LevelOneメーカー4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bの使用説明書/サービス説明書
ページ先へ移動 of 135
LevelOne GNS-8000B 4-bay Sata NA S w/2 Gigabit Ethernet User`s Manual V er 1.00-0512.
- 2 - CUSTOMER SER VICE T o obtain service or technical support for your system, please refer to the registration card for detailed contacts. Trademarks GNS-8000B and LevelOne® are tra demarks of Digital Data Communications Asia Co. , Ltd. Microsoft®, Windows® and Internet Expl orer® are registered trademarks of Microsoft Inc.
- 3 - Table of Contents Chapter 1 Overview of GNS-8000B ....................................................... 6 1.1 Introduction................................................................................... 6 1.2 Pa ckage Contents .............
- 4 - 6.6 Disk Config urati on ......................................................... 54 6.6.1 Create Disk Volu me ................................................................. 54 6.6.2 Delete Disk Volu me ......................................
- 5 - 7.2 By Apple MAC OS ......................................................................... 94 7.3 By Linux OS ............................................................................... 100 7.4 By W eb Br owser ...........................
- 6 - Chapter 1 Overview of GNS-8000B 1.1 Introduction Thank you for choosing LevelOne GNS- 8000B , 4-bay Sata NAS Server . This product has the foll owing key features: • Simple installation, 5 mi nutes configurati on and user-friendl y management interface for SMB users.
- 7 - 1.3 System Overview Front View Rear View Power Rear View LED indicators: Po wer , Error , Network and Disk LCD panel Down button Enter button Power co nnector A TX Redund ant P ower Supply USB p.
- 8 - Chapter 2 Install GNS-8000B 2.1 Install Hard Disk T o install hard disks to GNS-8000B , plea se make sure you ha ve the following items in place.
- 9 - Hard Disk Installati on Procedure It is highly recommended that you inst all disks of the same brand and same size on GNS-8000B . The server may function improperly if disks of different brands a nd size are inst all ed. Please refer to Chapter 2.
- 10 - 3. Place a hard disk in a hard disk tr ay . 4. T urn over the disk tr ay . Make sure the disk holes match the holes at the base of the tra y . F asten the disk wi th four flat head screws . 5. Insert the hard disk tra y to GNS-8000B. Then lock the tray with the hard disk lock.
- 11 - Install Rackmount Kit Please follow the steps below to in stall the rackmount kit of GNS-800 0B. 1. Attach brack ets ( a ) to both sides of GNS-8000 B in the front. 2. Lock the brack ets ( b ) to GNS-8000B. Then a ttach and fasten z -shape brack ets ( c ).
- 12 - 2.2 Hard Disk Recommendation List The following HDD models are verified by LEVELONE that are compatible with GNS-8000B. It is recommended to use the same brand and same si ze listed here for GNS-8000B if more than one hard di sk is installed. Other HDD br ands that are not tested by LEVELONE may or may not work properly with GNS-8000B .
- 13 - 2.3 Connect GNS-8000B to Office Network When connecting GNS-8000B to office network: 1. It is recommended to install GNS-8000B in LAN with DHCP server . 2. Y ou can use any PC in the same subnet to connect to the server by IE browser . 3. Y ou ma y also connect a CD/DVD burner to GNS-8000B for data backup and restore.
- 14 - T o install GNS-8000B in office ne twork, please follow the steps: a, b, c, d, e below . # T o use fail ov er or load balance func tion, please connect both LAN 1 and LAN 2 to switch/ h ub/ router . For furt her details, please refer to Chapter 6.
- 15 - DISK NUMBER: 4 SIZE: 457884 MB SYS TEMP: 25 o C SYS FAN: 5400 RPM CPU TEMP: 28 o C CPU FAN: 3000 RPM Chapter 3 Use LCD Panel When GNS-8000B is turned on, the server na me, IP address, date, and time will be shown. Check System Information 1.
- 16 - NAS001122 1.0.0 (1118) NAS001122 1.0.0 (1118) PRESS 2 SECONDS FOR CONFIG. PAGE 4. Press Down button again to view model number and version information. System Setting Function 1. Press Enter button for two seco nds to enter config uration page.
