MarantzメーカーR3001の使用説明書/サービス説明書
ページ先へ移動 of 43
Model SR3001 User Guide A V Surround Receiver.
ENGLISH W ARRANTY For warranty information, contact your local Marantz distributor . RET AIN Y OUR PURCHASE RECEIPT Y our purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz.
CE MARKING English The SR3001 is in conformity with the EMC directive and low-voltage directive. Français Le SR3001 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR3001 entspricht den EMC-Richtlinien und den Richtlinien für Nieders- pannungsgeräte.
Nederlands W AARSCHUWINGEN - Stel het apparaat niet bloot aan regen of vocht. - V erwijder de afdekplaat van het apparaat niet. - Duw niets door de ventilatieopeningen in het apparaat. - Raak het netsnoer niet met natte handen aan. - Bedek de ventilatieopeningen niet met enige voorwerpen, zoals tafelkleden, kranten, gordijnen, enz.
1 ENGLISH T ABLE OF CONTENTS FOREW ORD This section must be read before any connection is made to the mains supply . EQUIPMENT MAINS WORKING SETTING Y our Marantz product has been prepared to comply with the household power and safety requirements that exist in your area.
2 ENGLISH DESCRIPTION DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems. DTS brings you premium quality discrete multichannel digital sound to both movies and music. DTS is a multichannel sound system designed to create full range digital sound reproduction.
3 ENGLISH FEA TURES The SR3001 incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic II x (Movie, Music and Game), Circle Surround II (Cinema and Music).
4 ENGLISH FR ONT P ANEL This feature (Sound Injection) combines a sound from one source with a picture from another . Choose the video source fi rst, and then choose a different audio source to activate this function. r S.(Surround) SPEAKER B b utton Press this button to activate the Surround Speaker B system .
5 ENGLISH FL DISPLA Y DISP AU T O TUNED ST V – OFF NIGHT PEAK ANALOG DIGIT AL AT T SLEEP SURR AU TO DIRECT DISC 6.1 MT X 6. 1 EQ DIGITAL SURROUND PC M L C R SL S SR LFE SPKR B ¡7 ¡6 f s a ¡5 g jl ¡1 ¡3 d h ¡0 ¡2 ¡4 k ¡8 a DISP (Display Off) indicator This indicator is illuminated when the SR3001 is in the display off condition.
6 ENGLISH n DIGIT AL INPUT (Dig.1 - 3) (coaxial, optical) There are 2 digital inputs with coaxial jacks, 1 with optical jack. The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component.
7 ENGLISH m Cursor ( 1 , 2 , 3 , 4 ) / OK buttons (when AMP mode is selected) Use these button when operating the SETUP MAIN MENU. , MENU OFF button (when AMP mode is selected) This button is used to exit from the SETUP MAIN MENU.
8 ENGLISH RESETTING THE ALL CODE MENU OSD VOL. TV VOL. MAIN SLEEP MUTE AMP TUNER CD TAPE CDR/MD DVD POWER VCR1 DSS/VCR2 TV AUX1 1. ENTER TUNE/SEARCH TREBLE CHANNEL/SKIP BASS A/D P.SCAN/V-OFF 7.1CH IN STEREO MCH-ST MEMO CLEAR DISPLAY NIGHT CSII EX/ES VIRTUAL DTS PURE DIRECT AUTO 3 2 1 6 5 4 9 8 0 7 T.
9 ENGLISH OPERA TION OF REMOTE CONTROL UNIT REMOTE CONTROL The distance between the transmitter of the remote control and the IR SENSOR of the SR3001 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible.
10 ENGLISH CH.SEL LIP.SYNC PTY SUB-T/ATT AUDIO INPUT/DISC+ F.DIRECT RDS TUNE/SEARCH T-MODE TREBLE CHANNEL/SKIP BASS A/D P.SCAN/V-OFF 7.1CH IN STEREO MCH-ST MEMO CLEAR DISPLAY NIGHT CSII EX/ES VIRTUAL DTS PURE DIRECT AUTO 3 2 1 6 5 4 9 8 0 7 T.TONE MENU OFF SET UP/ MENU OSD VOL.
11 ENGLISH CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker , surround left and right speakers, surround back left and right speakers, and a subwoofer .
12 ENGLISH Caution: • Be sure to use speakers with the specifi ed impedance as shown on the rear panel of this unit. • T o prevent damage to circuitry , do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.
13 ENGLISH IN MONITOR VCR1 R SPEAKER SYSTEMS 6 - 8 OHMS CENTER R FRONT SURROUND BACK S. SPEAKER B SURROUND LL L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN 1 7.
14 ENGLISH MONITOR VCR1 R SPEAKER SYSTEMS 6 - 8 OHMS CENTER R FRONT SURROUND BACK S. SPEAKER B SURROUND LL L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN IN OUT DSS / VCR2 IN OUT CDR/MD TAPE OUT IN CD R L FM ( 75 Ω ) GND AM ANTENNA AUDIO S V OUT SUBWOOFER 7.
15 ENGLISH CONNECTING THE ANTENNA TERMINALS IN OUT MONITOR VCR1 MONITOR R SPEAKER SYSTEMS 6 - 8 OHMS CENTER R FRONT SURROUND BACK S. SPEAKER B SURROUND LL L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN Y DSS / VCR 2 DVD 3 2 1 7.
