LG Electronicsメーカー29FS2AMB/ANXの使用説明書/サービス説明書
ページ先へ移動 of 40
COLOR TV SER VICE MANUAL CHASSIS : MC-05HA MODEL : 29FS2AMB/ANX MODEL : 29FS2AMB/ANX-ZE website:http://biz.LGservice.com e-mail:http://www.LGEservice.com/techsup.
- 2 - CONTENTS CONTENTS .............................................................................................. 2 SAFETY PRECAUTIONS ..........................................................................3 CONTROL DESCRIPTIONS ..............
- 3 - SAFETY PRECAUTIONS Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List.
All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset Before you use the remote control handset, please install the bat- teries. See the next page.
- 5 - 14. MENU selects a menu. 15. LIST displays the programme table. 16. SSM (Sound Status Memory) recalls your preferred sound setting. 17. EYE/ * (option) switches the eye function on or off. 18. Q.VIEW returns to the previously viewed programme. 19.
- 6 - 1. MAIN POWER (ON/OFF) switches the set on or off. 2. POWER/STANDBY INDICATOR illuminates brightly when the set is in standby mode. dims when the set is switched on. 3. MENU selects a menu. 4. OK accepts your selection or displays the current mode.
SPECIFICA TIONS Note : Specification and others are subject to change without notice for improvement. Item Receiving system AV receiving system Component receiving system Available Channel Input Volta.
- 8 - 1. Application Object These instructions are applied to all of the color TV, MC-05HA chassis. 2. Notes (1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument.
12) Download the file with ‘OK’ button. 13) Check download process(about 30~40 sec.). 4. DVCO Adjustment 1) This adjustment applies to the frame assembly unit adjustment. 2) This adjustment is to adjust the crystal oscillator frequency of VCTP IC and is done after receiving the PAL B/G digital pattern signal.
(5) Open angle of the two tab of 6 pole magnet by isogonic angle and accord with vertical line of Red/Blue and Green. (6) Maintain as angle of (5) and rotate the tab to accord with horizontal line. In case of twisted horizontal line,repeat adjustment of (3) ~ (5) remembering the movement of Red/Green/Blue color.
- 1 1 -.
10. Deflection Data Adjustment - Manual adjustment can be done by the following procedure. 10-1. Preliminary steps 1) Set the Deflection data with the remote controller. 2) Enter the Adjustment mode by pressing the ADJ button. 3) Select the “DEFLECT” to adjust Deflection Data.
- 1 3 - 1 1. Deflection setting initial data * Check adjustment condition at 1080i/50Hz, NTSC60Hz after finishing adjustment in PAL100Hz, adjust defection adjustment at each Mode again. * Sequence :PAL 100Hz(RF) -> NTSC 60Hz(RF) -> 1080i/50Hz(COMPONENT) 12.
<Table 1> OPTION 1 <Table 2> OPTION 2 - 1 4 - 1 2 3 4 5 6 7 Option TEXT (2bit, Caption, 200PR) VCTP TOP ACMS CH+AU BOOST PIP 3: WITH CAPTION(CANADA) 2: WITH CAPTION 1: W/TXT & 200 PROG.
- 1 5 - Specification 0: ENG ONLY 1: EU 5EA 2: EU ETC 3: GREECE 4: PARSI 5: ARAB URDU 6: E+HINDI 7: E+I+M+V 8: E+THAI 9: E+CHINA 0: WEST EU 1: EAST EU1 2: TURKEY EU 3: EAST EU2 4: CYRILLIC1 5: CYRILLI.
14. SERVICE MODE DA T A <Table 6> Basic data of DDP3316C <Table 7> Basic data of DDP3316C - 2 <Table 8> W/B DATA <Table 5> OPTION5 - 1 6 - 1 2 3 4 5 6 7 8 Option C/PTV AUTOCVG .
- 1 7 - TROUBLE SHOOTING 1. No Picture (sound ok) 2. No Sound (picture ok) YES YES NO NO NO CVBS Signal? (2Vpp) YES NO Check around IC500 YES NO Check around Q505, Q506, Q507 YES <AV1, 2, 3, Compon.
- 1 8 - 3. No PIP 4. No power <AV1, 2, 3> <RF> <SCART> NO Check AV JACK1 Check TU102 YES YES Waveform of Digital Board IC001 #189, 182, 188? Waveform of MAIN1 Q101(E)? Check Digital .
