LGメーカー55WT30MS-Bの使用説明書/サービス説明書
ページ先へ移動 of 95
www .lg.c om O WNER’S MANU AL MONIT OR SIGNA GE 42W T30MS 4 7W T30MS 55W T30MS Please r ead this manual caref ully bef ore operating the your set and re tain it f or futur e r ef erence.
2 ENG ENGLISH T ABLE OF CONTENTS T ABLE OF CONTENTS 4 LICENSES 5 ASSEMBLING AND PREP ARING 5 Accessories 6 Optional Accessories 7 Parts and Buttons 8 Connecting the Speaker 9 Using the Mounting Cable .
3 ENG ENGLISH T ABLE OF CONTENTS 57 USING THE TOUCH SCREEN 57 T o Use the T ouch Screen on Windows 7 57 Gestures and Settings on Windows 7 58 T o Use the T ouch Screen on Windows XP 59 T ouch Response.
ENGLISH 4 LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www .lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
5 ENG ENGLISH ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may diff er from the actual product and accessories.
6 ENG ENGLISH ASSEMBLING AND PREP ARING Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may dif fer from the actual product and accessories.
7 ENG ENGLISH ASSEMBLING AND PREP ARING Parts and Buttons No. Description 1 Moves the selection up and down. 2 Adjusts the volume level. 3 Displays the current signal and mode. Press this button to adjust the screen automatically (available only in RGB mode) 4 Accesses the main menus, or saves your input and exits the menus.
8 ENG ENGLISH ASSEMBLING AND PREP ARING Connecting the Speaker - Only on some models. 1 Connect the input signal cable to the monitor before installing the speakers. Use a cable tie to organize the cables. 4 Then connect the spea ker cable. After installing your speakers, use holders and cable ties to organize the speaker cables.
9 ENG ENGLISH ASSEMBLING AND PREP ARING 42WT30MS Using the Mounting Cable T ie First, connect the input signal cable to be used.Insert the cable tie into the bottom hole on the back as shown in the figure to organize cables.
10 ENG ENGLISH ASSEMBLING AND PREP ARING Portrait Layout T o install in portrait mode, rotate the set counterclockwise 90 degrees when looking from the front. Using the IR Receiver This allows a remote control sensor to be placed in a custom location.
1 1 ENG ENGLISH ASSEMBLING AND PREP ARING Mounting on a W all For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer , see the optional T ilt Wall Mounting Bracket Installation and Setup Guide.
12 ENG ENGLISH ASSEMBLING AND PREP ARING Securing the product to a wall (optional) (Depending on model) 1 Insert and tighten the eye-bolts, or product brackets and bolts on the back of the product. - If there are bolts inserted at the eye-bolts position, remove the bolts first.
13 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly . T o replace batteries, open the battery cover , replace batteries (1.
14 ENG ENGLISH REMOTE CONTROL W .BAL Enters the White Balance menu. Nav iga tio n b uttons Scrolls through menus or options. S.MENU (SuperSign Menu Key) This button selection is not applicable. EXIT Clears all on-screen displays and returns to monitor set viewing from any menu.
15 ENG ENGLISH USING THE MONITOR USING THE MONIT OR Connecting to a PC Y our monitor supports the Plug & Play* feature. * Plug & Play: A PC will have a built-in driver for the monitor; no extra software is needed. NOTE y Connect the signal input cable and tighten it by turnin g the screw s clockwise.
16 ENG ENGLISH USING THE MONITOR DVI Connection T ransmits an digital video signal from your PC to the monitor . Connect the PC and the monitor with a DVI cable as shown the following illustration. Select DVI input. T o transmit an audio signal, connect an optional audio cable.
17 ENG ENGLISH USING THE MONITOR IR Receiver Connection Allows the use of a wired remote or IR receiver extension. y Make sure the power cable is disconnected. y Installing the IR receiver o n the front or upper part of the product may cause interference with the T OUCH IR.
18 ENG ENGLISH USING THE MONITOR Back of the product. PC T ouch USB Cable Connection Plug a USB cable into the T ouch USB port on the back of the monitor .
19 ENG ENGLISH USING THE MONITOR Adjusting the Screen Selecting an Image Mode Display images in its optimized settings by selecting one of the preset image modes. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK .
20 ENG ENGLISH USING THE MONITOR Customizing PC Display Options Customize options of each image mode for the best image quality . y This function works in the following mode: RGB [PC] mode. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK .
