LexmarkメーカーPrinterの使用説明書/サービス説明書
ページ先へ移動 of 455
www.lexmark.com A ugust 2004 Lexmark and Le xm ar k with diamond design are trademarks of Lexmark Inter national, Inc., registered in the United States and/or other countries.
Edition: A ugust 2004 The followi ng paragraph does not apply to any count ry where su ch pro vision s are inconsistent with local law: LEXMARK INTERNA TIONAL, INC.
Conten ts TO C - 1 Contents Introduction ................ .......................................... ............ 1-1 Overview...... ................... ................... .................. ........................ .................. ..... 1-1 Navigational Tip s .
Conten ts TO C - 2 PCL Emulation Commands .......... ................... .................. ................... ............ 2-62 PCL Emulation Commands by Function ............. ....................... ................. 2-62 GL/2 Comma nds ..........
Conten ts TO C - 3 Printable Areas ................... ................... ................... .................. ................... 4-3 Logical Pa ge Size .............. ................... ....................... ................... .............. 4-4 PostScrip t Emulation Fonts for the Lexmark X422 .
Conten ts TO C - 4 File Naming Co nventions ................. ................... ................... .................. ..... 6-9 Device Se arch Order............... ................... .................. ................... ............ 6-12 Performance .
Conten ts TO C - 5 Printer-to-Computer Co mmunication (Advanced Sta tus) ........... ................. 8-17 Parallel Mode 1 ......... ....................... ................... ................... .................. ... 8-18 Parallel Mode 2 .........
Introduction 1-1 CHAPTER 1: Intr oduction Overvie w The f ollowing edit i on of the T echnical R ef erence conta ins inf or mation about pr inter commands and printer lang uages supported by the f oll.
Introduction 1-2 Printed documentation i s also av ailab l e f or some Le xmar k pr inters . Obtain the correc t par t number f rom the f ollowi ng tabl e, call 1-800-553-9727, an d select option #1 to order a T echnical Ref erence f or y our printer .
Introduction 1-3 Chapter 7: “P rinter Specifi cations” Lists pr inter speci fications, including inf ormation about hardw are and en vironmental conditi ons.
Introduction 1-4 Na vigational Tips If y ou are not famil iar with PDF files , the fol lowing tips ma y help you fi nd the inf or m ation yo u need. • T o mov e f orward and bac kward through thi s document : – Select an optio n under Vie w in the menu bar at the top of the page .
Introduction 1-5 Bibliogr aphy F or detailed i nformation about PCL emulation pr inter commands, P ostScript emulati on pr inter commands and operato rs, and inter f aces , re fer t o the f ollowing d.
PCL 2-1 CHAPTER 2: PCL Em ulation When you selec t PCL emulati on as the printe r lan guage, the printer suppor ts the Hewl ett-P ackard C ompany’ s Las erJet Printer Command Language . This ch apter show s how to sel ect PCL emulation and disc usses PCL emulation commands , along with resid ent PCL emulati on font and symb ol set suppor t.
PCL 2-2 Using Y our Software Program T o select PCL em ulation, use the Printer Job Language (PJL) Enter Language Command. See “ENTER LANGU AGE Command” on page 3-3 f or more inf or mation. See “Printer Job Language” on page 3-1 f or the syntax and use of PJL.
PCL 2-3 P a g e Formatting The printab le areas and logical pages for PC L em ulation (both portrait and landsc ape orientation) a re illustr ated belo w .
PCL 2-4 Lexmark C510(n) The f ollo wing tabl e lists page si zes and print area di m ensions f or all paper and env elope siz es the Le xmark C510(n) printer suppor ts . F or more inf orm ation a bout the printab le areas and logical pages f or PCL emulation, see “Printab le Areas” on page 2-3.
PCL 2-5 Lexmark X422 The f ollo wing tabl e lists page si zes and print area di m ensions f or all paper and env elope siz es the Le xmark X422 printer suppor ts. F or more inf ormation about the printab le areas and logical pages f or PCL emulation, see “Printab le Areas” on page 2-3.
PCL 2-6 Lexmark E230, E232, E234(n), E330, E332n The f ollo wing tabl e lists page si zes and print area di m ensions f or all paper and env elope siz es the Lexmark E230, E232, E234( n), E330, and E332n printer suppor ts.
PCL 2-7 Print Area Menu Item The printab le area is the area on a sheet of paper within which a pel can be printed. Logical page is a concept ual entity that defines t he area in which margins (top , bottom, left, right) ma y be set and the area in which the PCL cursor ma y be positioned.
PCL 2-8 The Whole P age setting only af fects pages printed when using PCL emulati on. I f Whole P age is selected, the PCL language set s the logical page area equal to the ph ysical page dimensions . Since the logical page dimensions and the ph ysical page dimensions are t he same , in theor y , the cursor may be positioned an ywhere on the page.
PCL 2-9 Font and Symbol Se t Suppor t f or the Le xmark X422 Y our pr inter has 91 resident f onts in PC L emul ation, including 8 9 scalabl e font s and two bi tmapped f onts. Se ver al paramete rs are used to se lect a f ont from t he data stream. These include symbol set, spaci ng, point or pitch, style , weight , and ty peface n umber .
PCL 2-10 Y ou can also select f onts using PJL commands. The sel ecti on parameter is the number portion from the f ont ide nti fier sho wn on the f ont sample pages , such as 0 or 76 from f ont identif ie rs R0 or R76. Use the PJL v a lues show n in the tab les beginning on page 2-15 to s elect a symbol set.
PCL 2-11 CG Times 0 0 4101 A CG Times Ita lic 1 0 4101 A CG Times Bold 0 3 4101 A CG Times Bold Italic 1 3 4101 A Univ ers Medium 0 0 4148 A Univ ers Medium Ita lic 1 0 4148 A Univ ers Bold 0 3 4148 A.
PCL 2-12 Times New Roman 0 0 1690 1 B Times New Roman Italic 1 0 16901 B Times New Roman Bold 0 3 16901 B Times New Roman BoldItalic 1 3 16901 B Arial 0 0 16602 B Arial Italic 1 0 16602 B Arial Bold 0.
PCL 2-13 T ype 1 Fonts Thir t y of the T ype 1 f onts hav e diff erent font s election paramet ers in the f orward and back ward compatibili ty modes and 9 of the f onts work only in the f orward compatibil ity mode . With the appropriat e printer driv er install ed and selected, y our sof tware applicat ion selects thes e fonts .
PCL 2-14 Helv etica Narro w Italic 5 0 24580 5 0 61444 B Helv etica Narro w Bold 4 3 24580 4 3 61444 B Helv etica Narro w Bold Itali c 5 3 24580 5 3 61444 B Helv etica Li ght 2 0 -3 24580 0 -3 61444 C.
PCL 2-15 Y our Lexmark printer def aults to the f or ward compatibili ty mode to enabl e a Hewl ett-P ackard Compan y’ s driver to sel ect the forw ard compatibil i ty fonts . The Le xmark PCL driver uses the bac kw ard compatibilit y mode and temporarily s witches the printer to this mode .
PCL 2-16 PS Math 5M PSMA TH ✓✓ Math-8 8M MA TH8 ✓✓ Pi F ont 15U PIFONT ✓✓ Microso ft Publishi ng 6J MSP U BL ✓✓ Windo ws 3.0 Latin 1 9U WIN30 ✓✓✓✓ Windo ws Latin 1 19U WINL1 .
PCL 2-17 PC-8 53 La ti n 3 (T ur ki sh) 18U ✓ PC-8 P olis h Mazo via 24Q ✓✓ Windo ws Cyrillic 9R ✓ ISO 8859- 5 Latin/Cyrillic 10N ✓ PC-866 Cy r illic 3R ✓ PC-855 Cy r illic 10R ✓ Russian.
PCL 2-18 All f onts that suppor t the Roman-8 (8U) symbol set also suppor t the f ollowing 19 symbol sets . C39 Bar Code (plus Human Readab le) 209Y Code 3 of 9 OC R-A 0O OCR- A OC R-B 1O OCR- B T abl.
PCL 2-19 Font and Symbol Se t Suppor t f or the Le xmark C510(n) Y our pr inter has 91 resident f onts in PC L emul ation, including 8 9 scalabl e font s and two bi tmapped f onts. Se ver al paramete rs are used to se lect a f ont from t he data stream.
PCL 2-20 Y ou can also select f onts using PJL commands. The sel ecti on parameter is the number portion from the f ont ide nti fier sho wn on the f ont sample pages , such as 0 or 76 from f ont identif ie rs R0 or R76. Use the PJL v a lues show n in the tab les beginning on page 2-15 to s elect a symbol set.
PCL 2-21 Courier Bold Ital i c 1 3 4099 A CG Times 0 0 4101 A CG Times Ita lic 1 0 4101 A CG Times Bold 0 3 4101 A CG Times Bold Italic 1 3 4101 A Univ ers Medium 0 0 4148 A Univ ers Medium Ita lic 1 .
PCL 2-22 Coronet 1 0 4116 B Times New Roman 0 0 1690 1 B Times New Roman Italic 1 0 16901 B Times New Roman Bold 0 3 16901 B Times New Roman BoldItalic 1 3 16901 B Arial 0 0 16602 B Arial Italic 1 0 1.
PCL 2-23 T ype 1 Fonts Thir t y of the T ype 1 f onts hav e diff erent font s election paramet ers in the f orward and back ward compatibili ty modes and 9 of the f onts work only in the f orward compatibil ity mode . With the appropriat e printer driv er install ed and selected, y our sof tware applicat ion selects thes e fonts .
PCL 2-24 Helv etica Narro w Italic 5 0 24580 5 0 61444 B Helv etica Narro w Bold 4 3 24580 4 3 61444 B Helv etica Narro w Bold Itali c 5 3 24580 5 3 61444 B Helv etica Li ght 2 0 -3 24580 0 -3 61444 C.
PCL 2-25 Y our Lexmark printer def aults to the f or ward compatibili ty mode to enabl e a Hewl ett-P ackard Compan y’ s driver to sel ect the forw ard compatibil i ty fonts . The Le xmark PCL driver uses the bac kw ard compatibilit y mode and temporarily s witches the printer to this mode .
PCL 2-26 PS Math 5M PSMA TH ✓✓ Math-8 8M MA TH8 ✓✓ Pi F ont 15U PIFONT ✓✓ Microso ft Publishi ng 6J MSP U BL ✓✓ Windo ws 3.0 Latin 1 9U WIN30 ✓✓✓✓ Windo ws Latin 1 19U WINL1 .
PCL 2-27 PC-8 53 La ti n 3 (T ur ki sh) 18U ✓ PC-8 P olis h Mazo via 24Q ✓✓ Windo ws Cyrillic 9R ✓ ISO 8859- 5 Latin/Cyrillic 10N ✓ PC-866 Cy r illic 3R ✓ PC-855 Cy r illic 10R ✓ Russian.
PCL 2-28 All f onts that suppor t the Roman-8 (8U) symbol set also suppor t the f ollowing 19 symbol sets . C39 Bar Code (plus Human Readab le) 209Y Code 3 of 9 OC R-A 0O OCR- A OC R-B 1O OCR- B T abl.
PCL 2-29 Font and Symbol Se t Suppor t f or the Le xmark E230, E232 Y our pr inter suppo r ts 19 f onts in P CL emulation, i ncluding 17 scalab le f onts and t wo bitmapped f onts . Se ver al paramete rs are used to se lect a f ont from t he data stream.
PCL 2-30 Forward and Bac kwar d Co mpatib ility Mo des for the Lexmark E230, E232 Y our PCL emulatio n has f orward and b ackwa rd compatibilit y modes. The for ward compatibil ity mode is use d to emulate t he f onts in the He wlett-P ackard Compan y’ s LaserJet 4050.
PCL 2-31 Specialty PCL Fonts The f ollowi ng tabl e lists the f ont select ion commands f or f orward and backw ard compatibil ity mode f or each of t he five specialty PCL f onts . Since the f ont sel ection commands f or the f orward and backw ard compatibil ity modes are identical, the y are listed together in t he tab le.
PCL 2-32 Selecting Symbol Sets for Le xmark E230 , E232 T o determine if a f ont or t ypefa ce suppor ts a symbol set, see the comple te listing of PCL emulation f onts and symbol sets i n the f ollow.
PCL 2-33 POSTNET Barcode ✘✘✘✘✘✘✘✘✘ ✘✘✘✘✘✘✘ ✘✘✘✘✘✘✘✘ C39 Narrow ✘✘✘✘✘✘✘✘✘ ✘✘✘✘✘✘✘ ✘✘✘✘✘✘✘✘ C39 Regular .
PCL 2-34 T able 2-17: PCL Emulation Sy mbol Sets - Latin 2, Latin 5, Latin 6, Cyrillic, Greek T ypeface / Symbol Set Lati n 2 Latin 5 Lati n 6 Cyrillic Gre ek Windo ws 98 Latin 2 ISO 8859 -2 Latin 2 P.
PCL 2-35 T able 2-18: PCL Emulation Symbol Sets - Specials Specials T ypeface / Symbol Set V entura Math PS Math Math-8 Pi f ont Micr osoft Publishing PC-911 Kata kana POSTNET Bar code OCR-A OCR-B C39.
PCL 2-36 All f onts that suppor t the Roman-8 (8U) symbol set also suppor t the f ollowing 19 symbol sets . T able 2-19: I SO PCL Emula tion Symbol Sets Symbol Set ID Symbol Set / T ypeface 1E ISO 4: .
PCL 2-37 Font and Symbol Se t Suppor t f or the Le xmark E234(n), E330, E332n Y our pr inter has 91 resident f onts in PC L emul ation, including 8 9 scalabl e font s and two bi tmapped f onts. Se ver al paramete rs are used to se lect a f ont from t he data stream.
PCL 2-38 on page 2-43 to s elect a symbol set. If a symb ol set does no t hav e a PJL v alue, use the symbol set ID to select the sy mbol set. A f ont selection can be either t em porary or set as the def ault. Use the f ollowing PJL commands to select f onts: FONTSOURCE, FONTNUMBER, PITCH, PTSIZE, SYMSET , SET , DEF A UL T .
PCL 2-39 U n i v e r s B o l d I t a l i c 1134 1 4 8 T i m e s N e w R o m a n 1001 6 9 0 1 T i m e s N e w R o m a n I t a l i c 1101 6 9 0 1 T i m e s N e w R o m a n B o l d 1031 6 9 0 1 T i m e s.
PCL 2-40 T ype 1 Fonts Thir t y of the T ype 1 f onts hav e diff erent font s election paramet ers in the f orward and back ward compatibili ty modes and 9 of the f onts work only in the f orward compatibil ity mode . With the appropriat e printer driv er install ed and selected, y our sof tware progr am selects these font s.
PCL 2-41 ITC Book man Light 1 0 -3 24623 1 0 -3 61487 ITC Book man Light Italic 1 1 -3 24623 1 1 -3 61487 I T C B o o k m a n D e m i 1022 4 6 2 3 1026 1 4 8 7 I T C B o o k m a n D e m i I t a l i c .
PCL 2-42 Y our Lexmark printer def aults to the f or ward compatibili ty mode to enabl e a Hewl ett-P ackard Compan y’ s driver to sel ect the forw ard compatibil i ty fonts . The Le xmark PCL driver uses the bac kw ard compatibilit y mode and temporarily s witches the printer to this mode .
PCL 2-43 Selecting Symbol Sets for the Le xmark E234 (n), E330, and E332n T o determine if a f ont or t ypefa ce suppor ts a symbol set, see the comple te listing of PCL emulation f onts and symbol se.
PCL 2-44 Times New Roman ✓✓✓✓✓✓✓ ✓✓ ✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓ Times New Roman Italic ✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓ T.
PCL 2-45 CG Omeg a Italic ✓✓✓✓✓✓✓ ✓✓ ✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓ CG Omeg a Bold ✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓ CG Omeg .
PCL 2-46 P alatino It alic ✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓ P alatino B old ✓✓✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓ ✓✓✓✓✓✓✓✓ P alati.
PCL 2-47 Times Rom an ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Times It alic ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ .
