Magnavoxメーカー50ME313V/F7 Aの使用説明書/サービス説明書
ページ先へ移動 of 38
Owner’s Manu al Manual del Propietario Manuel du Propriétaire 1 866 341 3738 www .magnavo x.com/support Necesita a yuda inmediata? 1 866 341 3738 www .
Contents 1 Notice ......................................................................................................................... 5 2 Important .................................................................................................
Kno w these safety symbols The lightning flash with arrowhead symbol, within an equilateral triangle , is intended to aler t the user to the presence of uninsulated “dangerous v oltage” within the apparatus’ s enclosure that may be of suff icient magnitude to constitute a risk of electric shock to per sons.
Important Safety Instructions 1. 1. Read these instr uctions. Read these instr uctions. 2. 2. Keep these instr uctions. Keep these instr uctions. 3. 3. Heed all war nings. Heed all war nings. 4. 4. Follow all instr uctions. Follow all instr uctions. 5.
1 Notice MA GNAV O X is a registered trademar k of Philips Nor th America Corpor ation and is used by Funai Electr ic Co., Ltd. and Funai Corpor ation, Inc . under license from Philips Nor th Amer ica. Funai reser ves the right to change products at any time without being obliged to adjust earlier supplies accordingly .
2 Important Positioning the TV • Lar ge screen TVs are heavy . 2 people are required to car r y and handle a large screen TV . • Make sure to hold the upper and bottom frames of the Unit fir mly as illustrated. • Install the Unit in a hor izontal and stab le position.
3 Getting Started Features ● DTV / Analog TV / CATV You can use your Remote Control to select channels which are Broadcast in Digital format and conventional Analog format.
Stand Assembly × 4 Attaching the Base You must attach the base to the Unit to have it as a table top Unit. Be sure the front and rear of the base match the proper direction.
Remote Control a i k l o m j c e g d f b h n a B (POWER) Turns the TV On from Standby or Off to Standby. b PIC/SOUND MODE Optimizes Picture and Sound quality. c 0 - 9 (NUMBER keys) Used to enter a Channel / Program number. • (DOT) : Use with 0-9 to select Digital channels.
Control Panel e d c b a f g h * When seen from the front. * Keys on Rear.Control Keys are located on the Rear side of the TV a VOL J / K Adjusts the Volume. VOL J : Volume Down VOL K : Volume Up In the Menu screen, moves the Cursor Left ( J ) / Right ( K ).
Connecting the Antenna, Cable or Satellite Be sure your Antenna or another Device is connected properly before plugging in the AC Power Cord. If connecting to an Antenna through an RF cable Any DTV Programs that are Broadcast in your area can be received for free through an Antenna Connection.
Plugging in the AC Power Cord Make sure All the Necessary Connections are made before the AC Power Cord is plugged into an AC outlet. Caution(s) ● Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltage of this Unit (120V AC).
Connecting your Devices HDMI Digital Connection HDMI Connection offers the Highest Picture quality. HDMI (High-Definition Multimedia Interface) transports high definition Digital Video and multi-channel Digital Audio through a single cable.
PC Connection HDMI Connection This Unit can be connected to your PC that has an HDMI terminal. Use an HDMI cable for this Digital Connection. IN IN IN OUT PC HDMI cable HDMI cable HDMI cable HDMI-DVI Connection This Unit can be connected to your PC that has a DVI Terminal.
These Operations are accessible by Remote Control. Some may also be accessible by the Main Unit's Control Panel. Initial Setup This section will guide you through the Unit’s Initial setting which includes selecting a Language for your On-screen Menu and Autoprogram, which Automatically scans and memorizes viewable channels.
4 Use your TV Switching on your TV and putting it in Standby mode * Key on Rear Remote Control TV To Turn the TV On from Standby or Off to Standby ● Press B on the Rear panel or the Remote Control. Note(s) ● Energy Consumption contributes to air and water pollution.
Watching Channels from an External Device Switching Each Input Mode can easily switch with the Remote Control between TV (DTV or Analog TV) and External Devices when they are connected to the Unit.
fun-Link options If you have our brand products such as Blu-ray Disc player or DVD recorder that are compatible with fun-Link functions, connect them to this Unit via an HDMI cable so you can simply operate various items from this Unit’s Remote Control.
TV Screen information You can display the currently selected channel or other information such as the aspect ratio on the TV screen. In the Digital mode, the detailed broadcasting information for the current off the air channel, such as Program title, are displayed.