21 ENG ENGLISH USING THE MONITOR Customizing Sound Options Customize options of each sound mode for the best sound quality . 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to AUDIO and press OK . 3 Press the navigation buttons to scroll to Sound Mode and press OK .
22 ENG ENGLISH USING THE MONITOR y If a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty . y T o prevent image sticking, do not play a still image for more than two hours.
23 ENG ENGLISH USING THE MONITOR - 4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. - Zoom : This selection will allow you to view the picture without any alteration, while filling the entire screen.
24 ENG ENGLISH ENTERT AINMENT ENTERT AINMENT Using the Network Connecting to a Wired Network Connect the display to a local area network (LAN) via the LAN port as shown in the following illustra- tion and set up the network settings. Only supports wired network connection.
25 ENG ENGLISH ENTERT AINMENT Tips for Network setting y Use a standard LAN cable with this display . Cat5 or better with a RJ45 connector . y Many network connection problems during set up can often be fixed by re-setting the router or modem.
26 ENG ENGLISH ENTERT AINMENT Tips for using USB storage devices y Only a USB storage device is recognizable. y If the USB storage device is connected through a USB hub, the device is not recog- nizable. y A USB storage device using an automatic recognition program may not be recognized.
27 ENG ENGLISH ENTERT AINMENT y If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source.
28 ENG ENGLISH ENTERT AINMENT Browsing Files Browse for a file saved on a USB storage. 1 Press SETTINGS to access the main menu. 2 Press the search button to scroll to MY MEDIA and press OK . 3 Press the Search button to go to the Movie List , Photo List , Music List , or Content List that you want, and press OK .
29 ENG ENGLISH ENTERT AINMENT Supported file format T ype Supported file format Movie DA T ,MPG,MPEG,VOB,A VI,DIVX,MP4,MKV ,TS,T RP ,TP ,ASF ,WMV ,FL V) Movie (*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
30 ENG ENGLISH ENTERT AINMENT Viewing movies Play video files on display . Y our display shows all of the video files saved in a USB storage device or shared folder on a PC. 1 Press the Navigation buttons to scroll to My Media and press OK . 2 Press the Navigation buttons to scroll to Movie List and press OK .
31 ENG ENGLISH ENTERT AINMENT Tips for using playing video files y Some user-created subtitles may not work properly . y Some special characters are not supported in subtitles. y HTML tags are not supported in subtitles. y Subtitles in languages other than the sup- ported languages are not available.
32 ENG ENGLISH ENTERT AINMENT Video options 1 Press SETTINGS to access the Pop-Up menus. 2 Press the navigation buttons to scroll to Set Video Play , Set V ideo or Set Audio and press OK . y The option values changed in Movie List do not affect Photo List or Music List .
33 ENG ENGLISH ENTERT AINMENT Viewing photos View image files saved in a USB storage device. The displays on the screen may differ from the model. 1 Press the Navigation buttons to scroll to My Media and press OK . 2 Press the Navigation buttons to scroll to Photo List and press OK .
34 ENG ENGLISH ENTERT AINMENT Menu Description Option y Slide Spee d : Selects a slideshow speed ( Fast , Medium , Slow ). y T ransitionEffect : Set the view mode of the slideshow . y BGM : Selects a music folder for the background music. Hide Hides the option window .
35 ENG ENGLISH ENTERT AINMENT If you select Set Photo View , you can make adjustments as shown below: 1 Press the navigation buttons to scroll to select Slide Speed, T ransition Effect, or BGM. 2 Press the navigation buttons to scroll to make appropriate adjustments.
36 ENG ENGLISH ENTERT AINMENT 6 When listening to music, you can set the following: Music List Page 1/2 001. - B01.mp3 01:00 002. - B02.mp3 02:00 003. - B03.
37 ENG ENGLISH ENTERT AINMENT T ime elapsed/ Duration 00 2. B 02 .mp 3 00 :31 / 0 4:0 4 file name y Non-supported files are displayed the pre- view image by icon only . y Abnormal files are displayed in the form of bitmap . y A damaged or corrupted music file does not play but displays 00:00 in playtime.
38 ENG ENGLISH ENTERT AINMENT y While playing media files from Contents List, only the BACK, EXIT or V olume button are available. Selecting the BACK or EXIT button stops playing media files and returns to the screen view mode.