- 17 - Network Settings Enter NETWORK SET TINGS configuration page and press Down button to select one of the follow ing options. • DHCP DHCP will obtain IP address automatically . • ST A TIC IP Press Enter button to se lect ST A TIC IP . Then configure the IP address.
- 18 - SELECT: 2. POWER DOWN SELECT: 3. REBOOT SYSTEM POWER DOWN Press Down button to se lect POWER DOWN and pre ss Ente r button to confirm shutting down GNS-8000B . REBOOT SYSTEM Press Down button to select REBOO T SY STEM and press Enter button to confirm restarting the system.
- 19 - Chapter 4 Quick Install Wizard Quick Install Wizard enables you to search f or all available GNS-8000B within the local network, and view the server name , IP ad dress, and workgroup etc. Y ou can also configure the disk name, date an d time, etc.
- 20 - Run Quick Install wiz ard shortcut on the desktop, the follow ing screen will be shown. Name of server IP address of server Windows workgroup j oined by server View the details of selected serv.
- 21 - Operation 1. Configure GNS-8000B Select a GNS-8000B displayed on Quick Install Wizard and click Con figure . Enter the administr ator password. Upon successful login, the following screen will appear . Enter the configuration values and click OK.
- 22 - For fur ther configur ation of the sys tem, please login the admini stration page of GNS-8000B via web browser . Note: Y ou may ha ve to restart GNS-8000B after cha nging the network configur ation. Set the name, date and time for GNS-8000B. The length cannot exceed 14 char acters.
- 23 - 2. View GNS-8000B details Select a GNS-8000B av ailable on Quick Install Wizard and click Details . The following screen w ill be shown:.
- 24 - . 3. Search for all av ailable GNS-8000B again. T o refresh the search results, click Refresh to display all available servers within the network.
- 25 - 4. Help If you have any enquiries about Quick Install Wiz ard when using the program, you can click the Help button to view the help text . 5. Enter the homepage of GNS-8000B Double click on GNS-80 00B to enter the administr ation page.
- 26 - Chapter 5 Start to Enjoy the Services of GNS- 8000B GNS-8000B provides the following powe rful se rvices and applications 5.1 File Server Y ou can mak e use of the following means to access and share the folders of GNS - 8000B easily: a.
- 27 - 5.3 Backup Server GNS-8000B provides versatile backup mechan isms to help you back up or restore disk data completely to enhance more e fficient and secure system management. The backup/ restore applicat ions are listed below: a. Remote Replication Re mote replication is a built -in backup feature of GNS-8000B .
- 28 - Chapter 6 Administer GNS-8000B When you have installed GNS-8000B and co nnected it to the network or PC, you can manage the server via web bro wser .
- 29 - 6.1 Access Administration Page Y ou can access GNS-8000B administr ation page by the following means: 3. Launch the web browser . Enter the IP address of GNS-800 0B to access the administration page. Y ou can check th e IP address of GNS-8000B on the LCD panel (see Chapter 3).
- 30 - 5. When the administration page is shown, click Admi nistration . 6. Enter the user name and pas sword to login. Default user name: administr ator Password : admin The first time you login GNS-8000B, Quick Con figuration page will be shown. Please refer to 6.
- 31 - 6.2 Server Administration There are eight main sections in server administr ation: Qui c k Conf igur ati on Net w or k S h ar e Ma na ge m e nt System Tool s Sta ti sti cs & Lo gs Di sk C o.
- 32 - 6.3 Quick Configuration Please follow the step-by-step guide in Quick Configuration to complete the settings of GNS-8000B. If you have any questions during we b administration, please click the help button on the top right hand corner of the page.
- 33 - Step 2. Change the administr ator password or select to use the original password. Step 3. Enter the date, time and select the time z one for the server . Step 4. Select the language the server us es to display files and directories. The default setting is English .
- 34 - Step 5. Enter the IP address, subnet ma sk and default gatew ay for the server . Select network interf ace configuration: fail over or load balance.
- 35 - Step 7. Configure disk volume on the server . Step 8. Configure the method of user au thenti cation. Please refer to Chap ter 6.5.2 for further information.
- 36 - Step 9. Manage users and us er groups of this server ..
