Metrologic InstrumentsメーカーMS5100の使用説明書/サービス説明書
ページ先へ移動 of 40
.
.
ii L OCATIONS C ORPORATE H EADQUARTERS North America Metrologic Instru ments, Inc. Customer Servic e: 1-800-ID-METRO 90 Coles Road Tel: 856-228- 8100 Blackwood, NJ 0801 2-4683 Fax: 856-228-66 73 Email: info@metrologic.
iii T ABLE OF C ONTENTS Introducti on........................................................................................................... 1 Accessories and Supplies ...............................................................................
1 I NTRODUCTION The MS5145 Eclipse is a singl e-line, hand-held laser scanne r. Equipped with Metrologic’s patented CodeGate technol ogy, Eclipse can be used in a wide variety of applications. Cod eGate technology allows the user to easily target the desired bar cod e and complete the data transmission with a simple press of a button.
2 A CCESSORIES AN D S UPPLIES The following is a list of parts that ma y or may not be included in the MS514 5 kit. • Eclipse MS5145 Single-Line Las er Scanner • AC to DC Power Transformer – Regulated 5.
3 Q UICK S TART 1. Connect the 10-pin RJ45 plug into the j ack on the Eclipse MS5145. You will hear a ‘click’ when the connectio n is made. 2. Connect the L-shaped plug of the po wer supply into the power jack on the PowerLink cable. 3. Connect the power supply into an AC o utlet.
4 S TANDARD RS232 S CANNER I NSTALLATION 1. Turn off the host system. 2. Connect the 10-pin RJ45 plug of t he Po werLink cable into the jack on the MS5145 RS232 scanner. Note: If the MS5145 is receiving power from the host system, skip to step #5. (See caution statement below*) 3.
5 K EYBOARD W EDG E S CANNER I NSTALLATION 1. Turn off the host system. 2. Connect the 10-pin RJ45 plug of t he Po werLink cable into the jack on the MS5145.
6 K EYBOARD W EDG E I NSTALLATION ( CONTINUED ) Manufacturer’s Recommendation If the keyboard port of the host system cannot supply enough current, the use of an external power supply with the MS5145 Keybo ard W ed ge wil l be necessary.
7 USB SCANNER I NSTALLATION 1. Connect the 10-pin RJ45 plug of t he Po werLink cable into the jack on the MS5145 USB scanner. Note: The MS5145 USB scanner will receive power directly fro m the host system; no external power supply is required. 2. Connect the USB connector of the Powe rLink cable into the USB port of the host system.
8 D ISCONNECTING THE P OWER L INK C ABLE F ROM THE S CANNER Before removing the cable from the sca nner, Metrologic recomme nds that the power on the host system is off and the power supply has been discon nected from the PowerLink cable. 1. Locate the small ‘pin-hole’ on the back of the scanner.
9 S CANNER P ARTS 1. Green & Red LEDs The MS5145’s laser pulses on an d off when no bar code is presented, and stays on when it senses a bar code. The green LED remains o n dur ing normal pulse and scanning ope ration, and it blinks during power sav e mode.
10 A UDIBLE I NDICATORS When the MS5145 scanner is operatio nal, it provides audible feedback. T hese sounds indicate the status of the scann er. Eight settings are availa ble for the tone of the beep (normal, 6 alternate tones and n o tone). T o change the tone, refer to the Configuration Guide.
11 V ISUAL I NDICATO RS There is a red LED and a green LE D on the MS5145. When the scanner is on, the activity of the LEDs indicates the st atus of the current scan and the scanner. Green and Red LEDs are off The LEDs will not be illuminated if the scanner is not receiving power from the host or transformer.
12 F AILURE M ODES One Razzberry Tone on Po wer-up This indicates the scanner has experi enced a laser or flipper subsystem failure. Return the un it for repair to a Metrologic Authorized Service Center.
13 S CAN A REA Minimum Bar Code Element Width ABCDE F mm .10 .12 .17 .26 .33 .66 mils 4.1 4.8 6.8 10.4 13 26.
14 L ABELS Each scanner has one label on the unders ide of the unit. This label has the model number, date of manufacture, serial number, laser and caution information. The follo wing is an e xample of this l abel. Patent Information-See Manual FCC and ICES-003 Information-See Manua l Warranty VOID if case opened.
15 T ROUBLESHOOTING G UIDE The following guide is for referenc e purp oses only . Contact a Metrologic representative to preserve the limite d warranty terms on page 31. S YMPTOM S P OSSIBLE C AUS E ( S )S OLUTION No LEDs, beep or laser line No power is being supplied to the scanner Check transformer, outlet and power strip.
16 T ROUBLESHOOTING G UIDE ( CONTINUED ) S YMPTOM S P OSSIBLE C AUS E ( S )S OLUTION The unit powers up, but does not scan Scanning a particular symbology that is not enabled UPC/EAN, Code 39, Interleaved 2 of 5, Code 93, Code 128 and Codabar are enabled by default.
17 T ROUBLESHOOTING G UIDE ( CONTINUED ) S YMPTOM S P OSSIBLE C AUS E ( S )S OLUTION Scanner beeps at some bar codes and NOT for others of the same bar code symbology The bar code may have been printed incorrectl y Check if it is a check digit/character/or border problem.
