Maxon TelecomメーカーSP-300 Series Synthesized Scanning Radioの使用説明書/サービス説明書
ページ先へ移動 of 16
Operating Instructions SP - 300 Series Synthesized Scanning R adio (Models SP-310, SP-320, SP-330 & SP-340).
About Your SP-300 Series Radio Maxon's SP-300 Series radios feature 4 / 16 channel operation with superior performance and reliability. Operation and functions for Maxon's SP-300 Series radios are described in this manual. We urge you to thoroughly read this manual before operating the radio.
Table of Contents Safety Information..................................................................... Unpacking Information............................................................ SP-300 Series Features.........................................
Safety Information The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromag- netic energy emitted by FCC regulated equipment.
Unpacking Information Remove and carefully inspect the contents of your package(s) for the following items: Radio Battery Pack Antenna Spring Belt Clip Operating Instructions If any items are missing, please contact your Dealer or Maxon.
4 23 4 5 6 7 8 9 10 1 Description of Radio Components Front view: 1) Antenna Receptacle 2) Channel Selector Knob 3) On/Off - Volume Control 4) Busy/TX/BT Indicator (top plate of radio) 5) Accessory Co.
Antenna Installation Attach the antenna by turning clockwise into the antenna receptacle on top of the radio. Installing and Removing the Battery Pack Hold the radio face down in your hand. To attach the battery pack, pick up the pack by the sides and hold it so that the latch is facing upward.
6 Battery Charging and Care To ensure maximum performance from your radio, the battery pack must be fully charged before initial use. For continued performance, periodically discharge the battery completely and then fully recharge the pack. Proper care and charging will extend life of your battery pack.
7 NOTE: Federal Communications Commission Rules and Regulations require that you monitor a channel for activity before transmitting. NOTE: The tri-color LED located on the top panel can help with channel monitoring.
Status Indicators and Audible Alert Tones Your SP-300 Series has a sophisticated microprocessor control which provides a series of audible alert tones. Upon initial power up, a quick melody indicates that the self-test of the microprocessor functions has been completed satisfactorily.
Scan Modes Scanning is a Dealer programmable feature that allows you to monitor a number of channels. Your Dealer will help you define a channel "scan list" to be programmed into a scan channel (any channel, 1- 4 on models SP-310 or 320) or (any channel, 1-16 on models SP-330 or SP-340).
10 Other Scanning Features • Look Back: Any channel, when not in the scan mode, can be programmed to "look back" at the "Priority" channel.
Licensing and Service Information FCC Licensing The Federal Communications Commission requires that the operator of this radio be properly licensed under the applicable Part and / or Parts of the FCC Rules and Regulations. Consult with your Maxon Dealer, or contact the nearest FCC Field Office for information about obtaining a license.
12 Software Copyrights The Maxon product(s) described in these operating instructions may include copyrighted Maxon software programs stored in semi- conductor memories or other media.
Limited Warranty Topaz3 warrants the Products and included accessories sold herein will be free from defects in workmanship or materials under normal use and service for a period of two (2) years from the date of purchase by the original end user, provided that the buyer has complied with the requirements stated herein.
For more information, contact: Topaz3, LLC 10828 NW Air World Drive Kansas City, Missouri 64153 (Within USA) Phone: 1-800-821-7848, Ext. 399 (Outside USA) Phone: 1-816-891-6320, Ext.
デバイスMaxon Telecom SP-300 Series Synthesized Scanning Radioの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Maxon Telecom SP-300 Series Synthesized Scanning Radioをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMaxon Telecom SP-300 Series Synthesized Scanning Radioの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Maxon Telecom SP-300 Series Synthesized Scanning Radioの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Maxon Telecom SP-300 Series Synthesized Scanning Radioで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Maxon Telecom SP-300 Series Synthesized Scanning Radioを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMaxon Telecom SP-300 Series Synthesized Scanning Radioの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Maxon Telecom SP-300 Series Synthesized Scanning Radioに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMaxon Telecom SP-300 Series Synthesized Scanning Radioデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
