Meridian Audioメーカー808.2Iの使用説明書/サービス説明書
ページ先へ移動 of 38
808.2/808.2i Signature Reference CD Player User Guide.
ii Preface Important safety instructions Read the instructions. Keep these instructions. Follow all instructions. Do not use this apparatus near water . Clean only with a dry cloth. Install only in accordance with the manufacturer’ s instructions. Refer all servicing to approved service personnel.
iii Contents C ontents Introduction 1 The 808.2 Signature Reference CD Player 2 Specifications 3 Using the 808.2 Signature Reference CD Player 5 Front panel keys 6 MSR+ keys 7 Switching on and off 8 P.
iv Preface C opyright and acknowledgements Sales and service in the UK Meridian Audio Ltd Latham Road Huntingdon Cambridgeshire PE29 6YE England T el (01480) 445678 Fax (01480) 445686 Sales and service in the USA Meridian America Inc 8055 T roon Circle Suite C Austell GA30168-7849 USA T el (404) 344 7111 Fax (404) 346 7111 http://www .
1 Introduction Introduction W elcome to the Meridian 808.2 Signature Reference CD Player . This User Guide provides full information about using the CD player in conjunction with your other equipment, to achieve the superb results you can expect from it.
2 Introduction The 808.2 Signature Reference CD Player The 808.2 Signature Reference CD Player takes Compact Disc playback to an entirely new level, with a heritage that includes the multiple award winning 508 and 800, and two dozen optical disc players from 1984 to the present day .
3 Introduction Specifications Drive Internal CD/DVD-ROM drive. Audio in and out The 808.2 is supplied as standard with: 2-channel balanced audio output. 2-channel unbalanced audio output. 2-channel digital coax output. 2-channel Meridian SpeakerLink output.
4 Introduction.
5 Using the 808.2 Signature Reference CD Player Using the 808.2 Signature Reference CD Player This chapter provides a summary of the functions of the 808.
6 Using the 808.2 Signature Reference CD Player F ront panel keys Eq Repeat Phase- Off Signature Reference CD Player 808.2 Volume Volume Mute Store Clear Display Repeat Source Clear Clears a track sel.
7 Using the 808.2 Signature Reference CD Player MSR+ keys 1 Open Open Audio Audio CD 1 4 7 Function Function RADIO 2 5 8 0 DVD 3 6 9 AUX DISC Return Record Record TAPE Enter TV Menu Setup Setup CABLE .
8 Using the 808.2 Signature Reference CD Player Switching on and off When not playing, the CD player should be left in the standby state. This uses a minimal amount of electricity , but ensures that the components of the CD player operate at maximum efficiency from the moment you start.
9 Using the 808.2 Signature Reference CD Player Playing a disc The compact disc player allows you to play an entire disc, or start playing from any track. While a disc is playing you can go back to the start of the track or skip to the start of the next track.
10 Using the 808.2 Signature Reference CD Player Stopping and pausing play Y ou can pause a disc while keeping it spinning, so that you can resume play instantly . T o stop playback Press * (front panel or remote). The display will show the total number of tracks on the disc.
11 Using the 808.2 Signature Reference CD Player Repeat Y ou can choose to play a track, disc, or selection repeatedly , so that when it has played it will start again from the beginning.
12 Using the 808.2 Signature Reference CD Player The scan controls allow you to move quickly to any position on the disc at either twice or eight times normal speed. T o scan through a disc Press ˘ or ¯ (remote or under the front panel) to select twice normal speed.
13 Using the 808.2 Signature Reference CD Player Programming a selection Y ou can programme a selection of tracks and then play only the tracks you have programmed. Y ou can programme a selection either by storing the tracks you want to play , or by clearing the tracks you do not want to play .
14 Using the 808.2 Signature Reference CD Player Changing the absolute phase Y ou can use the remote to invert the absolute phase of the analogue output signal, which in some circumstances can give a noticeable improvement in realism. T o display the phase setting Press Phase ( Function = on the remote).
15 Using the 808.2 Signature Reference CD Player Changing the front-panel display The 808.2 Signature Reference CD Player displays information about the current disc and settings on the 20-character front-panel display .
