MicroBoards TechnologyメーカーQD-52の使用説明書/サービス説明書
ページ先へ移動 of 21
QD-52 User’s Manual www.microboards.com Version 4.4.
2.
3 Table of Contents Introduction ................................................................................................................... ................... 5 Unpacking y our sy stem ........................................................
4.
5 Introduction The QD-52 is a high sp eed, low cost one to one CD Recordable d uplication system from Microboards Technology, LLC. The QD-52 is perfect fo r any user requiring easy copying of a udio, video, or Data CDs. Superior technology allows the QD-52 to ship without a har d drive.
6 Basic Instructions Buttons and LCD There are four buttons and an LCD on the front panel of the QD-52 duplicator. LED display: Shows the menu item s and any status messages that may com e up during operation. ENT button: The ENT bu tton, used to start a duplication process o r enter into an area in the menu structure.
7 The QD-52 system consists of a CD reader, CD Writer and Controller module. The master discs always go into the TO P CD Reader drive. The blank CD media will always go into the BOTTOM CD Recorder drive. The power switch and power LE D are also lo cated on the front of the QD-52 duplicator.
8 Main Menu 1.0 Copy 2.0 Test 3.0 Test & Copy 4.0 Veri fy 5.0 Compare 6.0 Prescan 7.0 Disc Info 8.0 Edit Track 9. Setup Source Disc Analyzing…. Copying – 52x 17% 150.4MB 01:15 1.0 Copy OK: 01 ESC Load Next Blank Disc ENT Source Disc Analyzing….
9 1. Copy Copying – 52x 18% 150.4MB 01:15 2. Test Testing – 52x 18% 150.4MB 01:15 3. Test & Copy Testing – 52x 18% 150.4MB 01:15 1.0 Copy OK: 01 2.0 Test OK: 01 Functions There are 9 different function s for the QD-52 duplicator: Copy, Test, Test & Co py, Verify, Compare, Prescan, Disc Info, Edit Track and Setu p.
10 Copying – 52x 18% 150.4MB 01:15 3.0 Copy OK: 01 4. Verify 4. Verify OK: 01 5. Compare Compare OK: 1 Fail: 0 Diff: 0 6. Prescan Src:01 CD-RW Total: 15.2MB Tgt: 00 CD-RW Identical When this operation completes, the unit will sta rt the Copy process: When the job is completed, the recorded disc will be ejected from the BOTTOM drive.
11 Scaning – 24x 15% 620.4MB 02:15 PreScan OK! 7. Disc Info Source Disc (Analyzing) 8. Edit Track 8-01. Edit Track CD to CD Edit Select Track: 1/16 04:53 Select Track: + 1/16 04:53 Select Track: End 1Track 04:53 Place the master disc into the TOP reader drive a nd press ENT.
12 End Edit Disc And burn? YES Copying – 52x Edit 1/16 → 1/1 Burn Complete! OK: 01 Continue Edit Next disc? NO Continue Edit Next disc? NO Close all disc’s Sessions? Yes Closing Session Please wait…. Close Complete OK: 01 Fail: 01 8. Edit Track 8-01.
13 8-02. Edit Track Play Audio Track Select Track: 1/16 04:53 8. Edit Track 8-01. Edit Track CD to CD Edit 8-03. Edit Track Close Session Close all disc’s Sessions? Yes Closing Session Please wait…. Close Complete OK: 01 Fail: 01 Press the ▼ button until the display reads: Press the ENT button.
14 Setup 9.Setup 9- 01. Setup Language 9-02. Setup Burn Speed 9-03. Setup Read Speed 9-04. Setup Auto Start Drive 9-05. Setup Start Up Menu 9-06. Setup Auto Verify 9-07. Setup Auto Compare 9-08. Setup Auto Prescan 9-09. Setup Eject Disc 9-10. Setup Burn Mode 9-11.
15 The Setup menu include s many setting the user ca n select to cu stomize the use of the QD-52 duplicator. Here is a description of the options in the setu p menu. Please refer to the chart on page 15 for the location and options of these settings. Language The QD-52 duplicator has two language options, English and Spani sh.
16 Eject Disc There are 3 options for the Eject Disc set ting: 1. Eject good discs only 2. Eject all discs 3. Do not eject discs The default setting is to eject the good discs only. Burn Mode There are 3 options for the Burn Mode setting: 1. DAO (Disc A t Once) 2.
17 Adv Setup 10 - 01 A dv Setup Under Run Protect 10 . A dvanced Setup Under Run Protect ON 10 - 02 A dv Setup Overburn 10 - 03 A dv Setup Read Error Skip 10 - 04 A dv Setup Burn - In 10 - 05 A dv Set.
18 Update F/W T.950 To T.970 YES? Advanced Setup Menu To get to the Advanced S etup M enu, press and hold the ESC button for three sec onds. The Advanced Setup menu inclu des options for the more adv anced user. Normally these functions are not u sed in the daily operation of the QD-52 duplicator.
19 S pecifications • Product Name Quic Disc QD-52 • Product Interface ATAPI/ IDE • Read Speed 52X • Write Speed 52X • Supported Formats CD-ROM Mode 1 & 2 CD -DA , CD-ROM/XA Video CD , Ga.
20 Appendix 1 List of Functions 1 Copy 2 Test 3 Test & Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Edit Track (for CD only) 8-1 CD to CD Edit 8-3 Play Audio Track 8-4 Close Session 9 Setup 9-1.
Appendix 2 LCD Messages Normal Conditions: Initialize SDRAM ........................ ........... .................. ............ .....Initialize the memory of the s ystem. Detect Drives ............................... ............... ......Detect what drives are connected with the system.
デバイスMicroBoards Technology QD-52の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
MicroBoards Technology QD-52をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMicroBoards Technology QD-52の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。MicroBoards Technology QD-52の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。MicroBoards Technology QD-52で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
MicroBoards Technology QD-52を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMicroBoards Technology QD-52の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、MicroBoards Technology QD-52に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMicroBoards Technology QD-52デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
