MarantzメーカーRC1200の使用説明書/サービス説明書
ページ先へ移動 of 47
Model R RC1200 User Guide Lear ning Remote Control.
1 ENGLISH MAIN FEA TURES & FUNCTIONS ........ 2 NAMES OF PARTS & FUNCTIONS ..... 3 LO ADING B A TTERIES .......................... 8 BASIC OPERA TION .............................. 9 USE MODE ...................................................
2 ENGLISH MAIN FEATURES & FUNCTIONS • PROGRAMMABLE LEARNING FUNCTION Can easily be programmed to learn the codes for almost any other infrared-based remote, allowing the remote control functions for many different components to be consolidated conveniently in a single unit.
3 ENGLISH NAMES OF PARTS & FUNCTIONS Names of Buttons & Functions z MODE button Used to change the operation mode of the remote controller. Pressing this button cycles the remote controller through USE → LEARN → NAME → CLONE TX → CLONE RX → USE , with the currently selected mode displayed on the LCD.
4 ENGLISH , Function buttons Used to switch the remote controller to the command sets for specific sources (amplifier, receiver, etc.), thereby allowing a single remote controller to control up to 11 different components. To use these buttons to switch the amplifier’s source, press the desired button twice within 2 seconds.
5 ENGLISH ⁄4 GUIDE button Used to call up the on-screen menus used to control DVD players, digital satellite systems (DSS), and other menu-equipped systems.
6 ENGLISH A B I J D H G C E F LCD (Liquid Crystal Display) Information about currently selected functions and modes is displayed on the LCD. Pressing any buttons will call up a full display of information on the status of that function or mode.
7 ENGLISH G NAME indicator Indicates when the remote controller is in the NAME mode and a function name is being changed. H MACRO indicator Indicates when the remote controller is in the MACRO programming mode. I CURSOR indicator Indicates when the CURSOR CONTROL buttons are in the cursor mode.
8 ENGLISH LOADING BATTERIES The life of the batteries used with the remote control unit is about 6 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak. Do not use alkaline, manganese, nickel-cadmium (Ni- Cd) or other different types of batteries together.
9 ENGLISH MEMO CLEAR GUIDE MUTE 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP CD LD BASIC OPERATION USE MODE The remote controller will normally be used in the USE mode.
10 ENGLISH If it is left for approximately 1 minute without pressing any buttons, all items on the LCD will go off except the function indicator. Even if the display goes off, the remote controller will retain the status established before the display went off.
11 ENGLISH MEMO CLEAR GUIDE MUTE 1 2 3 4 5 6 7 8 0 9 DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP CH VOL OK CD DVD CD R/ MD OK MEMO CLEAR GUIDE MUTE 1 2 3 4 5 DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL LD 3.
12 ENGLISH • In the rare event that NG appears on the LCD, it means that the remote controller you are attempting to learn from uses special signals that cannot be learned by the Marantz remote controller.
13 ENGLISH PROGRAMMING THE JOG DIAL Let’s use the example of setting as the SIDE-B code for the laser disc player. 1. Use a ballpoint pen or other sharp point to press the MODE button z until the LEARN indicator is displayed and starts to blink.
14 ENGLISH MEMO CLEAR GUIDE MUTE 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD LD • If you do not wish to rewrite the name, simply press the OK Cursor button ⁄0 . • If you wish to rewrite the name, input the desired characters using the ten-key pad ⁄7 .
15 ENGLISH 4. The left-hand edge of LCD B now blinks to indicate that the character at the blinking location can now be overwritten. New characters entered will be written over the top of the current character so that the current character is erased. Use the < and > Cursor buttons ⁄0 to select the characters to be rewritten.
16 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER 7. Follow the same procedure to enter “D- A”. When finished, press the OK Cursor button ⁄0 . Pressing OK permanently fixes the newly written characters. Similarly, the function names can be overwritten by pressing the function buttons.
17 ENGLISH MEM O CLEAR GUIDE MU TE CH VOL OK 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD CLEAR OK w q ON OFF ON / OFF SOURCE MACRO MO DE LEARNING REMOTE CONTROL RC 1 200 POWER 2.
18 ENGLISH MEMO CLEAR GUIDE MUTE ENT ENT CH VOL OK 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD CLEAR ENT ENT q w CH VOL OK CD DVD CD - R/MD OK 3. Erasing Jog Dial Codes To clear all codes and names previously set for each of the functions (LD, TV, etc.
19 ENGLISH MEMO CLEAR GUIDE MUTE 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MA TRIX MOVIE 2CH OSD SLEEP CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX CLEAR q w 4. Erasing Codes by Function This procedure clears all the codes and names programmed for the LD, TV or any another function.
20 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER To go ahead with the clearing operation, release the buttons, and press the OK Cursor button ⁄0 . Once the data is cleared, the codes are either returned to their original display or left empty.
21 ENGLISH MEM O CLEAR GUIDE MU T E EN ENT CH V O OK CD DVD CD-R/ M D DSS T V VCR AM P LD TUN ER TA P E AU X AUTO DOLBY THX DTS HAL L OK LD q w 2. Press the Function button , for which you wish to program a series of operations. In this case, let’s use the example of the laser disc player.
22 ENGLISH • If, while programming, no buttons are pressed for approximately 1 minute, the remote controller will automatically return to normal mode, and no macro will be programmed in the memory. 4. When you are finished programming macros, use a ballpoint pen or other sharp point to press the MACRO button x .
23 ENGLISH MEM O CLEAR GUIDE MUTE 1 2 3 4 5 AMP LD TUN ER TA P E AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP CLEAR MEM O CLEAR GUIDE MUTE 1 2 3 4 5 6 7 8 0 9 AMP LD TUN ER TA P E AUTO DOLBY THX.
