MieleメーカーH 5681 BPの使用説明書/サービス説明書
ページ先へ移動 of 84
Operating and installation instructions Oven H 5681 BP, H 5688 BP To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.
2.
Warning and Safety instructions .....................................7 Caring for the environment .........................................1 2 Guide to the appliance ............................................1 3 Features ............................
Main menu ....................................................2 3 Symbols ......................................................2 4 Functions .......................................................2 6 Before using for the first time ..................
Settings .........................................................4 7 Language J ......................................................4 7 Time ...........................................................4 8 Display ....................................
To remove the oven door ............................................6 3 To dismantle the oven door .......................................6 4 To refit the door ...................................................6 7 To remove the FlexiClip telescopic runners .
This appliance conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time.
Technical safety ~ Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations. Repairs and other work by unqualified persons could be dangerous.
~ During installation, maintenance and repair work, the appliance must be disconnected from the mains electricity supply. It is only completely isolated from the electricity supply when: – the mains fuse is disconnected, – the screw-out fuse is removed (in countries where this is applicable), – it is switched off at the isolator.
~ If using alcohol in your recipes, high temperatures can cause the alcohol to vaporise and even to ignite on the hot heating elements. Alcohol should be burnt off before the dish is placed in the oven to avoid this danger. ~ Cover any food which is left in the oven to be kept hot.
~ Do not heat up unopened tins or jars of food in the oven. Pressure can build up and they may explode, resulting in injury or damage. ~ Do not push pots and pans around on the oven floor, as this could damage the surface. ~ Do not lean or sit on an open oven door, or place heavy items on it.
Disposal of the packing material The transport and protective packing has been selected from materials which are envoronmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
H 5681 BP, H 5688 BP a Control panel b Door lock for pyrolytic operation c Top heat / grill element with receiver for the wireless food probe d Steam inlets for Moisture plus e Back panel with air inl.
Oven controls In addition to operating the various cooking programmes to bake, roast and grill, the controls also offer the following: – a time of day display, – a minute minder, – a timer for programming cooking durations, – user programmes, – automatic programmes, – settings that can be customised.
Energy saving features Lighting The oven lighting is set to switch off 15 seconds after the start of a cooking programme (default setting). See "Settings - Lighting".
User instructions The User instructions supplied with your appliance in addition to these Operating and installation instructions contains detailed information about the following: – Automatic progr.
Energy efficiency rating according to EN 50304 This appliance is rated energy efficiency class A in accordance with EN 50304. Tests were carried out using "Fan plus U " with the FlexiClip telescopic runners removed. The catalyser should be switched off during testing, see "Settings - Catalyser - Off next programme only".
FlexiClip telescopic runners The FlexiClip telescopic runners can be clipped into any of the existing shelf runners and pulled out of the oven to their fullest extent.
Changing the position of the FlexiClip telescopic runners Make sure that the oven has cooled down before moving the FlexiClip runners. Take care not to burn yourself on them. To change the position of the FlexiClip runners: ^ Remove the FlexiClip runners from their original position by raising them at the front, then pulling them forwards and out.
Anti-splash insert (depending on model) The anti-splash insert should be placed in the universal tray when grilling or roasting. The juices from the food being cooked collect under the anti-splash insert. This prevents them from spitting and making the oven dirty.
Miele | home communication enabled appliances use the household electrical network c to communicate information about their operational status and the progress of the programme to a master appliance d / e .
The appliance is operated via the display a and the electronic sensors next to and below the display. These react to finger contact. A keypad tone will sound each time a sensor is touched. The volume of the keypad tone can be adjusted or switched off altogether (see "Settings - Volume - Keypad tone").
Display All information about functions, temperature, cooking durations, Auto - matic programmes and settings is shown in the display. After the appliance has been switched on by touching the K sensor.
Symbols The following symbols will appear in the display in addition to the text: Symbol Meaning ! Appears beside an option and is allocated to a sensor C . You select the option you want by touching the sensor beside the dot. p A maximum of 3 options can be shown in the display.
When a function is selected, the following symbols may appear in the display, depending on setting: Symbol Meaning T Duration S Finish R Start time O Programme finished R Rapid heat-up phase, Rapid se.