PCL 2-48 T able 2-24: PCL Emulation Sy mbol Sets - Latin 2, Latin 5, Latin 6, Cyrillic, Greek T ypeface / Symbol Set Lati n 2 Latin 5 Lati n 6 Cyrillic Gre ek Windo ws 98 Latin 2 ISO 8859 -2 Latin 2 P.
PCL 2-49 Arial Bold I talic ✓✓✓✘ ✓✓✓✓✘ ✓✓✓✓✓ ✘✘✘✘✘✘✘✘✘✘✘✘✘✘ Letter Gothi c ✓✓✓✘ ✓✓✓✓✘ ✓✓✓✓✓ ✘✘✘✘✘✘✘✘.
PCL 2-50 Antique O live Bold ✓✓✓✘ ✓✓✓✓✘ ✓✓✓✓✓ ✘✘✘✘✘✘✘✘✘✘✘✘✘✘ Albe r t us Me diu m ✓✓✓✘ ✓✓✓✓✘ ✓✓✓✓✓ ✘✘✘✘✘.
PCL 2-51 ITC Book man Demi ✓✓✓✘ ✓✓✓✓✘ ✓✓✓✓✓ ✘✘✘✘✘✘✘✘✘✘✘✘✘✘ ITC Bookma n Demi Italic ✓✓✓✘ ✓✓✓✓✘ ✓✓✓✓✓ ✘✘✘✘✘.
PCL 2-52 Times It alic ✓ ✓ ✓ ✘ ✓ ✓ ✓ ✓ ✘ ✓ ✓ ✓ ✓ ✓ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times Bo ld ✓ ✓ ✓ ✘ ✓ ✓ ✓ ✓ ✘ ✓ ✓ ✓ ✓ .
PCL 2-53 T able 2-25: PCL Emulation Symbol Sets - Specials Specials T ypeface / Symbol Set V entura Math PS Math Math-8 Pi f ont Micr osoft Publishing PC-911 Kata kana POSTNET Bar code OCR-A OCR-B C39.
PCL 2-54 Arial Bold I talic ✓✓✓✓ ✓ ✘✘✘✘ ✘ ✘ ✘ ✘✘✘✘✘ Letter Gothi c ✓✓✓✓✓ ✘✘✘✘ ✘ ✘ ✘ ✘✘✘✘ ✘ Letter Gothi c Italic ✓✓✓✓✓ ✘.
PCL 2-55 Clarend on Co nd ens ed Bold ✓✓✓✓✓ ✘✘✘✘ ✘ ✘ ✘ ✘✘✘✘✘ Mar igo ld ✓✓✓✓✓ ✘✘✘✘ ✘ ✘ ✘ ✘✘✘✘ ✘ Coronet ✓✓✓✓✓ ✘✘✘✘.
PCL 2-56 ITC A van t Garde Demi ✓✓✓✓✓ ✘✘✘✘ ✘ ✘ ✘ ✘✘✘✘✘ ITC A van t Garde Demi Ob lique ✓✓✓✓✓ ✘✘✘✘ ✘ ✘ ✘ ✘✘✘✘ ✘ Century School boo k .
PCL 2-57 C39 Narrow ✘✘✘✘✘✘✘✘✘ ✓ ✓ ✓ ✘✘✘✘✘ C39 Regular ✘✘✘✘✘✘✘✘✘ ✓ ✓ ✓ ✘✘✘✘✘ C39 W ide ✘✘✘✘✘✘✘✘✘ ✓ ✓ ✓ ✘✘.
PCL 2-58 All f onts that suppor t the Roman-8 (8U) symbol set also suppor t the f ollowing 19 symbol sets. T able 2-26: I SO PCL Emula tion Symbol Sets Symbol Set ID Symbol Set / T ypefa ce 1E ISO 4: .
PCL 2-59 Command Structure This sect ion introduces the diff erent types of PCL emulation commands and their structure , or syntax. It also demonstrates ho w you can link commands to ab brev iat e them. Contr o l Codes Control Codes are singl e-character inst ructions .
PCL 2-60 Comma nd Structure Most PCL emulation c ommands hav e the f ollo wing structure: ESC & a # C Spaces hav e been added to this e xample f or readability . The command parame ter v ar iab les are indicated b y a number sign (#). Comma nd P a rameter s A command par ameter sets t he v alue f or a command.
PCL 2-61 Example: ESC (s16.66H • Decimal: 27 40 1 15 49 54 46 54 5 4 72 • He x: 1B 28 73 31 36 2E 36 36 48 Use the plus symbol (+) or the min us symbol (–) to select a position rel ative to the current cur sor position.
PCL 2-62 PCL Em ulation Commands See the f ollowi ng tab les f or a listing of the commands group ed b y function. T o deter mine which commands y our printer supports, see “T abl e A-1: PCL Emulati on Commands” on page A-1.
PCL 2-63 ESC &u#D Range = (96, 100, 120, 144, 150, 160, 18 0, 200, 225, 24 0, 28 8, 300, 360, 400, 450, 480, 600, 720, 8 00, 9 00, 1200, 1440, 180 0, 24 00, 3600, 7200) Def ault = 300 uni ts per inch Unit of Meas ure Sets the s i ze f or the PCL Unit (units per inch).
PCL 2-64 T able 2-30: Page Control Command / P arameters Function / Res ult ESC & l #A Pap e r 1 Exec utive 2 Letter 3 Legal 4, 10 Foli o 6, 11 Ledger (11 x 17) 13, 25 A5 P aper 15 Sta tement 26 A.
PCL 2-65 ESC &f#O 0S h o r t - e d g e 1 Long-edge Set Univ ersa l Feed Dir ect i on Sets the f eed di rection of Univ ersal si ze. F eed di rection means w hich side of t he print medi a, either the short edge o r the long edg e, f eeds first through the printer firs t.
PCL 2-66 ESC & l #F # = num ber of Lines Def ault = 60 o r 64 (Country specific ) Set T e xt Length Sets the b ottom margin len gth in lines , measured f rom the first lin e of the page . T ext Len gth equals Logic al P age Length –1 in ch (–1 / 2 inch f or top and –1/2 inc h for botto m).
PCL 2-67 ESC & l #D 1 1 line/i nch 22 l i n e s / i n c h 33 l i n e s / i n c h 44 l i n e s / i n c h 6 6 lines/i nch (Defaul t) 88 l i n e s / i n c h 12 12 lines/in ch 16 16 lines/in ch 24 24 lines/in ch 48 48 lines/in ch Set Line Spac ing (Alternative Method) Spec ifi es VMI in l ines per in ch.
PCL 2-68 T able 2-31: Alphanumeric ID Command / P arameters Function / Res ult ESC &n#W [ope r ation] [string] # = numb er o f da t a bytes t hat make up the oper ati on and string Opera tion oper.
PCL 2-69 ESC &a#R # = numb er o f Rows 1 V ertical Cursor Po sition (in Rows) Mov es the c ursor to a ne w positio n along the v er tical axis . Note: Row h eight is determined b y either the V ertical Motion I ndex (VMI) or the Set Line Spacing Command.
PCL 2-70 Note: F or the c om mands listed i n T ab le 2-33, font selection is based on all parameter s set foll o wing the best fit selection rules . T able 2-33: Font Selection Command / P arameters .
PCL 2-71 ESC (s#B (primary) ESC )s#B (se con dary) -7 Ultra Thi n -6 Extra Th in -5 Thin -4 Extra L ight -3 Light -2 Demi Li ght -1 Semi Light 0 Medium (Def ault) 1 Semi Bold 2 D e m i B o l d 3 B o l d 4 Extra Bold 5 Blac k 6 Extra Blac k 7 Ultr a Bl ack Select Str oke W eight Selects a font wi th a particular thic kness.
PCL 2-72 ESC &t#P 0, 1 1 byte char ac ters 21 1 or 2 b yte char acters 31 1 or 2 b yte charac ters 38 1 or 2 b yte charac ters 1008 1, 2, or 3 b yte charac ters (UTF-8) T ext P arsing Method Commun icates to the PCL parser whether c h aracter code s are interpreted as 1-b yte or 2-b yte char acter codes.
PCL 2-73 T able 2-35: Font Creation Command / P arameters Function / Res ult ESC *c#D # = F ont ID # (0 - 32 767) Def ault = 0 Set Font ID Sets the i dentificatio n number f or the f ont being downloaded. ESC )s#W [data] # = num ber of data b ytes Load Font Hea der Down loads soft f ont hea der inf or mation.
PCL 2-74 T able 2-37: Print Model Command / P arameters Function / Res ult ESC *c#G Gray Scale Fills 0 White (def ault) 1-2 2% gra y 3-10 10% gr ay 11-2 0 15% gray 21-3 5 30% gray 36-5 5 45% gray 56-8.
PCL 2-75 T able 2-38: User -Def ined Patt ern Command / P arameters Function / Res ult ESC *c#W[ data] # = num ber of data b ytes User -Defined P attern Down loads binary pattern data.
PCL 2-76 ESC *c#G Gray Scale Fills 0 White (def ault) 1-2 2% Gra y 3-10 10% Gr ay 11-20 15% Gr ay 21-35 30% Gr ay 36-55 45% Gr ay 56-80 70% Gr ay 81-99 90% Gr ay 100 100% Gr a y (Blac k ) Cross-Hat ch.
PCL 2-77 T able 2-40: Raster Graphics Command / P arameters Function / Re sult ESC *t#R 75 75 dpi 100 100 dpi 150 150 dpi 200 200 dpi 300 300 dpi 600 600 dpi 1200 1200 d pi Raster Resolution Note: 200 dp i is only supp or ted wh en the prin ter is operatin g in 600 dpi or 1200 dpi m ode.
PCL 2-78 ESC *b#M 0 Uncoded (De fault) 1 Run-Length Enc oded 2 T agged Imag e File F o r mat (TIFF) by te 3 Delta Row 5 Adaptiv e Co mp res si on 9 Replacement Delta Ro w 999 Zli b 1002 Group 4 1003 G.
PCL 2-79 ESC *t#V Ras ter Height (Destination) Sets the h eight of the d estination r aster . ESC *g #W[data] # - 8 (K-only ) or 26 (KCMY) Data Byte 0 - 0x 02 (constant) Byte 1 - nu mber o f col or s .
PCL 2-80 T able 2-41: Color Extensions Command / P arameters Function / Res ult ESC &b#M 0 Print in mix ed rend er algorithm mode 1 P r i nt u sing gray scal e eq ui valen t Monochr ome Print Mod e Cha nges ea ch co lor valu e to i ts gray scal e equi valent .
PCL 2-81 ESC *t#I 0 Gamma Correc tion Off 0.0 to 4.0 Gamma Num ber Gamma Cor rection Impro ves the pe rceptual cor rectness of c olor data sent fr om the monitor to any othe r non-linear d evice b y adjustin g the brightness and darknes s. ESC *t#J Render Algorithm Selects t he algorithm use d for d ithering images an d fills.
PCL 2-82 T able 2-42: Status Readback Command / P arameters Function / Res ult ESC *s#T 0 Inv alid loca tion (Def ault) 1 Use curr ently sele cted locatio n 2 All locat ions 3 Internal (reside nt) 4 D.
PCL 2-83 T able 2-43: Picture Frame Command / P arameters Function / Res ult ESC *c#X # of Dec i points: 0 to 32 767 (1 Deci point = 1/720 inc h) Picture Fra me Horizontal Size (in Decipoints) Specifies the horizontal dimension of th e picture fr ame used when pr int i ng a GL /2 plot.
PCL 2-84 GL/2 Com mands Note: GL/2 is not a stand-a lone pl ot ter em ul ation. It ca n only be entered fr om wit hin PCL emulation and cannot be used w ith soft ware witho ut a unique printer dr iver wri tten explicitly for GL/2. The f ollowing tab les list the GL/2 commands b y group .
PCL 2-85 IR (X P1 , Y P1 (, X P2 , Y P2 )); Input Rel a tive P1 an d P2 IW (X 1 , Y 1 , X 2 , Y 2 ); Input Windo w MC (mo de(, opcode)); Logica l Operatio n PP (mode); Pix el Placement RO (a ngle); Ro.
PCL 2-86 RA X, Y ; Fi ll Rectangle Ab solute RR X, Y ; Fill Rectangle Relative WG rad ius, start_angle , sw eep_angle(, cho rd_angle); Fill W edge T able 2-48: Character Grou p Command / P arameter Comma nd Name AD (kind, v alue(,.
PCL 2-87 T able 2-49: Line and Fill Attrib utes Gr oup Command / P arameter Comma nd Name AC (X, Y); Anchor Corner CR (red black ref , red white r ef , g reen black ref , gree n white ref , b lue blac.
PCL 2-88 Raster I mage Grap hics These commands utilize the raster area. Bef ore sendin g data, set the presentation mode, the resoluti on, the compression mode, the raster height a nd width, and s t ar t raste r graphi cs. These parameter s are in ef fect u ntil you ov erwr ite them with a diff erent comm and or ther e is a printer r eset.
PCL 2-89 Descriptions and e xamples of the diff erent parameters appear on the f ollowing pages . Each e xa mple dr a ws the same square out line 64 bi ts (8 b yt es) wide b y 64 scan lines long. Unc oded Da ta Uncoded Data is not compresse d. Only those bytes needed to f or m the image are sent.
PCL 2-90 Run -Length Encoded D ata Run-Length Enc oded Data is i nter preted in pai rs of b ytes. The first b yte: • Acts as a counter , or control by te. • Indicate s how man y times to repeat the data in t he second b y te. • Can be from 0 (no repetiti on) to 255.
PCL 2-91 Delta Row Delta Ro w is a compression mode that i denti fies and transmits only tho se by tes diff erent from the ones in a preceding ro w . Th e control b yte consi sts of two pa r ts: • High 3 bits: Number of b ytes to replace +1 (1 to 8).
PCL 2-92 Adaptive Compression Adaptiv e compression al lows the combined us e of compression methods 0 t hrough 3 (Uncoded, Run-Lengt h En coded, TIFF , and Delta Row). It also allo ws the pr inting of empty ro ws (all z eros) or du plicate rows . • The T ransf er Raster Data command siz e includes all ro ws (scan lines).
PCL 2-93 Zlib Zlib is a gen eric compression method. It ref ers to a stand ard f or compression as w el l as the l ibrar y that implements the standard. The zlib compres sion m ethod uses the deflat e algorithm. This same algorithm is used by more wid ely known compress ion utilities such as PKZIP and GZIP .
PCL 2-94 The f ollow ing exampl e pr ints a Group 4 image file that i s 256 bits wide and 9,645 byte s long: ESC *b1002 M |Set Raster Compression to Group 4 ESC *r256S |Def ine width of im age in input bi ts ESC *r1A |Start Raster Graphics at current positi o n ESC *b9645 W |9,645 b y tes of a Gro up 4 image .
PCL 2-95 Macr os When creating a macro , first assign it an ID number . If th is n umber is identical to an e xisting macro ID in RAM, the old macro is deleted when y ou specify the Macro Control Star t Definition . Nex t , star t the macro defi nition, send the contents of the macro , and s top the macro defi nition.
PJL 3-1 CHAPTER 3: Printer Job Languag e Y our pr inter suppo r ts complete Printer J ob Language (PJL) c om mands, incl uding cer tain commands t hat cause the pr inter to e nter PCL emulation, P ostScript emulati on, and P ersonal Printer Data Stream (PPDS).
PJL 3-2 Notes: • P ar amet ers enclos ed in squar e brac ke ts ([ ]) are optiona l and not required f or command ex ecution. • The PJL inter preter requir es uppercase f or the @PJL prefix f or all PJL com- mands except the Unive rsal Exit Language (UEL) command.
PJL 3-3 ENTER LANGU A GE Com mand This command causes the printer to enter t he specified langu age, such as PCL emulation, P ostScript emulation, or PPDS. Syntax: @PJL E NTER LANG UAGE = la ngua ge [<C R>]< LF> Notes: • langua ge is PCL , PCL3, PCLXL , PostScr ipt , or PP DS .
PJL 3-4 Job Separat ion Commands Y our pr inter suppor ts the PJL JOB and EOJ commands. When the printer receiv es a JOB command, the print timeout is m ultiplied b y 10; when the printer receiv es a PJL EOJ command, the print timeout is reset t o the user def ault.
