Lincoln ElectricメーカーSQUARE WAVE IM565-Bの使用説明書/サービス説明書
ページ先へ移動 of 32
Square W a v e TIG 175 OPERA T OR’S MANU AL IM565-B April, 2000 Safety Depends on Y ou Lincoln arc welding and cutting equipment is designed and built with saf ety in mind. Howe ver , your ov erall saf ety can be increased by proper installation ...
FOR ENGINE powered equipment. 1.a. T ur n the engine off bef ore troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b . Operate engines in open, well-v entilated areas or vent the engine e xhaust fumes outdoors.
ii SAFETY ii ARC RA YS can b urn. 4.a. Use a shield with the proper filter and cov er plates to protect your e yes from sparks and the ra ys of the arc when welding or observing open arc welding. Headshield and filter lens should conform to ANSI Z87. I standards.
FOR ELECTRICALL Y powered equipment. 8.a. T ur n off input power using the disconnect switch at the fuse bo x before working on the equipment. 8.b . Install equipment in accordance with the U .S. National Electrical Code, all local codes and the manuf acturer’ s recommendations.
iv SAFETY iv PRÉCA UTIONS DE SÛRETÉ P our v otre propre protection lire et obser v er toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suiv- antes: Sûreté P our Soudage A L ’Arc 1.
Thank You f or selecting a QU ALITY product by Lincoln Electric. We w ant you to take pride in operating this Lincoln Electric Company product ••• as much pride as we hav e in br inging this product to y ou! Read this Operators Manual completel y bef ore attempting to use this equipment.
T ABLE OF CONTENTS P age SAFETY .........................................................................................................................i-iv INST ALLA TION SECTION ......................................................................
1 INST ALLA TION SQU ARE W A VE TIG 175 1 TECHNICAL SPECIFICA TIONS - Square W ave TIG 175 (K1478-1 & -2 only) For A C/DC Stic k and DC TIG W elding at 150A/25% Duty Cycle and f or A C TIG Welding up to 110A/25% Duty Cycle. Based on the 1996 U.S. National Electrical Code For A C TIG W elding at 150 A/25% Duty Cycle, Based on the 1996 U .
2 INST ALLA TION SQU ARE W A VE TIG 175 2 ELECTRIC SHOCK can kill. • Only qualified personnel should perform this installation. • T urn the input power OFF at the disconnect switch or fuse bo x before w orking on this equipment. • Do not touch electrically hot parts.
3 INST ALLA TION SQU ARE W A VE TIG 175 3 with the ear th f or ten f eet or more. b) A 3/4” (19mm) galvaniz ed pipe or a 5/8” (16mm) solid galvaniz ed iron, steel or copper rod driven at least eight f eet into the ground.
4 INST ALLA TION SQU ARE W A VE TIG 175 4 Electrode/Gas Output Receptacle on the front of the welder and turn it clockwise until it is tight. This is a quick connect terminal and also provides the gas con- nection f or the shielding gas to the torch. T o av oid receiving a high frequency shock, k eep the TIG torch and cables in good condition.
5 INST ALLA TION SQU ARE W A VE TIG 175 5 REMO TE CONTR OL CONNECTION A remote control receptacle is provided on the case front of the welder f or connecting a remote control to to the machine. A Foot Amptrol tm , f oot activ ated remote control, is included with the Square W ave TIG 175.
6 OPERA TION 6 GENERAL DESCRIPTION The Square W ave TIG 175 is a constant current, single range A C/DC TIG (GT A W) arc welding pow er source with built-in arc starter / stabilizer .
7 OPERA TION 7 1. PO WER SWITCH & LIGHT - T ur ns power on or off to the welder . When s witched “ON”, the cool- ing f an runs and the light will illuminate indicating that the power is on. 2. TIG/STICK SWITCH - Selects the mode of output, either TIG (GT A W) or Stick (SMA W).
8 OPERA TION 8 6. REMO TE CONTR OL CONNECT OR - This connector provides connection f or a remote control. See Remote Control Operation in this section of the man ual.
9 OPERA TION 9 to weld through the complete range of 10 to 175 amperes in A C TIG or DC- TIG requiring only one electrode, a 3/32” 2% thoriated tungsten. WELDING IN STICK MODE 1. Put the electrode holder and cable quic k connect plug into the electrode output receptacle.
10 A CCESSORIES 10 OPTIONAL A CCESSORIES K964-1 Undercarria ge with Pivoting Single Gas Cylinder Platform - This undercarriage features a piv- oting platf or m to easily load and unload the gas cylin- der without lifting.
