MetzメーカーNoneの使用説明書/サービス説明書
ページ先へ移動 of 116
HOME ENTERT AINMENT Operating instructions for all LCD-TV ML and Puros sets Metz - always first class. 606 47 2030.A1 07/11/12 LCD-TV 606 47 2030.A1 ML GB 16.
1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. The Remote Control . . . . . . . . . . . . . . . . . . . . 6 4. Daily Operation . . . . . . . . . . . . . . . .
3 Contents Configuration W or th knowing Manual DVB-C station search. . . . . . . . . . . . 66 23. Station Logo . . . . . . . . . . . . . . . . . . . . . . . . 67 24. Sorting Stations . . . . . . . . . . . . . . . . . . . . . . 68 25. Reg. A V Devices .
4 • T ake care that no bright artificial light or sunshi- ne falls directly on the screen. This could cause reflections which have a negative effect on the brilliance of the picture. • The best viewing distance is three times the screen diagonal, i.
5 2. Safety notes • Always place the monitor on a solid, stable surface. • If a cold TV set is moved to a warm room, always allow any condensation on the screen to evaporate before swit- ching it on. • The TV set is intended for use in a dr y room.
6 Ǽ The remote control sends commands to the TV set by means of an infrared sig- nal.
7 3. The Remote Control Over view of the functions of the keys Switch to DVB radio mode. Switch on from the standby state into radio mode 1) . Function keys: F1/F2/F3: press briefly to call the functions set in the factor y . F1/F2/F3: press and hold to display a selection of special functions.
8 4. Daily Operation Switching on Switch on the TV set with the main switch. The TV set is now in standby mode and the red standby indicator lights. After about five seconds, the TV set swit- ches to programme position 1 or to the programmed initial programme position.
9 Selecting stations from the station table In normal TV or radio 1) mode, you can display the station table by pressing the white key . Press the white key repeatedly to display a vir- tual keyboard. Use the respective key to sort the station list alphanumerically .
10 During the design of this TV set, we have made ever y effor t to make it as easy a possible for you to use it and we hope that you will enjoy familiari- sing yourself with your new TV set. With the "Information" menu, the TV set is able to answer the many questions which may come up during installation and setup.
11 With the "TV menu", we provide you with an assistant to help you find your way through the many possible settings of the TV set. Don't be afraid to change any settings in the various menus. No changes will be saved unless you press the " OK " key to confirm them.
12 T eletext is an additional ser vice provided free of charge by many TV stations. It is an "electronic magazine" through which you can browse in various ways. Opening T eletext: • Press the " TEXT " key . If the selected station offers "TOP-T ext", a "card file" is displayed (see the picture on the left).
13 Double font size Y ou can double the size of the font used for T eletext pages with the F1 key . Pres- sing this key once displays an enlarged picture of the upper third of the page. Pressing it a second and third time dis- plays the centre and lower thirds of the page.
14 Displaying all T eletext marks 6) If you have set marks for a programme position, you can display an over view of these marks by pressing the F3 key . The displayed list shows whe- re the marks are set. Press F3 again to hide the list. Y ou can select the individual marks in the list with the numeric keys.
15 Opening the menu A V playback (devices with switching voltage) Before they can be used, A V devices must be registered and assigned to the appropri- ate input sockets in the menu "A V devices". Playing back a recording from a video cassette, DVD, etc.
16 If you now start to play back a recording on the connected A V device, the TV set changes automa- tically from any other programme position to the playback mode.
17 10.1 A V Playback VCR function The menu item "VCR" is not available in a 2 ** menu. Picture quality when playing back from tape devices The VCR function ensures an optimum picture quality when playing back recordings from tape devices such as video cassette recorders or cam- corders.
18 11. General Picture Settings Some of the menu items are not available in a 2 ** menu. The picture settings brightness, contrast, colour intensity , sharpness and noise reduction can be set generally for all programme positions and saved as standard values which can be recalled at any time by pressing the " OK " key .
19 Opening the menu MENU 11. General Picture Settings Some of the menu items are not available in a 2 ** menu. The backlight control (factor y setting "off") can be set to "dynamic" or "automatic". With "dynamic" the backlight control is adjusted according to the picture contents.
20 11. General Picture Settings Some of the menu items are not available in a 2 ** menu. Depending on the brightness of the picture shown, with the setting "Picture improvment on" there is an extension of the bright area in the case of dark picture contents.