PJL 3-5 Pa r a m e t e r s : NAME = " job name " Use the NAME par ameter to assign a charact er string name to a particular job . The name may be any combination of printab le character s, spaces or horizont al tabs up to a maximum of 80 char act ers, spaces , or tabs.
PJL 3-6 F or detailed information on PJL pass word protecti on, see “File and Dev i ce Protecti on Co mmands” on page 3-93. Note: Setting a def ault PJL pass word dis ab les the use of PJL DEF A UL T and INITIALIZE commands . (See “DEF A UL T Command” on page 3- 8 and “INITIALIZE Command” on page 3-11.
PJL 3-7 En vir onment Commands and V ariables This secti on describes the printer en vironment v ariables an d the PJL commands used to modif y or quer y the variab les. Note: The word common appl ies to those v ariables common to both y our pr inter and the Hewl ett-P ackard Compan y’ s LaserJet printers.
PJL 3-8 DEF A UL T C ommand This command modifies th e def ault setti ng f or the specified en vironment v ariabl e and stores the setti ng in th e printer NVRAM.
PJL 3-9 variab le= va lue The suppor ted variab les and val ues are l i sted in the tab les beginning on page 3-12. Note: V ariables ma y be modified b y the DEF A UL T command, exce pt those mar ked Read Only . Some variab les ma y onl y be modified using the PJL SET command.
PJL 3-10 • LRESOU RCE: " devi ce:f ilena me.f ilety pe " is requir ed for LRESOURCE v ar iables . (See “T able 3-9: Printer Unique LRESOUR CE V ar iables” on page 3-53.
PJL 3-11 INITIALIZE Com mand This command restores both the cur rent and def ault envi ronment variab l es to their f actor y def a ult val ues and updates the printer NVRAM.
PJL 3-12 Common V ariables f or Both Pr inter Lang uages Note: The word common appl ies to those v ariables common to both y our pr inter and the Hewl ett-P ackard Compan y’ s LaserJet printers. The f ollowing common v ar iab les are suppor ted f or both PCL emulat ion and P ostScript emulati on, unless other wise noted.
PJL 3-13 CPLOCK (DEF A UL T only) Disa bles menus ON , OFF ON di sables the pr i nter operat or panel menus. OFF en ables menus. OFF DENSITY Print Darkness 1 to 5 T o determine the def ault v alue of y our printer , see “T able B-1: Common V ariables f or Both Printer Language s” on page B-1.
PJL 3-14 HOLDTYPE (SET only) Print and Hol d Ty p e PUBLIC , PRIV A TE The HOLD , HOLDKEY , and HOLDTYPE v ariables inter act with each ot her as f ollows: • When HOLD is set to O n, HOLDKEY is set to a va lid PIN, and HOLDTYPE is set to Private , Confide nti al Print capab ility is av ailabl e.
PJL 3-15 JOBOFFSET Offset P ages ON, OFF , BETWEENJOBS , BETWEENCOPIES INQUIRE or DINQ UIRE return s the v a lue of Offs et P ages as f o llo ws: • If Offset P ages is set to Of f, OFF is retur ned. • If Offset P ages is set to Betw een Jobs or Between Copies , ON is returned.
PJL 3-16 OUTBIN Output Bin UPPER, LO WER, OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , OPTIONALOUTBIN6 , OPTIONALOUTBIN7 , OPTIONALOUTBIN8 , OPTIONALOUTBIN9 , OPTIONALOUTBI N 1 0, “name” name is a v ariab le that allo ws fo r custom na ming of optional output bins .
PJL 3-17 PA R A L L E L (DEF A UL T only) (P or t Specific) P arallel Protoc ol SLO W , F AST A va lue of SLO W indicate s the P arallel Protocol setting i s Standard.
PJL 3-18 PO WERSA VETIME (DEF A UL T only) P ow e r Sav e time, in minu tes 0 to 120 (M odel specif ic) 0 to 24 0 (Model speci fic) (0 indicat es the P ower Sa v er Tim e f eatu re is dis ab led.) The time the printer remain s idle bef ore it en ters P ower Sa ve mod e when POWERSA VE is On.
PJL 3-19 Printer Unique V ariables for Both Printer Language s The f ollowi ng variab les are unique t o some Le xmar k printers and ar e suppor ted for both PCL emulation and P ostScript em ulation. Theref ore, the [ command modifi er: va lue ] parameter should not be specif ied.
PJL 3-20 LBONDOUTBIN (DEF A UL T only) Assign T ype/Bin - Bond UPPER, LOWER, DISABLED , OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , OPTIONALOUTBIN6 , OPTIO.
PJL 3-21 LCARDST OCK OU TBIN (DEF A UL T only) Assign T ype/Bin - Card Stock UPPER, LOW ER, DISABLED , OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , OPTIONAL.
PJL 3-22 LCOLOREDLOADING (DEF A UL T only) Colo red Paper Loading OFF , DUPLEX OFF LCOLOREDOUTBI N (DEF A UL T only) Assign T ype/Bin - Colo red Paper UPPER, LOW ER, DISABLED , OPTIONALOUTBIN1, OPTION.
PJL 3-23 LCUST O MP APERHEIGHT Univ e rsal Height 76 to 915 in incr ements of 1 mm 3 to 36.01 in incremen ts of 0.01 in. Note: V alues are determined to b e inches or millimeters based on the LCUST OMP APER UNITS setting . 356, 360, 457 mm 14, 14 .17, 18 in.
PJL 3-24 LCUST OMTYPE1OUTBIN (DEF A UL T only) Assign T ype/Bin - Custom T ype 1 UPPER, LOW ER, DISABLED , OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , OPTI.
PJL 3-25 LCUST OMTYPE2NAME (DEF A UL T only) Custom T ype 2 Name "name" name is a v ariab le that allo ws fo r custom na ming of print material ty pes. The te xt string is trunc ated to 24 char acters. When queried, t he quotes are not returned around the str in g name.
PJL 3-26 LCUST OMTYPE3MEDIA (DEF A UL T only) Custom T ype 3 Medi a P APER, COA TED , GLOSSY , TRANSP ARENCY , LABELS, CARDST OCK, ENVELOPE, CO TTONP APER P APER LCUST OMTYPE3NAME (DEF A UL T only) Custom T ype 3 Name "name" name is a v ariab le that allo ws fo r custom na ming of print material ty pes.
PJL 3-27 LCUST OMTYPE4LOADING (DEF A UL T only) Custom T ype 4 P a per Loa din g OFF , DUPLEX OFF LCUST OMTYPE4MEDIA (DEF A UL T only) Custom T ype 4 Medi a P APER, COA TED , GLOSSY , TRANSP ARENCY , .
PJL 3-28 LCUST OMTYPE5LENGTH (DEF A UL T only) Custom T ype 5 Length NORMAL, SHOR T NORMAL LCUST OMTYPE5LOADING (DEF A UL T only) Custom T ype 5 P a per Loa din g OFF , DUPLEX OFF LCUST OMTYPE5MEDIA (.
PJL 3-29 LCUST OMTYPE5WEIGHT (DEF A UL T only) Custom T ype 5 Wei g h t LIGHT , NORMAL, H EA VY NORMAL LCUST OMTYPE6LENGTH (DEF A UL T only) Custom T ype 6 Length NORMAL, SHOR T NORMAL LCUST OMTYPE6LO.
PJL 3-30 LCUST OMTYPE6TEXTURE (DEF A UL T only) Custom T ype 6 Te x t u r e SMOO TH, NORMAL, ROUGH NORMAL LCUST OMTYPE6WEIGHT (DEF A UL T only) Custom T ype 6 Wei g h t LIGHT , NORMAL, H EA VY NORMAL .
PJL 3-31 LENVELOPETEXTURE (DEF A UL T only) Env elope Te x t u r e SMOO TH, NORMAL, ROUGH NORMAL LENVELOPEWEIGHT (DEF A UL T only) Env elope Wei g h t LIGHT , NORMAL, H EA VY NORMAL LESCCHAR (READ onl.
PJL 3-32 LGLOSSY OUTPUTBIN Ass ign T ype/Bin - Glossy UPPER, L OWER, OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , OPTIONALOUTBIN6 , OPTIONALOUTBIN7 , OPTIONALOUTBIN8 , OPTIONALOUTBIN9 , OPTIONALOUTBI N 1 0, “name” name is a v ariab le that allo ws fo r custom na ming of optional output bins .
PJL 3-33 LIMAGEENHANCETYPE Image Enhancem ent Te c h n o l o g y Ty p e 2, 4, A UT O 2, 4 (Model s pecific) LIMA GEORIENT A TION P age Image Ori enta tio n DONO TRO T A TE, RO T A TEP APER, RO T A TEE.
PJL 3-34 LLABELSOUTBIN (DEF A UL T only) Assign T ype/Bin - Labels UPPER, LOW ER, DISABLED , OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , OPTIONALOUTBIN6 , .
PJL 3-35 LLETTERHEADOUTBIN (DEF A UL T only) Assign T ype/Bin - Letterhead UPPER, LOW ER, DISABLED , OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , OPTIONALOU.
PJL 3-36 LMANU ALCOLORCMYK- IMA GE M anu al C olo r - CMYK Image OFF , VIVID , VIVIDCMYK, USCMYK, EUROCMYK USCM YK (US) EUROCMYK (non-US) LMANU ALENVELOPESIZE Manual Envelope, def ault fo r matting si.
PJL 3-37 LMUL TIP AGEPR INT Multipag e Printing OFF , 2UP , 3UP , 4UP , 6UP , 9UP , 12UP , 16UP OFF LMUL TIP A GEVIEW Multipage Vie w A UTO , SHOR TEDGE, LONGEDG E A UT O LNP AP (READ only) (P or t specific) NP A Protocol Setting ON, OFF , A UT O This v alue is repo r ted fo r the interf ace l ink that the comman d is receiv ed.
PJL 3-38 LOPTIONALOUTBIN6NAME (DEF A UL T only) Opti onal Ou tput Bin 6 Name "name" name is a v ariab le that allo ws fo r custom na ming of optional output bins . The te xt string is tr uncated t o 24 char acters. When queried, t he quotes are not returned around the str in g name.
PJL 3-39 LO VERFLO WOUTBIN (DEF A UL T only) Overf l ow Bin UPPER, LO WER, OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , OPTIONALOUTBIN6 , OPTIONALOUTBIN7 , OPTIONALOUTBIN8 , OPTIONALOUTBIN9 , OPTIONALOUTBI N 1 0, “name” name is a v ariab le that allo ws fo r custom na ming of optional output bins .
PJL 3-40 LPICTURE GRADE PictureGr ade™ ON, OFF ON LPLAINLENG TH (DEF A UL T only) Plain P aper Length NORMAL, SHOR T NORMAL LPLAINOUTBIN (DEF A UL T only) Assign T ype/Bin - Plain Pa p e r UPPER, LO.
PJL 3-41 LPPDS (DEF A UL T only) Activa te P ersonal Printer Data Stream (PPDS) printer language ON, OFF Use ON to enab le PPDS p rinter la nguage and OFF to disab le PPDS printer la nguage . After this co mmand is process ed, the printer perf orms a P ow er On Reset (POR) to act ivate t he changes .
PJL 3-42 LPREPRINTEDOUTBIN Assign T ype/Bin - Preprinted Pa p e r UPPER, LOW ER, DISABLED , OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , OPTIONALOUTBIN6 , O.
PJL 3-43 LPRINTQ UALI TY Pr i nt Quality Mode QUICKPRINT , NORM AL, PRESENT A TION, GRAPHICS , IMAGES , 1200IMA GEQ, INKSA VER, NORMAL, BEST NORMAL LPUNCH Hole Punch ON, OFF O FF LREAR OUTBINNAME Rear Output Bin Name "name" name is a v ariab le that allo ws fo r custom na ming of optional output bins .
PJL 3-44 LST ANDARDOUTBINNAME (DEF A UL T only) Standard Outp ut Bin Name "name" name is a v ariab le that allo ws fo r custom na ming of output bins . The te xt string is truncat ed to 24 char acters. When queried, t he quotes are not returned around the str in g name.
PJL 3-45 L TRANSP ARENCY OUTBIN (DEF A UL T only) Assign T ype/Bin - T ransp arency UPPER, LOW ER, DISABLED , OPTIONALOUTBIN1, OPTIONALOUTBIN2 , OPTIONALOUTBIN3 , OPTIONALOUTBIN4 , OPTIONALOUTBIN5 , O.
PJL 3-46 L TRA Y3SENSEDTYPE P APER Detected T y pe fo r Paper - Tr a y 3 PLAIN, BOND , GLOSSY , CARDST OC K, LABELS , LETTERHEAD , PREPRINTED , COLORED , CUST OMTYPE1, CUST OM TYPE2, CUST OMTYPE3, CUS.
PJL 3-47 L TRA Y2P APER TYPE T ray 2 Paper Ty p e PLAIN, CO A TED , GLOSSY , PHO TO , GREETINGCARD , IR ONON, BOND , TRANSP ARENCY , CARDST OCK, LABELS, LETTERHEAD , PREPRINTED , COLORED , ENVELOPE, C.
PJL 3-48 Common V ariables f or PCL Emulation Note: The word common appl ies to those v ariables common to both y our pr inter and the Hewl ett-P ackard Compan y’ s LaserJet printers. Use these v ar iab l es only fo r PCL emulati on. The [c omma nd m odifi er: value ] parameter should be specif ied as LPARM : PC L .
PJL 3-49 Printer Unique V ariables for PCL Emulation The f ollowing v ar iab les are unique to y our printer and are suppor ted in PCL emulati on only .
PJL 3-50 LASSIGNTRA Y1 T ra y Renumber Assign T ra y 1 OFF , 0 to 19 9 V ariab le used with PJ L SET or DEF A UL T comma nd. OFF OFF , 0 to 19 9, NONE V ariab le used with PJ L INQUIRE or DI N QUIRE comma nd. OFF LASSIGNTRA Y2 T ra y Renumber Assign T ra y 2 OFF , 0 to 19 9 V ariab le used with PJ L SET or DEF A UL T comma nd.
PJL 3-51 Common V ariables f or P ostScript Em ulation Note: The word common appl ies to those v ariables common to both y our pr inter and the Hewl ett-P ackard Compan y’ s LaserJet printers. Use these v ar iab l es only fo r P ostScript emulation.
PJL 3-52 Print er Unique V ariables f or P ostScr i pt Emulat ion The f ollowi ng variab les are unique i n some printers and ar e suppor ted in P ostScript emulati on only . The [ comma nd mod ifie r: va lue ] parameter should be speci fied as LP ARM : POSTSCRI PT .
PJL 3-53 T o deter mine which variab les your printe r supports, see “T able B-7: Pr inter Unique LRESOURCE V ariab les” on page B-1 3. T able 3-9: Printer Unique LRESOURCE V ariabl es Va r i a b .
PJL 3-54 Status Read back Command s Applications can request c onfiguration and status inf ormation from the pr inter using the Status Readback commands .
PJL 3-55 • LPARM: POST SCRIPT is used f or variab les speci f ic f or P ostScript emulation. (See the t abl es “Common V ariable s f or P os tScript Emula tion” on p age 3- 51, and “Printer Uni que V ariab les f or P ostScript Em ulation” on page 3-52.
PJL 3-56 Note: The ECHO command is terminated by the line f eed char act er . INFO Command The INFO command is used to quer y status inf orm ation from the printer . “T able 3-10: I N FO Categor y P arameter V alues” on page 3- 56 lists t he categories of inf orm ation that ca n be queried.
PJL 3-57 INFO CONFIG Response Syntax (An Example): @PJL INFO CONFIG<CR><LF> IN TRAYS [2 ENUMERATED]<CR><LF> INTRAY1<CR><LF> INTRAY2<CR><LF> MANUAL FEED&.
PJL 3-58 INQUIRE Command This command is used to query the current setting of the spe cif ied environment va r i a b l e . Syntax: @PJL I NQUIR E [c omman d mo difi er: va lue ] var iable [<CR>].
PJL 3-59 variab le= va lue The suppor ted variab les are listed in the tab les beginning on page 3-12. This printer returns a ? for inqu ir ies of an unsuppor ted v ariab le, or inqu ir ies of a v ar iab le associated with an option that is not install ed.