39 ENG ENGLISH ENTERT AINMENT DivX® VOD Guide DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www .divx.com/vod. 1 Press SETTINGS to access the main menus.
40 ENG ENGLISH ENTERT AINMENT Using PIP/PBP Displays videos and photos stored on the USB on a single monitor with the main and sub screens divided. (See page 50.) 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press OK .
41 ENG ENGLISH CUSTOMIZING SETTINGS CUST OMIZING SETTINGS Accessing Main Menus 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK .
42 ENG ENGLISH CUSTOMIZING SETTINGS PICTURE Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK .
43 ENG ENGLISH CUSTOMIZING SETTINGS Picture Mode options Setting Description Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss.
44 ENG ENGLISH CUSTOMIZING SETTINGS y If the Picture Mode setting in the Picture menu is set to Vivid, Standard, Cinema, Sport, or Game, the subsequent menus will be automatically set. y Y ou cannot adjust Sharpness , Color and Tint in the RGB/ DP/ HDMI-PC/ DVI-PC mode.
45 ENG ENGLISH CUSTOMIZING SETTINGS AUDIO Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to AUDIO and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK .
46 ENG ENGLISH CUSTOMIZING SETTINGS TIME Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to TIME and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK .
47 ENG ENGLISH CUSTOMIZING SETTINGS OPTION Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK .
48 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Tile Mode Tile Mode T o use this function - Must be displayed with various other products. - Must be in a function that can be connected to DVI Cable and distributor . T ile mode and choose T ile alignment and set the ID of the current product to set location.
49 ENG ENGLISH CUSTOMIZING SETTINGS T ile Mo de This monitor can be tiled with additional monitors to create a large tiled display . T ile Mo de - N atural mo de Whe n a cti ve, the p art of the i mag e that wo uld norma lly be displ aye d in t he gap betwe en the monit ors is omi tte d.
50 ENG ENGLISH CUSTOMIZING SETTINGS PIP/PBP Displays videos or photos stored in the USB device on a single mo nit or by di vid ing it in to the m ain an d s ub scr een s. (S ee pag e 4 0.) P o si t i o n M o de S i ze top left top right bottom left bottom right * PIP (Picture In Picture) : Displays the Sub screen in the main screen.
51 ENG ENGLISH CUSTOMIZING SETTINGS Picture ID Settings Picture ID is used to change the settings of a specic display using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS232C cables.
52 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Player Name Sets the player name used in SuperSign Manager . (Up to 20 characters) Network Setting Configure the network settings.
53 ENG ENGLISH MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the ports on the monitor set’s back panel. 1 Find an external device you want to connect to your monitor set shown on the following illustration. 2 Check the connection type of the external device.
54 ENG ENGLISH MAKING CONNECTIONS E x te rn al D ev ic e C on ne ct io n Connect a HD receiver , DVD, or VCR player to the monitor set and select an appropriate input mode.
55 ENG ENGLISH MAKING CONNECTIONS HDMI Connection T ransmits the digital video and audio signals from an external device to the monitor set. Connect the external device and the monitor set with the HDMI cable as shown on the following illustration. y Use a High Speed HDMI™ Cable.
56 ENG ENGLISH MAKING CONNECTIONS LAN Connection A Using a router (Switch) Monitor Set Network PC LAN Switch Monitor Set Network PC LAN B Using the Internet.
ENGLISH 57 USING THE TOUCH SCREEN T o Use the T ouch Screen on Windows 7 Plug a USB cable into the T ouch USB port on the back of the monitor . Then, connect the USB cable to your PC so that it automatically recognizes the touch screen monitor .
ENGLISH 58 USING THE TOUCH SCREEN T o Use the T ouch Screen on Windows XP Plug a USB cable into the T ouch USB port on the back of the monitor . Y ou can see the details of the current touch screen on the Device Manager window . Go to Control Panel > System > Hardware > Device Manager > Human Interface Devices.
ENGLISH 59 USING THE TOUCH SCREEN T ouch Response to Windows XP T ouch: Mouse click (action) Long-press: Mouse right click (context menu) * The touch screen monitor is optimized for Windows 7. y The monitor can respond to one T ouch Point when connected to a Windows XP computer .
ENGLISH 60 USING THE TOUCH SCREEN Landscape Portrait How to Use LG TDS LG TDS is required to enable portrait mode and the long-touch on Windows XP . y Current Display Settings Displays the current screen information.