- 1 9 - Check ST_Voltage Check IIC bus lime (SDA, SAC) Check/ Replace F1771 Is the voltage at VCC of IC001 ST_1.8V and ST_3.3V? Check/ Replace IC500 Check the voltage at P803B 5.
- 2 0 - PRINTED CIRCUIT BOARD MAIN.
- 2 1 - DIGIT AL (TOP) ST AND-BY.
- 2 2 - SIDE-A/V HARMONICS DIGIT AL (BOTTOM).
- 2 3 - CPT POWER S/W CONTROL LED + PRE-AMP.
- 2 4 - BLOCK DIAGRAM V ertical V ertical 1. MAIN.
- 2 5 - 2. VCT -P(Video).
- 2 6 - 3. VCT -P(Audio).
MEMO - 2 7 -.
EXPLODED VIEW - 2 8 - 112 913 170 150 510 400 943 503 501 550 520 580 120 300 310 530 600 540 331 330 320 590 560.
- 2 9 - EXPLODED VIEW P AR TS LIST LOCA. NO PART NO DESCRIPTIONS 112 6335929004A CPT,ITC A68ERS370X V1 N 29INCH SUPER-SLIM 0.40G 4/3 0HZ 6335929004B CPT,ITC A68ERS370X V1 L 29INCH SUPER-SLIM 0.50G 4/3 120 6400VA0025E Speaker,Fullrange C163A01K1451 FERRITE 15W 8OHM 86DB 110HZ 193X57X44.
- 3 0 - REPLA CEMENT P AR TS LIST LOCA. NO P ART NO DESCRIPTION Q430 Q431 Q500 Q501 Q502 Q503 Q504 Q505 Q506 Q507 Q508 Q509 Q651 Q820 Q821 Q871 Q880 Q881 Q901 Q902 Q905 Q906 D160 D1801 D1802 D1803 D18.
- 3 1 - LOCA. NO P ART NO DESCRIPTION D850 D851 D860 D870 D901 D902 D903 D904 D905 D906 D907 D908 D909 D920 ZD001 ZD002 ZD101 ZD102 ZD1201 ZD1202 ZD1801 ZD1802 ZD202 ZD401 ZD420 ZD440 ZD500 ZD650 ZD91.
- 3 2 - LOCA. NO P ART NO DESCRIPTION C233 C234 C235 C236 C244 C248 C251 C252 C253 C254 C257 C259 C262 C267 C268 C301 C302 C303 C304 C305 C306 C307 C308 C310 C401 C402 C403 C404 C405 C406 C420 C421 C4.
- 3 3 - LOCA. NO P ART NO DESCRIPTION C851 C852 C852 C853 C860 C861 C862 C870 C871 C872 C873 C874 C880 C881 C883 C884 C885 C886 C901 C903 C904 C905 C906 C907 C908 C910 C91 1 C920 C921 C922 C923 C924 C.
- 3 4 - LOCA. NO P ART NO DESCRIPTION FR901 J168 R026 R05E R062 R088 R101 R103 R104 R105 R107 R108 R109 R1 10 R1 1 1 R1 12 R1 13 R1 14 R1 15 R1 16 R1 17 R1 18 R1 19 R120 R1204 R1206 R1208 R1212 R122 R.
R438 R439 R440 R441 R443 R444 R445 R445 R446 R447 R456 R457 R458 R460 R461 R547 R582 R593 R594 R595 R596 R597 R651 R652 R653 R654 R657 R658 R659 R670 R672 R673 R800 R804 R805 R806 R807 R808 R809 R810 .
- 3 6 - LOCA. NO P ART NO DESCRIPTION SW1 SW1701 SW2 SW3 SW4 SW5 FB101 FB403 L002 L003 L004 L005 L006 L007 L008 L009 L010 L01 1 L012 L013 L501 L502 L503 L504 L505 L801 L802 L830 L840 L861 L870 L880 L9.
P/No : 38549D0023A-1/2 2006.01.20.
P/No : 38549D0023A-2/2 2006.01.20.
SV C. SHEET : 38549D0023A-S.
May, 2006 Printed in Korea P/NO : 38289S0046B.
デバイスLG Electronics 29FS2AMB/ANXの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
LG Electronics 29FS2AMB/ANXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLG Electronics 29FS2AMB/ANXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。LG Electronics 29FS2AMB/ANXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。LG Electronics 29FS2AMB/ANXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
LG Electronics 29FS2AMB/ANXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLG Electronics 29FS2AMB/ANXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、LG Electronics 29FS2AMB/ANXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLG Electronics 29FS2AMB/ANXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
