Manhattan Computer ProductsメーカーST 250の使用説明書/サービス説明書
ページ先へ移動 of 16
PLAZA MODELS ST 250 / ST 350 Digita l Satellite Receiver Instruction Manual (English) http://www.plaza - st.com ISSUE3.
2 INTR ODUCTION ..................................................................................................................................... 2 FEATURES ..........................................................................................
3 Welcome to the world of Manhattan digital satellite receiver that will make your life closer to your dream. Befo re using your new receiver, we suggest that you carefully read this manual and the following safety notice.
4 CONNECTORS AND DEFINITIONS Please do not connect the power to the re ceiver until all other connections have been made and checked. R1: AC IN (Power Cord) Connect this lead to the mains outlet (100 - 240 Volts AC, 50/60 Hz, 0.2Amps / 0.15Amps) R2: LNB IN (IF Input) Connect the IF cable from your LNB to this connector .
5 We recomme nd that you familiarize yourself with the remote control handset prior to installing the receiver. INSTALLATION For digital quality picture, connect the receiver to your TV using a fully wired SCART lead. If using the UHF TV OUT con nector then follow below step.
6 The re ceiver will automatically switch on and off at the stored times for each event. After the time has lapsed, it will reset that event to Off . On Time / Off Time: Using 0- 9 keys enter the time. STORE: After above settings move to store and press OK key SYSTEM INFORMATION This displays the software versions.
7 EXAMPLE: To configure four antennas Astra 2 (28.2E), select Antenna 1 and set DiSEqC to 1 Astra 1 (19.2E) select Antenna 2 a nd set DiSEqC to 2 Hotbird 1- 6 (13E), select Antenna 3 and set DiSEqC to 3 Thor 2, 3 (1W), select Antenna 4 and set DiSEqC to 4 12V: To select 12 volts output for relay type LNB switch.
8 €˜ TP All + D -- Selected TP for all Video, Radio and Data channels. €™ TP FTA -- Selected TP f or Free to Air Video and Radio channels. €š Manual All – Single TP for all Video and Radio channels. To select go to TP Data and press OK for sub menu.
9 CHANNEL SEARCH Go to Channel Search and configure following €¬ Search Index: Select index 1 €- Antenna: S elect reference 1 €® Satellite: Select satellite name. €¯ Search Mode: Select se arch option. €° TP Data: Select a lower band TP.
10 SORTING THE CHANNEL LIST Press Green key to sort channels alphabetically. Press Yellow key to sort channels Free To Air first followed by Scrambled. Press Red key to return to normal list. TO SELECT A CHANNEL FROM ANOTHER SATELLITE Press SAT key and t he combined channel and satellite list will appear.
11 TO SELECT SUBTITLES ON A CHANNEL Press SUB.T ( Blue ) key . S elect required language and press OK. The subtitles will appear after a few seconds. If not transmitted , it will state No Subtitles available . TO SELECT AUDIO LANGUAGE You can select an audio by pressing LANG key.
12 TO LOCK MENU AND CHANNELS ADVANCED INSTALLATION CHANNEL EDIT This section describes the use of the EDIT menu. It includes Channel, Satellite and TP edit functions. TO DELETE CHANNELS Select Delete and press OK. The cursor will move to TV channel list.
13 TO SORT SATELLITE LIST After adding a satellite select Sort and press OK. The list will be sorted by satellite positions in degrees. DELETING A TP TO DELETE A TP Select Delete and press OK, the cursor will move to TP list. Select the TP you want to delete and press OK.
14 TO RECORD PROGRAMS To sta rt recording, press REC key. The following record banner will appear. Please note that the picture will appear paused for a few seconds initially although there will be no pause in the actual recording. During recording you are actually watching the playba ck and therefore a pause is noticed before it begins.
15 TROUBLE SHOOTING GUIDE If you suspect there is a problem with yo ur receiver, please check the following trouble shooting guide before calling a Manhattan authorised service agent. WARNING! Do NOT attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric shock and will invalidat e your warranty .
16 POWER SUPPLY Type AP - 129B SMPS Input Voltage 100 -- 240 Volts AC, 50/60Hz, 0.2Amps / 0.15Amps Power Consumption Maximum 30W Protection Separate Internal Fuse Ambient Temperature Ra nge 0 – 45 Degrees C Usage This power supply is not for external use.
デバイスManhattan Computer Products ST 250の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Manhattan Computer Products ST 250をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはManhattan Computer Products ST 250の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Manhattan Computer Products ST 250の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Manhattan Computer Products ST 250で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Manhattan Computer Products ST 250を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はManhattan Computer Products ST 250の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Manhattan Computer Products ST 250に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちManhattan Computer Products ST 250デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