PJL 3-60 ustatus variable= value The f ollowing v alues are suppor ted for the ustat us v ariab le= value par ameter . UST A TUSO FF Comman d This command turns off unsolicited status . Unsolicited status ma y also be turned off by usi ng the UST A TUS command on each variab l e.
PJL 3-61 Status Mes sage Format The f or mat of the retur ned inf orm ation from the INFO ST A TUS , UST A TUS DEVICE, and UST A TUS TIMED commands is described in this section.
PJL 3-62 Ready with R epl ac e T ransf er 10006 Replace T ra ns f er TR UE P ow er Sav er with Ink Lo w 10006 88 Ink Lo w TR UE P ow e r Sav er mode with T oner Lo w 10006 88 T oner Low TR UE P ow er .
PJL 3-63 Auto-Con tinuable Conditions These stat us messages are returned indep endent of the stat e of the A uto Cont inue menu item. A uto-cont inuab le messages are retur ned in this f orm : CODE=s.
PJL 3-64 Inte r vent ion req uir e d: serial op tion disab led 30018 56 Serial 1 P ort Disabl ed F ALSE Inte r vent ion req uir e d: stand ard paralle l por t disab led 30018 56 Stan dard P arallel P .
PJL 3-65 Inte r vent ion req uir e d: schedul ed maintena nce 30075 80 Scheduled Maintenance F ALSE Inte r vent ion req uir e d: resource sav e off defic ient memory 30076 35 Res Sa ve Off Deficient M.
PJL 3-66 Inte r vent ion req uir e d: disk ful l 32 002 62 Disk Full F ALSE Inte r vent ion req uir e d: disk co rrupted 32 015 Disk Corrupted. R eformat? F ALSE Inte r vent ion req uir e d: too man y.
PJL 3-67 Attendance Con ditions Attendance condi tions require operat or intervention. Attendance messages are returned in this f orm : CODE=status c ode DISPLA Y=displa y string (in doub l e quotes) .
PJL 3-68 Inte r vent ion req uir e d: cartridge lif e wa r ning 40021 Car tridge Life Warning XXXX FA L S E Inte r vent ion req uir e d: missin g car tridge 40021 31 Missing Cartridge XXXX FA L S E In.
PJL 3-69 Inte r vent ion req uir e d: print cartr idge m i ssing 40021 Insert Print Ca r tridge FA L S E Inte r vent ion req uir e d: paper jam 40022 2xx P aper Ja m FA L S E Inte r vent ion req uir e.
PJL 3-70 Inte r vent ion req uir e d: P erf ectFinish™ m issing 40037 31 PerfectFinish Missing FA L S E Inte r vent ion req uir e d: P erf ectFinis h empty 40 037 8 7 PerfectFinish Empty FA L S E In.
PJL 3-71 Inte r vent ion req uir e d: cartridge low 40038 88 Ca r tridge Low <CMYK > FA L S E Inte r vent ion req uir e d: replace p hotoconductor k it 40038 Replace PC Kit FA L S E Inte r vent .
PJL 3-72 Operator Inte r vention - P ape r Hand ling When a Load <tr ay>, Load Manual, or Change <tray> message appears on the printer operat or panel displ a y or through MarkVision Prof ess ional, a message is returned to the host computer i ndicating the paper source and siz e f or the pr om pt.
PJL 3-73 T o deter mine which messages y our pr inter suppor ts, see “T ab le B-12: PJL Messages f or P aper Handling” on page B-23. T able 3-15: PJL Messages for P aper Handling Printer State Sta.
PJL 3-74 T able 3-16: T ray Co des X V alue Tr a y 0 Multipu r pose F eeder 1 Ma nual Feed 2T r a y 1 3T r a y 2 4 Env elope F eeder 5T r a y 3 6T r a y 4 7T r a y 5 T able 3-17: Media Size Codes YY V.
PJL 3-75 Operator Inter vention - P a per Jams When a <#> Paper Jam message appears on the printer operat or panel displa y or through MarkVision Prof essional, a message is r e turned to the host computer indicating t he type and location f or the prompt.
PJL 3-76 T o deter mine which messages your printer suppor ts, see T able B-13 on page B-24. T able 3-19: PJL Messages for P aper Jams Printer State St at us C ode Display Str ing* Online Statu s Inte.
PJL 3-77 Inte r vent ion req uir e d: paper jam 4232 x 232 Paper Jam FA L S E Inte r vent ion req uir e d: paper jam 4233 x 233 Paper Jam FA L S E Inte r vent ion req uir e d: paper jam 4234 x 234 Pap.
PJL 3-78 Inte r vent ion req uir e d: paper jam 4253 w 253 P aper Ja m FA L S E Inte r vent ion req uir e d: paper jam 4254 wy 254 P aper Ja m FA L S E Inte r vent ion req uir e d: paper jam 4255 255 .
PJL 3-79 Inte r vent ion req uir e d: paper jam 4281 w 281 Paper Jam FA L S E Inte r vent ion req uir e d: paper jam 4281 x 281 Paper Jam FA L S E Inte r vent ion req uir e d: paper jam 4282 w 282 Pap.
PJL 3-80 Service Error s Error Code 50000 is returned fo r all 9xx Ser vice Errors when the printer can return a status c ode. T o deter mine whether y our printer suppor ts returning ser vice messages , see “T able B-14: Service Errors” on page B-29.
PJL 3-81 Syntax: @PJL R DYMSG DIS PLAY = " message "[<CR>]<L F> OPMSG Command When an OPMSG command is received, the message appear s and is allotted both lines of the displ ay .
PJL 3-82 Unique PJL Commands T o determine which commands y our printer s uppor ts, see “T able B-16: Le xmark Unique PJL Commands” on page B- 29. LBEEP Command This command causes the printer to beep three ti mes .
PJL 3-83 LPR INT Comma nds (Inf orm ation P ages) Use these commands to print one of the internal inf or mation pages . @PJL t estpa ge[< CR>]< LF> The suppor ted testpa ge values are listed in the f ollowing tab le.
PJL 3-84 PORT parameter The f ollowing ports are valid par ameters fo r LESC APECHAR: • INA • INA1 • INA2 • INA3 • LOCAL T ALK1 • LOCAL T ALK2 • LOCAL T ALK3 • P ARALLEL • P ARALLEL1.
PJL 3-85 LF AX PHONENUMBER Comma nd This command t ells the printer t hat the output r esulting from the current job is being sent to th e f ax processin g de vice instead of to the printer .
PJL 3-86 LDO WNL O ADT ARGET Command This command specifies whic h de vice is the target f or downloaded fil es. The target can be RAM, flash, or disk.
PJL 3-87 T able 3-22 lists the par ameters used with most of the commands. Addi tional parameter s are noted in the description of each command. T able 3-22: V ariab les for Flash and Disk File and P .
PJL 3-88 filede vice DEVICE = filedevi ce File stor age media. Cas e insensitiv e. flash flash 1 disk disk1 rom The rom value is used f or the LR UNFIL E command o n ly . Note: The co mmand is i gnored if the de vice i s not installed . flashd evic e DEVICE = flashd evice File st orage media .
PJL 3-89 Note: If P os tScript emul ation is used to create the file on the de vice , it may automaticall y attach a .data extens ion to the fna me . See “Filename Extensions” on page 6-10 f or more inf or mation.
PJL 3-90 LREADFILE Command Use this command to read data fr om a file on a storage de vice . Syntax: @PJL L READF ILE DEVIC E = file devic e FILEN AME = " fname " [START = lo cati on ] [ LEN.
PJL 3-91 L WRITEFILE Com mand Use this command to write data to a file on a storage de vice . Syntax: @PJL L WRITE FILE DEVI CE = filede vice FILEN AME = " fn ame " [START = lo cati on ] [ L.
PJL 3-92 LRENAMEFILE Command Use this command to rename a fil e on a storage de vice. The command is ignored if the filen ame spec if ied as OLDFILENAME doesn’t exi st on the devi ce , or if the filename specif ied as NEWFILENAME alread y e xists on the de vic e.
PJL 3-93 File an d Devi ce Pro tection Commands The f ollowing inf ormation applies to pass word pro tection. • Y ou can set bot h read/write and write pass words for a resource. If both pass words are set, the read/ wr ite pass word has precedence o ver the w rite pass word.
PJL 3-94 Syntax: @PJL D EFAUL T LR ESOUR CE:" devi ce:fi lena me.f ilety pe " LRWLOC K=" pa sswo rd "[< CR>] <LF> @PJL D EFAUL T LR ESOUR CE:" devi ce:fi lena me.
PJL 3-95 Unloc k ing a Protected File or D evice Use the LDECLARE command to speci f y a pass word so a pr otected file or de vice ma y be accessed or “u nloc ke d.” The LDECLARE command is only allo wed within a JOB/ EOJ combination. LR WLOCK with LDECLARE specified unloc ks a file or de vice f or reading and writing.
PJL 3-96 Re-Locking a Pr otected File or Device Use the LDELETEP ASSWORD command to re-loc k a pass word- protected file or de vice that has been unloc ked using the LDECLARE command. If an LRESOURCE is not specified, all unloc ked fil es or de vices are re-loc ked.
PJL 3-97 Unloc k in g a Protected File or D evice f or the Current Job The file or de vice unloc ked b y the ex ecution of this comman d is auto m atically re-loc ked upon e x ecution of the EOJ command or by a printer la nguage change . Syntax: @PJL L DECLA RE L RESOU RCE : " d evice :fil enam e.
PJL 3-98 Reco vering Lost P assw o r d s Use the LQ UER YSEED and LBYP ASSP ASSWORD commands t o recov er lost pass words . Syntax: @PJL L QUERY SEED [<CR> ]<LF > @PJL L BYPAS SPAS SWORD K.
Po s t S c r i p t 4-1 CHAPTER 4: P ostScript Em ulation This section e xplains P ostScript emulation supplement al operators in detail . For more inf orm ation, re fer t o the P ostScr ipt Language Ref erence Man ual (Third Edi t ion) by Adobe Systems , Inc.
Po s t S c r i p t 4-2 Using Y our Software Program T o select P ostScript emulati on, use the ENTER LANGU AGE comman d, whic h is a Printer Job Language (PJL) command. See “ENTER LANGU AGE Command” on page 3-3. See “Printer Job Language” on page 3- 1 f or syntax and use of PJL.
Po s t S c r i p t 4-3 Page F ormatting The printab le are as and logical pages f or P ostScript e mul ation, both por trait and landscape orientati on, are illustr ated below .
Po s t S c r i p t 4-4 Logical P ag e Size See the f ollowi ng t ables f or the logical page size dimensio ns your printer supports. If inf orm ation about y our printer is not in clu ded in the f ollowi ng tab les, s ee page 1-1 f or inf orm ation on ho w to get a T echnical Ref erence f or your pr int er .
Po s t S c r i p t 4-5 Lexma rk X422 The f ollow ing tab le lists t he e xact width and l ength of the p rintab l e areas f or all pape r and env elope siz es the Lexmark X422 pr inter suppor ts. Areas A through F i n the tab le are described in the Legend under “Printab le Areas” on page 4-3.
Po s t S c r i p t 4-6 Lexma rk E230, E232, E234(n) , E330, E332n The f ollow ing tab le lists t he e xact width and l ength of the p rintab l e areas f or all pape r and env elope siz es the Le xmar k E230, E232, E234(n), E330, and E332 printers suppor t.
Po s t S c r i p t 4-7 P ostScript Em ulation Fonts f or the Lex mark X422 The Le xmar k X422 printer has 91 resident f onts in P ostScript emulation .
Po s t S c r i p t 4-8 P ostScript emu lat i on also has a backw ar d compatibility mode that changes the metrics of eight of t he r esident f onts to match the f onts in the Le xmark Optra S f amily of printer s. The eight fon t s are: Note: In ba ckwar d compatibility mode, the Let terGothic-BoldSlant ed f ont is unav ailab le.
Po s t S c r i p t 4-9 P os tSc rip t Emulation Fon t s fo r th e Lexmark C5 10 (n ) The Le xmar k C510(n) printer has 158 resident f onts in P ostScript emulati on. The f onts match the 136 Adobe P ostSc r ipt 3 resident f onts and include 22 e xtra f onts.
Po s t S c r i p t 4-10 GoldSerifMM Bod oni-Bold Univ ers-Extended Bod oni-BoldItalic LetterGot hic-BoldSlanted Jo annaMT Marigold Jo annaMT -Italic Ne wCenturySchlbk-Roma n JoannaMT -Bold Ne wCentury.
Po s t S c r i p t 4-11 P ostScript emu lat i on also has a backw ar d compatibility mode that changes the metrics of eight of t he r esident f onts to match the f onts in the Le xmark Optra S f amily of printer s. The eight fon t s are: Note: In ba ckwar d compatibility mode, the Let terGothic-BoldSlant ed f ont is unav ailab le.
Po s t S c r i p t 4-12 P ostScript Em ulation Fonts f or the Le xma rk E234 (n) , E330, E332 n The Le xmark E234(n), E330, and E332n printers hav e 91resident f ont s in P ostScr ipt emulati on. Since the f onts are designed to mat ch Adobe P ostScript 3, this is calle d f orwar d compatibili ty mode .
Po s t S c r i p t 4-13 P ostScript emu lat i on also has a backw ar d compatibility mode that changes the metrics of 8 of the resident font s to match the fonts in the Le xmark Optra S f amily of printers . The 8 f onts are: Note: In ba ckwar d compatibility mode, the Let terGothic-BoldSlant ed f ont is unav ailab le.
Po s t S c r i p t 4-14 Back ward compat ibility: With the appropriate printer driv er installed and selected, y our softw are program enumer ates and selects the av ailab le P ostScript f onts. Supple ment al Operator s This section e xplains P os tScript emul ation supplemental oper ator s in detail.
Po s t S c r i p t 4-15 nameof op erator — nameofoperator variab le Brief description of the command function. Description of variables . Error: bold font P aper Size Su ppor t The oper ators in t his section rel ate to the paper used in the pr inter .
Po s t S c r i p t 4-16 T able 4-7: Paper Sizes Supported ✓ Supported ✘ Not Supp or ted Pap e r S i z e s Printer Mode l Literal Name Size (mm) Size (inch es) Size (points) C510(n ) X422 E23x E33x letter 215.9 x 279.4 8.5 x 11.0 612 x 7 92 ✓✓✓ legal 2 2 15.
Po s t S c r i p t 4-17 currentuniver salsize — currentuniversalsize integer inte ger integ er ( strin g) queries the c urrent settings for the Univ ersal paper siz e.
Po s t S c r i p t 4-18 setuniver salsize — integer int eger inte ger (str ing) setuniversalsize changes the c urrent settings f or the Univ ersal paper size .
Po s t S c r i p t 4-19 • If the requested media si ze is not f ound by the pre vious search, the f ollo wing search order i s used: –T r a y 1 –T r a y 2 –T r a y 3 – Multipurpose F eeder .
Po s t S c r i p t 4-20 T able 4-8: Tray Selecte d with T ray Operat ors ✓ Supported ✘ Not Supp or ted Printer Model Operato r T ray Se lected (Corresponding im age size is set) C510(n ) X422 E23x.
Po s t S c r i p t 4-21 manualf eed /manualfeed boolea n def in statusdict indicate s if a manual f eed source has been select ed. The boolean v alue can be: true pr ints from a manua l feed source (def ault) false pr ints from an automatic f eed source This boolean k ey can be redefined to aff ect manual f eed for the current job .
Po s t S c r i p t 4-22 setp ap er tray intege r setpapertray — changes the activ e paper source f or the ne xt page through the end of job by setting t he P ageSize entry in the page de vice to the size loaded in the selected source and b y setting MediaP osition to the sel ect ed source.
Po s t S c r i p t 4-23 En velope Size Support The litera l names in T ab l e 4-9 are also supported as operators in user dict. These operat ors change the image size , but do not change the acti v e paper source . Theref ore, when these oper ators are used, par t of the image ma y be clipped.
Po s t S c r i p t 4-24 The litera l names in T abl e 4-10 are suppor ted as P ostScript emula tion compatib le operat ors. Note: Duple xing is not suppor ted on any env elope siz e.