- 37 - Step 10. Manage network shares on this server . Step 11. Finish. It may take sever al to tens of minutes to complete Quick Configurati on, dependin g on your system setti ngs.
- 38 - 6.4 System Settings Basic system settings include the server name, date, time, and view system settings. 6.4.1 Server Name Enter the name of GNS-8000B . The server name can be 14 char acters long at maximum, which can contai n alphabets, numbers and hyphen (-).
- 39 - 6.4.2 Date & Time Set the date, time, and time zone accordin g to your l ocation. If the setti ngs are incorrect, the follow ing problems may occur: When using a web bro wser to access or sa ve a file, the display time of th e action will be incorrect .
- 40 - NTP Server Y ou can enable or use specified NTP (Network Time Protocol) server to update the date and time of t he system automatically . T o enable NTP server , please enable Configure NTP server or cli ent setting and enter the IP address or domain name of the NTP server , e.
- 41 - 6.4.3 Language Setting Select the language GNS-8000B uses to display files and directories. Note: All files and directories on GNS-8000B will be created using Unicode encoding.
- 42 - 6.5 Network Settings 6.5.1 TCP/ IP Configuration.
- 43 - Configuration of Network Inter faces Fail Over (Default) The system supports the conf iguration of multiple network interf aces, which enables you to perform F ail Over or L oad Balance functions. F ail over ensures server av ailab ility to the network.
- 44 - Load Balance In load balance * mode, the transmission lo ad is distributed among aggregated network ports. * An intelligent software adaptiv e agent will repeatedly analyze the traffic f low from the server and distribute the packets based on the desti nation address.
- 45 - Standalone Standalone settings enable each port to have a unique IP , which allows users on different network areas to shar e one GNS-8000B and maintain their independence from one an other in the network. When using this mode, fail over cannot be used and only LAN 1 can be configured as DHCP serv er .
- 46 - Network Speed Network speed settings pro vide an adv anced option for configuring ne twork speed. Y ou can select auto-negotiation (default), 10 Mbps, 100 Mbps, or 1000 Mbps. It is recommended to use t he default setting th at the server will determin e network speed automatically .
- 47 - Primary DNS Server: Enter the IP address of primary DNS server that provides DNS service for GNS-8000B in exte rnal network. Secondary DNS Server: Enter the IP address of seco ndary DNS server that provides DNS service for GNS- 8000B in external network.
- 48 - 6.5.2 Microsoft Networking Enable file service for Microsoft networki ng: If you ar e using Microsoft Windows, enable this service to access the files on network share folders. Assign a workgroup name. Standalone Serve r Use local users for user authentication.
- 49 - Microsoft Network Services. W orkgroup: Specify the workgroup GNS-8000B belongs to. The workgroup is a computer group unit in Microsoft Windows network for network sharing. AD Server Name: Enter the name of the AD server when AD domain is selected for authentication.
- 50 - 6.5.3 Apple Network T o use GNS-8000B on Apple MAC oper ating system, enable Apple T alk network support. If your Apple T alk network uses exte nded networks, and is assigned w ith multiple zones, assign a zone name to GNS-8000B . If you do not w ant to assign a network zone, enter a n asterisk (*) to use the defaul t setting.
- 51 - 6.5.5 Web File Manager T o access files on GNS-8000B via web browser , enable We b File Manager . If GNS- 8000B is connected to the Internet and us es a valid IP address, you can access files on the server by web browser from anywhere. F or further details, please refer to Appendix A.
- 52 - 6.5.7 View Network Settings Y ou can view current network settings and st atus in this section..
- 53 -.
- 54 - 6.6 Disk Configuration In the section, you can create, delet e, examine and format disk volume, as w ell as view disk and volu me status of GNS-8000B.
- 55 - b. RAID 5 Disk Volume Three or more hard disks can be integr ated to form RAID 5 disk volume. Data will be distributed and stored among th e disks. If a disk fails, you can replace a new disk with the damaged on e, and the system will resto re the data to the new disk.
- 56 - e. Linear Disk Volume You can combine two or more disks into one larger disk. Files will be saved on physical disks sequent ially but does not have a disk failure f ile protection function. The overall c apacity of linear disk is the su m of all disks.