Your oven has a range of oven functions for preparing a wide variety of recipes. These include: a Top heat/grill element (under the roof of the oven) b Bottom heating element (under the floor of the o.
Function Notes Conventional heat [ a + b ] – For baking traditional recipes, e.g. fruit cake, casseroles. – Also ideal for soufflés. – If using an older recipe or cookbook, set the oven temperature for Conventional heat 10°C lower than that recommended.
To enter basic settings The oven will switch on automatically when it is connected to the electricity supply. Welcome screen A welcome screen will appear in the display, and you will then be requested to select some basic settings which are needed before the appliance can be used.
Cleaning and heating up for the first time Before use, please remove – any stickers from the oven and from any accessories. – any protective foil from the oven front. See "Cleaning and care" for more information. Before using the oven for the first time – take all accessories out of the oven and wash them.
Automatic programmes Your appliance has a wide range of Automatic programmes to enable you to achieve excellent results with ease. Simply select the programme for your food, and follow the instructions in the display. You can call up the Automatic programmes by selecting the "Automat - ic" option from the main menu.
To operate the oven manually, switch the appliance on, select the oven function and temperature, then switch it off again once you have finished cooking. ^ Place the food in the oven. ^ Switch the oven on with the K sensor. The Main menu will appear in the display.
Automatic switch-off can be selected when operating the oven manually. You can also adjust the heat-up phase and the humidity level inside the oven. To select a function ^ Switch the oven on.
Entering the Duration, a Start time or Finish time By entering the Duration, Start time or Finish time, the cooking process can be programmed to switch off, or on and off, automatically. ß Duration When entering the Duration, you are entering the time that the food takes to cook.
Delaying the start with Automatic switch-off We recommend using automatic switching on and off when roasting. However, do not delay the start for too long when baking as the cake mixture or dough will dry out, and the raising agents will lose their effectiveness.
After the cooking programme has finished – The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit. The fan is sensor-controlled and will switch off automatically.
Pre-heating the oven Most dishes can be placed in a cold oven. They will then make use of the heat produced during the heating phase. It is only necessary to pre-heat the oven in a few instances: With.
Activating moisture reduction It is a good idea to use this function when cooking items which are moist on the inside but which should be crispy on the outside, e.g. frozen chips, croquettes or pork with crackling. It is also suitable for deep filled fresh fruit cakes, such as plum or apple cake.
Up to 25 frequently used recipes can be saved under a user-defined name, and then called up again as required. Either – Select the Save as option at the end of running an Automatic programme and give the programme a name of your choice, or – select the User programmes menu .
To create a User programme If programmes already exist under User programmes, the "Create" option has to be selected in order to save additional programme stages to memory. Then continue following the instructions below. ^ Select the "User programme" menu.
The "Moisture plus" function uses a steam injection system. Water is taken into the steam injection system via the tube underneath the control panel on the left. The water is then injected as bursts of steam into the oven compartment during the cooking process.
Automatic programmes Automatic programmes with Moisture plus set the optimium temperature, the degree of moisture and also the duration automatically. At the beginning of the programme you will be prompted to allow a specified amount of water to be drawn into the oven.
Moisture plus d When using the Moisture plus function you will need to enter – the temperature (at least 130 °C), and – the number of bursts of steam.
Using Moisture plus d ^ Place the food in the oven. ^ Select Moisture plus d . ^ Select a temperature. ^ Select Automatic burst of steam or select the number of bursts of steam. ^ Fill a suitable container with the quantity of water specified. Automatic/ 1 burst of steam: approx.
To evaporate residual moisture If there is still water in the steam injection system at the end of a programme or if the programme is cancelled, you will be prompted to evaporate the residual moisture.
To cancel the residual moisture evaporation process After the appliance has been switched on , the prompt to evaporate residual moisture will appear in the display. Touch the sensor next to "Cancel". You will only be able to run functions and Automatic programmes without Moisture plus.
