LongshineメーカーLCS-PS110の使用説明書/サービス説明書
ページ先へ移動 of 83
Longshine Technologie Europe GmbH ww w.longshine.de.
T ABLE OF C ONTENTS C OPYRIGHT ........................................................................................................................................ 3 1. INTRODUCTION .................................................................
8. UPGRADING PRINT SERVER ................................................................................................. 63 O VERVIEW ..................................................................................................................
T rademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003 are registered tradem arks of Microsoft Corp.
1. Introduction Product Overview The external print servers enhance capability by le tting you place your printers at convenient locations directly on the Ethernet network, and by increasing network printer performance and management. Please note that t he print server does not support printing with host-based printers, e.
LED Indicators LED State Indication Status Blinking for POST (Yellow ) When power switched on, the Stat us indicator will flash five times, and then on. 100Mbps On (Green) LAN Port has a valid network connection at 100Mbps. 10Mbps On (Yellow) LAN Port has a valid network connection at 10Mbps.
Network Environment Wired Network w ith Print Server: Printer Print Server Computer Computer Computer HUB 6.
2 . P rint S erver I nstallation Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking environments, the print server suppor ts industrial standard protocols, including TCP/IP, IPX/SPX, NetBEUI and AppleTalk.
NT/2000/XP/2003 management of print server, include alert and consumables multiple printers- anywhere on your LAN Internet Printing Protocol Windows NT/2000/XP/2003 Printing via the internet to Intern.
3. Software Installation The PSAdmin is a proprietary Windows-based m anagement program that can assist you in configuring and managing your pr int server in NetWare environments. The program can be installed from the setup CD of print server. Installing the PSAdmin and Print Server’s Driver 1.
3. Choose Setup Wizard to install the print server and configure the connected printer. Note: The setup CD will install the print server’s driver , PSAdmin and Setup Wizard into your computer. The default inst allation directory will be C:Program filesNetwork Print Monitor .
11.
6. On the Change Settings screen, select No or Yes : Click No if you want the print serv er to keep using the default IP address and keep the default settings: IP address: 192.168.0.10 Subnet Mask: 255.255.255.0 Click Yes if you want change IP address to the print server, and then click Next .
Select Add New Printer if the print server is connected to a printer that hasn’t been installed before and does not appear in the list. 13.
8. Click Add New Printer to launch Window s Add Printer Wizard . 9. Click Next and select Local Printer , make sure the Automatically detect and install my Plug and Play printer check box is NOT checked.
10. Make sure the Use the following port radio-button is clicked and select LPT1: (recommended Printer Port) from the pull-down list. Then click Next .
12. If you already have the printer’ s driver installed, you will be ask ed whether to keep it or to replace it. Click Next . Supply a name for the printer and choose whether you want to make it your default printer.
16. Right-click, select Properties -> Ports and verify that the print server’s port appears. 17.
17. Go to General ; click Print Test Page to verify the configuration. 18. Done. Note: If you want to install more print servers, start setup wizard from your Windows Start menu: start -> All Programs -> Network Print Server -> PSWizard and repeat the installation procedure.
Wizard Wizard is a configuration progr am that can assist you in se tting up the necessary parameters for your print server device to function. Setup a print server by using Wizard. TCP/IP Wizard 1. Click Wizard button just like a picture < > .and select TCP/IP Wizard .
4 (Optional) In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured to use. 5 (Optional) In the Gateway field, type the IP address of gateway. 6 When done, click OK button. The program will save the above settings into the print server.
Manual Setup Manual Setup is a configurati on program designed for more ex perienced users of NetWare. To setup the print server by us ing Manual Setup follow the steps: 1. Run PCONSOLE in NetWare 3.x or NetW are 4.x and create the necessary parameters (Refer to your Novell NetWare print server/Services manual for details).
Properties –TCP/IP Options The TCP/IP options allow you to modify the pr int server’s TCP/IP settings. Each option is detailed as follows. Obtain an IP address from a DHCP server: This option enables or disables the DHCP feature of the prin t server.
