使用説明書/サービス説明書
ページ先へ移動 of 26
® COMP ACT DISC PLA YER AM/FM DUAL CASSETTE RECORDER WITH REMOTE CONTROL MODEL CD-162 INCLUDES FULL FEA TURE REMOTE CONTROL MUL TI-COLORED FLUORESCENT DISPLA Y PLA YS ALL MUSIC COMP ACT DISCS KARAOKE FUNCTION WITH DUAL MIC.
SAFETY INSTRUCTIONS The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
EXAMPLE OF ANTENNA GROUNDING AS PER NEC - NA TIONAL ELECTRICAL CODE It is the intent of Lenoxx that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever copying tapes or CDs.
1 . Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2 . Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES Y ou can use AC power or batteries as a power source. TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plugs are polarized and only fit one way into the wall outlet and back of the set.
A TT ACHING THE SPEAKERS 1.Bring one of the speaker to the right side of the set. 2 . Align the rails of the speaker box with the main set as shown in FIG.1. 3 . When speaker align with the rails, push the speaker into the rails as shown in FIG. 2. 4 .
REMOTE CONTROL Y ou can control the CD PLA YER with the provided REMOTE CONTROL (including the functions of POWER ON/OFF , MUTE, VOLUME control, CD REPEAT and PLA Y features). Slide the battery cover to remove. Insert two size AAA batteries correctly so that the + and - polarities match the polarity diagrams inside the battery compartment.
PLA YIN G A CD 1 Press the POWER switch, the POWER/BA TT . lamp and the VFD display will turn on. 13 Open the CD DOOR by pressing the right corner marked OPEN/CLOSE and place the CD in the CD compartment. The label side of the CD should face upward. 2 5 Connect the supplied AC power cord or batteries (see page 4).
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback will flash during pause. Press again to resume play after pause. Go to the next track Go back to the previous track Locate a point in a song or Press and hold down while playing until you find the point.
REPEA T PLA Y PLA YING CD SONGS (TRACKS) OVER AND OVER T o repeat Press a single track (song) Press the REPEA T button once all the tracks (all songs) Y ou can play CD tracks over and over in normal or program play modes (see page 10).
10 Y ou can make a program of up to 19 tracks to play in the order you want them to be played. PROGRAM PROGRAMMED CD PLA Y SELECTING YOUR OWN MUSIC PLA YING ORDER NOTE : Programming is only done during stop mode. 1 2 3 4 5 During STOP mode, press the PROGRAM button.
LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (see page 4). Set the FUNCTION switch to RADIO position. 1 2 3 1 2 3 Set the BAND switch to the proper band position (AM or FM), and set the FM MODE switch to STEREO or MONO. Tune into the station you prefer using the TUNING control.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Press or Set Adjust the volume VOLUME control (+ or - ). TIP • If the FM broadcast is noisy , set the FM MODE switch from STEREO to MONO. Turn off the Radio Set the FUNCTION switch to T APE position or press the POWER switch.
PLA YING A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button (DECK A or DECK B) to open the tape compartment and insert a recorded tape. Close the door. 4 2 2 3 Press the PLA Y button. The player turns on and starts playing.
RELA Y PLA Y 3 2 4 Press the cassette P AUSE button on DECK B. 3 1 Press the cassette PLA Y button on DECK A, DECK A will play . 5 Connect the supplied AC power cord or batteries (see page 4). T o play tapes in DECK A and then DECK B, follow the steps below: Press the cassette PLA Y button on DECK B.
USE THESE BUTTONS FOR ADDITIONAL CASSETTE T APE OPERA TIONS To Stop playback Eject the cassette Press or Adjust Adjust the volume Press the VOLUME button ( + or -) Fast forward or rewind the tape F AST FORW ARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause.
RECORDING ON A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button (DECK B) to open the tape compartment and insert a blank tape.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the power Press the STOP/EJECT button and press the POWER switch, the POWER/BA TT . lamp will go off. TIP Press or Set Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording.
SINGING ALONG WITH KARAOKE FUNCTION MIC 1 MIC 2 Connect the supplied AC power cord or batteries (see page 4). 1 2 3 4 Insert microphone plugs into the microphone jacks.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Adjust the RIGHT & LEFT channel output. Press or Adjust Adjust the MIC volume MIC VOLUME VOLUME control VOLUME CONTROL 19 Adjust the sound effects for low thigh tones.
PRECAUTIONS On Safety As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only . Should any solid object or liquid fall into the set, unplug the player, and have it checked by qualified personnel b e f o r e operating it any further.
PRECAUTIONS (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens becomes dirty , it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower .
TROUBLE SHOOTING Problem Remedy The power is not on. Connect the AC power cord to a wall outlet securely. Make sure the batteries are inserted correctly and they are fresh. There is no sound. Make sure the FUNCTION switch is at the right position as you want.
SPECIFICA TION General Description Power source: AC 120V , 60Hz 22Watts DC 8 size D batteries for set DC 2 size AAA batteries for Remote Control (Alkaline batteries are recommended) Speakers (2 ways): an d 2 - 5 ^ 4 ohm woofers 2 - 3 ^ 4 ohm tweeters with crossover Output power: 5.
© 2001 LENOXX ELECTRONICS CORP . 2 GERMAK DRIVE CARTERET , N.J. 07008 MADE & PRINTED IN CHINA For customer service Dial 1-800-315-5885 (MONDAY - THURSDA Y 9:00 AM - 5:00 PM, FRIDA Y 9:00 AM - 1:00 PM EST) or Visit Our Website : http://www .lenoxx.
デバイスLenoxx Electronics CD-162の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Lenoxx Electronics CD-162をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLenoxx Electronics CD-162の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lenoxx Electronics CD-162の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lenoxx Electronics CD-162で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lenoxx Electronics CD-162を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLenoxx Electronics CD-162の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lenoxx Electronics CD-162に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLenoxx Electronics CD-162デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
