Lucent TechnologiesメーカーMLA-28Dの使用説明書/サービス説明書
ページ先へ移動 of 24
Document # 555-640-122 Comcode: 107713745 Issue 1, March 1996 MERLIN LEGEND ® Communications System Releases 3.1 and 4.0 MLX-10D ® , MLX-10DP TM , MLX-16DP TM , MLX-28D ® , and MLX-20L ® Display T elephones User ’ s Guide Your MERLIN LEGEND MLX Display Telephone .
Security Alert Your Responsibility for Your System’s Security Toll fraud, the unauthorized use of your telecommunications system by an unauthorized party (for example, persons other than your compan.
1 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 Oper 0 Speaker Hold Mute Drop HFAI Conf Feature Volume Transfer Home Menu Inspct More Message Line Buttons 2 Lines / 24 Characters Y our MERLIN LEGEND MLX Display T elephone ! CAUTION: T o clean your phone, unplug it from the wall jack and use a slightly dampened cloth.
Line Buttons Understanding Y our T elephone Tones Tone Meaning Dial tone (steady) You can make a call. Busy (slow repeating tone) The phone you are calling is busy. Fast busy (fast repeating tone) No lines are available. Error (alternating high-low tones) You dialed a number or used a feature incorrectly.
3 This table shows where to look for information about performing specific telephone activities. Any features that do not have detailed instructions can be used by following the directions in Using Features (p. 9) or programmed by following the instructions in Programming Buttons & Settings (p.
4 Covering Calls If you want to ... Then Have a co-worker answer your calls. See Coverage , p. 13 and Line Buttons , p. 2. Answer all of a co-worker’s calls from your telephone. Stop your calls from being covered by others. Stop your outside calls from going to your company’s See Coverage , p.
5 Headsets Headsets for MLX telephones allow one-touch operation, hands-free. Touch a button to answer a call, then touch it again to disconnect. Headsets consist of a headpiece and modular base unit. The base unit plugs into the handset jack. Use the features below to control headset operation.
6 Call Handling Making & Answering Calls First, review pp. 1–2 to find out about the buttons, lights, tones, and rings on your telephone. In this guide, instructions for using features may not include all the possible ways you can make a call. To make a call , lift handset, use a headset, or press the Speaker button.
7 Messaging Your phone system has several features that allow you to leave messages for others in your office. If you use Leave Message or Posted Messages, the person(s) for whom you are leaving a message must have a display phone.
8 Posting Messages A posted message appears on the display of any inside caller who tries to reach you as long as that person has a display phone. (You also see the message posted at your own phone as a reminder.) There may be as many as 20 messages available to you for posting.
9 Using Features There are two ways to activate a feature: • Directly, as explained below • By pressing a line button you programmed with the feature (see Programming Buttons & Settings , p. 20) Other Features To use a feature from the Feature Codes list: 1.
10 Account Codes To program: See Programming Buttons & Settings , p. 20. In some companies you enter an account code before or during a call to indicate client billing information. You may be required to enter an account code for all outside calls, or an account code may be optional for incoming and outgoing calls.
11 Authorization Codes* To program: See Programming Buttons & Settings , p. 20. This feature is useful at companies where there are telephones in public areas that are restricted from making some calls.
12 Callback & Line Request Your system has two features that you can use when an outside line or extension is busy. These features give you access to the line or extension when it becomes available.
13 Coverage To program: See Programming Buttons & Settings , p. 20. Coverage allows calls to your extension to ring elsewhere, so that they can be handled by someone else. If your system has voice mail, your calls can also be covered that way. There are three types of coverage: • Primary Coverage.
14 Extension & System Directory Check with your system manager to find out whether these directories have been programmed. The System Directory dials numbers that people in your company call often. The Extension Directory dials inside numbers. 1. Press the Menu button.
15 Often-Used Features Do Not Disturb Must be programmed on a button. To program: See Programming Buttons & Settings , p. 20. This feature prevents calls from ringing at your extension, although outside calls cause the green lights at line buttons to flash.
16 Often-Used Features Park & Pickup To program: See Programming Buttons & Settings , p. 20. Park puts a call on a special kind of hold so that it can be answered from any phone in the system. While a call is parked, use Paging to summon the co-worker who should answer.
17 Personal Speed Dial Use on MLX-10D, MLX-10DP, and MLX-16DP telephones only. For MLX-20L telephones, use Personal Directory (p. 14). For MLX-28D telephones, use programmed Auto Dial buttons (p. 11). Use this feature to program 2-digit codes that you can dial in place of frequently used numbers.
18 Voice Announce To program: See Programming Buttons & Settings , p. 20. Make voice-announced calls from ICOM Voice or SA Voice buttons on your phone (see Line Buttons , p. 2) or use Paging (p. 16). The Voice Announce feature allows you to prevent voice announcements and paging calls from interrupting you.
HOME SCHOOL TRAVEL AGNT BANK SHOW NUMBER BROOKS GARCIA CHENG COFFEE SHOP NEXT PAGE IN CONFERENCE IN CONFERENCE APR 18 12:43 Menu Home Inspct More Home Menu Inspct More APR 18 12:43 When phone is idle, shows posted message, if any .
Programming Buttons & Settings 20 If you use a feature often, you can program it onto an unused line button for easy access. If you use a feature occasionally, see Using Features , p. 9. Keep these facts in mind when setting up your telephone: • Some features must be programmed on a button or they can’t be used.
21 21 Programming Buttons & Settings Park ✻ 86 Personal Speed Dial # + (2-digit code † ) + ✻ 21 + phone number + # # + (2-digit code † ) + ✻ 21 + dial-out code + phone number + # # Picku.
22 Feature Codes Account Code Entry 82 + code + # Authorization Code Entry ● 80 + code + # Callback 55 Call W aiting pick up call waiting call ■ 87 Camp-On 57 Direct V oice Mail ● 56 Follow Me 3.
デバイスLucent Technologies MLA-28Dの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Lucent Technologies MLA-28Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLucent Technologies MLA-28Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lucent Technologies MLA-28Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lucent Technologies MLA-28Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lucent Technologies MLA-28Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLucent Technologies MLA-28Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lucent Technologies MLA-28Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLucent Technologies MLA-28Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