21 Opening the menu MENU 11. General Picture Settings Some of the menu items are not available in a 2 ** menu. The picture settings zoom, vertical position, auto- matic zoom and panorama can be set and saved as general settings for all programme positions.
22 11.1 Picture Settings for Programmes via TV Menu Opening the menu Picture settings for individual programme positions are not available in a 2 ** menu.
23 Opening the menu 11.2 Picture Settings for Programme via Station T able Individual picture settings for programme position xy: • Select the programme position whose picture settings you wish to change. • Press the " MENU " key . The TV menu appears on the screen.
24 Opening the menu 12. General Sound Settings Some of the menu items are not available in a 2 ** menu. The sound settings volume, treble, bass, stereo wide and spatial sound can be set generally for all programme positions and saved as standard values which can be recalled at any time by pres- sing the "OK" key .
25 12. General Sound Settings Some of the menu items are not available in a 2 ** menu. Setting SRS-WOW 2) • Press the "MENU" key . The TV menu appears on the screen. • Press the blue key . The menu "Picture and sound" and the menu item "General picture set- tings" are pre-selected.
26 Automatic volume correction Some TV stations transmit their commercials at a higher sound volume than that for the normal pro- gramme. In order to save you from adjusting the volume each time with the remote control, you can activate automatic volume correction.
27 12. General Sound Settings Base width and spatial sound The menu points base width and spatial sound are only shown when the function "SRR WOW" is turned off.. Base width In the case of stereo transmissions, the base width (= spatial distance between the loudspeakers) can be artificially widened to achieve a larger stereo triangle.
28 12.1 Sound Settings for Programmes via TV Menu Opening the menu Some of the menu items are not available in a 2 ** menu. V olume correction V arious TV stations broadcast their programmes with different sound volumes. This volume dif fe- rence can be minimised by correcting the volume.
29 12.1 Sound Settings for Programmes via TV Menu Opening the menu Some of the menu items are not available in a 2 ** menu. T one setting The tone setting can be set to "Normal" or "Speech".
30 12.1 Sound Settings for Programmes via TV Menu Some of the menu items are not available in a 2 ** menu. Forced mono It may happen that your TV set switches from mono to stereo in the middle of a programme, alt- hough no stereo sound is being transmitted.
31 12.2 Sound Settings for Prog. via the Station T able Opening the menu Some of the menu items are not available in a 2 ** menu. Making sound corrections: • Select the programme position whose sound set- tings you wish to change. • Press the " MENU " key .
32 Opening the menu 13. Automatic zoom The menu item "Automatic zoom" is not available in a 2 ** menu. When the automatic zoom function is active, pro- grammes in a "widescreen" format (such as pro- grammes in 16:9) are expanded to fill as much of the screen as possible.
33 Opening the menu 14. Childlock With the aid of the childlock function, you can determine whether or not the TV set can be swit- ched on and which stations may be selected at which times. The childlock can be set such that: a) it is always active, b) one to six TV , radio or A V programmes (Prog A .
34 b) Permitted programmes: Activate the childlock as described in step a). Use the corresponding numeric key to select the menu item "Permitted xx progs.
35 The menu item "Reminder" is not available in a 2 ** menu. If you wish to be reminded of something while watching TV , you can set a reminder for any des- ired time. At this time, a window with the remin- der appears on the screen. Setting the reminder time • Press the " MENU " key to open the TV menu.
36 The menu items "On time" and "Off time" are not available in a 2 ** menu. In the menu item "Timer control", you can pro- gramme a switch-on time, a switch-off time and a sleep timer (switch off after ...). The switch-on time is the time at which the TV set is to be switched on automatically .
37 Normally , the TV set will determine the current date and time from the T eletext signals of the currently selected station (providing this station sends T eletext). Note: For this the device must be turned on with the mains switch. If this is not the case, or if an incorrect date or time is displayed, you can set the date and time manually .
38 16.2 Recording Control Opening the menu This menu item is not available in a 2 ** menu. In the menu item "Recording control", you can set a lead time and an overrun time for timer recordings.
39 16.2 Recording Control Application example: Y ou wish to record a programme received via DVB-T . The programme starts at 22:45 hours, ends at 23:40 hours and is broadcast on ITV . Set up a "manual timer" as described in Section 17, "Special Functions 2" or set a timer with the aid of the EPG as described in Section 20.