18 T ROUBLESHOOTING G UIDE ( CONTINUED ) S YMPTOM S P OSSIBLE C AUS E ( S )S OLUTION The unit is not transmitting each character (Keyboard Wedge) Configuration is not correct Increase interscan code delay setting. Adjust whether the F0 break is transmitted.
19 RS-232 D EMONSTRATION P ROGRAM If an RS-232 scanner is not communicating with your IBM compatible PC, key in the following BASIC program to test that the communication port and scanner are working.
20 A PPENDIX A Specifications O PERATIONAL Light Source Visible Laser Diode 650 nm ± 1 0 nm Laser Power (peak) <1.0 mW Depth of Scan Field (for 13mil at Default) 0 mm – 140 mm (0” – 5.5”) Scan Speed 72 ± 2 scan lines per second Scan Pattern Single scan line Minimum Bar Width 0.
21 A PPENDIX A ( CONTINUED ) E LECTRICAL Input Voltage 5 VDC ± 0.25 V Power - Operating 0.675 mW Current - Operating 135 mA peak @ 5 VDC DC Transformers Class 2; 5.
22 A PPENDIX B Default Settings Many functions of the scanner can be “progra mmed” – that is, enabled o r disabled. The scanner is shipped from the factory programmed to a set of default conditions. The default parameter of the scanner has an asterisk (*) in the charts on the following pages.
23 A PPENDIX B ( CONTINUED ) Parameter Default OCIA RS232 Light Pen IBM 46XX KBW USB Paraf Support ITF 9 9 9999 ITF Symbol Lengths Variable 9 9 9999 Minimum Symbol Length 3 9 9 9999 Symbol Length Lock.
24 A PPENDIX B ( CONTINUED ) Parameter Default OCIA RS232 Light Pen IBM 46XX KBW USB Inter-character delay Programmable in 1 msec steps (max 255 msecs) 1 msecs 10 msecs in KBW 9 9 999 Transmit UPC-A c.
25 A PPENDIX B ( CONTINUED ) Parameter Default OCIA RS232 Light Pen IBM 46XX KBW USB Carriage Return * 99 9 Line Feed-Disabled by def ault in KBW * 99 Tab Prefix 99 Tab Suffix 99 “C” prefix 99 “.
26 A PPENDIX B (C ONTINUED ) Parameter Default OCIA RS232 Light Pen IBM 46XX KBW USB Coupon Code 128 99 As Code 39 999 Programmable Code Lengths 7 avail 9 9 9999 Programmable Suffix Characters 10 avai.
27 A PPENDIX C Scanner Pinout Connections MS5145-41 (RS-232C & LTPN) Pin Function 1 Ground 2 RS-232 Transmit Output 3 RS-232 Receive Input.
28 A PPENDIX C ( CONTINUED ) MS5145-37 (USB/KBW) Pin Function 1 Ground 2D - 3D + 4 PC DATA 5 PC CLOCK 6 KB CLOCK 7 PC+5V/V_USB 8 KB DATA 9V _ E X T 10 Shield Ground Cable Connector Configurations • RS232 PowerLin k Cable with built in power jack [ MLPN 55-55000A ] The RS232 PowerLink cable is termin ated with a 9-pin D-Type connector to the host.
29 A PPENDIX C ( CONTINUED ) • Keyboard Wedge Po werLink and Adapter Cable [MLPN 55-55002A] The Keyboard Wedge PowerLink cable is a “Y” ca ble termi nated with a 5-pin DIN female connector on one end, and a 6-pi n mini DIN male on the other.
30 A PPENDIX C ( CONTINUED ) • USB PowerLink cable [ MLPN 55-55165A ] The USB PowerLink cable is terminated with an USB A type connector. USB PowerLink cable Pin Function 1 PC+ 5V/V_USB 2D - 3D + 4 .
31 A PPENDIX D Warranty and Disclaimer Limited Warranty The MS5145 scanner is manufactured by Metrol ogic at its Suzhou, China facility. The MS5145 scanners have a two (2) year limited warranty from th e date of manufacture.
32 A PPENDIX E Notice This equipment has been tested and found to comply w ith the limits for a Class B digital device, pursuant to Part 15 o f the FCC rules. These limit s are desig ned to provide rea sonable protection against harmful interference in a residential installation.
33 A PPENDIX F Patent Information “This METROLOGIC product may be cover ed by one or more of the follo wing U.S. Patents: U.S. Patent No.; 5,260,553; 5,340,971; 5,424,525; 5,484,992; 5,525,789; 5,52.
34 I NDEX A AC input/outlet ................... 2, 3, 4, 6 Accessori es ................................... 2 Approvals ........................ 13, 20, 30 Assignments pin ...................... 2, 4, 6, 7, 26, 27 Audible .............................
35 I NDEX P Parts .......................................... 2, 8 Power supply ............... 3, 4, 6, 7, 26 Programming modes ......... 3, 17, 18 Q Quick start ..................................... 3 R Razzberry tone ............ 9, 10, 11, 22 Red LED .
June 2002 70 - 79001 B.
デバイスMetrologic Instruments MS5100の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Metrologic Instruments MS5100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMetrologic Instruments MS5100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Metrologic Instruments MS5100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Metrologic Instruments MS5100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Metrologic Instruments MS5100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMetrologic Instruments MS5100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Metrologic Instruments MS5100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMetrologic Instruments MS5100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
