MarantzメーカーSR6300の使用説明書/サービス説明書
ページ先へ移動 of 43
Model SR6300 User Guide AV Surround Receiver R.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL .
i IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.
ii 20 . Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
AV SURROUND RECEIVER SR6300 UP SURROUND VOLUME DOWN MEMORY TUNING/PRESET MODE F/P CLEAR SLEEP S-DIRECT DIMMER MUTE A/D 6.1CH IN POWER ON/STANDBY PHONES SPEAKERS STANDBY AUX INPUT S-VIDEO VIDEO L AUDIO.
1 ENGLISH TABLE OF CONTENTS INTR ODUCTION ............................................ 2 DESCRIPTION ............................................... 2 FEA TURES .................................................... 3 FR ONT P ANEL FEA TURES ...........
2 ENGLISH INTRODUCTION Thank you for purchasing the Marantz SR6300 DTS/Dolby Digital Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR6300.
3 ENGLISH FEATURES BUILT-IN 6 CHANNEL POWER AMPLIFIER 100 watts to each of the six main channels ; the power amp section features an advanced, premium high- storage power supply capacitors, and fully discrete output stages housed in cast aluminum heat sinks .
4 ENGLISH FRONT PANEL FEATURES (SEE PAGE iii.) q POWER switch and STANDBY indicator When this switch is pressed once, the unit turns ON and display appears on the display panel.
5 ENGLISH REAR PANEL CONNEC- TIONS (SEE PAGE iii.) All connections to the rear panel should be made with the entire system powered off. To avoid errors, it is advisable to connect one cable at a time between the various components. a FM antenna terminal (75 ohms) Connect an external FM antenna with a coaxial cable, or a cable network FM source.
6 ENGLISH REMOTE CONTROLER RC7300SR NAMES AND FUNCTIONS z Infrared window Outputs and inputs an infrared control signals. x LCD (Liquid Crystal Display) Used to display information about currently selected functions. c / (open/close) button Used to open or close the door .
7 ENGLISH ¤0 EXIT button (when AMP mode is selected) Used to exit SETUP MAIN MENU or On Screen Display. ¤1 TEST button (when AMP mode is selected) Used to enter the test tone menu. ¤2 MENU/OSD button (when AMP mode is selected) When this button is pressed, the current setting are displayed on the TV monitor.
8 ENGLISH REMOTE CONTROL RANGE The distance between the transmitter of the remote control unit and the IR SENSOR of the SR6300 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.
9 ENGLISH CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround center speaker and a subwoofer.
10 ENGLISH CONNECTING SPEAKERS CONNECTING SPEAKER WIRE 1. Strip away approx. 3/8 inch (10 mm) of wire insulation. 2. Twist the bared wire ends tight to prevent short circuits. 3. Loosen the knob by turning counterclockwise. 4. Insert the bare part of the wire into the hole in the side of each terminal.
11 ENGLISH (75 Ω ) GND AM FM AUDIO CENTER REMOTE CONTROL OUT CENTER SURR. CENTER SURR. 100W MAX SWITCHED L R AC OUTLET (230V 50Hz) CENTER SURR.CENTER SURROUND FRONT TOR MONI S - VIDEO VIDEO OUT VCR2.
12 ENGLISH AUDIO REMOTE CONTROL OUT CENTER SURR. CENTER SURR. 100W MAX SWITCHED L R AC O (230V CENTER SURR.CENTER SURROUND FRONT TOR MONI S - VIDEO VIDEO OUT VCR2 DSS / VCR2 DSS / VCR1 VCR1 MONITOR VCR2 DSS / TV DVD VCR1 IN TV VCR1 DVD VCR2 DSS / IN TV VCR1 DVD VCR2 DSS / IN TAPE TAPE / MD CDR CD R L IN VCR2 DSS / VCR1 OUT R L IN / OUT DIGITAL DIG.
13 ENGLISH ADVANCED CONNECTING CONNECTING MULTI CHANNEL AUDIO SOURCE The 6.1CH INPUT jacks are for multi channel audio source such as SACD multi channel player, DVD audio player or external decoder. If you use these jacks, switch on 6.1CH INPUT and setup 6.
14 ENGLISH CONNECTING THE ANTENNA TERMINALS ASSEMBLING THE AM LOOP ANTENNA 1. Release the vinyl tie and take out the connection line. 2. Bend in the reverse direction. 3. Inserting into the hole to attach the loop antenna to the antenna stand. 4. With the antenna on top any stable surface.
15 ENGLISH SETUP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR6300 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote control unit.
16 ENGLISH INPUT SETUP (ASSIGNABLE DIGITAL INPUT) Five digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. 1. Select “ INPUT SETUP ” in SETUP MAIN MENU with or cursor button, and press the OK button.
17 ENGLISH SPEAKER DISTANCE (TIME ALIGNMENT) Use this parameter to specify the distance of each speaker ’ s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room.
18 ENGLISH PREFERENCE 1. Select “ PREFERENCE ” in SETUP MAIN MENU with or cursor button, and press the OK button. 2. To select a desired content, press or cursor button. TV AUTO: Select the TV AUTO ON/OFF function to enable or disable with or cursor button.
19 ENGLISH CS2 (CIRCLE SURROUND II) PARAMETER 1. Select “ CS2 ” in SETUP MAIN MENU with or cursor button, and press the OK button. 2. To Select desired contents as below, press or cursor button TRUBASS: Set the TRUBASS level between 0 and 6 level in 1 level interval with or cursor button.