40 EXIT In the case of TV sets with one front end , the pic- ture in picture function (PIP) can only be used for the superimposition of an A V set. In this regard, the following superimposition option.
41 17. Special Functions Normal/Speech Opening the menu Opening the menu Selection of "Normal" or "Speech" is des- cribed in Section 12.1, "T one Settings". In this menu, you can temporarily select " Normal " or " Speech ".
42 "Record". The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered dif ferently . Use the - + key to set this menu item to "Y es".
43 17. Special Functions Direct recording of a programme Opening the menu If you wish to record the programme you are cur- rently watching, you can start a direct (one-touch) recording to make the current programme availa- ble to a recording device connected to the EURO sockets.
44 Adjusting the picture for mat: • Press the F3 key . If you press F3 briefly , the function programmed for F3 (see Section 18., "Programming the Func- tion keys") is executed. If you hold down F3 for about two seconds, all possible selections are dis- played.
45 17. Special Functions Picture format Opening the menu Panorama With the aid of the panorama function, you can expand programmes broadcast in 4:3 format to fill the screen of a 16:9 TV set. The picture is expanded uniformly in the horizontal direction.
46 If desired, the picture can be shifted up or down in order , for example, to make subtitles visible or to hide "ticker" displays. Adjusting the picture position: • Press the F3 key . If you press F3 briefly , the function programmed for F3 (see Section 18.
47 The remote control has four function keys: F1, F2, F3 and A V . Y ou can programme these function keys with any of the available functions. If you press and hold any function key , a window with the available functions is dis- played. The picture on the left shows the functions available for the F2 key .
48 In the menu "Sound settings", you can activate a two-stage mute function. When this function is active, the volume in TV mode can be reduced in two stages with the mute key . Activating the mute function • Press the " MENU " key to open the TV menu.
49 19.1 Data Logic Settings Data Logic Mode 1 / Mode 2 Factor y setting is Mode 1 . If the recording is stopped by the Data Logic Videorecorder (self-dependent, 5-10sec. after the start of the recording), switching to Mode 2 could solve this problem. Opening the menu MENU OK EXIT OK Data Logic mode 2 Data Logic adjustm.
50 EPG 20. EPG EPG ( E lectronic P rogram G uide) is an electronic TV guide covering all major channels. The guide may be made up of details from NexTView and/or DVB-SI . The NexTView information is broadcast by various channels and also includes information for other broadcasting organizations.
51 20.1 Activating the EPG Pressing the green key for yes activates the slot in order to receive NexTView . The message will not appear again. If you know the NexTView slot, you can also enter it using the numeric keys in the TV menu. Y ou can over write existing programme slot num- bers or delete them with the II key .
52 NexTView data 8) is transmitted by various broadcasting organizations. DVB-SI data is broadcast by each chan- nel corresponding to its own content. Information may therefore correspondin- gly var y . Switch on your TV , so that EPG data can be compiled and/or updated.
53 Solution 2: • Press the MENU key . The TV menu appears on the screen. • Press the white key . The menu channel table appears with the active pro- gramme slot selected.
54 20.3 Using the EPG Once all of the EPG data have been collected, briefly pressing the "EPG" key displays the EPG with the current programme on the selected pro- gramme position highlighted. The following keys have special functions in EPG mode: Select a programme.
55 20.3 Using the EPG Selecting a programme and viewing or setting a reminder In the EPG, you can select a programme with the cursor control key . • Press the " OK " key in order to - view the programme if it is already running, or - set a reminder for it if it has not yet started.
56 20.3 Using the EPG Opening the menu Programme Information (Now Showing: ..) After switching to a channel, a box is displayed at the bottom of the screen as shown in the picture. This box contains the following infor- mation: - Channel number (in this example: Pr4).
57 20.3 Using the EPG Recording a Programme Selecting a programme for recording: If you have a video recorder with the dialogue system, the EPG permits you to star t a recording by pressing a single key . • Press the " EPG " key to open the EPG.
58 21. Setting the Countr y and Language The menu items "Language" and "Countr y" are not available in a 2 ** menu. Selecting the language in the TV menu Y ou can select any of the available languages for the TV menu. All texts in the menu and in the help screen (Information) are then displayed in the selected language.
