Light & MotionメーカーHC3の使用説明書/サービス説明書
ページ先へ移動 of 24
Bluefin HC3 Owner’ s Manual www .uwimaging.com For the Son y HDR-HC3 camcorder.
W elcome Congratulations on your pur chase of the Bluefin underwater video housing. Please inspect the packaging of your pr oduct to verify that there was no damage during shipping. If you ar e not familiar with your camcorder’ s features, please tak e time to become familiar with the camcorder befor e you pr oceed in this manual.
3 T able of Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Camera Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Getting Star ted Illustrated below ar e the locations of Bluefin’ s features and functions. T ake time to familiarize yourself with the housing. Monitor Base Light Arm Base Lens Lock ON/MODE Butto.
5 Camera Pr eparation 1. Install a fully charged Son y NP-FP90 batter y . 2. Install a HD D VC tape into your camcor der . 3. If still images are desir ed, install a Memor y Stick Duo.
6 P-Menu Setup The P-Menu is a customizable menu that allo ws quick access to commonly used camera featur es.This is ver y useful underwater since controls such as White Balance can only be accessed thr ough the camera’ s menu system.
7 (Fig. 5) (Fig. 6) (Fig. 7) (Fig. 8).
8 Mounting the Camera 1. Remov e the rear plate b y pushing the Latch Lock in and rotating the latch do wn and forward of the housing body . (Refer fig. 9) 2. Remov e the Camera T ray . A. Push forward on the Camera T ray . B. Press the Camera T ra y Release Latch down.
9 and that the O-rings seat ev enly . Operation Left Smar t Grip Controls (Refer fig. 12) Far - Moves focus point further from camcor der . Near - Mov es focus point closer to camcorder . Photo - Records still video captur e to Memor y Stick (in either mode).
10 Rear Plate (Refer fig. 15) On/Mode - T urns the camcorder on and cycles thr ough modes. Housing Left Side (Refer fig. 16 and 17) Manual - Activates the camera’ s manual button. Briefly pushing this button activates manual contr ol of the active function.
11 Smooth Slo w Recording Set up the P-Menu as described in this manual under P-Men u Setup . Befor e loading the camera into the housing set the mode for the Smooth Slow Recording function to either captur e images seen by the camera before or after the Record button is pushed.
12 Lens Installation / Remo val T o Install Lens 1. Perf orm o-ring inspection. 2. Align lens to housing details. 3. Press lens into housing. 4. Rotate clockwise until Locking pin engages. T o Remove Lens 1. Slide Locking pin outward a wa y from lens.
13 Bluefin Monitors - Getting Star ted Illustrated below ar e the components of the Compact Monitor and the Remote Monitor . T ake time to identify and become familiar with each part.
14 Bluefin Monitor - Bulkhead Installation 1) Remov e the Rear Plate. 2) Using a flat head scre wdriver or coin, remove the P or t Plug. (Refer Fig. 16) 3) On the inside of the Rear Plate, remov e the four screws using a 3/32 allen k ey and remo ve cir cuit board.
15 Compact Monitor Operation Po wer On/Off The monitor will pow er on and off with the camcorder . Remote Monitor Operation 1) If necessar y , activate pow er to the monitor by switching the pow er switch on the inside of the Rear Plate to the ON position.
16 Charging the Remote and Compact Monitor 1) Remov e the Charging Port Plug using a coin or large flat head scre wdriver . (Refer fig. 20) 2) Plug charger into a 110v outlet. This charger is only rated at this v oltage. If you do not ha ve access to a 110v outlet, you must use a conv er ter .
17 Bluefin Light Systems - Getting Star ted Pictured belo w are the components of the Sunra y-S Mini Pro and Sunra y-S Mini Elite lighting system. T ak e a moment to familiarize yourself with each part for later identification and use.
18 Charging Ba tteries It is recommended that y ou charge your batteries when they ar e receiv ed. It is also r ecommended to charge batteries just prior to use. 1) The charger can accept an electrical range of 100 - 240v and 50 - 60hz. 2) The charger has two LED lights: Left LED: Orange when charging Li-ion batteries.
19 Mounting Battery P ods 1) Remov e the rear plate of the housing. 2) Slide the batter y pods into housing channels. 3) Insert Pod Lock er between the pods and tighten using 1/8” allen ke y . Do not ov er -tighten. Connecting Lights to Battery P ods 1) Plug in the cable connectors on the pod.
20 (Fig. 25) (Fig. 26) (Fig. 27) (Fig. 28) 1) Using an allen k ey , remov e the two scre ws on the back of the handle . (Refer fig. 25) 2) Remov e the Handle Cap fr om the handle assembly . (Refer fig. 26) 3) Remov e old batteries from handle boar d. 4) Install new 1/3 N batteries into the handle boar d.
21 First Time Use All Light & Motion equipment is pressur e tested prior to shipping. Howe ver , ther e could be unseen damage due to shipping. A test dive without the camcorder in the housing is highly r ecommended. After the initial dive with just the housing, mak e the following checks: 1.
Rear Plate O-rings Smart Grip O-ring Optic O-rings 4) T o check O-rings for damage, place the O-ring betw een the index finger and thumb. Then pull the O-ring through y our fingers, feeling for an y debris or wear . 5) If O-rings are dirty , it is best to replace them.
Bluefin Accessories Bluefin T wo-Y ear Fault Free W arranty . . . . . . . . . . . . . .905-0201 Bluefin Super Macro Lens . . . . . . . . . . . . . . . . . . . . . . .802-0095 Bluefin T ripod Mount . . . . . . . . . . . . . . . . . . . . . . . . . . .802-0152 Bluefin Pole Cam Mounting Kit .
Light & Motion 300 Canner y Row • Monter ey , C A 93940 (831) 645-1525 • Fax (831) 375-2517 www .uwimaging.com 905-0266-A.
デバイスLight & Motion HC3の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Light & Motion HC3をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLight & Motion HC3の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Light & Motion HC3の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Light & Motion HC3で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Light & Motion HC3を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLight & Motion HC3の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Light & Motion HC3に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLight & Motion HC3デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