The minute minder can be used to time any activity in the kitchen, e.g. boiling eggs. You can enter a time of up to a maximum of 9 hours, 59 minutes and 59 seconds. You can set the minute minder at the same time as another timed programme, e.g. as a reminder to stir a dish or add seasoning etc.
Your appliance is supplied with a number of standard default settings. To change a setting: ^ Select the "Settings J " option. The list of options will show in the display.
Time The options are: ß Display ß Clock format ß Set If there is a power cut, the current time of day will reappear once power has been restored. The appliance will store this data for approx. 200 hours. After 200 hours it will show " 12:00 " and will need to be re-set.
Main menu You can change the order in which options appear in the main menu. Up to three options can be placed at the beginning of the main menu (excluding Settings).
Cooling fan run-on The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit. ß Sensor controlled (Factory default) The auto sensor will switch off the cooling fan.
Start ß Automatic (Factory default setting) A programme will start automatically approx. 20 seconds after making your last entry without having to select Start. ß Manual If "Manual" has been selected, "Start" will appear at the beginning of each programme and must be confirmed before the programme will start.
Volume Buzzer tones The volume is represented by a bar with seven segments. P P P P G G GM Factory default: Three blocked segments. To change the volume touch the "quieter" or "louder" sensor. If all segments are blocked out the volume is on maximum.
Safety System lock 0 The system lock prevents the appliance being switched on unintentionally, by children for example. The system lock has to be set to "Permitted" (activated) in order to use it. ß Permitted The system lock is active. The 1 symbol appears in the display, as soon as the appliance is switched off.
Units Temperature ß °C (Factory default) ß °F Showroom programme ß Off (Factory default) ß Demo programme ß Continuous loop ß Demo mode This programme is for dealers who want to demonstrate the appliance without the heater elements working.
Miele branded cleaning and conditioning products are available from the Miele Spare Parts Department or via the internet on www.miele-shop.com. , Do not use a steam cleaner to clean the appliance. The steam could reach electrical components and cause a short circuit.
Accessories Remove all accessories as well as the runners and any extra accessories such as FlexiClip runners from the oven interior before starting the pyrolytic cleaning process. This also applies to shelf runners and any optional accessories. The high temperatures needed for pyrolysis will damage the accessories.
Normal soiling Clean the surfaces using a damp Miele microfibre E-cloth or with a clean sponge and a solution of hot water and washing-up liquid. Wipe dry using a soft cloth. Remove any cleaning agent residues as these could reduce the anti-stick effect.
PerfectClean The following have been treated with a special finish called PerfectClean: – baking tray – universal tray – anti-splash insert (if applicable) PerfectClean surfaces have very good anti-stick properties and are much easier to keep clean than conventional oven enamel, if cleaned regularly.
After cleaning, rinse thoroughly with clean water to remove any residual cleaning agents as these can diminish the anti-stick properties. Normal soiling should be cleaned as soon as possible after each use with a soft sponge and a solution of hot water and a little washing up liquid.
Oven interior The oven interior is coated with dark pyrolytic enamel which facilitates cleaning. This is a particularly hard enamel with an extremely smooth surface and very good anti-stick properties. Manual cleaning of the oven interior Allow the oven to cool down before cleaning by hand.
Pyrolytic cleaning of the oven interior Before starting a pyrolytic cleaning process please note the following: Remove any coarse soiling from the oven before you start. Clean the inside of the door (glass). There is a fibre-glass door seal around the oven cavity.
After the pyrolytic process , any debris (e.g. ash) can easily be wiped away. Remember to wait until the oven has cooled down before doing so! Danger of burning. Try not to wipe over the fibre-glass seal when cleaning the oven cavity. It is particularly sensitive and should not be cleaned unless absolutely necessary.
To remove the oven door The oven door is connected to the oven by hinges. Before removing the door, the locking clamps on both hinges have to be released. ^ Open the door fully. ^ To release the locking clamps on the hinges turn them upwards as far as they will go until they are at an angle.
To dismantle the oven door The oven door is made up of four panes of glass and has vents at the top and bottom. When the oven is operating, air is circulated through the door to keep the outer pane cool. If condensate has worked its way in between the glass panes, the door can be dismantled in order to clean in between the panes.