59 22. Setting Stations Setting the reception mode This TV set is capable of operating in three diffe- rent reception modes: Analogue TV : The broadcasting technology which has been used for many years. The signals can be received via a rooftop antenna or a cable.
60 V arious TV standards for picture and sound are used in different countries. If the wrong TV stan- dard is selected, you will not be able to hear the sound, or it will be distorted. The TV standard "L" also uses a different standard for transmission of the picture.
61 Opening the menu 22.1 Setting Stations Analogue TV T errestrial station search The terrestrial station search automatically searches the entire range of available reception frequencies for stations. All stations which are found are placed in the station table which is displayed at the end of the search operation.
62 The TV set will normally detect the colour standard (P AL, SECAM, NTSC, NTSC44, P AL60, P AL M) automatically . If this automatic selection does not provide satis- factor y results (which should happen only rarely), you can select the colour standard manually for each programme position.
63 The DVB-T station search operation searches the entire frequency band for TV and radio stations . All stations which are found are placed in separa- te TV and radio station tables.
64 For a manual station search, you must know the channel number or the frequency of the station you wish to find. Executing the manual search • Press the " MENU " key to open the TV menu. • Press the red key to open the menu "Confi- guration".
65 The DVB-C station search operation searches the entire frequency band for TV and radio stations . All stations which are found are placed in separa- te TV and radio station tables.
66 For a manual station search, you must know the channel number or the frequency of the station you wish to find. Executing the manual search • Press the " MENU " key to open the TV menu. • Press the red key to open the menu "Configuration".
67 23. Station Logo With the aid of the VPS signal, a station logo with a maximum length of 15 characters is automati- cally assigned to each station. If this automatic assignment does not work, or if you want to use a different logo, you can change the setting manually .
68 24. Sor ting Stations Y ou can move, copy and delete individual stations or groups of stations within the station table. Moving, copying and deleting stations • Press the " MENU " key to open the TV menu. • Press the white key to open the station table.
69 25. Registering A V Devices Opening the menu MENU AV (audio/video) devices are external devices which deliver video and/or audio signals (such as video recorders, DVD players, DVD recorders, etc.) and which can be connected to TV sets. All commonly available A V devices are listed in the menu "A V devices".
70 Data Logic video recorder " Data Logic " is a system which provides a dialo- gue between a TV set and a video recorder . This "intelligent" system offers the features such as: - Automatic transfer of the settings for terrestrial or cable TV stations (not DVB) to the video recorder .
71 25. Registering A V Devices Data Logic Opening the menu • Press numeric key , use the - + key to select the correct signal types (OUT/IN) and press the " OK " key .
72 The signal type always refers to the input and output of the A V device. Some A V devices may use a composite video sig- nal (FBAS) for recording and playback operations and an RGB signal for displaying their menus. It is not possible to make a general statement in this respect.
73 25. Registering A V Devices Setting signal types DVI/HDMI The signal type always refers to the input and output of the A V device. A V devices equipped with a DVI or HDMI socket can be connected to the LCD TV with the aid of a DVI or HDMI cable, respectively .
74 Connection of external devices with YUV compo- nent output to the "COMPONENT IN" RCA jacks. The signal type always refers to the input and output of the A V device. A V devices equipped with a YUV jack can be con- nected to the LCD TV by means of a YUV cable (see page 86).
75 25.1 Removing A V Devices Opening the menu The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently .
76 Y ou can define an initial programme position in this TV set. This initial programme position is used primarily to select the A V programme position if you use an external receiver . Setting the initial programme position This menu item is not available in a 2 ** menu.
77 MENU The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently .
78 On the rear of the TV set, you will find audio sockets and a digital audio-out socket (see page 81) which can be used to connect the TV set to a HiFi system (HiFi amplifier).
79 Opening the menu 28. DVB Radio Mode T o switch from TV mode to DVB radio mode, press the " R " key . The screen is automatically blanked after about 30 seconds.
80 29. Scope of Operation The adjustable scope of operation for the TV set can be a great help in finding your way around the complex operating functions of the TV set. The scope of operation can be set to various levels, which are identified by asterisks.
81 • Use the - + key to select the desired scope of operation and press the " OK " key to save the new setting. 2 This menu permits you to configure the use of the TV set to a certain degree.