Upgrade Upgrade allows the user to upgr ade the print server device. In order to upgrade the unit please perform the steps as follows: 1. Click Upgrade button just like a picture < > , as shown as follow picture 2. S elect General Upgrade . Make sure that the upgrade file is located in the same directory as PSAdmin.
Note : Configure the print speed in the Advanced label, must match the printer’s speed which connect to the print server. Undependabl e configuration will cause printer to abnormal printing. Multiple Print Queues Configuration To configure the print server to service mult iple print queues, please follow the instructions listed below: 1.
3. Click Change or Remove Programs tab. 4. Select Network Print Monitor for Window s 95/98/NT/2000/XP/2003 and click Change/Remove button. 5. The un-installation wiz ard program will be launched. 6. Follow the directions on the screen to complete the un-installation procedure.
4.I nternet P rinter C onnection and HP W eb J etAdmin IPP Overview Print server(s) support the Internet Printing Pr otocol (IPP). Using the appropriate software on your system, you can create an IPP print path from your system as Windows PC over the Internet.
6. In URL’s box, input print server’s IP address, for example, http:// 192.168.10.182/lp1. Then Click Next . ** One port should be the port name as lp1. 7.It will check print server to connect to HP printer, if not, it will appear as follow picture.
9.If you want your Windows-based pr ograms to use this printer as the default printer, please select “ Yes ”, and Click Next . It will appear as follow picture 19.
Installing HP Web JetAdmin Before installing the HP Web JetAdmin software, you must have domain administrator or root privileges: Download the installation files from HP Customer Care Online at http://www.hp.com/go/webjetadmin/ . Follow the instructions on the screen to in stall the HP Web JetAdmin software.
Overview The Print Server contains an embedded web server that can be accessed through a supported web browser on a LAN, for exampl e, IE 4.0, Netsc ape 4.0 or above is recommended. The embedded web server provides access to configuration and management pages for the print server and the connected peripheral device.
Print Server Name: This option allows you to view device name of the print server. To correct the print server’s device name. System Contact: This option allows you to view contact name of the print server. To check the print server’s contact name who in charge of this device.
Printer Status 1.Click Status , it then appears the sub-menu. 2.Click Printer , it then as shown in the following picture. Manufacturer: This option allows you to view manufac turer of the printer. When the printer connected with the print server, it will be show in the manufacture box.
Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to view IP addr ess from the print server.
General Settings: Print Server Name: This option allows you to view print server’s name would be configured by PSAdmin utility. Polling Time: This option allows you to view polling time from the print server. This function is search for NetWare Server by per time .
AppleTalk Status 1.Click Status , it then appears the sub-menu. 2.Click AppleTalk , it then as shown in the following picture. AppleTalk Settings: If no any zone exists, the print server itself displays the zone name as an asterisk ( * ) in the current AppleTalk Status of the print server in the web browser.
SNMP Communities: This option allows you to view SNMP communities from the print server. There are two communities that control message from the network management of the print server. SNMP Traps: This option allows you to view SNMP traps from the print server.
Shared Name: This option allows you to view the Shared Name from the print server. Setup Menu Meanwhile, you have finished the IP address conf iguration with print se rver.
Email Alert: This option allows you to Enable/Disable the Email Alert support. SMTP Server IP Address: This option allows you to input the IP address of your Email SMTP server. Administrator E-mail Address: This option allows you to input your Email address that you want to receive the notification by Email.
Bi-directional Settings: This option allows you to select th e bi-directional of the print server. There are two ways to select this option, includes Disable or Auto Detect . TCP/IP Setup: 3. Click Setup , it then appears the sub-menu. 4. Click TCP/IP , it then as shown in the following picture.
DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to input IP addre ss from the print server.
Print Server Name: This option allows you to input print server name which configured by PSAdmin utility or PCOMSOLE program. Polling Time: The time interval in which the print server unit polls the file server for servicing of print queues. Logon Password: This option allows you to input encry pted password from the print server.