Po s t S c r i p t 4-25 En velope T ray Suppor t If manualfeed in statusdict and the ManualFeed page de vice paramet er are fals e when the printer recei ves one of the en velopetr ay operat ors listed in “T able 4-11: En velopetr ay Oper ator Selections” on page 4-26, the printer : • Sets the P ageSiz e P olicy to 0.
Po s t S c r i p t 4-26 T able 4-11: En velopetra y Operator Selections ✓ Supported ✘ Not Supp or ted Tr a y O p e r a t o r s Printer Model Operato r T ray Se lected (Correspo nding image size is.
Po s t S c r i p t 4-27 Supplementa l Operato r Summar y T o deter mine which operator s y our printer suppor ts, see T able C-1 on page C-1. appletalktype — appletalktype (strin g) in statusdict , this st r ing reflects the cur rent value of the LocalT alkT ype de vice parameter from the %Local T alk% de vi ce .
Po s t S c r i p t 4-28 chec kpassw or d intege r checkpassword or (strin g) checkpassword chec ks the pass words f or both the SystemP aramsP assw ord system parameter and the StartJobPass wor d system parameter stored i n the printer . If t he in tege r fo rm is used, the integer is con ver ted into a string bef ore the pass word chec k occurs.
Po s t S c r i p t 4-29 defaulttimeouts — defaulttimeouts job man ualfe ed w ait queries the u ser def ault settin gs of all timeouts. Thr ee integers are retur ned on the stac k: • JobTimeout syst em param eter 0 disab led (def ault) 15...6 5535 seconds • ManualFeedTi m eout page d evice par ameter 0 disab led 1.
Po s t S c r i p t 4-30 devcontr ol string inte ger devcontrol bo olea n allows a host computer utility to manage resources on the flash or disk. It requires a st ring de vice name paramete r , an integer command name par ameter , and two command argument par ameters.
Po s t S c r i p t 4-31 Errors: i nv alidaccess, rangechec k, typec heck devdismount device devdismount — dismounts the specified de vice b y setting the Mounted de vice par ameter f or the specifi ed dev ice to false . This oper ator is in systemdict .
Po s t S c r i p t 4-32 devf orall proc s cratc hstr ing devforall — e xecut es the specified proc procedure f or each st orage de vice after pus hing a substring on the stac k that is the por tion of the scratch st r ing containing the de vice name.
Po s t S c r i p t 4-33 devmount device devmount bool ean sets the Mounted de vice par ameter f or the specifie d de vice to true . It also returns the v alue of the Mounted de vice par ameter f or the spe cifi ed de vice . This operat or is in systemdict .
Po s t S c r i p t 4-34 mounte d true , if the de vice is mounted. This v alue is the same as the Mounted de vice parameter from the speci f ied IODevi ce . remova ble true , if the de vice is remov abl e and must be mounted befor e it is ref erenced.
Po s t S c r i p t 4-35 diskstatus — diskstatus free l ogicals ize returns on the stack the f ollowing t wo i ntegers: • Number of pages t hat are free on the optional di sk. The v alue of the Free de vice parameter from the %disk 1% IODe vice. • T otal number of pages (1024 b ytes) that are on the optional disk .
Po s t S c r i p t 4-36 dojamreco very — dojamrecovery boolea n queries the user default setting of the Jam Reco very menu item. A boolean v alue is returned on the stack: true reprint jammed page (.
Po s t S c r i p t 4-37 dostartp age — dostartpage boolea n returns a boolean with the same val ue as the system parameter DoStartP age . The DoStartP age system parameter must be pres ent for the compati bi lity operat or dostar tpage to be present.
Po s t S c r i p t 4-38 duplexmode — duplexmode boolea n queries the c urrent v alue f or the Duple x page de vice par ameter . true pr inting mode is duple x false pr inting mode is simplex Note: F or printers that do not support duplex ing , this val ue is alwa ys false .
Po s t S c r i p t 4-39 file filena me access file file creates a file obj ect wi th specified filename and access . The access v alues are: r open the f ile f or reading only w create a file if one does not already e xist, or truncate and o verwrite it if it does e xist.
Po s t S c r i p t 4-40 fir stside — firstside boolea n indicate s whether t he current imagi ng area is on the front side of the page. true front side is curr ent ly being imaged false back side is currently being imaged Error: stack overflo w f o ntnonz er owinding — boolean fontnonzerowinding sets the wi ndin g rule f or T ype 1 f o nts .
Po s t S c r i p t 4-41 ignoresi z e See page 4-17. initiali ze disk pages a ction initializedisk — initial izes the disk with the page count and acti on as integer arguments . The arguments set the (%di sk1%) IO devi ce parameters as f ollows: • LogicalSize parameter is set to pages .
Po s t S c r i p t 4-42 jobsource — jobsource (strin g) indicate s the curren t v al ue of the CurI nputDevice system par ameter . A str ing is returned on the stack indi cating the job sour ce.
Po s t S c r i p t 4-43 %LPR_B% %LPR_C% %LPR_D% %UnknownDe vice% This oper ator is equivalent to e xec uti ng the foll owing P ostScript emula tion sequence: currentsystemparams /CurInputDevice get Error: stack overflo w jobtim eo ut — jobtimeout intege r queries the c urrent user def ault setting f or the JobTimeout parameter .
Po s t S c r i p t 4-44 manualfee dtime out /manualfeedtimeout inte ger def is an integer k ey in statusdict t hat works with the ManualFeedTimeout p age de vice parameter to determine the manualf eed timeout f or a giv en page.
Po s t S c r i p t 4-45 pagesprinted - pagesprinted queries the number of pages of the current job submit ted by the P ostScri pt inter pre ter t o th e p r inter .
Po s t S c r i p t 4-46 PS2fonts - PS2fonts redefines the f ollowing P ostScript resident fonts to match the character desi gns and metrics defined in P ost Scr ipt Le vel 2. The f ont names in parentheses are the equiv alent P ostScript 3 f ont names f or the associated P os tScript Le vel 2 names.
Po s t S c r i p t 4-47 Note: Some printer models releas ed in the year 2000 or later designa ted as Energ y Star printers cannot ha ve P o wer Sav er disab l ed.
Po s t S c r i p t 4-48 resolution — resolution intege r queries the r esolution f or the current print job . An in teger is retur ned on th e stac k: 300 300 dpi is set to On 600 600 dpi is set to .
Po s t S c r i p t 4-49 sccbatc h channe l sccbatch baud optio n returns the user def ault settings f or serial communication par ameters. channe l has the fol lowing v alid integer val ues: 9 25 If only one serial inter f ace por t is av ailab l e on the printer , both 9 and 25 retur n the same v alues .
Po s t S c r i p t 4-50 sccinteract ive channe l sccinteractive baud opti ons provi ded f or parsing compat ibility purposes. A val ue of 0 is returned. Errors: i nv alidaccess, rangechec k, stac ko verflow , st ackunderflo w, typechec k setco verpage boolea n setcoverpage — specifi es a cov er page f or a f a x jo b.
Po s t S c r i p t 4-51 setdoidlef on ts boolea n setdoidlefonts — is parsed and discarded. A boolean v al ue is required. Errors: st ac kunderflo w , typec heck setdojamreco very boolea n setdojamrecovery — changes the user def ault set ti ng of th e Jam Recovery menu item.
Po s t S c r i p t 4-52 setdoret intege r setdoret — changes the PQET setting f or the ne xt page through the end of the print job . The integer v alues allo wed are: 0 turn PQ ET Off 1 turn PQ ET O.
Po s t S c r i p t 4-53 setdosysstart boolea n setdosysstart — modifies the v alue of the Star tupMode sy ste m pa rame ter . true Star tupMode set to 1 false Star tupMode set t o 0 (def ault) •I f true , the printer e x ecutes a Sys/Star t file from flash or d i sk when the P ostSc ript emu lation inter preter is ini ti alized.
Po s t S c r i p t 4-54 setenginesync boolea n setenginesync — changes the se tt ing that i ndicat es whether the p rinter w ai ts f or the last p age of a job to print bef ore returning a Ctrl-D to the host computer .
Po s t S c r i p t 4-55 setfile posit ion file p ositi on setfileposition mov es the read pointer in an open file to the ne w specified fil e po sit ion. This is defined as t he number o f b ytes from the sta r t of the file . The ne x t read oper ati on star ts at the ne w file posi tion.
Po s t S c r i p t 4-56 setjobtimeout intege r setjobtimeout — changes the v a lue of the JobTimeout user paramet er f or the ne xt page through the end of the print job . V alid integers are: 0 disab led 15...6 5355 seconds The v alue r eturns to the JobTimeout sys tem parameter setting at t he end of the pr in t jo b.
Po s t S c r i p t 4-57 setprinternam e string setprintername — changes the Printer Name system parameter to the v alue of the stri ng . The string v al ue can be any string up to 32 charac ters.
Po s t S c r i p t 4-58 setresoluti o n intege r setresolution — changes the re sol ution for t he current print job and disca rds unpr inted data. Ref er to y our printer user documentation f or a l ist of supported resolutions .
Po s t S c r i p t 4-59 setsccinter active channe l bau d op tions setsccinteractive suppor ts compatibil ity with the IBM LaserPrinters 4019, 4029, an d 4039.
Po s t S c r i p t 4-60 setuser diskper cent intege r setuserdiskpercent — remov es an i nteger from t he stack and discards it. Errors: st ac kunderflo w , rangech eck, in val i daccess, typec heck softwareiomode — softwareiomode 0 suppor ts compatibil ity with the IBM LaserPrinters 4019, 4029, an d 4039.
Po s t S c r i p t 4-61 user diskpercent — userdiskpercent 0 retu r ns a 0 (zero) on the stac k. Errors: st ac ko verflow , in v alidaccess waitt imeout — waittimeout intege r queries the c urrent v alue f or the W aitTi m eout user parameter . An integer is returned on the stack: 0 disab led 15.
Po s t S c r i p t 4-62 P age Device P aramete rs In additi on to the page de vice pa rameters de scribed in Sectio n 4.11 of the Po s t S c r i p t Language Ref erence Manual (Thir d Edition) b y Adobe Systems , Inc., the f ollowing page de vice parameters are used b y setpagedevic e and currentpagedev ice .
Po s t S c r i p t 4-63 De viceRendering Info (contin ued) dictiona r y T one rS aver is a boolean that controls the T oner Sav er f eature. T rue Starts the printer to ner sav er mechan ism F alse St.
Po s t S c r i p t 4-64 De viceRendering Info (contin ued) dictiona r y AutoM ediaT ype is a boolean that control s the MediaT ype entries in the InputAttrib utes dictionary in the p agede vice dictionary . T rue Me diaT ype entries in the InputAttrib utes dictionari es cannot be modif i ed by the user .
Po s t S c r i p t 4-65 De viceRendering Info (contin ued) dictiona r y Ty p e is a constan t value . T o find the v alue of T ype for y our printer , see T able C-2 on page C-4. ColorCorrection is a null, str ing, or name object that controls the appearanc e of color s.
Po s t S c r i p t 4-66 ImagingB Box arra y or null D e fines a rectang le that lies w ithin the bounda ri es of the page specified b y P ageSize . Im ag ing BBox m a y be eit her a v alue of n ul l o r a n a r r a y of f our num be r s. A va lue of nul l indicates the bounding bo x is the largest ima geable a rea possib le f or a giv en page size.
Po s t S c r i p t 4-67 InputAttrib utes (contin ued) dictiona r y Mode is a k ey with in the InputAttrib utes dictionary , and it s valu e is a name that determines the mapping of t he phy sical inpu t sources to the input sourc es listed in InputAtt r ibute s.
Po s t S c r i p t 4-68 Manua lF eed boolean Indicates if the current (or activ e) sou rce is a m anual s ource . The f oll owing v alu es are suppo r ted: T r u e Manual feed F alse A utomatic feed I.
Po s t S c r i p t 4-69 NupDetai ls dicti onar y Describes the specific a c tions perf ormed when the N-up function is activ e. Rows is a n integer that spec ifies the n umber o f ro ws to print on a por trait-ori ented page. Columns is an inte ger that spec ifies the num ber of colum ns to print on a p or trait- oriented p age.
Po s t S c r i p t 4-70 NupD eta ils (contin ued) dictiona r y Border specifies the type of b o rder to dra w around th e individual Nup pages. Supported val ues are: 0 No bord er 1 A solid b lack line Order is an integer tha t specifies ho w the Nup pages are place d on the printed page.
Po s t S c r i p t 4-71 OutputAttrib utes dictiona r y Contains i nformation abo ut the output b in targets. Th ere is a nu m eric ke y , which is a dic tionar y , f or each ins talled output bi n. OutputT ype and O utputLocation are the allo wab le ke ys in eac h output dictio nar y .
Po s t S c r i p t 4-72 P ageSize arra y Specif ies the siz e [width heigh t] of the current pa ge in 1/72 in ch units. A v alue o f [0 0] is as sumed to b e the lo wer lef t corner of the ph y sical page an d [width h eight] is the up per right corner .
Po s t S c r i p t 4-73 P ostRend er ingEnhan ce Details di ctionary Describes enhan cements tha t are made to the output after the page has be en held in memo r y . REV alue is an int eger that spec ifies the curren t value o f the PQET menu i tem . Supported val ues are: 0 PQET is Off .
Po s t S c r i p t 4-74 SlipSheetDe tails dictionary Specif ies the f ollowing two uniqu e separato r sheet param eters: SlipSheetSo urce and T ype . SlipSheetSourc e is an intege r type paramet er which ident ifies the sourc e used fo r separ ator sheets .
Po s t S c r i p t 4-75 T umble boolean Indicates th e orientation of t he second side of a duple xed page with res pect to the first s ide. Supported v alues are: T rue Caus es pages to print a s if .
Po s t S c r i p t 4-76 Interpreter P a rameter s This section describes the P ostScript emulation interpreter parameters . There are three types of i nter preter parameters: • Use r pa ra m e te rs.
Po s t S c r i p t 4-77 Halfton eMode intege r Aff ects th e results of su bsequent hal ftone setting op erators suc h as setscreen , setcolo rscreen , and setha lftone . The HalftoneMo de parameter has no eff ect on the curren t halftone . Legal v alues: 0 Nor mal mo de of opera tion.
Po s t S c r i p t 4-78 MaxOpS tac k integer Ma xi mum elem en ts in t he ope ra nd sta c k. Legal v alue: An y integer g reater than or e qual to 75. MaxP atternItem intege r Maxi mum by tes occupie d by a sin gle cached pat ter n. Legal v alue: An y integer betw een zero and half of Ra mSize.
Po s t S c r i p t 4-79 System P arameters The setsystemparams oper ator sets the v alues of the specified system par ameters . This oper ator r equires a pa ss w ord if one is s et. The curr entsystemparams operator returns a dictionary of the current v alues of the system par amet ers.
Po s t S c r i p t 4-80 CurInput Devic e st r ing (Read-only ) The name of the communi cations de vice correspon ding to the curre nt input file f or the P ostScript em ulation progr am which is cu rrent ly e x ec uti ng .
Po s t S c r i p t 4-81 DoPrintErrors boolean Speci fies whether to prin t an error page usi ng a built-i n error handler w hen a P ostScript em ulation error occurs. Tr u e Print PS Error user def ault v alue is s et to On. Fa l s e Print PS Error user def ault v alue i s set to Off .
Po s t S c r i p t 4-82 Installe dRam integer (Read-on ly) Indicated, i n bytes , the total am ount of installe d printer memory (RAM) in the s ystem. Note: Installed Ram should n ot be confus ed with RamSiz e which is the amount of memory (RAM) av ailab le to the f or matting inte r preters and the gr aphics eng ine.
Po s t S c r i p t 4-83 MaxSourc eList integer (Read-on ly) See T able C-4 on pag e C-9 f or the def ault v alue of your printer . MaxUP athCa che integer Maxim um bytes occupied b y the user p ath cache . Legal v alue: An y non-nega tiv e integer . P ageCount integer (Rea d-only) T otal n umber of pages t hat hav e been p r inted.
Po s t S c r i p t 4-84 SystemP aramsP ass word string (Write-only) Control s the ability of se tsystemparams to change the v alues of s ystem param eters and setdevpa rams to chang e the v a lues of de vice param e ters. Legal v alue: An y integer or s tr ing of 32 or fe wer non-n ull char acters .