82 30. Operation without the Remote Control Operation without the remote control is provided as an emergency measure in case the batteries of your remote control are exhausted or the remote control is not readily available.
83 When receiving a dual-language pro- gramme, you can switch between the two sound channels. In TV mode, press and hold the yellow key until the sound function "Sound mode" is selected. Then use the - + key to select Sound 1 or Sound 2. 32.
84 33. Cleaning the TV Set Before cleaning the set, always switch it off with the mains switch! Incorrect treatment and cleaning of the screen sur- face can cause irreparable damage to it. Y ou should therefore always obser ve the following instructions for treatment and cleaning of the set.
85 Ser vice socket for use by your dealer 34. Connections on the Left Headphone socket, diameter 3.5 mm FBAS/Video in (e.g. digital camera or camcorder) Audio in R/L (e.
86 35. Connections on the Rear of the Set (covered by a flap) Viewed from below EURO sockets for connection of external A V devices Video and audio IN/OUT With the aid of an optical audio cable ("T oslink" cable, available from your dealer), the digital audio signal (AC3) provided by the TV set can be extracted for external processing.
87 35.1 Connecting a Hifi Amplifier/A V Receiver Metz LCD-TV HiFi-amplifier A V-Receiver 606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 87.
88 35.1 Connecting a Hifi Amplifier/A V Receiver Registering the A V Device with the TV • Enter the TV menu by pressing "MENU". • Press the yellow key to open the "A V Devices" menu. • Use the cursor control key to select "Hifi Amplifier" in the device selection.
89 36. Copying between A V Devices Direct recording Opening the menu If you wish to copy a recording from one of the A V devices connected to your TV set (such as a DVD player) to another connected A V device (such as a video recorder), you must do this by means of a direct recording operation.
90 • Use the cursor control key to select the line "Recording device". If only one such device exists, it is then display- ed. If further recording devices exist, you can select the desired device with the aid of the - + key . • Press the " OK " key to save the settings.
91 Opening the menu MENU 37. Setting the Picture Format Some of the following menu items are not available on a 2 ** menu. Setting the picture for mat: • Select the A V programme position which deli- vers the picture by pressing the " AV " key and then pressing the numeric key corresponding to the device you want to use.
92 38. Glossar y A V programme position A V devices have one or more connection sockets, depending on the model. The designations of the- se sockets are marked on the device (e.g. A V1). On the A V device, you can select which socket you want to use. The selected socket is shown on the display of the A V device (e.
93 Picture position, ver tical With widescreen films, subtitles are sometimes transmitted in the black area at the bottom of the screen. Y ou can move the picture upwards on the screen to ensure that these subtitles remain visible. Standard values The standard values are the settings (such as brightness, sound volume, colour , etc.
94 38. Glossar y T one settings The tone can be set to either "Normal" or "Speech". In the setting "Speech", the bass and treble components of the sound signal are set to make speech as easy to understand as possible. The setting "Normal" is recommended for music programmes.
95 Mains voltage: 230-240 V AC, 50Hz Antenna input: 75 Ohms, unbalanced DIN 45325 Channel coverage: Standard channels 2 - 12, 21 - 69 Special channels S1 - S20, S21 - S41, S42 ... S46 (Belgium channels OIR) Power consumption ** The power consumption was determined with backlight control turned of f (see p.
96 Suppor ted Signal Standards Video HDMI a) 720x480i/p 60Hz RGB b) 720x480i/p 60Hz YCbCr 4:4:4 / 4:2:2 c) 720x576i/p 50Hz RGB d) 720x576i/p 50Hz YCbCr 4:4:4 / 4:2:2 e) 1280x720p 50/60Hz RGB f) 1280x720p 50/60Hz YCbCr 4:4:4 / 4:2:2 g) 1920x1080i 50/60Hz RGB h)1920x1080i 50/60Hz YCbCr 4:4:4 / 4:2:2 i) 640x480p 60Hz RGB Video DVI-D a) .
97 39.1 Conversion possibilities • DVB-S digital conversion set 029 NM 1119 for the reception of digital satellite stations for TV and radio programs. The DVBD conversion set is installed in the TV set and you do not need any additional remote control for it.
