Metrologic InstrumentsメーカーMS6200の使用説明書/サービス説明書
ページ先へ移動 of 40
METROLOGIC INSTRUMENTS, INC. MS6200 Pulsar ® Series Single-Line Hand-Held Laser Scanner Installation and User’s Guide.
.
ii L OCATIONS Corporate Headquarters North America Metrologic Instru ments, Inc. Customer Servic e: 1-800-ID-METRO 90 Coles Road Tel: 856-228- 8100 Blackwood, NJ 0801 2-4683 Fax: 856-228-66 73 Email: info@metrologic.
iii T ABLE OF C ONTENTS Introducti on........................................................................................................... 1 Accessories and Supplies ...............................................................................
1 I NTRODUCTION The MS6220 Pulsar ® is an entr y-level hand held contact laser b ar code scanner that combines the high-speed an d accuracy of a laser scanner with the working range and price of a typical CC D.
2 A CCESSORIES AN D S UPPLIES The following is a list of parts that may or may not be included in a MS6 220 kit. • MS6220 Pulsar ® Single-Line Co ntact Laser Scanner • AC to DC Power Transformer – Regulated 5.
3 Q UICK S TART 1. Connect the 10-pin RJ45 male connect or into the jack on the Pulsar ® MS6220. You will hear a ‘click’ when the connecti on is made. 2. Connect the L-shaped plug of the po wer supply into the power jack on the PowerLink cable. 3.
4 S TANDARD S CANNER I NSTALLATION 1. Turn off the host system. 2. Connect the 10-pin RJ45 male connect or of the PowerLink cable into the jack on the MS6220. Note: If the MS6220 is receiving power from the host system, skip to step #5. (See caution statement below*) 3.
5 o p q r s u t n K EYBOARD W EDG E I NSTALLATION 1. Turn off the host system. 2. Connect the 10-pin RJ45 male connect or of the PowerLink cable into the jack on the MS6220. 3. Connect the L-shaped plug of the po wer supply into the power jack on the PowerLink cable ( refer to the manufacturer ’s recommendation on pa ge 6 ).
6 K EYBOARD W EDG E I NSTALLATION ( CONTINUED ) Manufacturer’s Recommendation If the keyboard port of th e host system cannot su pply enough current, th e use of an ex ternal pow er supply w ith the MS6220 Keyboard Wedge will be necessary.
7 D ISCONNECTING THE P OWER L INK C ABLE F ROM THE S CANNER Before removing the cable from the sca nner, Metrologic recomme nds that the power on the host system is off and the power supply has been discon nected from the PowerLink cable. 1. Locate the small ‘pin-hole’ on the back of the scanner.
8 S CANNER P ARTS 1. Green & Red LEDs The MS6220 laser pulses on an d off during normal operat ion. The green LED remains on during normal p ulse operation and it blinks du ring power save mode. On a successful read of a bar code, the red LED will flash and the scanner will beep once.
9 A UDIBLE I NDICATORS When the MS6220 scanner is operatio nal, it provides audible feedback. T hese sounds indicate the status of the scann er. Eight settings are availa ble for the tone of the beep (normal, 6 alternate tones and n o tone). To change the tone, refer to the Configuration Guide.
10 V ISUAL I NDICATO RS There is a red LED and a green LE D on the MS6220. When the scanner is on, the activity of the LEDs indicates the st atus of the current scan and the scann er. Green and Red LEDs are off The LEDs will not be illuminated if the scanner is not receiving power from the host or transformer.
11 F AILURE M ODES One Razzberry Tone on Po wer-up This indicates the scanner has experi enced a laser or flipper subsystem failure. Return the un it for repair to a Metrologic Authorized Service Center.
12 S CAN A REA Minimum Bar Code Element Width ABCDE F mm .10 .12 .17 .26 .33 .66 mils 4.1 4.8 6.8 10.4 13 26.
13 L ABELS Each scanner has two labels on the unders ide of the unit. The first label has the model number, date of manufacture, an d caution information.
14 T ROUBLESHOOTING G UIDE The following guide is for reference purp oses only. Contact a Metrologic representative at 1-800-ID-METRO or 1- 800-436-387 6 to preserve the limited warranty terms on page 28.
15 T ROUBLESHOOTING G UIDE ( CONTINUED ) S YMPTOM S P OSSIBLE C AU SE ( S )S OLUTION The unit powers up, but does not scan Scanning a particular symbology that is not enabled UPC/EAN, Code 39, Interleaved 2 of 5, Code 93, Code 128 and Codabar are enabled by default.
16 T ROUBLESHOOTING G UIDE ( CONTINUED ) S YMPTOM S P OSSIBLE C AU SE ( S )S OLUTION Scanner beeps at some bar codes and NOT for others of the same bar code symbology The bar code may have been printed incorrectl y Check if it is a check digit/character/or border problem.
17 T ROUBLESHOOTING G UIDE ( CONTINUED ) S YMPTOM S P OSSIBLE C AU SE ( S )S OLUTION The unit is not transmitting each character (Keyboard Wedge) Configuration is not correct Increase interscan code delay setting. Adjust whether the F0 break is transmitted.