ENGLISH 61 USING THE TOUCH SCREEN Precautions When Using the T ouch Screen y The monitor is optimized for indoor use. y The touch screen monitor is optimized for Windows 7.
62 ENG ENGLISH TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord connected? y See if the power cord is properly connected to the outlet. Does the Out of range message appear? y The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product.
63 ENG ENGLISH TROUBLESHOOTING The screen image looks abnormal. Problem Resolution Is the screen position wrong? y D-Sub analog signal - Press the AUTO button in the remote control to automatically select the optimal screen status that fits into the current mode.
64 ENG ENGLISH TROUBLESHOOTING Screen color is abnormal. Problem Resolution Screen has p oor c olor r esolu tion (16 colors). y Set the number of colors to more than 24 bits (true color) Select Control Panel - Display - Settings - Color T able menu in Windows.
65 ENG ENGLISH TROUBLESHOOTING I have a problem with touch response. Problem Resolution T ouch does not respond. y Check the USB cable connection. - This may occur when the USB cable between PC and monitor is not connected. Check the USB cable and make it firmly connected.
66 ENG ENGLISH TROUBLESHOOTING Problem Resolution A touch is applied to a monitor other than the one I intended. y Change your tablet PC settings (Windows 7).
67 ENG ENGLISH SPECIFICA TIONS SPECIFICA TIONS LCD Panel Screen T ype 1064.67 mm (42 inch) Wide TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1064.67 mm Pixel Pitch 0.4833 mm (H) x 0.4833 mm (V) Video Signal Max.
68 ENG ENGLISH SPECIFICA TIONS Dimensions (Width x Height x Depth) / Weight 99 0.9 mm x 58 5 m m x 95 .3 mm / 15. 9 kg 99 0.9 mm x 58 5 m m x 95 .3 mm / 16.
69 ENG ENGLISH SPECIFICA TIONS 47WT30MS LCD Panel Screen T ype 1 192.78 mm (47 inch) Wide TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Panel.
70 ENG ENGLISH SPECIFICA TIONS Dimensions (Width x Height x Depth) / Weight 1 10 2.7 mm x 64 7.8 mm x 10 0.7 mm / 20 .5 kg 1 10 2.7 mm x 64 7.8 mm x 10 0.
71 ENG ENGLISH SPECIFICA TIONS 55WT30MS LCD Panel Screen T ype 1387.80 mm (55 inch) Wide TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Panel.
72 ENG ENGLISH SPECIFICA TIONS Dimensions (Width x Height x Depth) / Weight 1272.6 mm x 743.4 mm x 100.4 mm / 28 kg 1272.6 mm x 743.4 mm x 100.4 mm / 28.
73 ENG ENGLISH SPECIFICA TIONS Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the Mounting on a W all section for sizes of screws. Product specifications shown above may be changed without prior notice due to upgrade of product functions.
74 ENG ENGLISH SPECIFICA TIONS Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the Mounting on a W all section for sizes of screws. Product specifications shown above may be changed without prior notice due to upgrade of product functions.
75 ENG ENGLISH SPECIFICA TIONS Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the Mounting on a W all section for sizes of screws. Product specifications shown above may be changed without prior notice due to upgrade of product functions.
76 ENG ENGLISH SPECIFICA TIONS RGB (PC) supported mode Resolution Horizontal Frequency(kHz) V ertical Frequency(Hz) 640 x 350 31.469 70.8 720 x 400 31.468 70.8 640 x 480 31.469 59.94 800 x 600 37.879 60.317 832 x 624 49.725 74.55 1024 x 768 48.363 60 1280 x 720 44.
77 ENG ENGLISH IR CODES IR CODES y All models do not support the HDMI/USB function. y Some key codes are not supported, depending on the model. Code (Hexa) Function Note 08 Power R/C BUTTON 0B INPUT R.
78 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT CONTROLLING THE MUL TIPLE PRODUCT y Use this method to connect several products to a single PC. Y ou can control several products at a time by connecting them to a single PC. y In the Option menu, Set ID must be between 1 and 255 without being duplicated.
79 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT Command Reference List COMMAND DA T A (Hexadecimal) 1 2 01. Power k a 00 to 01 02. Input Select x b Refer to ‘Input Select.’ 03. Aspect Ratio k c Refer to ‘Aspect Ratio.’ 04. Energy Saving j q Refer to ‘Energy Saving.
