Mieleメーカー09 848 440の使用説明書/サービス説明書
ページ先へ移動 of 100
Oper ating instructions for washing machines T o avoid the risk of accidents or damage to the machine, it is essential to r ead these instructions before it is installed and used for the first time.
Contents 2 Caring for the environment ................................................................................... 6 Warning and Safety instructions ......................................................................... 7 Operating the washing machine .
Contents 3 T o cancel delay start and begin the progr amme straight away ............................. 39 Progr amme chart ................................................................................................. 40 Options ...................
Contents 4 The door will not op en ...................... ............................ ............................ ............. 70 Opening the door in the event of a blocked dr ain outlet and/or power failure ...... 71 After sales service ..........
Contents 5 Pr e-wash Cottons .................................................................................................. 91 Gentle action ..........................................................................................................
Caring for the envir onment 6 Disposal of the packing mate‐ rial The packaging is designed to pr otect the washing machine from damage dur‐ ing transportation. The packaging ma‐ terials used ar e selected from mat erials which are envir onmentally friendly for disposal and should be recycled.
W arning and Safety instructions 7 This washing machine complies with current safety r equirements. Inappropriat e use can, however , lead to personal injury and dam‐ age to pr operty . T o avoid the risk of accidents and damage t o the machine, please read these instructions car efully before using it for the first time.
W arning and Safety instructions 8 Safety with children Children under 8 years of age must be k ept away from the wash‐ ing machine unless they are constantly supervised.
W arning and Safety instructions 9 The electrical safety of this washing machine can only be guar an‐ teed when corr ectly earthed. It is essential that this standard safety r equirement is met. If in any doubt, please have the wiring system of the building t ested by a qualified electrician.
W arning and Safety instructions 10 The machine must be isolated fr om the electricity supply when cleaning and maintaining the machine and in the event of a fault. The machine must only be connected t o the on-site water supply using a new hose kit.
W arning and Safety instructions 11 Correct use Do not install the washing machine in a room wher e there is a risk of frost. F ro zen hoses may burst or split. The reliability of the elec‐ tronic contr ol unit may be impaired at t emperatur es below freezing point.
W arning and Safety instructions 12 T ake care when opening the drum door after using the st eam function. Danger of burning due to escaping st eam and the high temper ature of the surface of the drum as well as the porthole glass. Stand back away fr om the machine and wait until the steam has dis‐ sipated.
W arning and Safety instructions 13 Colour run and dye removers contain sulphur compounds which can cause damage such as corrosion. Do not use these pr oducts in this machine. If deter gent comes into contact with the eyes, rinse them thor‐ oughly with lukewarm water immediat ely .
Operating the washing machine 14 Control panel a Display with sensors See the next page for mor e informa‐ tion. b Start/Stop button F or star ting the progr amme selected and cancelling a progr amme once it has started. c T emperatur e button F or selecting the temperatur e.
Operating the washing machine 15 j sensor Scrolls down the list t o the next op‐ tion or decreases a value. k OK button Confirms the progr amme selected, a value set or opens a sub-menu. l sensor Scrolls up the list t o the next option or increases a value.
Operating the washing machine 16 Standard display The standard display shows the follow‐ ing from left t o right: 2:59 1600 – the progr amme duration – the selected wash temper ature – the.
Before using for the first time 17 Before using the machine for the first time ensure that it is corr ectly in‐ stalled and connected. See "Installa‐ tion and connection". Also check that the drain filt ers are secur ely tightened to pr event the risk of water leaks during use.
Before using for the first time 18 This washing machine has undergone a complete functional test at the fac‐ tory and there will be some r esidual water in the drum fr om this process. F or safety reasons, spinning is not pos‐ sible until the machine has been pre‐ pared for using for the first time.
T winDos 19 The washing machine has an integr ated deter gent dispensing unit. The deter gent dispensing unit can be used with 1. the Miele 2 Phase System or 2. any other liquid detergent and/or fab‐ ric conditioner The Miele 2 Phase System The Miele 2 Phase System uses a base deter gent (UltraPhase 1) and a deter‐ gent enhancer (UltraPhase 2).
T winDos 20 Inserting cartridges/containers Keep filled containers or car‐ tridges out of the reach of childr en. Observe the instructions for use and warning instructions given by the de‐ ter gent manufacturer . Pr ess the T winDos container access panel.