18 RS-232 D EMONSTRATION P ROGRAM If an RS-232 scanner is not communicating with your IBM compatible PC, key in the following BASIC program to test that the communication port and scanner are working.
19 A PPENDIX A Specifications O PERATIONA L Light Source Visible Laser Diode 6 50 nm ± 10 nm or 675 nm ± 5 nm Laser Power 0.75 mW (peak) Depth of Scan Field 0 mm – 64 mm (0” – 2.5”) for 0.33 mm (13 mil) bar code at default setting Scan Speed 72 ± 2 scan lines per second Scan Pattern Single scan line Minimum Bar Width 0.
20 A PPENDIX A ( CONTINUED ) E LECTRICAL Input Voltage 5 VDC ± 0.25 V Power - Operating 800 mW Current - Operating 160 mA peak @ 5 VDC DC Transformers Class 2; 5.
21 A PPENDIX B Default Settings Many functions of the scanner can be “progra mmed” – that is, enabled o r disabled. The scanner is shipped from the factory programmed to a set of default conditions. The default parameter of the scanner has an asterisk (*) in the charts on the following pages.
22 A PPENDIX B ( CONTINUED ) Parameter Default OCIA RS-232 Light Pen IBM 46XX KBW ITF Symbol Lengths Variable 999 9 9 Minimum Symbol Length 3 999 9 9 Symbol Length Lock None 999 9 9 Bars High as Code .
23 A PPENDIX B ( CONTINUED ) Parameter Default OCIA RS-232 Light Pen IBM 46XX KBW Expand UPC-E 999 9 9 Convert UPC-A to EAN-13 999 9 9 Transmit lead z ero on UPC- E 999 9 9 Transmit UPC-A number syste.
24 A PPENDIX B ( CONTINUED ) Parameter Default OCIA RS-232 Light Pen IBM 46XX KBW ETX suffix 99 “DE” Disable Command 9 “FL” Laser Commands 9 DTR Handshaking support 9 RTS/CTS Handshaking 9 Cha.
25 A PPENDIX C Scanner Pinout Connections MS6220 -41 RS-232/LTPN Pin Function 1 Ground 2 RS-232 Transmit Output 3 RS-232 Receive Input 4 RTS Output 5 CTS Input 6 DTR Input/LTPN Source 7 Reserved 8 LTPN Data 9+ 5 V D C The MS6220 scanner interfaces terminate to a 10-pin modular jack.
26 A PPENDIX C ( CONTINUED ) MS6220 -47 Keyboard Wedge Pin Function 1 Ground 2 RS-232 Transmit Output 3 RS-232 Receive Input 4 PC Data 5 PC Clock 6 KB Clock 7P C + 5 V 8 KB Data 9+ 5 V D C 10 Shield G.
27 A PPENDIX C ( CONTINUED ) Keyboard Wedge Po werLink and Adapter Cable The Keyboard Wedge PowerLink cable is termi nated with a 5-pin DIN female connector on one end, and a 6-pi n mini DIN male on the other. Metrologic will supply an adapter cable with a 5-pin DIN male connector on one end and a 6-pin mini DIN female co nnector on the other.
28 A PPENDIX D Warranty and Disclaimer Limited Warranty The MS6220 scanners are manufactured by Metrologic at its Blackwood, New Jersey, U.S.A. facility.
29 A PPENDIX E Notices Notice This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide reasona ble protection against harmful interference when the equipment is operate d in a commercial environment.
30 A PPENDIX E ( CONTINUED ) Ach t un g Die Verwendung anderer als der hier beschrieben en Steuerungen, Einstellungen oder Verfahren kann eine gefährliche Laserstrahlung hervorrufen. Der Kund e sollte unter keinen Umständen versuchen, den Laser-Scanner selbst zu warten.
31 A PPENDIX F Patent Information “This METROLOGIC product may be cover ed by one or more of the follo wing U.S. Patents: U.S. Patent No.; 4,958,894; 5,081,342; 5,216,232; 5,260,553; 5,340,971; 5.
32 I NDEX A AC input/outlet ................... 2, 3, 4, 6 Accessori es ................................... 2 Approvals ........................ 13, 20, 30 Assignments pin ...................... 2, 4, 6, 7, 26, 27 Audible .............................
33 I NDEX P Parts .......................................... 2, 8 Power supply ............... 3, 4, 6, 7, 26 Programming modes ......... 3, 17, 18 Q Quick start ..................................... 3 R Razzberry tone ............ 9, 10, 11, 22 Red LED .
N OTES.
.
June 2002 00 - 02447.
デバイスMetrologic Instruments MS6200の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Metrologic Instruments MS6200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMetrologic Instruments MS6200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Metrologic Instruments MS6200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Metrologic Instruments MS6200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Metrologic Instruments MS6200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMetrologic Instruments MS6200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Metrologic Instruments MS6200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMetrologic Instruments MS6200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