Po s t S c r i p t 4-85 Device P aram eters The current devparams operato r retur ns a dictionary of the current v alues of the system paramet ers. The setde vparams operator sets the v alues of the s pecified de vice par ameters. • This opera tor requires a pass w ord if one is set.
Po s t S c r i p t 4-86 T able 4-17: P ostScript Em ul ation Device P arameters Key Ty p e Definition Device Parameter s for the Com munication Device %P arallel%, %P arallelA%, % Parallel B %, %P ara.
Po s t S c r i p t 4-87 PSSmar tSwitch boolean Suppor ted val ues are: T rue PS SmartSwitch is set to On. F alse PS Smar tSwitch is set to Off. Fo r more inf or mation, se e “Using SmartSwitch” on pa ge 4-1. T ype name (Read-on ly) Alwa ys returns the v alue of /C ommunica tions.
Po s t S c r i p t 4-88 Interpreter name (Read-on ly) Supported val ues are: Po s t S c r i p t Au to S e l e c t PCL PPDS On boole an Designate s if the comm unication cha nnel is On and able to receive a nd send data. Supported val ues are: T rue Data is sent and processed.
Po s t S c r i p t 4-89 StopBits integer (R e ad-only ) Supported val ues are: 1 2 T ype name (Read-on ly) Alwa ys returns the v alue of /C ommunica tions.
Po s t S c r i p t 4-90 PCLSmartSwitch boolean Suppor ted v alues are: T rue PCL Sm ar tSwitch i s On. F alse PCL Smar tSwitch is Off. Fo r more inf or mation, se e “Using SmartSwitch” on pa ge 2-1. P or tLocation string (Read-on ly) Designates t he phy sical location o f the por t related to the p arameter se t.
Po s t S c r i p t 4-91 Filtering name Indicate s if the input ne eds fur ther filtering b efore the data can be c orrectly proces sed. Supported val ues are: In ter p re ter Ba se d None HasNam es boole an (Read-only ) Alwa ys returns F alse .
Po s t S c r i p t 4-92 Enab led boolean (Rea d-only) Supported val ues are: Tr u e Fa l s e Filtering name Indicate s if the input ne eds fur ther filtering b efore the data can be c orrectly proces sed. Supported val ues are: In ter p re ter Ba se d None HasNam es boole an (Read-only ) Alwa ys returns F alse .
Po s t S c r i p t 4-93 Enab led boolean (Rea d-only) Supported val ues are: Tr u e Fa l s e Filtering name Indicate s if the input ne eds fur ther filtering b efore the data can be c orrectly proces sed. Supported val ues are: In ter p re ter Ba se d None HasNam es boole an (Read-only ) Alwa ys returns F alse .
Po s t S c r i p t 4-94 Dela y e dOutp utClose boolean Selects ho w the printer manag es the p ort at the end of eac h print job . Supported v alues are: T rue An e nd-of-file me ssage is not s ent until the current job and all preced ing jobs finish p r inting.
Po s t S c r i p t 4-95 T okenT alkT ype string Setting thi s variab le does not affect the va lue of other ph ysical in ter nal print serve rs. Note: The sta tusdict str ing appletalktype is correct fo r the current job p or t. T ype name (Read-on ly) Alwa ys returns the v alue of /C ommunica tions.
Po s t S c r i p t 4-96 Dev ice Para meters f or the Commu nication De vice %RemotePrin ter%, %RemotePri nterA%, %Remote PrinterB%, %Rem oteP rin te rC%, %Rem ot ePri n te rD% (%Remo tePr inter_NV% a .
Po s t S c r i p t 4-97 Devi ce P arameter s for the Com munication Device %PrintSe r ver%, %PrintSer verA%, %PrintServerB%, %PrintServerC%, %PrintServerD% (%PrintServer_N V% and %PrintServer_P ending% co ntain the same parameters) Dela y e dOutp utClose boolean Selects ho w the printer manag es the p ort at the end of eac h print job .
Po s t S c r i p t 4-98 Dev ice P arameter s for the Com munication Device %LPR% , %LPR_A%, %LPR_ B%, %LPR_C% , %LPR_D% (%LPR_NV % and %LPR_P ending% contai n the same par ameters) Enab led boolean (R.
Po s t S c r i p t 4-99 HasNam es boole an (Read-only ) Alwa ys returns F alse . Inte r p rete r nam e (Re ad-o nly) Supported val ues are: Po s t S c r i p t Au to S e l e c t PCL PPDS On boole an Designate s if the comm unication cha nnel is On and able to receive a nd send data.
Po s t S c r i p t 4-100 Dev ice Para meters f or the Pa rameters De vice %Ethern etPhysical %, %EthernetPh ysicalA%, %Ether netPhysicalB %, %Ethernet PhysicalC%, %EthernetPhy sicalD% Eth er net Ad dres s s tr in g (Re ad- onl y) On boole an Designate s if the comm unication cha nnel is On and able to receive a nd send data.
Po s t S c r i p t 4-101 Darkness real Print Da rkness and T oner Saver Settin g Designate s the print darkness and toner sa ver s etting (model s pecific).
Po s t S c r i p t 4-102 P a geC o unt i nte ger ( Read -o nly) Page C o unt TimeT oStandby integer P ower Sa ver . Suppo r ted value s are: 0 to 120, in minutes T ype name (Read-on ly) Alwa ys returns the v alue of /P ar ameters.
Po s t S c r i p t 4-103 Initializ eAction integer Speci fies an acti on for ini tializing th e disk. Supported va lues are: 0 Indica tes no ac t ion ; th e value r et ur ned when the para met er i s rea d .
Po s t S c r i p t 4-104 HasNam es boolean (Read-only ) Ind ic ate s if the flash par ameter is onl y v alid when fl ash i s mounted (mou nted is set to T r ue).
Po s t S c r i p t 4-105 Devic e Parame ters for t he I ODevic e %rom % BlockS ize i nteg er (Re ad- onl y) F ree in teger (Rea d-only) Indi cates the am ount (in pag es) of free spa ce av ailab le in R OM. V alid only if the ROM is mounted (mounted is set to T rue).
Po s t S c r i p t 4-106 Status and Err or Messa g es Printers return P ostScript emulatio n error messages and status inf or mation to the computer t hrough any activ e interf ace. T o send i nformation to t he computer through the par allel inter face , configure the interf ace as bi directional.
Po s t S c r i p t 4-107 Status Messages Y our pr inter responds to a Ctrl-T (x'14') stat us quer y on an interf ace by sendi ng a one-line status message bac k to the host computer o ver the same interf ace .
Po s t S c r i p t 4-108 Unsolicited Messages Y ou m a y receive unsol icited messages from your printer . Unsolicited messages use the same sy ntax as status messages. These m essages are tr ansmitted sequenti ally as ordinary data through the communicat ion channel, with other char acters written to a standar d output file .
Langua g es 5-1 CHAPTER 5: Switching Languag es Y our pr inter ma y support both PCL emulation and P ostScript emulat ion. Ref er to y our printer document ation f or more inf orm ation. This chapt er describes w ays to s witch printer languages and e xplains when y ou ma y want to choos e one method ov er another .
Langua g es 5-2 Setting Smar tSwitch f or Different Interfaces Y ou can customiz e y our pr inter so t hat par ticula r print jobs ar e sent to par ticular interf aces . For e xample , y ou may w ant to send all P ostScript emulati on job s to the network inter face and all PCL emulati on jo bs to the par allel interf ace.
Langua g es 5-3 Sniffing Sniffin g is : • Enabled when any End- of- Job point occurs. • Disab led when a SIC or PJL comm and within a v alid pr inter la nguage is receiv ed. The printer e xamines the recei ved data str eam , attempts to d eter mine the type of data stream, a nd automaticall y s witches to the pr oper language .
Memory 6-1 CHAPTER 6: Flash Memor y and Disk Flash memor y and disk de vices are used to store permanent f onts, macros , and symbol sets . The disk de vi ce is also used to buff er print jobs, collate large jobs , and store j ob statistics .
Memory 6-2 Resour ce Data Collection (Do wnload T a r g et) Use the Resource Data Collecti on (Download T arget) mode to sa ve the f ollo wi ng inf orm ation to flash memory or disk: • P ermanent bi.
Memory 6-3 Storing Resou r ces on Flash Mem ory o r Disk Complete the f ollo wing steps to downlo ad resources to flash memory or disk using the printer operator panel, MarkVision Pro fessional , or a PJL command. 1 Set the download target to flash memory or disk.
Memory 6-4 Example of Directory The Directory that prints appears simil ar to the one below . An e xplanation of the par ts of the Director y f ollows the e xample. Optional Font Memory Expression used t o indi cat e flash memor y or disk is insta ll ed.
Memory 6-5 Pa r t N u m b e r P ar t Number as it is stored in the flash memory card header . If the flash memor y is f or matted by the printer , the par t number field is sho wn as ( none ). The par t number field f or the disk is not printed. Write Pass w or d Protecte d Indicate s the entire f l ash memor y or disk i s write-protected.
Memory 6-6 Type File types that can be stor ed on flash memor y or disk ha ve unique e xtensions . The f ollowi ng file types ar e recogniz ed by the flash f or mat used on ea r lier printer model s; the name of the file type printed in t he director y appears i n parenthesis.
Memory 6-7 Description The description field for f onts comes from the f ont header . The descripti on fi eld fo r macros or symbol s ets is b lank unless the descript ion fi el d in the fi le header is s et b y the PJL LRESOURCE command. See “Pr inter Unique L R ESOURCE V ar i ables” on page 3-52.
Memory 6-8 By using pass words , administrato rs can ensure data integ r ity and proper authorization. I f flash memor y is write pass word protected, f or ex ample, users cann ot delete e xisting f i les , format the de vice , or download ne w files to the de vice (wit hout first specifyi ng the pass wor d).
Memory 6-9 Accessing File s with P o stScript Em ulation File Naming Co n ventions F or any P ostScript em ul ation operator that re quir es a filena me par ameter , the filename can be one of the follo wing: %device%filename Specific all y ref erences a file on a pa r ticular de vice .
Memory 6-10 De vice names are case sensitiv e. The y must appear e xactly as sho wn. Each de v ice (e xcept the dis k) has one synon ym. F or e x ample , the flash memory can be ref erred to as %fla sh% or %flash1%. The name with the 1 is a uni que identifier .
Memory 6-11 The v alue of t his operator adds the e xtension .data to all filenames ref erenced when using P ostScript emulat ion file operators . T o pre v ent the .data e xtension from being added, issue the f ollo wing P ostScript emulati on command : statusdict begin false setfilenameextend end T o add the .
Memory 6-12 Device Sear ch Or der If y ou are using the P ostScript emulat ion oper ators run, file, r enam efile, status or eex ec , y ou do not need to speci f y the de vice. If you omit th e device name , de vices are searche d in t he def ault order : disk and then fl ash memory .
Memory 6-13 Note: Do not lea ve the R OM devi ce unmounted . All inter nal f onts are contained on the R OM devi ce. In the pre vious e xamples, the devmount , devdismount oper ators must be used outside t he ser ver loop .
Memory 6-14 F or minimum ac ceptable job buff ering perf or mance, th e hard disk should be abl e to read and write files at a sustained rat e of 600Kb/sec. The Le xmark hard disk option suppor ts this requi rement . Some adv antages of job buff ering include: • The printer accepts print jobs more quic kly .
Memory 6-15 Disabling Job Buffering When you disab le job b uf fering, it tak es eff ect immediately on the por t you disab led. A POR is automatically p erfo r med when job b uff ering is di sabled f or any port from the printer operator panel or throu gh MarkVision Prof essional, so the unused memor y resources can be real l ocated.
Specifications 7-1 CHAPTER 7: Printer Specifications This chapter lis ts pr inter specificat ions and inf or mation about hardware , envi ronmental conditions , and power requi rement s. Airflow Requirement Room should meet ASHRAE 62–1989 standards .
Specifications 7-2 Electrical Specification s W arning: Le xmark recommends tha t you do not use v oltage con v er ters with printers . Po wer Requ irements The f ollowing tab les list the nominal a ver age power req uirements (including f user po wer).
Specifications 7-3 Idle with P o wer Sav er 12 W 1 2 W 12 W 22 W 2 22 W 2 6 W6 W6 W Rated sho r t term current 8 .1 A 7.2 A 2.83 A 8.8 A 4.1 A 8.6 A 7 .
Specifications 7-4 Physical Specifications Clearance Requireme nts T able 7-4: Printer Phy sical Specifications Dimension Printer Model C510, C51 0n C510dtn X422 Height 385 m m (15.2 in.) 590 mm (23.2 in.) 539.75 mm (2 1.25 in.) Width 49 5 mm (19.5 in.
Specifications 7-5 En vir onmental C onditions Note: When shi pping or storing printers , alw ays p ack the printer supplies (car tridges and photocond uctors, f or e xample) separ ately .
Specifications 7-6 P ower On to R eady State Time P eriod After y o u turn the pr inter on, it per f or ms cer tain inter nal diagnost ics and prepar es f or printing. The f ollo wing table list s the appro xi m ate time it tak es f or your printer to perf or m the internal diagnostics and ent er the Ready state .
Interface s 8-1 CHAPTER 8: Printer Interfaces Interf aces connect your pr inter to other d evic es, such a s a computer . The Le xmark C510 has a standard para llel connector (also ref erred to as a Centro nics -type interf ace) and/or a USB connector .
Interface s 8-2 Setting Up the Comm unications P or t Y ou must estab lish communication between y our pr inter and computer . T o do this, y ou define y our commun i cations por t in the appli cation you are using. Instr uctions f or se ver al applications or oper ating systems are as f ollows .
Interface s 8-3 11 Click OK. 12 Close all windo ws now that the por t is set up . Setting Up t he Communications P o r t Us ing Wi ndows NT 4.0 In yo ur Windows NT 4.0 application: 1 On the Menu bar , click Start. 2 Click Settings. 3 Clic k Control P anel.
Interface s 8-4 Setting Up the Communications P o r t Using Windows 2000 In y our Windo w s 2000 applicat ion: 1 On the Menu bar , click Start. 2 Click Settings. 3 Clic k Control P anel. The Control P anel scr een displa ys. 4 Doubl e-clic k the System icon .
Interface s 8-5 Setting Up t he Communications P or t U sing Wi ndows XP In y our Windo w s XP applic ation: 1 On the Menu bar , click Start. 2 Clic k Control P anel. The Control P anel scr een displa ys. 3 Switch t he Control P anel to Classic Vie w .
Interface s 8-6 Decidi ng Which Interface to Use On some printers , y ou can attach multiple interf ace cab les to the printer at the same time . The printer automati cal ly s witches t o the inter f ace recei vin g a job . Then it prints the job and begins search in g the interf aces f or the ne xt job .
Interface s 8-7 P arall el Inte rfa ce Use the Le xmark 3.04 m (10 ft) paral lel cable par t number 13 29605, Le xmar k 6.1 m (20 ft) parallel cab le par t number 1427498, or a cab le t hat is IEEE 1284 c ompliant, t o connect y our printer t o a personal comp uter or to a hos t system with a Centronics- compatib le paralle l por t.
Interface s 8-8 Standard P arallel Connector The standar d IEEE 1284-B compliant parallel connector on the printer is a 36- pin D-shell f emale receptacle , as shown.
Interface s 8-9 • T o prev ent line noise , the cabl es shoul d be shielded and connected to the chassis of bot h the computer and the printer . The par allel cab le leng th should not e xceed 3.04 m (10 ft), unless a Le xmar k 6.1 m (20 ft) parallel cab le is used.
Interface s 8-10 18 N/A VCC 300 mA o f 5 V +/ - 5% N/A 1 8 HOST LOGIC HIGH In Dr iven b y the host. 19–30 19–35 GND Return These pins are gro unded signa ls used as twisted pai rs with the data and control signals .
Interface s 8-11 Using the INIT * Signal to In itializ e When the printer is using the par allel interf ace and it receiv es an INIT* signal, i t initi al izes as f ollows (unl ess INIT* is disabl ed by a v ar iab le def ault settin g): • It prints data receiv ed bef ore INIT* , and then init ialize s.