T winDos 21 Push the Ultr aPhase 1 cartridge into Compartment 1 until it locks into po‐ sition. Remove container 2 and push the UltraPhase 2 cartridge into Com‐ partment 2 until it locks into position. Keep the containers in a safe place. They can be used for other types of deter gent.
T winDos 22 Open the Settings menu Y ou have to ent er the type of deter‐ gent being used in the Settings menu. Switch on the washing machine and wait until the standard display lights up.
T winDos 23 Container 1 T ouch the OK sensor . Not defined T ouch the or sensor to select the type of product being used and confirm with the OK sensor .
T winDos 24 Running the first progr amme The T winDos system needs to be primed before you can use the wash‐ ing machine. T o do this you must run a wash pro‐ gramme without laun dr y . Open the stopcock. T urn the progr amme selector to Cot‐ tons .
W ashing environmentally and economically 25 Energy and water consumption – Wat er consumption and energy us‐ age are det ermined by the size of the load. T o make the most of your machine, load the maximum dry load for the progr amme you are using.
W ashing environmentally and economically 26 EcoF eedback Y ou can call up information about the energy and wat er consumption of your washing machine with the EcoF eed‐ back sensor . The following information will appear in the display: – an estimate of the consumption be‐ fore the pr ogramme begins.
1. Pr epare the laundry 27 Empty all pockets. F oreign objects (e.g. nails, coins, paper clips, etc.) can cause damage to garments and to components in the machine. Sort the laundry Sort the laundry by colour and by care label. Most garments have a t ex‐ tile care label in the collar or side seam.
2. Select a progr amme 28 Switch on the washing ma‐ chine Pr ess the button. Pr ogramme selection A. Selecting a programme via the programme select or: T urn the progr amme selector to the requir ed progr amme. The load for the progr amme selected will appear in the display .
3. L oad the washing machine 29 Open the door T ake hold of the door and pull it open. Unfold the laundry and load loosely into the drum. Mixing both large and small it ems gives better wash r esults and also helps distribute the load evenly during spinning.
4. Select progr amme settings 30 Degree of soiling Lightly soiled No visible dirt or stains. P ossibly slight body odour . Normally soiled Visibly dirty and/or just a few slight stains.
4. Select progr amme settings 31 Selecting a spin speed Y ou can alter the pr e-set spin speed of a wash progr amme. Pr ess the Spin speed button. The following will appear in the display: Spin speed rpm 1600 Set the spin speed you want with the and sensors and confirm your selection with the OK sensor .
5. Add detergent 32 There ar e several options for adding de‐ ter gent. T winDos Depending on which agents have been added in Compartments 1 and 2: Miele 2 Phase System The optimum amount of UltraPhase1 and UltraPhase2 will be dispensed au‐ tomatically accor ding to the colour mix of the load.
5. Add detergent 33 Detergent dispenser dr awer T oo little deter gent results in: – Laundry not getting properly clean and with time it may become grey and hard t o the touch. – Greasy particles clinging to laundry . – Limescale deposits on the heater ele‐ ments.
5. Add detergent 34 CapDosing Three differ ent types of capsule are available: = F abric care (e.g. fabric condi‐ tioner , proofing agent) = Additives (e.g. deter gent en‐ hancers) = Deter gent (for the main wash only) Each capsule contains the correct amount for one wash cycle.
5. Add detergent 35 Close the lid and press it firmly shut. Close the deter gent dispenser draw‐ er . The capsule is opened by the act of inserting it in the detergent dispenser drawer . The contents can run out of the capsule if you then remove it from the dr awer before it is used.
6. Start the progr amme - the end of a programme 36 Start the progr amme Pr ess the flashing Start/Stop butt on. The door will lock (the will appear in the display to show this) and the pr o‐ gramme will start. If a delay start time has been selected, then this will count down in the display .
Spinning 37 Final spin speed Progr amme rpm Cottons 1600 Minimum iron 1200 Delicates 900 Woollens 1200* Silks 600* Automatic plus 1400 Down filled items 1200 Shirts 900 Separat e rinse / Starc.
Spinning 38 T o omit the final spin (Rinse hold) Use the Spin speed button to select the setting (Rinse hold). The laun‐ dry is not spun after the final rinse and remains in the final rinse wat er . This helps prevent cr easing if the laundry is not going to be removed from the drum immediat ely after the end of the progr amme.
Delay start 39 With delay start you can choose when you want the progr amme to start. Y ou can delay the start of the progr amme from 15 minut es up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rat es, for example.
