LGメーカー19CNV42Kの使用説明書/サービス説明書
ページ先へ移動 of 50
ww w .lg.c om O WNER'S MANU AL L G CL OUD V SERIE S MONIT OR (LED MONIT OR) 19CNV42K Please r ead the safe t y inf ormation carefully bef or e using the product .
2 ENG English T able of Contents T ABLE OF CONTENTS 3 ASSEMBLING AND PREP ARING 3 Unpacking 4 Parts and buttons 5 Lifting and moving the Monitor 5 Setting Up the Monitor set 5 - Attaching the Stand Ba.
3 ENG English ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product.
4 ENG English ASSEMBLING AND PREP ARING Parts and buttons Power Indicator y LED On : Power is on y LED Off: Power is of f Front Side Buttons Input Connectors (See p.
5 ENG English ASSEMBLING AND PREP ARING Setting Up the Monitor set Attaching the Stand Base 1 Place the monitor's screen face down. y T o pr otect the screen from scratches, cover the surface with a soft cloth. 3 Using a coin, turn the screw clockwise to se- cure the stand base.
6 ENG English ASSEMBLING AND PREP ARING Adjusting the angle 1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 15° backwards for a comfortable viewing experience.
7 ENG English ASSEMBLING AND PREP ARING U s i n g t h e K e n s i n g t o n l o c k i n g device The connector for the Kensington lock is located on the rear of the monitor . For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www .
8 ENG English ASSEMBLING AND PREP ARING Detaching the stand body 1 Place the monitor's screen face down. T o protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver , remove the four screws and detach the stand from the monitor .
9 ENG English ASSEMBLING AND PREP ARING Swivel stand y Image shown may differ from your Monitor set. 1 Swivel 90 degrees and adjust the angle of the Monitor set to suit your view . 1 Lift the monitor to its highest height to utilize the Pivot function.
10 ENG English ASSEMBLING AND PREP ARING 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach W all mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.
11 ENG English ASSEMBLING AND PREP ARING y Unplug the power cord before moving or in- stalling the monitor to avoid electric shocks. y Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury .
12 ENG English USING THE MONITOR SET USING THE MONIT OR SET C o n n e c t i n g I n p u t S i g n a l C a b l e y This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer , without having to reconfigure anything or install any manual drivers.
13 ENG English USING THE MONITOR SET DVI connection T ransfers digital video signals from the Cloud Mon- itor to an extended monitor . Connect the Cloud Monitor to an extended monitor using a DVI cable. y T o connect the monitor to a computer , use the appropriate signal cable (LAN and D- SUB).
14 ENG English USING THE MONITOR SET C o n n e c t i n g L A N / P e r i p h e r a l s LAN connection Connect the router or switch to the monitor using a LAN cable as illustrated below . y The LAN cable is sold separately . y The following LAN cable type can be used: Standard: IEEE 802.
15 ENG English USING THE MONITOR SET y Peripheral devices are sold separately . y The USB ports on the left and bottom of the monitor can be used to connect the key- board, mouse, and other USB devices. y Cables with angled plugs may have clear- ance issues, use straight plugs when pos- sible.
16 ENG English USING THE MONITOR SET y What is "Self Image Adjustment"? This func- tion runs when the monitor is connected for the first time and performs automatic image adjustment for each signal (only available for analog [D-SUB input] signals) to provide an optimal screen display .
17 ENG English CUSTOMIZING SETTINGS CUST OMIZING SETTINGS 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. T o return to the upper menu or set other menu items, use the up arrow ( ) button.
18 ENG English CUSTOMIZING SETTINGS Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the " NEXT MENU " button to enter the more option settings.
19 ENG English CUSTOMIZING SETTINGS PICTURE 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Enter to PICTURE by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons.
20 ENG English CUSTOMIZING SETTINGS COLOR 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select COLOR by pressing the ► button. 4 Enter to COLOR by pressing the ▼ button.
21 ENG English CUSTOMIZING SETTINGS DISPLA Y 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select DISPLA Y by pressing the ► button. 4 Enter to DISPLA Y by pressing the ▼ button.
22 ENG English CUSTOMIZING SETTINGS OTHERS 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select OTHERS by pressing the ► button. 4 Enter to OTHERS by pressing the ▼ button.
23 ENG English CUSTOMIZING SETTINGS VOLUME 1 Press the VOL button at the bottom of the monitor to display the VOL OSD menu. 2 Press the ◄ or ► button to adjust the volume. 3 Press the button to enable or disable Mute. 4 Select EXIT to leave the OSD menu.
2 4 ENG English T roubleshooting TROUBLESHOOTING Nothing is displayed on the screen I s t he mo n it o r' s p o we r c o rd pl u gg e d i n? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator .
25 ENG English T roubleshooting The image is displayed abnormally . Does the display area appear un- centered? Pressing the AUTO button will automatically optimize the screen to the current display mode. Does the screen exhibit vertical lines? Pressing the AUTO button will automatically optimize the screen to the current display mode.
26 ENG English Product Specication PRODUCT SPECIFICA TION LCD Screen T ype 48.1 cm (19 inch) TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 48.
27 ENG English Product Specication Preset Mode Display Modes (Resolution) Horizontal Frequency (kHz) V ertical Frequency (Hz) Polarity (H/V) Remark 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1440 x 900 55.
28 ENG English Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. y Using the monitor for a prolonged period of time can cause eye fatigue. T ake a 10-minute break every hour .