80 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT COMMAND DA T A (Hexadecimal) 1 2 39. T ile Mode d d 00 to 01 40. T ile Mode Check d z FF 41. T ile ID d i Refer to ‘Tile ID.’ 42. T ile H Position d e 00 to 32 43. T ile V Position d f 00 to 32 44. T ile H Size d g 00 to 32 45.
81 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT T ransmission / Receiving Protocol T ran smi ssi on [C omm and 1] [Co mma nd2 ][ ][ Set ID ][ ][ Dat a][ Cr] * [Co mma nd 1]: Fi rst co mm and to co nt rol th e s et. * [Co mma nd 2]: Se con d c om man d t o c on tro l t he set .
82 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 04. Energy Saving (Command: j q) T o set the Energy Saving function. T ransmission [j][q][ ][Set ID][ ][Data][Cr] Data 00: Off 01: Minimum 02: Medium 03. Maximum 04: Auto 05. Screen Off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] ** It may not be supported depending on the model.
83 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 07. Brightness (Command: k h) T o adjust the screen brightness. T ransmission [k][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) T o adjust the screen sharpness.
84 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 13. V Position (Command: f r) T o adjust the screen V ertical Position. * This functio n is available only when the Tile Mode is set to Off. * The operational range varies depending on the RGB input resolution.
85 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 22. V olume Control (Command: k f) T o set the playback volume. T ransmission [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: V olume 0 to 100 Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 23. Time 1(Y ear/ Month/ Day) (Command: f a) T o set the T ime 1(Y ear/ Month/ Day) values.
86 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 25. Off Timer(Repeat Mode/ T ime) (Command: f e) T o set the Off Timer(Repeat Mode/ T ime) function. T ransmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1.
87 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 27. On Timer Input (Command: f u) T o select an external input for the current On T ime setting and add a new schedule or change the existing schedule. T ransmission [f][u][ ][Set ID][ ][Data1][Cr] [f][u][ ][Set ID][ ][Data1][Data2][Cr] Data (Add schedule) 20: Input (A V) 40: Component 60.
88 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 31. Auto Off (Command: f g) T o set the Auto Off function. T ransmission [f][g][ ][Set ID][ ][Data][Cr] Data 00: Off (No of f after 15 minutes) 01: 15 min.(Off after 15 minutes) Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 32.
89 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 37. Fail Over Input Select (Command: m j) T o select the input source for auto switch. * This command is only available when the fail over (auto) mode is set to Custom.
90 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 43. Tile V Position (Command: d f) T o adjust the T ile V ertical position. * This function is available only when the Natural option of the T ile Mode is set to Off while the T ile Mode set to On.
91 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 49. F AN Fault Check (Command: d w) T o check the fan errors. T ransmission [d][w][ ][Set ID][ ][Data][Cr] Data FF: Read the status Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] Data 00: Fan fault 01: Fan OK 02: Model without a Fan 50.
92 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 55. Serial No.Check (Command: f y) T o check the Serial Numbers. T ransmission [f][y][ ][Set ID][ ][Data][Cr] Data FF: Check the product Serial Number Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] * Data is ASCII code.
93 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 61. PC Power Control (Command: d t) T o control the PC power if the PC and the monitor are synchronized. T ransmission [d][t][ ][Set ID][ ][Data][Cr] Data 00: Synchronized (When the monitor is off, the PC is also turned off.
94 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 65. Sta tus check (Command: s v) Check various statuses. T ransmission [s][v][ ][Set ID][ ][Data][ ][FF][Cr] Data 05: Check the normal operation of No.1 and No.2 luminance sensors. 06: luminance sensor being used: 07: Check the normal operation of top, bottom, or main temperature sensors.
As an ENER GY ST AR Partne r L GE U . S. A.,I nc. h as dete rmined that this product meet s the ENERGY ST AR gui deli nes f or ener gy effici ency . E N E R G Y S T A R i s a s e t o f p o w e r - s a v i n g g u i d e l i n e s i s s u e d b y t h e U.
デバイスLG 55WT30MS-Bの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
LG 55WT30MS-Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLG 55WT30MS-Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。LG 55WT30MS-Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。LG 55WT30MS-Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
LG 55WT30MS-Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLG 55WT30MS-Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、LG 55WT30MS-Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLG 55WT30MS-Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。