- 57 - 6.6.3 Examine Disk Volume To examine a disk volume, select the disk volume to examine an d click OK. You can check the Fix erro rs box and the server will fix errors automatically duri ng disk checking.
- 58 - 6.6.4 Format Disk Volum e To format disk volume, select the di sk volume to format and click OK. 6.6.5 View Disk & Volume Status You can view details of physical disk s and logical volumes in the section.
- 59 - 6.7 User Management The files on GNS-8000B can be shared among multiple users. F or easier management and better control of users’ ac cess right, yo u have to organize users, user groups and their access right control.
- 60 - 512 users can be cre ated at maximum (i ncluding system defaul t users). You can create a new user according to your n eeds. The follo wing informat ion is required to create a new user: User name The user name must not exceed 32 char acters.
- 61 - 6.7.2 User Groups User group is a collection of users with th e sa me access right to files or folders. GNS-8000B has created the following user gro u ps by default: Administrators All members in this grou p have administration right. You cannot delete this group.
- 62 - Create Users and Ass ign Users to User Group The following example demonstrates how to create new users and assign users to a user group. ABC Co. has recently r ecrui ted two employees Mr. Jones Lee for Adm inistration Department and Ms. Jane Wu for Sale s Department.
- 63 - iii. Select t he user groups the users belong to on the ri ght list, i.e. Mr. Jones Lee for Administration Dept and Ms. Ja ne Wu for Sales Dept, and click Add . Then click Close . iv. After creatin g the users, the users will appear on th e list on Create User Page.
- 64 - Create Private Network Share for Us er Groups You can create particular network share for each user gro up. The procedure is described as below: 1. To create a network share called media acce ssible by Administration Department only, please go to “Use r Management—User Groups” page.
- 65 - 3. You can see the folder media in Network Share M anagement page. 4. Enter Access Control. You ca n see that only Administrati on Dept has full access right to the folder.
- 66 - 6.7.3 Quota T o allocate disk volume ef ficiently , you can specify the quo ta that can be used by each user . When this function i s enabled and a user has re ached his/her disk quota, he/she cannot upl oad data to the server an ymore. By default, no limitations are set for users.
- 67 - 2. Select Jones Lee on User page and click Quota Settin gs on the right. 3. Enter the quota size 2000MB and click OK . 4. Follow the same steps and enter the quota size 4000MB for Jane Wu and click OK . The quota setting is successfully applied.
- 68 - 6.8 Network Share Man agement The primary purpose of network storage is file sharing. In a standard operation environment, you can c reate different ne twork share folders for various types of files, or provide different file access rights to users or user groups.
- 69 - 6.8.1 Create T o create a network share, ent er the following informat ion: Network share name The share name must not exceed 12 characters and canno t contain the following characters: " . + = / : | * ? < > ; [ ] % Disk volume This area shows the disk volume statu s.
- 70 - 6.8.2 Property To edit the property of an existing network share, select a share and click Property . You can the n edit th e content of that share.
- 71 - 6.8.4 Delete Select a share and click delete. Clic k OK to confirm..
- 72 - 6.9 System Tools System T ools enable you to optimiz e the maintenance and management of GNS- 8000B. 6.9.1 SNMP Settings Enable SNMP (Simple Netw ork Management Protocol) service and complete al l necessary settings to manage network components of the server by SNMP.
- 73 - 6.9.2 Alert Notification Enter the e-mail address of admi nistrator an d SMTP server IP address. In case of warning or malfunction, e. g. CPU fan fails, a disk drive fails or is un plugged, an email will be sent to the ad ministra tor automatically .
- 74 - 6.9.4 Hardware Settings Y ou can enable or disable the hardw are functions of GNS-8000B. i. Enable LCD panel setting function To enable users to configure TC P/IP setting s via the LCD p anel.
- 75 - 6.9.5 UPS If your UPS device provides USB i nterface, you can enable UPS (uninterruptible power supply) support to protect your sy stem from abnormal system shutdown caused by pow er outage. In case of ut ility power failure, th e system will shut down automatically by probing the power stat us of the connected UPS unit.
