MemorexメーカーMX7300の使用説明書/サービス説明書
ページ先へ移動 of 19
Befor e operating this pr oduct, please r ead these instructions completely . User’ s Guide Home Audio System with CD Player and AM/FM Stereo Radio MX7300.
1 Dear Customer, Please read this manual thoroughly before ope rat ing the unit to become more familiar with it and obtain the performance that will bring you continued enjoyment for many years.
2 Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1.
SPEAKER CONNECTION 1. Place the speakers in convenient locations on either side of the unit or connect them to the unit as described below. 2. Locate the Speaker Jacks on the sides of the unit and connect the right speaker to the Right Speaker jack and the left speaker to the Left Speaker jack.
4 PREP ARA TION FOR USE (CONTINUED) BA TTER Y OPERA TION FOR REMOTE The battery compartment is located on the bottom of the remote control. • Remove the battery compartment door by pushing the tab to the left (arrow 1) and then pulling the battery compartment down (arrow 2).
5 LOCA TION OF CONTROLS 2 4 6 5 8 9 10 11 7 1 3 12 13 15 14 16 17 18 19 20 21 1. AUX Jack 2. Headphones Jack 3. ON/ST ANDBY Button 4. Display 5. PLA Y/P AUSE ( ®p ) Button 6. T une/Skip/Search o Button 7. VOL. UP Button 8. VOL. DOWN Button 9. AUX Function Button 10.
6 LOCA TION OF CONTROLS (CONTINUED) 2 4 1 6 7 8 5 10 9 15 16 17 18 19 20 14 31 1 12 13 13 2 46 5 79 8 0 1. TUNER/BAND Function Button 2. AUX Function Button 3. Number Buttons 4. MEMORY Button 5. PLA Y/P AUSE ( ®p ) Button 6. DISPLA Y Button 7. INTRO Button 8.
7 OPERA TING INSTRUCTIONS With the power on, press the EQ button on the remote control to cycle through the preset EQ settings. Each press of the EQ button will cycle as follows: JAZZ, POP, CLASSIC, FLAT.
8 OPERA TING INSTRUCTIONS (CONTINUED) Press the ON/STANDBY button to turn the unit on; the IR/Standby indicator will turn off. 1 MANUAL TUNING: Repeatedly press the Tune/Skip/Search n 1 or o 2 button to manually advance the frequency in the display up or down until the desired frequency appears.
9 OPERA TING INSTRUCTIONS (CONTINUED) Press the ON/STANDBY button to turn the unit on; the IR/Standby indicator will turn off. 1 Press the MEMORY button 1 ; the preset number will blink in the display. Within three seconds, press the REPEAT/MEM Up button 2 or RANDOM/MEM Down button 3 until the desired memory number appears on the display.
10 Press the ON/STANDBY button to turn the unit on; the IR/Standby indicator will turn off. 1 The unit will start to play back automatically. If it does not start playing automatically, p ress the PLAY/PAUSE ( ®p ) button to begin playback on Track 1 .
11 While in the stop mode, press either the Tune/Skip/ Search n 1 or o 2 button to select a specific track for playback. 1 2 1 Press the PLAY/PAUSE ( ®p ) button.
12 To repeat all of the tracks on a disc continuously, first pre ss th e PLAY/PAUSE ( ®p ) button 1 to begin playback. Press the REPEAT/MEM Up button 2 once; “REPEAT” will light solid in the display and the CD will repeat all the tracks continuously.
13 Pre ss the Tune/Skip/Search n 1 or o 2 button to select the first track that you wish to program. When the desired track number appears in the display, press the MEMORY button 3 again. 0 2 3 1 4 Press either t he Tune/Skip/Search n 1 or o 2 but ton to select the next track you wish to program.
14 To play the tracks on the CD in a random order, while in the Stop mode, press the RANDOM/MEM Down button on the remote. “RAND” will appear in the display. 1 Press the PLAY/PAUSE ( ®p ) button. The unit will randomly play each track on the CD and then stop.
Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the co m pa ct disc label.
16 Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly for Retune the AM or FM broadcast on radio broadcasts. AM or FM. station. Unit is not positioned correctly. Rotate unit for best reception. F M S t e r e o i s s e l e c t e d .
REMOTE SECTION Power Source .....................................................................................................DC IN 12V Speakers .......................................................................................................
Memcorp, Inc. Weston, FL Printed in Hong Kong V isit our website at www .memorexelectronics.com.
デバイスMemorex MX7300の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Memorex MX7300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMemorex MX7300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Memorex MX7300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Memorex MX7300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Memorex MX7300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMemorex MX7300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Memorex MX7300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMemorex MX7300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。