You can now remove the inner and the two middle panes. ^ Gently lift the inner pane up and pull out of the cover strip. ^ Remove the seal. ^ Now gently lift up the upper of the two middle panes and remove it. ^ Gently lift up the lower of the two middle panes and remove it.
^ To reassemble the door: The two middle panes are identical. To ensure they are refitted correctly, one of the corners is more angled than the others. When refitting the lower pane, the more angled corner must be inserted in the left hand retainer at the bottom.
^ Push the inner pane into the plastic strip and insert it in the retainers. ^ Flip the glass pane retainers inwards to close them. To refit the door ^ Hold the door securely at both sides and carefully fit it back onto the hinge guides. Make sure that the door goes back on straight.
^ Open the door fully. ^ Flip both locking clamps back up as far as they will go into a horizontal position. Turn them as far as they will go into a horizontal position. It is essential that the clamps are locked after refitting the door. Otherwise the hinges could work loose, resulting in damage to the door.
To remove the side runners Make sure the oven heating elements are switched off and cool. Take care not to burn yourself on them. ^ Pull the runners forwards out of the holder and remove. Reassemble them in the reverse order , making sure all parts are correctly fitted.
Descaling Only use the descaling tablets supplied with the appliance. These have been specially formulated and are available from the Miele Spare Parts Department or via the internet on www.miele-shop.com. Other types of descaling agents will damage the oven.
Preparation ^ Dissolve one descaling tablet in approx. 600 ml of cold tap water. ^ Place the universal tray on the top shelf level to collect the descaling solution after it has been used. A plastic tube (with clip) is supplied with your oven so that you do not have to hold the container with the descaling agent underneath the water intake tube.
The steam injection system will need to be cleaned at the end of the descaling process to remove all traces of descaling solution. Prompts to do this will appear in the display. Cleaning is carried out by flushing approx. 1 litre of mains tap water through the system.
With the aid of the following guide, minor problems can be easily corrected without contacting Miele. If you cannot resolve a problem following these instructions please contact Miele Service.
Problem Possible cause and remedy The top lighting is not working. ^ Disconnect the appliance from the electricity supply: Switch off and unplug at the socket, or disconnect the fuse, or switch off at the isolator as appropriate. ^ Turn the lamp cover a quarter turn anti-clockwise to release it and then pull it downwards to take it out.
Problem Possible cause and remedy "Maximum operating duration reached" appears in the display. Safety switch-off has been activated. The appliance will be ready for use again after it has been switched off and then back on again. The oven has automatically switched itself off after a cooking programme.
After sales service In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact – your Miele Dealer or – Miele (see back cover for contact details). A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions.
A range of additional accessories as well as cleaning and care products are available for your Miele oven. Depending on product they are available to order from your Miele Dealer, the Miele Spare Parts Department or via the internet on www.miele-shop.
Gourmet oven dish The gourmet oven dish can be placed in the oven directly on the runners. It has non-tip safety notches like the universal tray to prevent it being pulled out too far. It has an anti-stick coating. It is available in two sizes: – HUB 5000-M (internal dimensions: approx.
All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
Dimensions are given in "mm". Appliance and niche dimensions Installation in a base unit Installation in a tall unit * Appliances with glass front ** Appliances with metal front Building-in .
Front dimensions A H 5681: 47.5 H 5688: 45.0 B Appliances with glass front: 2.2 Appliances with metal front: 1.2 Building-in diagrams 81.
, The appliance must not be operated until it has been correctly installed in its housing unit. Otherwise it poses an electric shock hazard. To ensure adequate ventilation to the oven once installed: – do not fit a rear panel into the housing unit. – make sure that the shelf on which the appliance is placed does not touch the wall.
83.
Alteration rights reserved / 22 / 2611 (H 5681 BP, H 5688 BP) M.-Nr. 07 652 780 / 03.
デバイスMiele H 5681 BPの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Miele H 5681 BPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMiele H 5681 BPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Miele H 5681 BPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Miele H 5681 BPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Miele H 5681 BPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMiele H 5681 BPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Miele H 5681 BPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMiele H 5681 BPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