5 Making more use with your TV This section describes the overview of the Main Menu displayed when you press MENU . The Main Menu consists of the function setting items below.
Picture Before you begin: You must set Home in Location . L p. 30 Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode.
Sound Before you begin: You must set Location to Home . L p. 30 Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode.
Setup Before you begin: Make sure the Unit is connected to Antenna or Cable. 1 Press MENU and use H I to select Setup , then press OK . Antenna Add channels Channel list Autoprogram USB Language Features Setup Sound Picture 2 Adjust the following items.
Add channels This function lets you add the off the air Analog TV or Analog Cable channels that were not added by the Autoprogram due to reception conditions during the Initial Setting. 1 Use H I to select Add channels , then press OK . 2 Use the NUMBER keys to enter the number of the channel you want to add, then press OK .
Cable / NTSC (Analog) TV Operation Caption service CC-1 and T-1 The primary Closed Captions and Text Services. The Closed Captions or Text is Displayed in the same Language as the Program’s Dialog (up to 4 lines of script on the TV Screen). CC-3 and T-3 Serve as the preferred Data Channels.
Child and Ratings Lock You can prevent your children from watching certain Programs or certain Channels by locking the TV Controls and by using Ratings.
Setting US Movie and TV Ratings US Movie Ratings Lock is the Rating System created by MPAA. US TV Ratings Lock has Controlled Access to Individual Programs based on their Age and Content rating. 3 Use H I to Select US movie ratings lock or US TV ratings lock , then press OK .
Canadian English or Canadian French Ratings You can select the Rating for Canadian English or Canadian French broadcasting. 3 Use H I to Select Canadian English rating or Canadian French rating , then press OK . 4 Use H I to select the Desired Rating, then press OK Repeatedly to Switch between Block and View.
fun-Link (HDMI CEC) This function allows you to operate the linked functions between our brand Devices with a fun-Link feature and this Unit connecting through an HDMI cable. You must connect this Unit to our brand fun-Link devices and be sure it's fun-Link (HDMI CEC) setting is also set to On.
Setting your Location to Home You can set the Location of your TV to Home or Retail . Choosing Home gives you full flexibility to change predefined settings for Picture and Sound.
USB Your TV is fitted with a USB Connection that enables you to view JPEG photos or watch Motion JPEG files stored on a USB Memory Stick. 1 Connect the USB Memory Stick to the USB terminal on the side of your TV. 2 Press [Home2] ( Home ) and use H I to select USB , then press OK .
6 Upgrade your TV Software MAGNAVOX continuously tries to improve its products and we strongly recommend that you Upgrade the TV Software when Upgrades are available. New Software can be our website at www.magnavox.com/support/download using the model number of your TV to find information.
7 Useful tips FAQ Question Answer My Remote Control does not work. What should I do? ● Check the Antenna or Cable Connection to the Main Unit. ● Check the Batteries on the Remote Control. ● Re-insert the Batteries with their Polarities (+/–) as indicated.
Troubleshooting If the Unit does not perform properly when operated as instructed in this Owner’s Manual, check the following Troubleshooting Tips and All Connections Once before calling for Service. Power No Power ● Make sure the AC Power Cord is plugged in.
8 Information Glossary Analog TV (NTSC) Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards. Off the air Analog TV signals are no longer being sent by major broadcasting stations in the USA. Aspect ratio The width of a TV screen relative to its height.
9 Specifications Model # 50ME313V/F7 A 46ME313V/F7 A Picture Type FHD (1920 x 1080 pixels 60Hz) Aspect Ratio 16:9 Viewing Angles 176° (V) by 176° (H) 178° (V) by 178° (H) Built-in Digital / Analog.
10 Warranty WARRANTY COVERAGE: This warranty obligation is limited to the terms as set forth below. WHO IS COVERED: This product warranty is issued to the original purchaser or the person receiving th.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501 A3AUXUH / A3AQGUH ★★★★.
デバイスMagnavox 50ME313V/F7 Aの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Magnavox 50ME313V/F7 Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMagnavox 50ME313V/F7 Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Magnavox 50ME313V/F7 Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Magnavox 50ME313V/F7 Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Magnavox 50ME313V/F7 Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMagnavox 50ME313V/F7 Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Magnavox 50ME313V/F7 Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMagnavox 50ME313V/F7 Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