Installing Print Server on NetWare 4.x/5.x Due to its architecture and func tionality, the print server mu st work under NetWare 4.x/5.x NDS Bindery Emulation.
9. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to the NetWare print queue serviced by the print server. Note: Please refer to NetWare’s Print Server /Services manuals for detailed PCONSOLE commands.
Note: The default print server’s Chooser name is as shown as follows: < ATALK_PS > -xxxxxx-1 , where xxxxxx represent s the last six digits of the device’s Node ID. For example: ATALK_PS-40 EEED-1. You may also change the < ATALK_PS > to a name you like for identification purpose in th is option.
SNMP Setup TCP/IP networks use a standar d management protocol called Simple Network Management Protocol (SNMP). SNMP is widely used in t he industry as a solution for remote network management and monitoring of network ing devices. SNMP actually includes a protocol, a database structure specification, and a set of database objects.
snmp.snmpEnableAuthenTraps Enables or disables the function of sending SNMP Authentication Failure trap message to the net work administrator, if the community name within a SNMP request is not correct. Users can set up print server’s SNMP functions by using their browsers.
The print server supports the SMB (Server Mess age Block) protocol, user can send the print jobs through Network Neighborhood without installing print server’s driver. 1. Click Setup , it appears the sub-menu. 2. Click SMB , it as shown in the following picture.
Select A Desired Protocol TCP/IP The TCP/IP Protocol must be installed. For further information, please read “ TCP/IP Protocol Installation” section in this chapter. Note: If TCP/IP protocol is chosen, please refe r to “Assigning an IP Address to the print server” section later in this chapter.
6. Select TCP/IP Protocol from the Network Protocols list. 7. Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP address automatically”, if a DHCP se rver is available on the LAN. 8. Restart the computer. 9. Done. Note: Using TCP/IP protocol to access the pr int server requires well-configured TCP/IP settings.
6. Select NetBEUI from the Network Protocols box and follow the instructions on the screen. 7. Restart y our computer for new settings to take effect. 8. Done. Note: For more detailed information, please refer to your Microsoft Windows 9X/ME/NT/2000/XP/2003 manuals.
15. Select the Network Print Port and click OK . 16. The Add Port box will then appear, al ong with the print server’s Node ID (The last 6 digits of the Node ID, located on the back of the print server unit) . Select one printer server port from the list, which is now connec ted to (one of) your printer(s), as shown in the following picture.
It starts again to search for the print server on the network by us ing the protocol you specify in the step above. When finished, the print server will be displayed along with the its Node ID, as shown in the following picture. (The last 6 digits of the Node ID, located on the back of the print server unit) .
7. TCP/IP LPR Port Printing Installation Basic TCP/IP Installation Overview When installing your print server in a TCP/IP environment, IP addresses are essential as a basic means of communications. It is therefor e necessary to first assign an IP address to your print server unit.
DHCP The print server supports DHCP feature, allowing the print server to obtain an IP address and related TCP/IP settings automatically from a DHCP server. While the print server supports DHCP, we strongly recommend you manually specify a fixed IP address to the print server.
8. In the Printer Ports box, select Close . 9. Click Next . 10. Select the appropriate printer m anufacturer and printer type list and click Next . 11.
6. In the Add Standard TCP/IP Printer Port Wizard box as shown in t he following picture, Select Custom , Click Settings button, and click Next . 7. In the Configure Standard TCP/IP Port Monitor box as shown in the following picture, select LPR form Protocol, type in a queue name, for example, lp1.
Note: Please DO NOT type any other name than lp1 in this step. 9. Click Finish . 10. Select the appropriate printer m anufacturer and printer type list and click Next .
UNIX Installation After the static IP address is assigned, the Prin t Server is ready to be configured. For some UNIX/Linux systems, we include the detailed installation proc edures below.
Redhat Linux 9 The Print Server can work under any Linux- based systems, including Slackware, RedHat, etc, without any problems. Basically, the Linux's printing system is based on BSD system.
