Marvel Industriesメーカー61ARMBBORの使用説明書/サービス説明書
ページ先へ移動 of 20
Installation Operation and Maintenance Instructions R efrigerator Models 30ARM 61ARM 3O ARM 6O ARM 6AD AM MARVEL.
1 T ABLE OF CONTENTS Unpacking your refrigerator ........................ ......... ..2 Removing the packaging...................... ............ ..2 W arranty Registration..................... ................. ....2 Installing your refrigerator ....
UNP A CKING Y OUR REFRIGERA T OR 2 Remove P ackaging Y our refrigerator has been packed for shipment with all parts that could be damaged by movement securely fastened. Cut the banding material at the bottom of the carton, unfold the carton at the bottom and remove the carton from the appliance.
INST ALLING Y OUR REFRIGERA T OR 3 Figure 2 Do not splash or spray water from a hose on the re- • frigerator! Doing so may cause an electrical shock, which may result in severe injury or death. This unit should not, under any circumstances, be • ungrounded.
4 USING Y OUR MicroSentry ™ REFRIGERA T OR CONTROL Figure 3 Control Door Switch During initial startup, or anytime power is interrupted, there will be an approximate 5 minute delay before the refrigerator starts.
5 USING Y OUR MicroSentry ™ REFRIGERA T OR CONTROL Alarm Mute Press any key to mute the audible portion of an alarm,. NO TE- This action will only mute the alarm. If the condition that caused the alarm continues, the alarm code will contin- ue to flash and will sound for 20 seconds every 60 minutes.
DIMENSIONS FOR MODELS 30ARM & 3O ARM 14-7/8” (37.78 cm) 21-3/16” (53.82 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 23-9/32” (59.13 cm) 25-7/32” (64.06 cm) 37-5/32” (94.39 cm) 16-9/16” (42.06 cm) 6 * Depth dimension may vary depending on each individual installation.
DIMENSIONS FOR MODELS 30ARM WITH O VERLA Y DOOR 14-7/8” (37.78 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 37-5/32” (94.39 cm) 23-1/4” (59.06 cm) 22-17/32” (57.23 cm) 21-3/16” (53.82 cm) * Depth dimension may vary depending on each individual installation.
8 R ecommended R ough in Opening Dimensions, Models 6O ARM & 61ARM *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 34-1/2” (87.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max.
R ecommended R ough in Opening Dimensions, Model 61ARM Overlay Door *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 34-1/2” (87.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max.
10 *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 32-1/2” (82.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required.
*24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 32-1/2” (82.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required.
12 FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 1: V erify door alignment The door should be parallel to the sides and top of the refrigerator . If alignment is necessary the door may be adjusted by loosening the 2 screws which secure the hinge adapter brackets to the door and adjusting the door side to side.
FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 6: Drill holes in overlay panel Remove the hinge adapter bushings from the top and bottom door hinge adapters. (See Figure 8).Using the holes in the hinge adapters drill 5/16” (8mm) diameter clearance holes into the overlay panels 3/4” (20mm) deep.
14 FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 9: Secure overlay panel to the door . With the #8 wood screws provided fasten the overlay panel to the door . (See Figure 7). Step 10: Install lock cam (Models with locks only). Attach the lock cam to the back of the lock assembly with the phillips head machine screw provided.
Condenser Air Flow The machine compartment located beneath the cabinet does not require frequent cleaning; however , satisfactory performance depends on adequate ventilation. Be sure nothing obstructs the required air flow openings in front of the cabinet.
16 TROUBLESHOO TING Y OUR REFRIGERA T OR Problem P ossible Cause Remedy Unit not cold enough Adjust temperatures (See “Set the de- sired temperature” on page 13) Control set too warm • Airflow to front grille blocked. • Excessive usage or prolonged door • openings.
P arts or Service Not Supplied or Designated by Marvel The above warranties also do not apply if: The original bill of sale, deliver date, or serial number • cannot be verified. Defective parts are not returned for inspection if so • requested by Marvel.
18 APPENDIX A , ADDITIONAL MicroSentry ™ FEA TURES Information Menu: The following features are available on the Information Menu. • CurrentT emperature • MaximumStoredT emperatur.
All specifications and product designs subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, replacements or compensation for previously purchased products. www .marvelrefrigeration.
デバイスMarvel Industries 61ARMBBORの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Marvel Industries 61ARMBBORをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMarvel Industries 61ARMBBORの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Marvel Industries 61ARMBBORの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Marvel Industries 61ARMBBORで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Marvel Industries 61ARMBBORを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMarvel Industries 61ARMBBORの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Marvel Industries 61ARMBBORに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMarvel Industries 61ARMBBORデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