Pr ogramme chart 40 Cottons cold to 90°C Max. load 8.0 kg Use for Cotton, linen or cotton mix fabric, e.g. table linen, t owelling, under‐ wear , T -shirts etc.
Pr ogramme chart 41 Delicates cold to 60°C Max. load 3.0 kg Use for Delicate garments made fr om synthetic fibre, mixed fibr e, rayon and viscose. Curtains, including net curtains, specified as machine-washable by the manufacturer . Notes – Dust in curtains usually makes a progr amme with pre-wash advis‐ able.
Pr ogramme chart 42 Down filled items cold to 60°C Max. load 2.0 kg Use for Jackets, sleeping bags, pillows and other down-filled items. Notes – Remove air from the it ems before washing to pr event an exces‐ sive build-up of foam.
Pr ogramme chart 43 Maintenance wash 75°C Empty With frequent washing at low t emperatures ther e is a danger of a build-up of bacteria in the washing machine. Cleaning the washing machine will significantly reduce bacteria, fungus and bio‐ film and prevent the build-up of unpleasant odours.
Pr ogramme chart 44 Outerwear cold to 40°C Max. load 2.5 kg Use for P erformance outerwear (e.g. jackets and trousers) made fr om mem‐ brane fabric such as Gor e- T ex®, S YMP A TEX®, WINDST OPPER® etc. Notes – Zip up or close jackets before washing.
Options 45 Options are select ed and deselected via the relevant butt ons and the display . Pr ess the button for the option you want. The relevant butt on will light up. Not all options are suitable for use with every progr amme. Y ou can only select options which are compatible with the progr amme being used.
Options 46 The following options can be selected in addition to the pr o‐ gramme: None of the options can be selected with pr ogrammes which ar e not listed in the chart below.
Garment care label symbols 47 Washing The figure quot ed in the bucket is the maximum temper ature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted.
Pr ogramme sequence 48 Main wash Rinses Spinning Wat er level Wash rhythm Wat er level Rinses Cottons 2-5 1)2)3) Minimum iron 2-4 2)3) Delicates 2-4 2)3) .
Pr ogramme sequence 49 = Low wat er level = Medium water level = High water level = Intensive rhythm = Normal rhythm = Sensitive rhythm = Ultra sensitive rhythm = Handwash rhythm = Carried out – = Not carried out The washing machine has fully elec‐ tronic contr ols with automatic load rec‐ ognition.
Changing the progr amme sequence 50 Cancelling a pro gramme Y ou can cancel a pr ogramme at any time after it has started: Pr ess the Start/Stop butt on. The following will appear in the display: Cancel programme T ouch the OK sensor . The suds will be pumped away .
Changing the progr amme sequence 51 Adding or removing laundry af‐ ter the progr amme has started Pr ess the Start/Stop butt on. The following will appear in the display: Cancel programme Scroll up the list with the or sen‐ sor to: Add laundry T ouch the OK sensor .
Changing the progr amme sequence 52 Safety lock The safety lock prevents the t empera‐ ture, spin speed or options being al‐ ter ed during a wash progr amme.
Detergent 53 The correct detergent All deter gents produced for automatic washing machines are suitable. F ollow the manufacturer's instructions and dosage recommendations on the pack‐ aging.
Detergent 54 Miele recommended deter gents Miele deter gents and care products have been specially designed for Miele wash‐ ing machines. They are available t o order via the internet at www.
Detergent 55 Recommended detergents in accor dance with Directive (EU) Nr . 1015/ 2010 The recommendations apply t o the temperatur e ranges given in the P rogr amme chart.
Detergent 56 F abric conditioner and liquid starch at the end of the pro‐ gramme Y ou can dispense fabric conditioner ei‐ ther by using automatic dispensing or via the deter gent dispenser compart‐ ment. Automatic dispensing One of the automatic dispensing con‐ tainers must be filled with fabric condi‐ tioner .
Detergent 57 Colour run and dye removers/dyes Do not use colour run or dye re‐ movers in this washing machine. They can cause corrosion in the ma‐ chine.
Cleaning and care 58 Cleaning the drum (Hygiene info) Washing at low t emperatures and/or using liquid deter gent can cause bacte‐ ria and unpleasant odours to build up in the washing machine. Use the Mainte‐ nance wash progr amme to clean the machine.