24 ENGLISH MEM O CLEAR GUIDE MUTE CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CLEAR CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX • If while editing macros no b.
25 ENGLISH MEMO CLEAR GUIDE MUTE CH VOL OK 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP OK CD 3 e q w ON OFF ON / OFF SOUR.
26 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER MEMO CLEAR GUIDE MUTE CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD LD When you are finished programming the macro, use a ballpoint pen or other sharp point to press the MACRO button x .
27 ENGLISH MEMO CLEAR GUIDE MUTE CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL CD LD 3. To set the various steps of the macro, press the following buttons in order: AMP , , POWER ON c , LD , , AMP * , , 2 (DOLBY) ⁄7 , TV * , , VIDEO (use Jog Dial m to select VIDEO and press ENT button n ) , LD * , , 3 ⁄0 .
28 ENGLISH MEM O CLEAR GUIDE MUTE CH VOL OK 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP CD CLEAR LD OK e w q CLEARING MACRO PROGRAMS The following procedure is used to erase macros you have programmed into the remote controller’s memory.
29 ENGLISH ON OFF ON /OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER ON OFF ON /OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER 5cm ON OFF ON / OFF SOURCE MACRO MODE LEARNING .
30 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER CH VOL OK OK 3. Use a ballpoint pen or other sharp point to press the MODE button z on the receiving unit to call up the CLONE and RX displays. CLONE appears at LCD A and RX at LCD B .
31 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER • Copying takes about 3 minutes to complete if the programming capacity in the sending unit is 100%. 7. When copying is completed, use a ballpoint pen or other sharp point to press the MODE button z on both remote controllers to call up the USE display.
32 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER MEM O CLEAR GUIDE MUTE 1 2 3 4 5 AMP LD TUN ER TA P E AUTO DOLBY THX DTS HALL MEM O COPY MODE In the copy mode, the preset codes or programmed codes stored in the buttons can be transferred (copied) to other keys as desired.
33 ENGLISH MEM O CLEAR GUIDE MUTE 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MA TRIX MOVIE 2CH OSD SLEEP CD LD 1 q w MEMO CLEAR GUIDE MU TE 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MA TRIX MOVIE 2CH OSD SLEEP CD DVD 1 q w 3.
34 ENGLISH ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER MEM O CLEAR GUIDE MUTE 1 2 3 4 5 6 7 8 0 9 DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2.
35 ENGLISH CD appears at LCD B , and then the 1 (DISC+) characters stop blinking and remain lighted. (The Jog Dial name is displayed.) The copy source has now been established. " CPY ← " appears at LCD A . 4. The copy destination is selected next.
36 ENGLISH MEMO CLEAR GUIDE MUTE CH VOL OK 1 2 3 4 5 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL OK MEMO w q OTHER FUNCTIONS LIGHTING BUTTON To allow easy use in a location which has been darkened for a home theater performance, for instance, this remote controller has an LCD display which lights up.
37 ENGLISH The Setup mode includes the following items, which may be accessed using the ^ and v Cursor buttons ⁄0 . • Switch destination (version) (VER) • Adjust time interval between transmissi.
38 ENGLISH MACRO: Adjusts the time interval between transmissions of macro operations When the v Cursor button ⁄0 is pressed, LCD a displays MACRO , while LCD b displays STEP . One square ( 7 ) in LCD c is equivalent to an interval of 0.5 seconds, allowing intervals of up to 5 seconds to be set.
39 ENGLISH JOG DIAL COMMAND FUNCTIONS LISTING Each of the 10 Jog Dial commands on the LCD has 5 character labels attached for pre- programmed remote commands. These commands can be used with various Marantz A/V components, or other components using the Philips RC-5 remote control language (without DSS function).
40 ENGLISH Function Command Note TV 1 A/CH alternate channel 2 100S 100's 3 VIDEO selects video 4 INFO information 5 S-PIC smart picture 6 S-SUD smart sound 7 S-CH smart channel 8 ADV advance 9 O.
41 ENGLISH Function Command Note DSS/V2 1 DISP brings up on-screen channel marker 2 PREV goes to previously se- lected channel 3 SELCT selects TV or VCR 4 AUDIO audio track selector 5 F A V favorite u.
42 ENGLISH For REST setups Function Command Note MD 1 REC recor ds pause 2 REPT selects repeat mode 3 RANDM random play 4 DISP selects display mode 5 EDIT selects edit mode 6 EJECT eject 7 LP selects SP/LP mode 8 DEL selects delete 9 ENTER selects enter 0 SYNC SYNCRO.
43 ENGLISH SPECIFICATIONS System ........ Infrared type programmable remote control Learning and transmission-capable infrared carrier frequency band ............................................ 20 t o 70 kH z Transmission infrared wavelength band ...
MEMO CLEAR GUIDE MUTE ENT ENT CH VOL OK 1 2 3 4 5 6 7 8 0 9 CD DVD CD-R/ MD DSS TV VCR AMP LD TUN ER TA P E AUX AUTO DOLBY THX DTS HALL MATRIX MOVIE 2CH OSD SLEEP ON OFF ON / OFF SOURCE MACRO MODE LEARNING REMOTE CONTROL RC 1200 POWER z ⁄8 b c x v n .
.
Printed in Japan 00/02 287W851250 (MITi) “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.
デバイスMarantz RC1200の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Marantz RC1200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMarantz RC1200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Marantz RC1200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Marantz RC1200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Marantz RC1200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMarantz RC1200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Marantz RC1200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMarantz RC1200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