Interface s 8-12 The f ollowing il l ustration sho ws the pin assignments f or connecting the 25-pin connector to th e 36-pin connecto r . The symbol * indicates an activ e low signal.
Interface s 8-13 • Controls data flo w control with BUSY and A CKNLG* signals. Does not carry out data tr ansf er by ignoring the BUSY or A CKNLG* signal. (The syste m can carry out data transf er t o the printer only when t he le v el of the B USY si gnal i s low and aft er confir ming the A CKNLG* signal i s high.
Interface s 8-14 The f ollowing il l ustration sho ws the pin assignments f or connecting the 25-pin connector to th e 36-pin connecto r . The symbol * indicates an activ e low signal.
Interface s 8-15 • Controls data flo w control with BUSY and A CKNLG* signals. Does not carry out data tr ansf er by ignoring the BUSY or A CKNLG* signal. (The syste m can carry out data transf er t o the printer only when t he le v el of the B USY si gnal i s low and aft er confir ming the A CKNLG* signal i s high.
Interface s 8-16 T able 8-2 sho ws all protocol timings in nanos econds. Fastb ytes Protocol Data T ransfer Sequence Y our printer is eq uipped with Fa s t b y t e s protocol, whi ch is an enhanced parallel interf ace protocol. F astb ytes protoc ol may give y ou a f aster data t ransf er time on some personal computers and operat ing systems.
Interface s 8-17 T able 8-3 sho ws all protocol timings in nanos econds Prin ter -to-C omputer Co mm unicati on (Ad v anced Sta tus) The printer has a standard IEEE 1284-B compliant connect or and is an IEEE 1284-I compliant de vice.
Interface s 8-18 The printer also suppor ts a De vice ID f unction. When queried for its ID , the printer returns the f ol lowing inf or mation: • Manuf acturer • Command set • Model of pr inter The LEXP ARAL.EXE file is av ailabl e from ftp .lexmark.
Interface s 8-19 P arallel Mode 2 P arall el Mode 2 is a f eature av ailable for man y Le xmark printers. The fac tor y def ault setting i s On . The timing required by the printer is clearly indicated i n “Standard Prot ocol Data T ransf er Sequence” on page 8-15.
Interface s 8-20 STR OBE Receiver f or the Le xmark E230, E 232, E330, E332n, and E234(n) The f ollowi ng diagr am illustrates the STROBE r eceiver f or th e Lexmark E230, E232, E330, E332n, and E234(n). A UT OFD* Receiver for the Lexmar k C51 0 The f ollowi ng diagr am illustrates the A UT OFD* receiv er f or the Le xmark C510.
Interface s 8-21 A UT OFD* Receiver f or the Le xmark E230, E232, E330, E332n, and E234(n) The f ollowi ng d iagr a m illust rat es the A U T OFD* receiv er f or the Le xmark E230, E232, E330, E332n, and E234(n).
Interface s 8-22 D A T A 1-8 Si g nal Driver/R eceivers f or the Le xmark E2 30, E232, E33 0, E332n, and E234(n) The f ollowing diag ram illustr a tes each of the D A T A 1-8 signal driv er/receiv ers f or the Le xmar k E230, E232, E330, E332n, and E234(n).
Interface s 8-23 A CKNLG*, ERR OR*, SLCT, PE Driver s for the Le xmark E230, E232, E330 , E332n, and E234(n) The f ollowing diag ram illustra tes the A CKNLG*, ERROR*, SLCT , PE dr iv ers for the Le xmar k E230, E232, E330, E332n, and E234(n).
Interface s 8-24 BUSY Dri ver and INIT* Receiver f or the Lexmark E230, E23 2, E330, E332n, and E234(n) The f ollowi ng diagr am illustrates the BUSY driv er and the INIT* receiv er f or the Le xmar k E230, E232, E330, E332n, and E234(n).
Interface s 8-25 SLCTIN* Receiver f or the Lexmark E230, E232, E330, E332n, and E234(n) The f ollowing diag ram illustra tes the SLCTIN* receiv er for the Le xmar k E230, E232, E330, E332n, and E234(n). Serial Interface The serial interf ace allows dat a t o flo w bac k and f or th between the comput er and the printer .
Interface s 8-26 When using t he serial interf ace, your p r inter has t he foll owing di fferenc es from the serial interf ace on some other printers: • The printer returns XON/XOFF with 2 stop bits in all cases . • The printer does not suppor t DTR inv ersion.
Interface s 8-27 4 RTS Out Request to Send. Th e printer sets th is signal high and the signal re mains high while the print er is on. 5 CTS In Clear to Send. T his pin is opt ionally use d for ser ial dat a flow cont rol prot oco l when in se r i al mo de.
Interface s 8-28 Using an IBM-Compatib l e Pe r sonal Computer with Serial In ter face RS-232C Note: These i nstr uctions are f or con necting the printer to an IBM-compatib le personal computer usi ng a dual asynchronous adapter or an e xternal print ser v er .
Interface s 8-29 Serial Comm uni cation P arameter s (RS-232 C) The f ollowing par ag raphs show acce ptable v alues f or serial communication parameter s. V oltage Level R ange The maximum v oltage le vel f or contro l l ines or data lines is +/- 25 posi tive V dc and +/- 25 negativ e V dc.
Interface s 8-30 Star t and Stop Bits The printer rec eiv es data with 1 st ar t bit and either 1 o r 2 stop bits . The printer alw a ys sends 1 star t and 2 s top bits. Pa r i t y There are f our possib le par ity setting s: Odd, Even, None , and Ignore.
Interface s 8-31 Data Flow Contr ol Data flo w contr ol is accomplished through the f ollowi ng lines: • Data Set Rea dy (DSR) • Data T erm inal Ready (DTR) Fiv e data flo w control prot ocols are.
Interface s 8-32 Pr otocol (RS-232C) T able 8-5 shows the state or functi on of each ser ial interf ace sig nal i n the three data flo w control protoc ols when the Honor DSR setting is On. T able 8-6 sho ws the st ate of each se rial interf ace si gnal i n the three dat a flo w control protocol s when the Honor DSR setting is Off .
Interface s 8-33 DTR and DTR/DSR Pr otocol Timing (RS-232C) Use DTR to pace the data flow fro m the computer . DTR goes from high to lo w to indicat e to the computer that the pr inter cannot re ceive.
Interface s 8-34 XON/XOFF Protocol Timing (RS-232C) When you selec t this data flow contr ol protocol , the printe r sends an XOFF signal when it detects the f ollowing B USY conditions: • Buffer full • Attendance err or • Printer not in ready state The f ollowing diag ram illustra tes XON/XOFF P rotocol Timing.
Interface s 8-35 Seri al Err or s The printer places an u nders core char acte r in t he link b uff er when it det ect s an er ror . Some printers also displa y serial error s on the printer oper ator.
Interface s 8-36 Window s 95/98/Me/2000, Windo ws NT 4.0, and Windo ws XP: F or correct oper ati on of the RS-232C serial interf ace, while set ti ng up y our communi cat ions por t, make sure y ou selected Hardwar e in the Flow Contr ol field. Selectin g Hardware s ets the communi cation to DTR protocol .
Interface s 8-37 Serial Cable Pin Assignments (RS-422) The RS-422 serial cab le appears as fol lows: Pin assignments f or this 25-pin connec tor are shown in T able 8-7. Y ou can set the polarity of t hese signals fr om the printer operato r panel or thr ough Mar kVision Prof essional.
Interface s 8-38 Serial Comm uni cation P arameter s (RS-422 ) The f ollowing par ag raphs show acce ptable v alues f or serial communication parameter s. Vo l t a g e L e v e l RS-422 serial inter f ace uses a diff erenti al pair , 5-volt typical delta, 0.
Interface s 8-39 Pa r i t y There are f our possib le par ity setting s: Odd, Even, None , and Ignore. Odd The por t e xpects to receive data frames wit h an odd number of logical 1 ’ s per b yte . T he printer transmi ts XOFF and XON with odd p arity .
Interface s 8-40 XON/XOFF Protocol Timing (RS-422) When you selec t this data flow contr ol protocol , y our printer sends an XOFF signal when it detects the f ollowing B USY conditions: • Buffer fu.
Interface s 8-41 Serial Computer Configuration Recommendatio ns (RS-422) F or correct oper ati on of the RS-422 serial interf ace, mak e sure you ha ve: • Install ed an RS-422 adapt er card in your host comp uter . • Set up t he IRQ according to the RS-422 documentati on that you received with th e RS-422 adapter ca rd.
Interface s 8-42 Window s 95/98/Me/2000, Windo ws NT 4.0, and Windo ws XP: F or correct oper ati on of the RS-422 serial interf ace, while set ti ng up yo ur communi cations por t, make sure y ou hav e selected Xon/Xoff in t he Flow Control fi eld. Selectin g Xon/Xoff sets t he communicati on to Xon/Xoff protocol .
Interface s 8-43 Note: Netw or k capabilities are stand ard on some printer models. Ref er to y our printer user documentati on f or more inf or mation. Input Buff er Y our pr inter has an input (l ink) buff er for each interf ace. The maximum siz e of the input bu f fer depends upon the amount of RAM memor y installed.
PCL Suppor t A-1 APPENDIX A: PCL Suppor t T able A-1 lists PCL em ulation commands and identif i es pr inters that support them. F or detailed inf or mation about PCL emulati on commands and how t o select them, see “ PCL Emul ation ” on page 2-1.
PCL Suppor t A-2 ESC &f#F Set Univ ersal Heigh t 2-64 ✓✓ ✓ ESC &f#G Set Univ ersal W idth 2-64 ✓✓✓ ESC &f#O Set Univ ersal F eed Dire ction 2-65 ✓✓✓ ESC &f#W Set Univ.
PCL Suppor t A-3 ESC &p#C P alette Control 2-8 0 ✓✓✓ ESC &p#I P ale tte Contro l ID 2-80 ✓✓✓ ESC &p#S Select P alette 2-80 ✓✓ ✓ ESC &p#X[d ata ] T ransparent Print Da.
PCL Suppor t A-4 ESC *b #M Set Raste r Compression Mode 2-78 ✓✓ ✓ ESC *b #V[data] T ransf er Raster Da ta (by Plane) 2-77 ✓✓✓ ESC *b #W[data] T ransf er Raster Data ( by Row / Block) 2-78 .
PCL Suppor t A-5 ESC *p #P Push / P op P alett e 2-80 ✓✓✓ ESC *p #R Set P attern Refere nce P oint 2-75 ✓✓✓ ESC *p #X Horizontal Curso r P ositi on (in PCL Units) 2-68 ✓✓✓ ESC *p #Y .
PCL Suppor t A-6 T able A-2 lists GL/2 comman ds and ident ifies the printers that suppor t them. ESC *v#T Select Current P attern 2-74 ✓✓ ✓ ESC *v#W[ data] Configure Imag e Data 2-81 ✓✓✓ .
PCL Suppor t A-7 CO C ommen t 2-84 ✓✓✓ CP C harac ter Plot 2-86 ✓✓✓ CR Color Ran ge 2 -87 ✓✓✓ DF Def ault 2-8 4 ✓✓ ✓ DI Absolute Direction 2-86 ✓✓ ✓ DR Relative Direction.
PCL Suppor t A-8 LM Label Mode 2-86 ✘✘✘ MC Logical Op eration 2-85 ✓✓✓ NP Num ber of P e ns 2- 87 ✓✓ ✓ P A Plot Absolute 2-85 ✓✓✓ PC Pe n Color 2-87 ✓✓✓ PD P en Down 2-85.
PCL Suppor t A-9 TD T ransparent Data 2-86 ✓✓✓ TM Thres hol d Mat r ix 2-87 ✓✓ ✓ TR T ransparenc y Mo de 2-8 7 ✓✓✓ UL User Defined Line 2-87 ✓✓✓ WG Fill W edge 2-86 ✓✓✓ W.
PJL Support B-1 APPENDIX B: PJL Suppor t The f ollowing tab les list PJL commands and identi fy pr inters that supp or t them. F or detailed i nformation about PJL commands, se e “ Pr inter Job Lan guage ” on page 3-1. All commands ma y not hav e a full description .
PJL Support B-2 HOLDTYPE 3-14 ✓✓ ✘ IMA GEAD APT 3-14 ✘✘✘ INTRA Y1 ✘✘✘ INTRA Y2 3-14 ✓✓ ✘ INTRA Y3 3-14 ✘✘✘ INTRA Y4 3-14 ✘✘✘ INTRA Y5 3-14 ✘✘✘ INTRA Y1SIZE 3-.
PJL Support B-3 PERSONALITY 3-17 ✓✓✓ PO WERSA VE 3-17 ✓✓✓ PO WERSA VETIME 3-18 ✓✓✓ PRINTQU ALITY ✘✘✘ QTY 3-18 ✓✓ ✘ RENDERMODE ✘✘✘ REPRINT 3-18 ✓✓✓ RESOLUTION .
PJL Support B-4 LBLANKP A GES 3-19 ✓✓✓ LBONDLENGTH 3-19 ✘✘✘ LBONDLOADING 3-19 ✓✓ ✘ LBONDOUTBIN 3-20 ✘✘✘ LBONDTEXTURE 3-20 ✘✓ ✓ LBONDWEIGHT 3-20 ✓✓✓ LBWLOCK 3-20 ✓.
PJL Support B-5 LCUST OMTYPE1OUTBIN 3-24 ✘✘✘ LCUST OMTYPE1TEXTURE 3-24 ✘✓ ✓ LCUST OMTYPE1WEIGHT 3-24 ✓✓✓ LCUST OMTYPE2LENGTH 3-24 ✘✘✘ LCUST OMTYPE2LOADING 3-24 ✓✓✓ LCUST .
PJL Support B-6 LCUST OMTYPE5TEXTURE 3-28 ✘✓ ✓ LCUST OMTYPE5WEIGHT 3-29 ✘✓ ✓ LCUST OMTYPE6LENGTH 3-29 ✘✘✘ LCUST OMTYPE6LOADING 3-29 ✘✓✘ LCUST OMTYPE6MEDIA 3-29 ✘✓ ✓ LCUST.
PJL Support B-7 LHONOR INIT 3- 32 ✓✘✓ LIMA GEBRIGHTNESS 3-32 ✓✘✘ LIMAGECONTRAST 3-32 ✓✘ ✘ LIMAGEENHANCE 3-32 ✘✓ ✓ LIMA GEENHANCETYPE 3-33 ✘ 2 ✓ LIMAGEORIENT A TION 3- 33 .
PJL Support B-8 LMANU ALENVELOPESIZE 3-36 ✘✓ ✓ LMANU ALENVELOPETYPE 3-36 ✘✓ ✓ LMANU ALP APERSIZE 3-36 ✘✓ ✓ LMANU ALP APERTYPE 3-3 6 ✘✓✓ LMAXST A T USMSG ✘✘✘ LMPFEEDERP AP.
PJL Support B-9 LPLAINOUTBIN 3-4 0 ✘✘✘ LPLAINTEXTURE 3-4 0 ✘✓✓ LPLAINWEIGHT 3-4 0 ✓✓✓ LPO WERSA VER 3-40 ✓✓✓ LPPDS 3-41 ✘✓ ✓ LPPDSFORMLINES 3-41 ✘✓ ✓ LPPDSLINESPERI.
PJL Support B-10 LST APLETESTBIN 3-44 ✘✘✘ LST APLETESTSOURCE 3-44 ✘✘✘ LSTR OKEWIDTH 3-44 ✘✘✘ LSUBSTITUTESIZE 3-44 ALLLISTE D ALLLISTED ALL LISTED L THINCOA T 3 -44 ✘✘✘ LT O P B.
PJL Support B-11 L TRA Y5P APER TYPE 3-47 ✘✘✘ L TRA Y1RENUMBER 3-47 ✓✓✓ L TYPE1FONTS 3-47 ✓✓✓ LUSDEF A UL TS 3-47 ✓✓✓ T able B-3: Comm on V ariab l es for PCL Emulat i on ✓ Supported Printer Model ✘ Not Supp or ted P a ge num ber s re fere nce var ia ble des cr ip ti ons.