7. Click Forward button. 8. In the Name field, type a user-defined name, click Forward . 60.
9. In the Queue Type field, choose Networked UNIX . 10. In the Server field, type the IP address of print server 11. In the Queue field, type a print server’s port name, which connect to the printer. For example: lp1. 12. Click Forward button. 13. In the Printer field, choose Postscript Printer .
15. Done. 62.
8.U pgrading P rint S erver Overview Upgrading print server will allow you to upgrade it s firmware inside the print server while the newer software version of the pr int server is available from your local dealer.
3. Wait for the transfer successful message. 4. Done. Upgrading the print server from UNIX (Through TCP/IP) 1. Log in as root 2. Ensure binary file is located in your current working directory. 3. Type “ tftp <print server’s IP address> ”.
4. Click Browse… and select the firmware file. 5. Click Upgrade . 6. Done. 65.
9. T roubleshooting General Troubleshooting Overview The most common problems, which cause t he print server to perform improperly, are covered in this chapter. If a problem still exists after reading this chapter, please contact your dealer for technical support.
Windows 95/98/Me/NT/2000/XP/2003 Troubleshooting Multi-Segment LAN Environment Installation (through the Network Print Port) If your print server and Windows 95/98/Me/N T/2000/XP/2003 are located on t.
Moving the print server to A New Segment If the print server is moved from one network s egment to another after t he initial installation, through the Network Print Port, the print server must be rec.
Moving Your Computer to A New Segment If you are using the print server through the Network Print Port on your NT or Windows 95/98/Me computer and your computer is going to be moved onto another segment, you have to reconfigure the print server on your com puter to use your print server.
If this is the case, please consult your netwo rk administrator to obtain an unused IP address for your print server. C. The print server is on one segment a nd your Windows NT server is on the other segment.
6. In your editor, modify " BoxIPAddress " field from "0.0.0.0" to "192.72.214.100". Leave other options as default and do not change their values . When done, save this new file and quit from your editor. Please note, in this step you must specify an IP address which is valid on Segment B, such as 192.
Appendix: Rendezvous with Mac OS X 10.3.7 1. Enable the Rendezvous settings from t he print server’s WEB configuration. 2. Click " Printer Setup Utility ” from the bottom toolbox of Mac.
3. Click " Add ". 73.
4. Choose " Rendezvous ", and then Mac OS will automatically search the print server on the network. 5. Choose the proper printer model that c onnected to print server, and then click " Add ".
6. Now the network printer with Rende zvous has been successfully installed. SMB Printing with Windows XP 1. Enable the SMB settings from the print se rver’s WEB configurat ion. Assume your computers use the “ WORKGROUP ” as the SMB workgroup name in Windows.
2. Now you can find the print server from the SMB workgroup of Windows. Then, double click it. 3. Double click it again. 76.
4. Now you have to install the printer’s driver. 5. Choose it from the “Add Printer Wizard”. 77.
6. Install printer successfully. 7. Now, you can find your printer’s ic on and you can use the SMB printing mode. 78.
Reset Button Reboot the Print server : 1. Verify the power of print server is turned on. 2. Press the reset button once, and then release it. WARNING: This will restart the print serv er and stop all on-going and pending print jobs! Perform a Factory Default : 1.
Frequently Asked Questions Question A Print jobs are sent to the print queue successf ully, but fail to be sent to the printer. Possible explanations 1. The Print server Name/Print Queue c onfiguration in PCONSOLE is incorrect. 2. The Print server name specified and stored in the print server memory doesn’t match the same one set in PCONSOLE.
Question D The Status LED light keeps blinking after POST. Possible explanation and solution The last upgrade process was not completed. The print server must be upgraded again by using the PSAdmin.
Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 lase r printer with the print server through the Network Print Port under Windows 95/9.
デバイスLongshine LCS-PS110の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Longshine LCS-PS110をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLongshine LCS-PS110の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Longshine LCS-PS110の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Longshine LCS-PS110で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Longshine LCS-PS110を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLongshine LCS-PS110の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Longshine LCS-PS110に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLongshine LCS-PS110デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。