20 ENGLISH BASIC OPERATION LISTENING TO THE TUNER MANUAL TUNING 1. To select the tuner as the source, press the TUNER button t on the front panel or press the TUNER button ⁄9 on the remote. 2. Press the TUNER button t on the front panel or press the TUNER button ⁄9 on the remote to select the desired frequency band if required.
21 ENGLISH STATION NAME PRESET (On PRESET display mode) The station name preset function allows the name of each preset channel to be entered using alphanumeric characters. The Station Name button is valid only in the tuner mode. Before station name preset operation, store stations with the preset memory operation.
22 ENGLISH SETTING THE SLEEP TIMER Set the sleep timer while the power is turned on. 1. Turn the power ON and press the SLEEP button o / ‹2 . 2. Press the SLEEP button o / ‹2 the number of times to set the desired sleep time in minutes.
23 ENGLISH ON SCREEN DISPLAY INFOMATION The on-screen display, which can be activated by the Main unit or remote, appears on the TV screen to show the current setting status of the SR6300. 1. GENERAL INFORMATION When the MENU/OSD button ¤2 is pressed, the current setting are displayed on the TV monitor.
24 ENGLISH CONTROLLING MARANTZ COMPONENTS 1. Press the desired function button ⁄9 . • The selected function name and USE are displayed in LCD. 2. Press the desired operation buttons to play the selected component. • For details, refer to the components ’ s user guide.
25 ENGLISH CONTROLLING A MARANTZ CD PLAYER (CD MODE) CONTROLLING A MARANTZ CD RECORDER (CDR MODE) CONTROLLING A MARANTZ MD DECK (MD MODE) CONTROLLING A MARANTZ TAPE DECK (TAPE MODE) POWER ON/OFF Turns.
26 ENGLISH LEARN MODE The remote controller is capable of learning and memorizing the remote control codes used by almost any other remote controller you may already own. • If no commands have been programmed for a particular function button, the remote controller will transmit whatever codes have been factory preset.
27 ENGLISH Erasing the all functions 1. Press and hold down the T.MODE ⁄1 and MEMO ¤6 buttons until LEARN is displayed in the display. 2. Press and hold down the CL . button and press POWER ON ‹4 and POWER OFF ‹4 button. • A-CLR and LEARN are blinking.
28 ENGLISH EDITING MACROS Macros may be edited using following procedure. 1. Press and hold the T.MODE ⁄1 and MENU button ¤2 until the MACRO is displayed on the LCD. • LEARN and MACRO is displayed blinking. 2. Press the Function button ⁄9 to be changed.
29 ENGLISH Example 2 Turn the main amplifier ON → Change the amplifier ’ s input source to DVD → Set the Surround mode to VIRTUAL → Set the DVD player to PLAY 1. Press and hold the T.MODE ⁄1 and MENU button ¤2 until the MACRO is displayed on the LCD.
30 ENGLISH ADJUSTING THE INTERVAL TIME OF MACRO OPERATIONS TRANSMITTING 1. Press and hold the T.MODE ⁄1 and SETUP button ⁄7 until the SETUP is displayed on the LCD. • SETUP is displayed for 3 seconds 2. Confirm the display changes from SETUP to MCRxx .
31 ENGLISH SURROUND MODE The SR6300 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup.
32 ENGLISH VIRTUAL This mode creates a virtualized surround sound experience from a two-speaker (front L and R) playback system playing any multi- channel audio source (such as found on DVDs and digital broadcasts), including Dolby Digital, , Dolby Pro Logic or DTS.
33 ENGLISH SURROUND INPUT SIGNAL OUTPUT CHANNELS F L U O R E S C E N T I N D I C A T O R MODE L/R C SL/SR SC SW FORMAT STATUS & SURROUND MODE TEMPORARY DISPLAY STATUS AUTO DOLBY DIGITAL(5.
34 ENGLISH SURROUND INPUT SIGNAL OUTPUT CHANNELS F L U O R E S C E N T I N D I C ATOR MODE L/R C SL/SR SC SW FORMAT STATUS & SURROUND MODE TEMPORARY DISPLAY STATUS CS2 CINEMA DOLBY DIGITAL(5.1CH) - - - - - CS2 MUSIC DOLBY DIGITAL(2CH) - - - - - CS2 MONO DOLBY DIGITAL(2CH:Lt/Rt) - - - - - DOLBY DIGITAL EX(6.
35 ENGLISH CAUSE The power plug is not connected. Mute is on. The input cable is not connected correctly. The master volume control is turned all the way down. The function selector position is wrong. The headphones are connected to the headphone jack.
36 ENGLISH GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits.
37 ENGLISH TECHNICAL SPECIFICATIONS (27 mm) 14-7/8 ins. (378 mm) 16-3/4 ins.(425 mm) 20 mm 164 mm 6-7/16 ins. 14 mm 150 mm 1-1/16 ins. 13/16 ins. 9/16 ins. 5-7/8 ins. 17-5/16 ins. (440 mm) FM TUNER SECTION Frequency Range .............................
Printed in China COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA QualiFi Pty.
デバイスMarantz SR6300の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Marantz SR6300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMarantz SR6300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Marantz SR6300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Marantz SR6300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Marantz SR6300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMarantz SR6300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Marantz SR6300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMarantz SR6300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。