PJL Support B-12 LASSIGNMPFEEDER 3-49 ✘✓✘ LASSIGNTRA Y1 3-50 ✓✓✓ LASSIGNTRA Y2 3-50 ✓✓✓ LASSIGNTRA Y3 3-50 ✘✘✘ LASSIGNTRA Y4 3-50 ✘✘✘ LASSIGNTRA Y5 3-50 ✘✘✘ LBITMAP.
PJL Support B-13 T able B-7: Printer Unique LRESOURCE V ariabl es ✓ Supported Printer Model ✘ Not Supp or ted P a ge num ber s re fere nce var ia ble des cr ip ti ons.
PJL Support B-14 T able B-10: PJL Messages for A uto-Contin uable Conditions ✓ Supported Printer Mode l ✘ Not Supp or ted P a ge num ber s re ference m es sage des cr ipti ons.
PJL Support B-15 Interventio n Required - P arallel P or t Error 3-64 30018 56 P arallel Po r t x Dis abled ✓✘ ✘ Interventio n Required - Standard U SB Disabled 3-64 30018 56 Standard USB P or t.
PJL Support B-16 Interventio n Required - Insuffic ient Collation Area 3-65 30076 3 7 In s u f fic ie nt C o ll a t io n A r ea ✘✘ ✘ Interventio n Required - Empty Hole Pun ch Box 3-65 30107 Emp.
PJL Support B-17 Inte r vent ion req uir e d: Disk Corrupt ed. Refo r mat? 3-66 32015 Disk Corrup ted. Reformat? ✓✘ ✘ Interventio n Required - T oo Many Flash Opt i ons Install ed 3-66 32030 58 .
PJL Support B-18 T able B-11: PJL M essages f or Attendance Conditions ✓ Supported Printer Mode l ✘ Not Supp or ted P a ge num ber s re ference m es sage des cr ipti ons.
PJL Support B-19 Interventio n Required - Unsupported Printhead 3-68 40021 32 Unsu ppor ted Printhea d ✘✘ ✘ Interventio n Required - T ra y Size Sense Error 3-68 40021 4 0 T r ay x Size Sense Er.
PJL Support B-20 Interventio n Required - Inst all T ray x or Ca nc el Jo b 3-69 40027 Install T ray x or Cancel Job ✘✘ ✘ Interventio n Required - Reat tach Envelope Feeder 3-69 40028 Reatta ch .
PJL Support B-21 Interventio n Required - T o ner Low 3 -70 40038 88 T oner Low ✘✓ ✓ Interventio n Required - T o ner Low 3 -70 40038 88 Y ellow T oner Low 88 Ma genta T oner Lo w 88 Cyan T oner.
PJL Support B-22 Interventio n Required - Replac e Oil Coatin g Roll 3-71 40038 Replace Oil Coating Roll ✘✘ ✘ Interventio n Required - Car tridge Empty 3-71 40039 89 Cartr idge Empt y <CMYK> ✘✘ ✘ Interventio n Required - Load Staples 3 -71 40040 Load Stap les ✘✘ ✘ Interventio n Required - Priming F aile d.
PJL Support B-23 T able B-12: PJL M essages f or Paper Handli ng ✓ Supported Printer Mode l ✘ Not Supp or ted P a ge num ber s re ference m es sage des cr ipti ons.
PJL Support B-24 Interventio n Required - Inse r t Dup lex P age s & Pr es s Go. 3-73 412yy Insert Dup lex P age s & Pr ess Go. ✘✘ ✘ Interventio n Required - Inser t T ray Req uest 3-73 .
PJL Support B-25 Interventio n Required - Pa p e r J a m 3-76 4208x ✘✘✘ Interventio n Required - Pa p e r J a m 3-76 4209x ✘✘✘ Interventio n Required - Pa p e r J a m 3-76 4210x ✘✘✘ .
PJL Support B-26 Interventio n Required - Pa p e r J a m 3-77 4245w ✘✘✘ Interventio n Required - Pa p e r J a m 3-77 4246w ✘✘✘ Interventio n Required - Pa p e r J a m 3-77 4247wy ✘✘✘.
PJL Support B-27 Interventio n Required - Pa p e r J a m 3-78 4260 w ✘✘✘ Interventio n Required - Pa p e r J a m 3-78 4260 x ✘✘✘ Interventio n Required - Pa p e r J a m 3-78 4261w ✘✘.
PJL Support B-28 Interventio n Required - Pa p e r J a m 3-79 4284 x ✘✘✘ Interventio n Required - Pa p e r J a m 3-79 4285 w ✘✘✘ Interventio n Required - Pa p e r J a m 3-79 4286 w ✘✘.
PJL Support B-29 T able B-14: Service Error s ✓ Supported Printer Mode l ✘ Not Supp or ted P a ge num ber s re ference m es sage des cr ipti on. C510(n) X422 E230, E232, E234(n), E330, E332n Messa.
PJL Support B-30 LF AX PHONENUMBER 3-85 ✓✓✓ LOPENFILE 3-8 9 ✓✓✓ LCLOSEFILE 3-89 ✓✓✓ LREADFILE 3-9 0 ✓✓✓ L WRITEFI LE 3-91 ✓✓✓ LR UNFILE 3-91 ✓✓✓ LRENAMEFILE 3-92 .
P ostScript Suppor t C-1 APPENDIX C: P ostScript Suppor t The f oll owing t ab les list P ost Script commands and identi fy printers that sup por t them. F or detailed information about P ostScript emulation, see “ P ostScript Emul ation ” on page 4-1.
P ostScript Suppor t C-2 dostartpage 4-37 ✓✓ ✓ dosyss tar t 4-37 ✓✓ ✓ duple x er 4-37 ✓✓ ✓ duple xmode 4-3 8 ✓✓ ✓ engines ync 4-38 ✓✓ ✓ file 4-39 ✓✓ ✓ file nam efor.
P ostScript Suppor t C-3 reso lut ion 4 -48 ✓✓ ✓ revision 4-48 ✓✓ ✓ sccbatc h 4-49 ✓✓ ✓ sccinte ractiv e 4-50 ✓✓ ✓ setco verpage 4-50 ✓✓ ✓ setdef aulttim eouts 4-50 ✓.
P ostScript Suppor t C-4 setuser diskperce nt 4-60 ✓✓ ✓ softw areiomode 4-6 0 ✓✓ ✓ tumb le 4-60 ✓✓ ✓ userdisk percent 4-61 ✓✓ ✓ waittim eout 4-61 ✓✓ ✓ T able C-2: Page Devi ce Parameter s ✓ Supported Pri n ter Model ✘ Not Supp or ted P a ge num ber s re fere nce p aram eter desc r ipti ons.
P ostScript Suppor t C-5 • Substitut eSize 4-64 ✓✓ ✓ • T ype 4-65 102 98 98 • ColorCorrect ion 4-65 ✓✘ ✘ • ImageBrightne ss 4-65 0 ✘✘ • ImageC ontrast 4-65 0 ✘✘ • Print.
P ostScript Suppor t C-6 MediaCol or 4-68 ✓✓ ✓ MediaP osition 4-68 null null null MediaT ype 4-68 ✓✓ ✓ MediaW eight 4-68 ✓✓ ✓ NumCopi es 4-68 ✓✓ ✓ Nup 4-68 ✓✓ ✓ NupD eta .
P ostScript Suppor t C-7 P a geS ize 4 -72 ✓✓ ✓ P olici es 4-72 ✓✓ ✓ • P olicyNot Found 4-72 11 1 • P oli cyRe por t 4 -72 {pop} {pop} {pop} • P ageSize 4-72 00 0 P ostRend er ingEnh.
P ostScript Suppor t C-8 T able C-3: User Interpreter P arameter s ✓ Supported Printer Model ✘ Not Supp or ted P a ge num ber s re fere nce p aram eter desc r ipti ons.
P ostScript Suppor t C-9 T able C-4: S ystem Interpre ter Paramet ers ✓ Supported Printer Model ✘ Not Supp or ted P a ge num ber s re fere nce p aram eter desc r ipti ons.
P ostScript Suppor t C-10 language lev el 4-82 33 3 Max Displ ayList 4-82 InstalledRam MaxF ontCache 4-8 2 Installe dRam MaxF ormCache 4-82 101000 101000 101000 MaxIma geBuffe r 4-82 InstalledRam MaxO.
P ostScript Suppor t C-11 T able C-5: Devices Supported ✓ Supported ✘ Not Supp or ted n Netw or k v ersion of the p r inter mode l Printer Model C510 C510n X422 E230, E232 E234 E234n E330 E332n De.
P ostScript Suppor t C-12 %AppSoc ketC% 4-79 ✘✘✘✘ ✘✘✘✘✘ %AppSoc ketD% ✘ ✘✘✘✘✘ ✘✘✘ %Rem ote Pr int er A% ✘✓ ✓✘✘✘✘✘✘ %Rem ote Pr int er B% ✓ ✓ .
P ostScript Suppor t C-13 T able C-6: Device P ar ameters ✓ Supported Printer Mode l ✘ Not Supp or ted P a ge num ber s re fere nce p aram eter desc r ipti ons.
P ostScript Suppor t C-14 PSSmar tSwitch 4-88 ✓✓ ✓ Rob u stXon 4-88 ✓✓✓ SerialMode 4-88 ✓✓✓ StopBits 4-89 ✓✓✓ T ype 4-89 ✓✓✓ Dev ice Para meters f or the Commu nication D.
P ostScript Suppor t C-15 P or tLo cat ion 4-9 1 ✓✓✓ PSSmar tSwitch 4-91 ✓✓ ✓ T ype 4-91 ✓✓✓ Device P arameters f or the Communication De vice %IR%, %IR_A%, %IR_B%, %IR_C%, %IR_D% De.
P ostScript Suppor t C-16 Filtering 4-94 ✓✓ ✓ HasNam es 4-94 ✓✓ ✓ Interpreter 4-94 ✓✓✓ NodeID 4-94 ✓✓ ✓ On 4-94 ✓✓ ✓ PCLSmar tSwitch 4-94 ✓✓✓ P or tLo cat ion 4-9 4.
P ostScript Suppor t C-17 Devic e Parame ters for t he Co mmuni cat ion D evic e %Ap pSocke t%, %App So cketA% , %Ap pS ocketB %, %AppSoc ketC%, %AppSock etD% Dela yedO utputClose 4-95 ✓✓ ✓ Enab.
P ostScript Suppor t C-18 Dev ice P arameter s for the Com munication Device %LPR% , %LPR_A%, %LPR_ B%, %LPR_C% , %LPR_D% Enab led 4-98 ✓✓✓ Filtering 4-98 ✓✓ ✓ HasNam es 4-98 ✓✓ ✓ In.
P ostScript Suppor t C-19 Dev ice Para meters f or the Commu nication Devi ce %T okenRingPh ysical%, %T okenRingPh ysicalA%, %T okenRingPh ys ica lB%, %T okenR in gPh ysicalC%, %T okenRing Ph y sic al.
P ostScript Suppor t C-20 Devic e Parame ters for t he Param ete rs Device %di sk1 % BlockS ize 4- 102 ✓✓✓ F ree 4-102 ✓✓ ✓ HasNam es 4-102 ✓✓✓ Initializ eAction 4-10 3 ✓✓✓ Log.
P ostScript Suppor t C-21 Devic e Parame ters for t he Param ete rs Device %rom% BlockS ize 4- 105 ✓✓✓ F ree 4-105 ✓✓ ✓ HasNam es 4-105 ✓✓✓ Initializ eAction 4-10 5 ✓✓✓ Logical.
Inde x X-1 Inde x A airflo w requirement 7-1 altitude speci fi cations 7-5 atmospheric pressure 7-5 attendance messages (PJL) 3-63, 3-67, 3-72, 3-75 B bib liogr aphy 1-5 C clear ance requirements 7-4 .
Inde x X-2 color e xtensions 2-80 cursor p ositioning 2-68 f ont creation 2-73 f ont selection 2-70 job control 2-62 macros 2-73 miscellaneous commands 2-83 page contr ol 2-64 picture fr ame 2-83 prin.
Inde x X-3 J job b uff er ing 6-13 creating a par tition 6-14 disabling 6-1 5 enablin g 6-1 4 reco vering from a powe r loss 6-15 L language s witch ing PCL emulation MarkVision Prof essional 2-1 oper.
Inde x X-4 de vice 4-85 syste m 4-79 user 4-76 page de vice 4-62 pass word 6-7 directory of flash memor y or disk 6 -6 general notes 3- 93 loc king entire f l ash or disk 3-94 lost fi le or de vice pa.
Inde x X-5 Univ ersal Exit Language 2-63 macros macro contr ol 2-73 macro ID 2-73 miscellaneous commands displa y functions off 2-84 displa y functions on 2-83 end-of-li ne wrap 2-83 paper typ e 2-84 .
Inde x X-6 MarkVision Prof essional 2-1 operat or panel 2-1 Smar tSwitch 2-1 softw are prog ram 2-2 Smar tSwitch 2-1 specialt y fonts 2-31, 2-42 standard fonts 2-10, 2-20, 2-30, 2-38 T ype 1 f onts 2-.
Inde x X-7 pagecount 4-44 pagesprinted 4-45 paper tra y 4-45 printer name 4-45 product 4-45 PS2f onts 4-46 PS3f onts 4-46 quiet 4-46 ram si ze 4 - 47 realf or mat 4-47 renamefile 4- 47 resoluti on 4-4.
Inde x X-8 Check Duple x Connection 3- 71 Check Finisher Inst allation 3-69 Check Mailbox Installation 3-69 Check T ra y <source #> Connection 3-69 Close Cov er 3-68 Close Cov er <c> 3-68 .
Inde x X-9 282 P aper Jam 3-79 283 P aper Jam 3-79 284 P aper Jam 3-79 285 P aper Jam 3-79 286 P aper Jam 3-79 287 P aper Jam 3-79 288 P aper Jam 3-79 289 P aper Jam 3-79 290 P aper Jam 3-79 291 P aper Jam 3-79 292 P aper Jam 3-79 293 P aper Jam 3-79 294 P aper Jam 3-80 295 P aper Jam 3-80 Priming F ailed.
Inde x X-10 miscellaneous 3-82 status r eadback 3-53, 3-54 command syntax command codes 3-1 optional par ameters 3-2 commands COMMENT 3-3 DEF A UL T 3-8, 3-94 DINQUIRE 3-54 ECHO 3-55 ENTER LANGU AGE 3.
Inde x X-11 HOLD 3-13 HOLDKEY 3-13 HOLDTYPE 3-14 IMA GEADAPT 3-1 4 INTRA Y1SIZE 3-14 INTRA Y2 3 -14 INTRA Y2SIZE 3-14 INTRA Y3 3 -14 INTRA Y3SIZE 3-14 INTRA Y4 3 -14 INTRA Y4SIZE 3-14 INTRA Y5 3 -14 I.
Inde x X-12 LCUST OMTYPE6NAME 3-29 LCUST OMTYPE6OUTBIN 3-29 LCUST OMTYPE6TEXTURE 3-30 LCUST OMTYPE6WEIGHT 3-30 LDESCRIPTION 3-53 LDO WNLOADT ARG ET 3-30 LDR YTIMEDELA Y 3-30 LDUPLICA TEHELDJOBS 3-30 L.
Inde x X-13 LPSFONTPRIORITY 3-52 LPUNCH 3-43 LREAROUTBINNAME 3-43 LREPEA TLIMIT 3-43 LRESET 3-43 LRESOURCESA VE 3-43, B-9 LRIGHTMARGINOFFSET 3-43 LR WLOCK 3-53 LSCREENING 3-43 LSEP ARA T ORSHEETS 3-43.
Inde x X-14 po w er requirements 7-2 siz e 7-4 time to power on to Re ady st ate 7-6 time to print first page 7-6 weight 7- 4 protocol DTR/DSR 8-32 f astby tes data trans fer sequence 8-16 Robu st X O.
Inde x X-15 operat or inter ve ntion - paper jams 3-75 P ostScript emu lat i on 4-107 s witching printer la nguages MarkVision Prof essional 2-1 methods 5-1 operat or panel 2-1, 4-1 PCL emulation 2-1 .
デバイスLexmark Printerの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Lexmark Printerをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLexmark Printerの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lexmark Printerの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lexmark Printerで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lexmark Printerを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLexmark Printerの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lexmark Printerに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLexmark Printerデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