16 Using the 808.2 Signature Reference CD Player.
17 Using the CD player preamplifier features Using the CD player preamplifier features The 808.2i version of the 808.2 Signature Reference CD Player includes a preamplifier , and can act as the controller for up to 11 other sources. Both model s fea ture an op tion al volu me contro l for the analogue i nputs .
18 Using the CD player preamplifier features Selecting a source If you are using the 808.2i Signature Reference CD Player as a controller you can connect up to 11 other sources to it, and select them from the front panel or remote.
19 Using the CD player preamplifier features Adjusting the system volume The 808.2 Signature Reference CD Player provides an optional volume control on the analogue outputs, enabling it to drive amplifiers or active loudspeakers directly , and you can adjust the volume using the front panel or remote.
20 Using the CD player preamplifier features Changing the balance T o change the balance Press < or > (remote) until the display shows the current balance. For example: CD Balance <0> Press A or V (remote) to move the listening position. The display shows the direction and position of the listening position.
21 Installing the CD player Installing the CD player This chapter explains how to install the 808.2 Signature Reference CD player . It describes what you should find when you unpack the product, and how you should connect it to the other equipment in the system.
22 Installing the CD player Unpacking The 808.2 Signature Reference CD Player is supplied with the following accessories: MSR+ remote control with batteries, manual, and spare key caps. Meridian Comms lead. Power cord. This manual. If any of these items are missing please contact your dealer .
23 Installing the CD player Audio outputs Use this output T o connect to this BALANCED OUT The balanced analogue inputs of a preamplifier , or a power amplifier such as the G57, using XLR leads. ANALOGUE OUT The unbalanced analogue inputs of a preamplifier , or a power amplifier such as the G57, using analogue phono leads.
24 Installing the CD player Applications T o connect to an analogue preamplifier (T ype 1 or 2) Meridian Comms lead Phono leads ANALOGUE OUT MERIDIAN COMMS G01/G51 MERIDIAN COMMS ANALOGUE IN A2 Meridian 808.2 CD Player Connect the balanced or unbalanced analogue outputs to the appropriate inputs on the preamplifier .
25 Installing the CD player T o connect to two-channel DSP loudspeakers using SpeakerLink (T ype 1 or 2) T ype 1 or 2) MERIDIAN SPEAKERLINK DSP loudspeaker – Slave Meridian 808.
26 Installing the CD player T o connect to two-channel DSP loudspeakers using the digital and Comms connections (T ype 1 or 2) T ype 1 or 2) DSP loudspeaker – Slave Meridian 808.
27 Installing the CD player T o connect the 808.2/808.2i to a power amplifier (T ype 0 or 3) T ype 0 or 3) G56/G57 Power Amplifier Speaker Speaker OUTPUTS ANALOGUE IN INPUTS ANALOGUE IN INPUTS ANALOGUE OUT Meridian 808.2 CD Player Phono leads The 808.
28 Installing the CD player T o connect to other Meridian G Series or 800 Series equipment G Series, 500 Series, or 800 Series unit MERIDIAN COMMS Meridian Comms lead MERIDIAN COMMS Meridian 808.
29 Configuring the CD player C onfiguring the CD player This chapter explains how to set up the 808.2 Signature Reference CD Player for most standard configurations of your other equipment, using just the front-panel controls and MSR+.
30 Configuring the CD player Choosing a standard setting The CD player provides several sets of standard settings, called T ypes, which configure all aspects of the 808.
31 Configuring the CD player Setting up sources This section explains how to use Gain mode to set up the analogue sources connected to the CD player . T o turn on Gain mode Put the CD player into standby by pressing Off (front panel or remote). Press and hold the V olume V key under the front panel for at least five seconds.
32 Configuring the CD player.
33 Index Index A absolute phase 14 accessories 22 automatic setup 27 auxiliary output 22 B back panel connections 22 balance, changing 20 balanced outputs 22 brightness, front-panel display 15 C clip .
34 Index U unpacking 22 V volume, adjusting 19.
デバイスMeridian Audio 808.2Iの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Meridian Audio 808.2Iをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMeridian Audio 808.2Iの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Meridian Audio 808.2Iの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Meridian Audio 808.2Iで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Meridian Audio 808.2Iを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMeridian Audio 808.2Iの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Meridian Audio 808.2Iに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMeridian Audio 808.2Iデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