Cleaning and care 59 Cleaning the siphon tube and the channel Clean the siphon. 1. Remove the siphon from the com‐ partment and rinse under hot running water . Clean the siphon tube at the same time. 2. Replace the siphon. Clean the fabric conditioner channel with a brush and hot water .
Cleaning and care 60 Cleaning the T winDos system The washing machine has a cleaning progr amme for cleaning the T win Dos system containers and the hoses in‐ side the washing machine.
Cleaning and care 61 Cleaning the water inlet filters The washing machine has two filters to prot ect the water inlet valve. These fil‐ ters should be checked every six months or so, or more oft en if there are frequent int erruptions to the water sup‐ ply .
Pr oblem solving guide 62 Minor faults in the performance of the washing machine, some of which may result from incorr ect operation, can be put right without contacting the Service Depart‐ ment. The following guide may help you to find the r eason for a fault, and to correct it.
Pr oblem solving guide 63 The following fault messages appear in the display and the progr amme stops Problem Cause and remedy Water intake See The water inlet is block ed or restricted. Check whether the stopcock is opened pr operly . Check whether the inlet hose is kinked.
Pr oblem solving guide 64 The following fault messages appear in the display at the end of the progr amme Problem Cause and remedy Check dosage Excessive foam ha s built up during washing. Check the amount of deter gent dispensed. With automatic deter gent dispensing check the dosage amount set.
Pr oblem solving guide 65 The following fault messages appear in the display at the end of the progr amme Problem Cause and remedy Align the washing machine The smoothing pr ocess which the laundry undergoes at the end of the pr ogramme could not be carried ou t properly .
Pr oblem solving guide 66 Pr oblems with T winDos Problem Cause and remedy No detergent and/or fabric conditioner was dispensed. Automatic dispensing has not been activated. T ouch the Dos sensor before running the ne xt progr amme. Automatic dispensing will be activated.
Pr oblem solving guide 67 General pr oblems with the washing machine Problem Cause and remedy The machine shakes during the spin cycle. The machine feet are not level. Level the machine and adjust the feet corr ectly . The laundry has not been spun properly and is still wet.
Pr oblem solving guide 68 General pr oblems with the washing machine Problem Cause and remedy At the end of the pr o‐ gramme there is still liq‐ uid in the capsule. The small pipe in the deter gent dispenser drawer onto which the capsule is placed is blocked.
Pr oblem solving guide 69 An unsatisfactory wash result Problem Cause and remedy Liquid detergent does not give the required r e‐ sult. Liquid deter gents usually contain no bleaching agents. They do not remove fruit, coffee and t ea stains. Use the Miele 2 Phase System.
Pr oblem solving guide 70 The door will not open Problem Cause and remedy The door cannot be pulled open during a programme. The drum is locked during a progr amme. Pr ess the Start/Stop butt on. Use the sensor to select Cancel programme or Add laundry .
Pr oblem solving guide 71 Opening the door in the event of a blocked dr ain outlet and/or power failure Switch off the washing machine. Pr ess the drain pump access panel. The panel will spring open. Blocked dr ain outlet If the drain outlet is block ed, a large quantity of water can r emain in the washing machine.
Pr oblem solving guide 72 Clean it thoroughly . Remove any foreign objects (e.g. but‐ tons, coins, etc.) and fluff fr om the fil‐ ter housing. T urn the impeller by hand to check that it r otates freely . Replace the drain filt er correctly and tighten it secur ely .
After sales service 73 Repairs In the event of any faults which you cannot remedy yourself, please con‐ tact: – your Miele Dealer , or – Miele (Contact details for Miele are given at the end of this booklet).
Installation and connection 74 F ront view a Inlet hose (tested t o withstand pres‐ sure of at least 7,000 kP a) b Electrical supply cable c Flexible dr ain hose (with detachable swivel elbow) d Con.
Installation and connection 75 Rear view a Drain hose b T ransport clips for electrical supply cable, inlet and drain hoses c Electrical supply cable d Pr otruding lid for holding when mov‐ ing the .
Installation and connection 76 Installation surface A concret e floor is the most suitable in‐ stallation surface for a washing ma‐ chine, being far less prone t o vibration during the spin cycle than wooden floorboards or a carpet ed surface. Please note: The machine must be level and se‐ curely positioned.
Installation and connection 77 Using the spanner supplied, turn the left-hand transit bar 90°, then pull the transit bar out. T urn the right-hand transit bar 90°, then pull the transit bar out.