16 ENGLISH 1. INPUT SIMPLE SETUP 2. SPEAKER 3. PREFERENCE 5. DOLBY PL II 6. CS II 4. SURROUND CD TAPE CD-R TV DVD VCR1 DSS SUBW L&R CENT SL&SR SB SB SIZE LPF/HPF BASS (Subwoofer) (Front Left &.
17 ENGLISH 1. INPUT SETUP (ASSIGNABLE DIGIT AL INPUT) Four digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. The Input Setup consists of 6 items, which are as below .
18 ENGLISH 5. If you fi nish these setup, press the 3 or 4 cursor button to select “TO MAIN MENU” then press the ENTER button to return the SETUP MENU. Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU.
19 ENGLISH 2-2. SPEAKERS DIST ANCE Use this parameter to specify the distance of each speaker ’ s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room.
20 ENGLISH 1. When you select “MANUAL” in T -MODE menu by pressing the 1 or 2 button, this unit will emit a pink noise from the front left speaker . At this time, adjust the desired level of the master volume. Remember the level of this noise and then press the 4 button.
21 ENGLISH HT -EQ : Select to active the HT -EQ with the 1 or 2 cursor buttons. The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because fi lm soundtracks were designed to be played back in large movie theater environments.
22 ENGLISH MENU STRUCTURE of CS II setup TRUBASS SRS DIALOG EXIT TO MAIN MENU exit SETUP MENU 0 6 0 6 6.CS II setup 6. CS II (CIRCLE SURROUND II ) DTS PURE DIRECT AUTO T.TONE MENU OFF SET UP/ MENU OSD VOL. TV VOL. MAIN SLEEP MUTE ENTER 4. 5. 2. 5. 1. 3.
23 ENGLISH USING THE SLEEP TIMER MENU OSD VOL. TV VOL. MAIN SLEEP MUTE AMP TUNER CD TAPE CDR/MD DVD VCR1 DSS/VCR2 TV ENTER AUX1 T o program the SR3001 for automatic standby , press the SLEEP button on the remote. Each press of the button will increase the time before shut down in the following sequence.
24 ENGLISH SURR OUND MODE The SR3001 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup.
25 ENGLISH VIRTUAL This mode creates a virtualized surround sound experience from a two-speaker (front L and R) playback system playing any multichannel audio source (such as found on DVDs and digital broadcasts), including Dolby Digital, Dolby Pro Logic or DTS.
26 ENGLISH The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on SR3001 or the remote control unit. However , the sound you hear is subject to the relationship between the selected surround mode and input signal.
27 ENGLISH DISPLA Y MODE SURROUND AV SURROUND RECEIVER SR3001 R PHONES PURE SETUP DIRECT SIMPLE AUTO HT-EQ MENU ENTER DISPLAY MEMORY EXIT BAND MODE DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ANALOG DIGITAL ATT SLEEP SURR AUTO DIRECT DISC 6.1 MTX 6.
28 ENGLISH 7.1 CH INPUT The SR3001 is equipped for future expansion through the use of Multi channel SACD multichannel player or DVD-Audio player . When this is selected, the input signals connected t.
29 ENGLISH 7.1 CH INPUT LEVEL This menu is to adjust the speaker levels for 7.1- channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. DTS PURE DIRECT AUTO T.TONE MENU OFF SET UP/ MENU OSD VOL.
30 ENGLISH B ASIC OPERA TION (TUNER) LISTENING TO THE TUNER Frequency scan step for AM is selectable. Default setup is 9 kHz step, if your country’s standard is 10 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change.
31 ENGLISH (Using the remote control unit) 1. Tune into the radio station you desire (Refer to the “MANU AL TUNING ” or “A UTO TUNING” section). 2. Press the MEMO button on the remote. “ – – “ (preset number) starts blinking on the display .
32 ENGLISH RDS OPERA TION Now in use in many countries, RDS (Radio Data System) is a description of the station’s programming hidden space in the FM signal. Y our new receiver is equipped with RDS to assist in the selection of FM stations using station and network names, rather than broadcast frequencies.
33 ENGLISH SURR OUND SPEAKER B SYSTEM The Surround Speaker B system is a function which allows you to listen to the same source in a room other than the room in which the SR3001 is located. The operations possible with the Surround speaker function are explained briefl y below .
34 ENGLISH TR OUBLESHOO TING In case of trouble, check the follo wing before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user ’s guide ? 3. Are the power amplifi ers and speaker working properly ? If the unit does not operate properly , check items shown in the following table.
35 ENGLISH TECHNICAL SPECIFICA TIONS FM TUNER SECTION Frequency Range ................................. 87.5 - 108.0 MHz Usable Sensitivity ............................ IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ................... Mono/Stereo 75/70 dB Distortion .
SETUP CODES CD Aiwa .................................................................................. 0184 Burmester ......................................................................... 0447 California Audio Labs ................................
Broksonic ................................................................ 0263, 0490 Candle .............................................................................. 0057 Carnivale ................................................................
MTC ........................................................................ 0267, 0027 Multitech ........................................................................... 0027 NAD ....................................................................
www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark. 09/2006 00M23CW851310 ecmf-e Printed in China.
デバイスMarantz R3001の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Marantz R3001をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMarantz R3001の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Marantz R3001の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Marantz R3001で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Marantz R3001を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMarantz R3001の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Marantz R3001に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMarantz R3001デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。