- 76 - UPS Model Select the UPS model from th e list. If the UPS model you are using is not available on the list, please contact our technical support. IP Address of UP S If you have selected APC UPS with SNMP for UPS model, enter the IP address of the UPS.
- 77 - 6.9.6 System Update Note: If the system is runni ng properly , you do not need to update the firmware. Before updating system firmware, plea se make sure the product mod el and firmware version are correct.
- 78 - GNS-8000B firmware.
- 79 - 6.9.7 Change Logo You can choose a personal picture to di splay on the login page of GNS-8000B. The size of the picture cannot exceed 20K byte s.
- 80 - 6.9.8 Tape Backup T ape backup enables you to perform backup or restor ation jobs by a tape drive. GNS-8000B supports full backup and incremental backup . By full backup, all source files will be backed up. By incremental backup, only modified or new files after last backup will be backed up.
- 81 - Scheduled Jobs Y ou can schedule a backup job to be executed automatically . Click New and define the job name, backup sour ce, backup t ype, and schedule.
- 82 - T ools There are several useful tape function s to oper ate on the tape drive. For example, you can rewind, eject or er ase the tape here. Click Apply to execute the action. Job Status Y ou can view the status of backup or restore job. Note: 1.
- 83 - 6.9.9 Remote Replication Remote R eplicat ion enables you to replicate local files to remote f olders on another server . The files will be compressed before the repl ication process in order to save ti me for data transfer . Make sure a ne twork sh are is crea ted before creating a remote repli cation job.
- 84 - i. New a. Click New to enter the following page. b. Complet e all settings and click OK to save or Cancel to quit. Note: T o use remote replication, enable Microsoft Networking service, make sure the destination networ k share and directory have been created, and the user name and password are valid to login the destination folder .
- 85 - ii. Edit a. Select the job to be edited. b. Click Edit . c. Modify the settings. d. Click OK to save or Cancel to quit. iii. Delete a. Select the job to be deleted.
- 86 - 6.9.10 Backup/ Restore/ Reset Settings To backup the setting(s), select the appropriate option(s) and click Backup . To restore a backup settings file, click Browse to select the file and click Restor e . To reset the setting(s) to factory defaul t(s), select the appropriate option and click Reset .
- 87 - 6.9.11 USB CD/ DVD Backup/ Restore USB Backup/R estore function enables you to back up local data to CD/DV D discs via USB CD/DVD burner , and CD/DVD data to l ocal disk.
- 88 - i. USB CD/ DVD De tection a. Connect USB burner to GNS-8000B . T urn on the burner and input a writable disc. b. Click Re-detect . The system will display information of the detect ed burner . c. Click Eject Disc to eject the disc from the burner .
- 89 - ii. Write data a. T o write data from GNS-8000B to disc, enter the volume label name. b. In Source Path (Network Share/Di rectory), select a network share from the drop-down menu and enter a di rectory name. Y ou can also use s troke to indicate multiple dir ectories, e.
- 90 - iii. Load data a. Insert the disc for loading data to GNS-8000B network share. The volume label is shown in CD Label. b. In Destination Pa th (Network Share /Directory), select a network share from the drop-down menu a nd enter a directory name.
- 91 - 6.10 Statistics & Logs Y ou can view the event logs of all currently online users on GNS-8000 B for system monitoring. 6.10.1 Active Users This page shows all users t hat are curre ntly logged on to W eb File Manager . 6.10.2 Event Logs GNS-8000B can store thousands of recent event logs, including warning, error and information messages.
- 92 - Chapter 7 Access GNS-8000B 7.1 By Microsoft Windows 1. Y ou can access GNS-80 00B in Wi ndows OS by the following w ays: a. By Quick Install Wizard . For fu rther information, please refer to Chapter 4. b. Y ou may also search for GNS-8000B within the Network Neighborhood.
- 93 - 2. Once the connection to GNS-8000B is su ccessful, all listing on your av ailable network share will be displayed. Use the option Map Network Drive to map the folder(s) as your netw ork drive.
- 94 - 7.2 By Apple MAC OS If you are an Apple MAC user , you can access GNS-8000B by the following ways: 1. Using Network Brow ser a. Choose “Network Browser” in Apple menu. b. In “Network Browser” , choose Appl e T alk. A list of computers on the Apple T alk netw ork will appear .