11 MAINTENANCE 11 SQU ARE W A VE TIG 175 ELECTRIC SHOCK can kill. • Onl y qualified personnel should perform this maintenance. • T urn the input power OFF at the disconnect switch or fuse bo x before w orking on this equipment. • Do not touch electricall y hot parts.
12 TR OUBLESHOO TING 12 SQU ARE W A VE TIG 175 If f or any reason y ou do not understand the test procedures or are unable to perf or m the tests/repairs saf ely , contact your Local Lincoln A uthorized Field Service Facility for technical troub leshooting assistance before y ou proceed.
13 TR OUBLESHOO TING 13 SQU ARE W A VE TIG 175 Obser v e all Saf ety Guidelines detailed throughout this manual If f or any reason y ou do not understand the test procedures or are unable to perf or m.
14 TR OUBLESHOO TING 14 SQU ARE W A VE TIG 175 Obser v e all Saf ety Guidelines detailed throughout this manual If f or any reason y ou do not understand the test procedures or are unable to perf or m.
15 TR OUBLESHOO TING 15 SQU ARE W A VE TIG 175 Obser v e all Saf ety Guidelines detailed throughout this manual If f or any reason y ou do not understand the test procedures or are unable to perf or m.
16 TR OUBLESHOO TING 16 SQU ARE W A VE TIG 175 Obser v e all Saf ety Guidelines detailed throughout this manual If f or any reason y ou do not understand the test procedures or are unable to perf or m.
17 TR OUBLESHOO TING 17 SQU ARE W A VE TIG 175 Obser v e all Saf ety Guidelines detailed throughout this manual If f or any reason y ou do not understand the test procedures or are unable to perf or m.
18 TR OUBLESHOO TING 18 SQU ARE W A VE TIG 175 Obser v e all Saf ety Guidelines detailed throughout this manual If f or any reason y ou do not understand the test procedures or are unable to perf or m.
19 WIRING DIA GRAM 19 SQU ARE W A VE TIG 175 L10060 (-) (+) SCR4 SCR2 SCR1 D C B A F E D C B A L1 (-) T4 NC NO T3 S F L3 L4 C3 SCR3 115VAC Y W H1 X1 H G OPEN CLOSED CLOSED G4 216 G3 218 G2 G1 217 220 .
20 WIRING DIA GRAM 20 SQU ARE W A VE TIG 175 L1 L2 L2 C2 C1 C3 B 242 R 241 TM 209 210 230 232 238 234 235 204 R 201 U 236 B B W J4 B B GAP SPARK B-D, A-E, C-F, G-H B-D, C-E, A-F, G-H A-C, D-E, B-F DC- 216 238 236 W SV1 234 235 W H1 H2 POS W X3 B X7 W X5 W X6 B X4 B X8 L10569 C1 AND C2 MUST ALWAYS BE CONNECTED ACROSS POWER SWITCH.
NO TES SQU ARE W A VE TIG 175.
Now A vailab le...12th Edition The Procedure Handbook of Ar c Welding With ov er 500,000 copies of pre vious editions published since 1933, the Procedure Handbook is considered by man y to be the “Bible” of the arc welding industr y . This printing will go fast so don’t dela y .
W ARNING A VISO DE PRECA UCION A TTENTION W ARNUNG A TENÇÃ O Spanish French German P ortuguese Japanese Chinese Korean Arabic READ AND UNDERST AND THE MANUF ACTURER’S INSTRUCTION FOR THIS EQUIPMENT AND THE CONSUMABLES TO BE USED AND FOLLOW YOUR EMPLOYER’S SAFETY PRACTICES.
W ARNING A VISO DE PRECA UCION A TTENTION W ARNUNG A TENÇÃ O Spanish French German P ortuguese Japanese Chinese Korean Arabic LEIA E COMPREENDA AS INSTRUÇÕES DO F ABRICANTE P ARA ESTE EQUIPAMENTO E AS P ARTES DE USO, E SIGA AS PRÁTICAS DE SEGURANÇA DO EMPREGADOR.
• Sales and Ser vice through Subsidiaries and Distributors Worldwide • Cle veland, Ohio 44117-1199 U .S.A. TEL: 216.481.8100 F AX: 216.486.1751 WEB SITE: www .
デバイスLincoln Electric SQUARE WAVE IM565-Bの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Lincoln Electric SQUARE WAVE IM565-Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLincoln Electric SQUARE WAVE IM565-Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lincoln Electric SQUARE WAVE IM565-Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lincoln Electric SQUARE WAVE IM565-Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lincoln Electric SQUARE WAVE IM565-Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLincoln Electric SQUARE WAVE IM565-Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lincoln Electric SQUARE WAVE IM565-Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLincoln Electric SQUARE WAVE IM565-Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
