LGメーカー24EN43VSの使用説明書/サービス説明書
ページ先へ移動 of 27
www .lg.c om O WNER’S MANU AL LED L CD MONIT OR 2 4EN43VS Please r ead this manual caref ully bef ore operating your se t and retain it for future r efer ence.
2 ENG ENGLISH T ABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREP AR- ING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 5 - Detaching the Stand Base 6 - Mount.
3 ENG ENGLISH ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may diff er from the actual product and accessories.
4 ENG ENGLISH ASSEMBLING AND PREP ARING Parts and buttons Power Indicator y L ig ht in g O n: T u rn ed o n y L ig ht in g O ff : T ur n ed o ff Connection panel (See p.
5 ENG ENGLISH ASSEMBLING AND PREP ARING Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (Power) button on the bottom switch panel to turn the power on.
Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www .
Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer , see the optional T ilt Wall Mounting Bracket Installation and Setup Guide.
Connecting to a PC y Y our Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection T ransmits analog video from your PC to the Monitor set.
y When you want to use two PC in our Monitor , please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set. y If you turn the Monitor set on while it is cold, the screen may flicker . This is normal. y Some red, green, or blue spots may appear on the screen.
CUST OMIZING SETTINGS 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. T o return to the upper menu or set other menu items, use the up arrow ( ) button.
Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the " Next Menu " button to enter the more option settings.
Picture 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons.
Color 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Color by pressing the ► button. 4 Enter to Color by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons.
Display 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Display by pressing the ► button. 4 Enter to Display by pressing the ▼ button.
Others 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Others by pressing the ► button. 4 Enter to Others by pressing the ▼ button.
MY KEY Setting 1 Press MY KEY button on the bottom of the Monitor set to display the MY KEY OSD. 2 Set the options by pressing the ◄or►or▼buttons. 3 Select EXIT to leave the OSD menu. MY KEY Description MY KEY Setting MY KEY is short key . Y ou can select one of FUNC.
FUNC. Setting Picture Mode 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Enter to Picture Mode by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► buttons. 4 Select EXIT to leave the OSD menu.T o return to the upper menu or set other menu items, use the up arrow( )button.
y TOT AL POWER REDUCTION : How much power is saved while using the monitor . y TOT AL CO2 REDUCTION : Change the TOT AL POWER REDUCTION to CO2. y SA VING DA T A(W/h) 60 0 mm (2 3.6 inch) 6 W/h SUPER SA VING y Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor .
NOTE y When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD appear and user should press dual button -> User can bring back to normal mode. DUAL DISPLA Y 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC.
Each option is explained below . MY KEY Setting 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select MY KEY Setting by pressing the ► button. 3 Enter to MY KEY Setting by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons.
TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? y Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? y Press the Power button.
Display image is incorrect The screen color is mono or abnormal. y Check if the signal cable is properly connected and use a screwdriver to fasten if necessary . y Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (true color) at Control Panel ► Settings .
SPECIFICA TIONS Display Screen T ype 60.9 cm (24 inch) Flat Panel Active matrix-TFT LCDAnti- Glare coating Visible diagonal size: 60.9 cm Pixel Pitch 0.277 mm x 0.277 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) V ertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync.
Preset Modes (Resolution) Display Modes (Resolution) Horizontal Frequency(kHz) V ertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.
Proper posture for using the Monitor set. PROPER POSTURE Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright.
Mak e sur e to re ad the Saf ety Pr ecau tio ns b ef ore using the p r oduct . K eep the Own er ’s Manua l ( CD) in an acc es sible place f or futu re r ef erenc e. The mo del a nd s erial numb er o f the SET is locat ed on the back and one s ide o f the SET .
デバイスLG 24EN43VSの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
LG 24EN43VSをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLG 24EN43VSの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。LG 24EN43VSの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。LG 24EN43VSで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
LG 24EN43VSを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLG 24EN43VSの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、LG 24EN43VSに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLG 24EN43VSデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