- 95 - c. Enter the lo gin name and password, or use “Guest” to enter . Click Connect . d. When GNS-8000B is connected, all network shares will be shown.
- 96 - e. C hoose a network share to connect. The network share will appear on the desktop..
- 97 - 2. Using Chooser a. Select Chooser on Apple menu b ar . b. Click on AppleShare . The name of GNS-8000B will appea r on the right side of the window .
- 98 - c. Use the mouse to highlight GNS-8000B and cl ick OK. d. Enter the correct login name and pa ssword or use “Guest” to login, and then click Connect .
- 99 - e. All available network shares will be listed. Sele ct a network share and click OK. f. Close the Chooser program. Do uble click on the icon on the desktop to access the files.
- 100 - 7.3 By Linux OS In addition to Microsoft and MAC O S, GNS-8000B also supports Linux systems through the NFS service: 1. On Linux, run the following command: mount -t nfs <GNS-8000B IP ad dress>:/<Networ k Share Name> <Directory to Mount> For example, if the IP address of your GNS-8 000B is 192.
- 101 - 7.5 By File Transf er Protocol (FTP) In addition to working with multiple operating systems, GNS-8000B al so supports connection via FTP . Enter the correct us er name and pas sword to connect the server or access the public share folders as guest.
- 102 - b. Click t he share folder in FTP section. c. When the ftp folder is shown, enter user name and password..
- 103 - d. The share folder will be shown. Y ou can then manage the folder by dragging and dropping file s to it, as well as rename or dele te the files.
- 104 - Chapter 8 GNS-8000B Maintenance GNS-8000B is specially designed to run 24x7 and be ready at all times against system crash ca used by power outage. Th is section provides a general overview on system maintenance. 8.1 Restart/ Shut down Server Follow the steps below to restart or shut down GNS-8000B .
- 105 - 8.2 Reset Administrator Password and Network Settings T o reset the administrator password and network settings o f GNS-8000B, 1. Press the reset button of GNS-8000B for a few seconds.
- 106 - 8.3 Disk Failure or Ma lfunction When you encounter disk malfunction or failure, please do the following: 1. Re cord the malfunction status or e rror messages. 2. Stop using the failed GNS- 8000B and turn off the server . 3. Contact customer service fo r technical suppo rt.
- 107 - Appendix A Web File Manager Using Web File Manager T o use W eb File Manager , enable W eb File Manager in Network Settings first. Launch the web browser and go to GNS-8000B home page. Select Web File Manager and enter the correct login name a nd password.
- 108 - Select an existing network share for management. Y ou can organize network share folders of GNS -8000B. With W eb File Manager , you can upload, rename, or delete files an d folders in the network shares. View files online Click on a file displayed on the web page.
- 109 - Rename file o r fold er i. Select a file or folder to rename. ii. Click (Rename) on the toolbar . iii. Enter the new file or folder name and click OK. Delete file or folder i. Select a file or folder to delete. ii. Click (Delete) on the toolbar .
- 110 - Viewing Files Named in Chinese T o view files named in Chin ese, you may have to configure the browser settings. T ake Internet Explorer as an example, follow the steps below to conf igure the settings. 1. Click on Tools in IE browser . 5. Restart the browser .
- 111 - Web File Manager Icons Icon Description Up-return to the parent folder Refresh-reload the current page Home-return to network share list home page Create folder Re name file or folder Delete f.
- 112 - Appendix B Configuring AD Authentication AD environment mixed mode can be su pported b y GNS-8000B. F or example, qatest.com.tw and sub2.qatest.com.tw ar e domains controlled by Windows 2003 server , and sub1.qatest.com.tw domain is controlled by Windows 2000 server .
- 113 - Please make sure you have enabled the Active Directory Service on the Windows Server and check the following items: 1. DNS Server setting on GNS-8000B ha s to be di rected to AD server . 2. GNS-8000B and AD server can synchron ize only if their time difference is less than 5 minutes.