29 ENG English Using CLOUD Solution U S I N G C L O U D S O L U T I O N If the network is connected and IP is being ac- quired, the message "Network connection detect- ed. Acquiring IP address …" is displayed on the Connection screen. Figure 2-3 shows the message displayed when the network is ready and the IP is being acquired.
30 ENG English Using CLOUD Solution <Figure 2-5: OSD Connect Screen (Connecting)> OSD Options Menu Selecting the Options menu will produce a list of selections. The OSD Options menu contains: y Configuration y Diagnostics y Information y User Settings Selecting one of the options will produce a settings window .
31 ENG English Using CLOUD Solution y In order to utilize the FQDN feature, a DNS server , configured properly with DHCP option 81, must be used. y Gateway The Gateway field contains the gateway IP ad- dress of the device. If DHCP is disabled, this field is required.
32 ENG English Using CLOUD Solution <Figure 2-8: IPv6 Configuration> <I Pv6 > T ab The IPv6 tab is used when the portal is connected to the network configured with the IP v6. y Enable IPv6 If you select Enable IPv6, the portal in use can be connected to the network configured with the IPv6.
33 ENG English Using CLOUD Solution <Figure 2-9: Label Configuration> Label T ab The Label tab allows the administrator or host to add customized information to the portal. y The portal label parameters can also be con- figured using the Webpage Administration Interface.
34 ENG English Using CLOUD Solution y Direct to Host Y ou can view the screen of the host PC by estab- lishing 1:1 connection between the PCI host card connected to the host PC through the entered IP address of the host PC and the portal. y DNS Name or IP Address Enter the DNS name or IP address of the host PC.
35 ENG English Using CLOUD Solution y Enable Auto-Reconnect If this option is selected, reconnection is attempted automatically when a session is disconnected or the user is logged off.
36 ENG English Using CLOUD Solution <Figure 2-15: Advanced Settings for Direct to Host + SLP Host Discovery> y Enable Auto-Reconnect If this option is selected, reconnection is attempted automatically when a session is disconnected or the user is logged off.
37 ENG English Using CLOUD Solution y Desktop Name to Select Enter the name of the pool/desktop which the user client uses upon starting a session. y Port For the default setting, leave the port field empty . When the VMware View Connection Server uses the SSL authentication, enter 443 in the Port field.
38 ENG English Using CLOUD Solution y Desktop Name to Select Enter the name of the pool/desktop which the user client uses upon starting a session. y Port For the default setting, leave the port field empty . When the VMware View Connection Server uses the SSL authentication, enter 443 in the Port field.
39 ENG English Using CLOUD Solution y Prefer GSC-IS If this option is selected, the GSC-IS interface is used when a smart card supports more than one interface. If the smart card supports only one interface, it is not used. y This setting is provided only when a smart card is used.
40 ENG English Using CLOUD Solution <Figure 2-21: Advanced Setting for View Connec- tion Server + Kiosk> <Figure 2-22: V iew Connection Server + Imprivata On e- Sign Connection Setting> y Port For the default setting, leave the port field empty .
41 ENG English Using CLOUD Solution <Figure 2-23: Advanced Settings for View Connec- tion Server + Imprivata OneSign Connection> y Remember Username If this option is selected, the username which is previously used to access the VMware View Connection Server is automatically entered in the username field.
42 ENG English Using CLOUD Solution y Language The Language field is used to set the display language of the OSD and the user level event log messages. y Keyboard Layout The Keyboard Layout field allows the administrator to modify the keyboard layout.
43 ENG English Using CLOUD Solution y Screen-Saver Timeout The Screen-Saver T imeout field allows the ad- ministrator to set a time limit for the screen saver . The time limit is defined in seconds. The maximum time is 9999 seconds. If it is set to 0 seconds, the screen saver will be turned off.
44 ENG English Using CLOUD Solution y Reset Parameters Pressing the Reset Parameters button will reset all settings and options to the factory default settings. When this button is pressed, an OSD message is displayed. This is to prompt the administrator and prevent accidental reset.
45 ENG English Using CLOUD Solution y PCoIP Packets Statistics y PCoIP Packets Sent The PCoIP Packets Sent field shows the total number of PCoIP packets sent from the portal to the host in the last active session.
46 ENG English Using CLOUD Solution y Ping Settings y Destination The IP address or FQDN to perform the ping test. y Interval The interval between the ping packets. y Packet Size The size of the ping packet. y Packets y Sent The number of ping packets sent.
47 ENG English Using CLOUD Solution User Settings Window In the User Settings window , the administrator can access the tab to select the mouse and keyboard and define the PCoIP image quality .
48 ENG English Using CLOUD Solution y Keyboard Repeat Delay The Keyboard Repeat Delay field allows the user to set the portal's keyboard repeat delay . y Keyboard Repeat Rate The Keyboard Repeat Rate field allows the user to set the portal's keyboard repeat rate.
49 ENG English Using CLOUD Solution y Display T opology T ab The Display T opology tab allows the user to specify the position and alignment of a connected second- ary monitor . y It is applicable when the VMware View Con- nection Server version is 4.
MODEL SERIAL Mak e sur e t o re ad the Saf et y Pre caution s bef ore using the pr oduct . K eep the Owner ’s Manual ( CD) in an acce ssible place f or f uture r ef erenc e. The m odel and s erial num ber of th e SET is locat ed on t he back a nd one sid e of the SET .
デバイスLG 19CNV42Kの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
LG 19CNV42Kをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLG 19CNV42Kの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。LG 19CNV42Kの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。LG 19CNV42Kで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
LG 19CNV42Kを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLG 19CNV42Kの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、LG 19CNV42Kに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLG 19CNV42Kデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。