98 40. Inser ting / Removing CA Modules The LCD TV has two slots (CI1 / CI2) for CA modules at the top (card reader for smartcards or decoder cards). T o insert the CA module, open the lid on the top of the LCD TV and insert the CA module in one of the slots as shown in the pictures.
99 41. Basic differences between analog terrestrial reception and DVB-T Information for our dealers and interested customers. In order to understand how the behaviour of DVB-T receivers differs from that of the analog terrestrial receivers used until now , two things are important: digital transmission and the simultaneous broad- casting network.
100 41. Basic differences between analog terrestrial reception and DVB-T Addition Cancellation In most cases, only a few of the 8,192 carrier frequencies will be fully cancelled out and the information which is lost can be reconstructed by the error-correction function of the receiver .
101 Calling the menu MENU The settings of the satellite antenna system must be entered in the menu "Configuration" so that the TV set knows them. These settings should always be made in the order in which they are shown in the right-hand column of the menu, starting at the bottom, i.
102 "DiSEqC" makes it possible to control the satel- lite antenna digitally via the existing antenna cable and is a prerequisite for the reception of signals from more than two satellites (e.g. Astra, Eutelsat, Hotbird). If you wish to receive signals from at least three satellites (e.
103 Y ou can set up to four satellites in the menu "Con- figuration". No satellite is set in the factor y . The LNB frequency is used to switch between the high and low frequency bands. The default fre- quencies Low band 9.75 GHz and High band 10.
104 Before executing a DVB station search, you must make the appropriate search settings. Depending on the features installed in the TV set and your personal requirements, you can make the following settings: All = search for all stations on the selected satelli- te.
105 The DVB-S station search scans the entire recep- tion band for TV and radio stations and stores them in separate TV and radio station tables. For details of the DVB radio mode, see Section 29 in the operating instructions for the TV set.
106 For the manual search, you must know the fre- quency , the symbol rate and the polarisation of the station for which you want to search. Executing the manual search • Press the MENU key to open the TV menu.
107 With the menu item, "General settings", you can specify whether or not the data are to be saved in the non-volatile memor y of the TV set when trans- mission parameters are changed.
108 Problem Possible cause Remedy TV set does not react to commands from the remote control • No line of sight between the remote control and the TV set. • Sunlight is shining directly on the infrared window of the TV set. • Batteries of the remote control are exhausted.
109 Data Logic does not work. A V device (video rec.) independently breaks off recording • The Data Logic video recorder with data transfer has not been registered correctly . • The Scart cable does not have all pins connected through. • Wrong data logic setting (see also ch.
110 ✍ ✍ 606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 110.
111 H eadphones . . . . . . . . . . . . . . . 83,85 Help . . . . . . . . . . . . . . . . . . . . . . . . 10 HiFi output . . . . . . . . . . . . . . . . . . . 77 I nfo (Information) . . . . . . . . . . . . . . 10 Initial programme position . . . . . . .
112 Sound effects . . . . . . . . . . . . . . . . . 24 Sound settings . . . . . . . . . . . . . . . 8,24 Spatial sound (see sound settings). . . 24 SRS-WOW . . . . . . . . . . . . . . . . . . . 25 Standard picture settings . . . . . . . . . 18 Standard sound settings .
113 T o connect a PC to the LCD TV , you must first regi- ster the PC with the LCD TV ; see Chapter 25 "Registering A V Devices". Set the signal type for the PC to DVI-A (analogue with VGA cable) or DVI-D (digital with DVI cable), depending on the connection type.
114 V arious pay TV stations broadcast por tal stations. These portal stations are filled with sub-stations or optional channels. In station search (see ch. 22) in "Search settings" the setting "all", "only free" or "free+CICAM" must be set so that these stations can be found too.
115 ✍ Errors excepted. Subject to changes ! Y our Metz product was developed and manufactured with high-quality materials and components which can be recycled and/or re-used. This symbol indicates that electrical and electronic equipment must be disposed of separately from normal garbage at the end of its operational lifetime.
Metz - W erke GmbH & Co. KG - Zirndor f near Nürnberg Core competence in the areas of electronics and plastics technology to form the basis of the excellent reputation of the Metz W erke that has been built up throughout the world over a period of many decades.
デバイスMetz Noneの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Metz Noneをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMetz Noneの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Metz Noneの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Metz Noneで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Metz Noneを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMetz Noneの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Metz Noneに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMetz Noneデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。