Installation and connection 78 T o avoid the risk of injury, the holes for the transit bars must be covered aft er the transit bars have been removed. Plug the holes with the plastic caps as illustrat ed. Secure the tr ansit bars to the back of the washing machine.
Installation and connection 79 Levelling the machine The washing machine must stand per‐ fectly level on all four feet to ensur e safe and proper oper ation. Incorrect installation may incr ease elec‐ tricity and water consumption and may cause the machine to move about.
Installation and connection 80 Building under a continuous work‐ top/ in a kitchen run The washing machine lid cannot be removed. This washing machine (with lid intact) can be pushed under a worktop if ther e is space to do so. Washer -dryer stack The washing machine can be combined with a Miele tumble dryer in a washer- dryer stack.
Installation and connection 81 The water protection syst em The Miele water pr otection system pr o‐ tects all parts of the washing machine from wat er damage.
Installation and connection 82 Connection to the water sup‐ ply The washing machine should be con‐ nected to a mains wat er supply in ac‐ cordance with curr ent local and nation‐ al safety regulations.
Installation and connection 83 Connection to the dr ainage system The machine drains via a dr ain pump with a delivery head of 1 metre*. The drain hose must not be kink ed as this restricts dr ainage. The swivel elbow at the end of the hose can be turned in ei‐ ther direction, or can be detached if r e‐ quired, with a sharp twist and pull.
Installation and connection 84 Electrical connection U .K. All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with cur‐ rent national and local safety r egula‐ tions (BS 7671 in the UK).
T echnical data 85 Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Height for building under 850 mm Width for building under 600 mm Weight Appro x.
Consumption data 86 Load Consumption data Energy in kWh Water in l Duration Residual moisture Cottons 90°C 8.0 kg 2.3 58 2 h 29 min 50% 60°C 8.0 kg 1.35 58 1 h 59 min 50% 60°C 4.0 kg 1.00 49 1 h 59 min 50% * 8.0 kg 0.92 48 2 h 59 min 44% * 4.
Consumption data 87 Note for test institutes * T est progr amme in accordance with EN 60456 and ener gy label with Directive 1061/2010 Consumption data can vary from the nominal values given depending.
Settings 88 Y ou can use the settings menu to alt er the machine's electronics t o suit changing requir ements. Settings can be alter ed at any time. Opening the Settings menu Before you begin, ensur e that: – The washing machine is switched on.
Settings 89 Language The display can be set to appear in one of several differ ent languages. The flag after the wor d Language acts as a guide to pr event a language which will not be understood fr om be‐ ing set. The selected language will be stor ed in memory .
Settings 90 Code The code prevents the washing ma‐ chine being used without your knowl‐ edge. Options – Activate The code is 125 and can be activa‐ ted. When the code has been activated, you have to enter the code aft er switching the washing machine on.
Settings 91 Machine switch-off The washing machine will switch off automatically after the end of the pr o‐ gramme/anti-cr ease phase or after being switched on if no further selec‐ tion is made. Options – 15 minutes (F actory default setting) The washing machine will switch it‐ self off after 15 minutes.
Settings 92 Gentle action Activating gentle action reduces the drum action and is suitable for wash‐ ing slightly soiled items mor e gently . Gentle action can be activated for the Cottons and Minimum iron pr o‐ grammes. F actory default setting: Gentle action is switched off.
Settings 93 Maximum rinse level The water level in the rinse cycle can be permanently set to the highest val‐ ue. This function is useful for allergy suffer‐ ers as it achieves an ex cellent rinse re‐ sult. Wat er consumption will increase. F actory default setting: the maximum rinse level setting is switched off.
Optional accessories 94 Deter gent, fabric care, additives and machine care pr oducts are available for this washing machine. All the products have been designed for Miele washing machines. These and many other useful products can be order ed via the internet at www.
Optional accessories 95 Down items – liquid deter gent suitable for pillows, sleeping bags and down filled items – retains the elasticity of down and feather filled items – retains the br eathab.
.
.
.
United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: 0330 160 6600 E-mail: mielecare@miele.co.uk Internet: www.miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive, Knoxfield, VIC 3180 Tel: 1300 464 353 Internet: www.
M.-Nr . 09 848 440 / 04 en-GB WMG 120 .
デバイスMiele 09 848 440の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Miele 09 848 440をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMiele 09 848 440の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Miele 09 848 440の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Miele 09 848 440で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Miele 09 848 440を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMiele 09 848 440の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Miele 09 848 440に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMiele 09 848 440デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。