- 114 - Adding GNS-8000B to Wind ows Server 2003 Acti ve Directory Dom ain 1. Go to TCP/IP Configur ation in Netw ork Settings. Enter the IP address of primary DNS server .
- 115 - 2. Go to Microsoft Networking of Networ k Settings. Enable AD Domain Member , and enter the domain name and the us er na me with administr ator access right to that domain. Note: a. Make sure that a fully qu alified domain name such as qatest.
- 116 - 3. When the following message appears after appl ying the settings in step 2, check the DNS IP . When the following message appears afte r applying the settings in step 2, domain name, domain user name, and the password. When the following message appears afte r applying the settings in step 2, check the time zone settings.
- 117 - 4. Upon successful adding of domain member , you can view the list for domain users and local users in User Manag ement. 5. Go to Access Control in Network Sh are Management to configure the access control right of AD users for all av ailable network shares.
- 118 - Using AD users to access services T o access services like FTP , Network Neighb orhood, or Apple T a lk with an AD user account, add DomainName before the user name when logging in.
- 119 - Adding GNS-8000B to Wind ows Server 2000 NT Domain 1. Go to Microsoft Networking to e n able NT Domai n member and then enter the domain name such as sub1 and the us er who has administrator acces s right for identification.
- 120 - 2. When the following message appears after appl ying the settings in step 1, check the domain name, domain user name, and the password. When the following message appears afte r applying the settings in step 2, check the time zone settings. Mak e sure the difference of your time and that of AD server is l ess than 5 minutes.
- 121 - 4. Go to Access Control in Network Sh are Management to configure the access control right of domain u sers for all available network shares. Using domain users to access s ervices T o access services like FTP , Network Neig hborhood, or Apple T alk with an domain user account, add DomainName before the user name when logging in.
- 122 - Appendix C Messages of Hard Disk and Disk Configuration Status Hard Disk English Display Status Description Re ady The hard disk status i s normal No disk No disk currently Disk tray is not installed or there is main board error . Users can check disk tray .
- 123 - Disk Configuration/ RAI D Configuration English Display Status Description Re ady The status of current d isk or disk configur ation is normal Unmounted Hard disk is not installed or h ard dis.
- 124 - Appendix D: Virus Scan A network share may not be abl e to dete ct a virus without an automatic virus scan function when t here is a transfer of i nfected files.
- 125 - 3. Click Finish to complete the Setup..
- 126 - A screen will pop up to show th e sy stem in formation the first time you have successfully i nstalled the vi rus scan agent. The description of the fields is as below: Fields Description Serv.
- 127 - IP Address The IP addre ss of the network shar e Status Connection status of th e host network share with the virus scan agent: • Disconnect: Not connected to the network • Idle: Connection has been enabled but there is no file transfer for three minutes or more.
- 128 - Enabling Virus Scan Support Go to Virus Scan of S y stem T ools. T o enable virus scan support, tick the bo x Enable Virus Scan Support. Enter the I P address of the virus scan ser ver and click Apply . Viewing Details of Infected Files T o view the detail s of infected files of the network share, go to Event Logs of Statistics & Logs.
- 129 -.
- 130 - GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C ) 1989, 1991 Fre e Software Foundati on, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitt ed to copy and distribute ver batim copies o f this license document, bu t changing it is not allowed.
- 131 - GNU GENERAL PUBLI C LICENSE Terms And Conditions For Copying, Distribution And Modification 0. This License applies to any pr ogram or other wo rk which contains a noti ce place d by the copyright holder saying it may be distri buted under the term s of this General P ublic License.
- 132 - themselves, then this License, and its terms, do not apply to those sections whe n you distribut e them as separate works. But when you d istribute the same sections as part of a whole which i.
- 133 - or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this Licen se, si nce you have not sig ned it. Howeve r, nothing else grants you pe rmission to m odify or distribute the P rogram or its derivative wor ks.
- 134 - 9. The Free S oftware Fou ndation may publish revise d and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problem s or concerns.
- 135 - NO WARRANTY 11. BECAUSE THE PROGRAM I S LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGR AM, TO THE EXT ENT PERMIT TED BY A PPLICABLE LAW.
デバイスLevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
LevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。LevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。LevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
LevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、LevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
