MieleメーカーKFN 14823 SDedの使用説明書/サービス説明書
ページ先へ移動 of 64
Operating and installation instructions Frost free fridge freezer with dynamic cooling KFN 14823 SD ed KFN 14923 SD ed To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed or used for the first time.
Guide to the appliance .............................................5 Caring for the environment ..........................................7 Warning and Safety instructions .....................................8 How to save energy ....................
Adjusting the interior fittings .......................................3 0 Moving the shelves ................................................3 0 Split shelf ........................................................3 0 Adjusting the condiment tray/bottle shelf .
Installation ......................................................4 8 Location .........................................................4 8 Climate range ..................................................4 8 Ventilation ..............................
a On/Off sensor for the whole appliance and On/Off sensor for switching the refrigerator section on and off separately b Dynamic cooling sensor c Super cool and Super freeze sensor d Sensor for settin.
a Dynamic cooling fan b Interior lighting c Butter and cheese compartment d Bottle rack e Egg tray/Condiment tray f Active charcoal filter holder g Adjustable shelves h Condensate channel and drain ho.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
This appliance complies with all relevant local and national safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time.
Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. A damaged appliance is dangerous. ~ If the connection cable is faulty it must only be replaced by a service technician authorised by the manufacturer to protect the user from danger.
~ The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations.
Correct use ~ Never handle frozen food with wet hands. Your hands may freeze to the frozen food. Danger of frost burn. ~ Do not take ice cubes out with your bare hands and never place ice cubes or ice lollies in your mouth straight from the freezer. The very low temperature of the frozen ice or lollies can cause frost burn to the lips and tongue.
~ Do not use defrosting sprays or de-icers, as they might contain substances which could damage the plastic parts or which could cause the build-up of gases and pose a danger to health. ~ Do not use any oils or grease on the door seals, as these will cause the seals to deteriorate and become porous with time.
Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near to a heat source (radiator, oven). Situated near to a heat source (radiator, oven).
Before using for the first time The stainless steel external and internal surfaces of the appliance have a layer of protective foil to prevent scratching during transportation. ^ Do not remove this foil until the appliance has been installed or built in.
To enable the temperature to get sufficiently cold inside the appliance, allow the appliance to run for a few hours before placing food in it. Do not place food in the freezer section until the temperature is at least -18°C. You switch between the refrigerator and freezer sections with this sensor.
^ Touch the On/Off sensor until the "Cooling" symbol goes out. The interior light will not come on when you open the door and the refrigerator section is switched off. The freezer section remains switched on and the "Freezing" symbol is lit up.
Switching the sensor tones on/off The sensor tone which sounds each time a sensor is touched can be deactivated. ^ Touch and leave your finger on the X sensor. ^ At the same time, briefly touch the On/Off sensor (without letting go of the X sensor). ^ Leave your finger on the X sensor for another 5 seconds until c appears in the display.
You have now left the settings mode. The safety lock indicator X will light up in the temperature display when the safety lock has been activated. Switching off for longer periods of time If the appliance is not going to be used for a longer period of time, e.
It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms.
Setting the temperature The temperatures in the refrigerator and freezer sections are set independently of one another. ^ Select the refrigerator or the freezer section. The "Refrigerator" symbol or the "Freezer" symbol will light up yellow.
Changing the temperature display brightness The temperature display brightness can be adjusted to suit the lighting conditions of the room. ^ Touch and leave your finger on the X sensor. ^ At the same time, briefly touch the On/Off sensor (without letting go of the X sensor).
Your appliance has been fitted with a warning system which ensures that the temperature in the appliance cannot rise unnoticed and to avoid energy being wasted if a door is left open. Activating the alarm system The alarm system is always active. It does not have to be switched on manually.
Door alarm The alarm will sound if a door is left open for more than approx. 2 minutes. The alarm off sensor will light up red and the symbol for the section which has the opened door will flash. The alarm will stop and the indicators will go out as soon as the door is closed.
Super cool The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Switching on Super cool Super cool is particularly recommended for the faster chilling of large amounts of fresh food or drink.
Super freeze Switch the Super freeze function on before putting fresh food into the freezer section. This helps food to freeze quickly and retain its nutrients, vitamins, flavours and appearance. Super freeze is not necessary: – when placing food in the freezer that is already frozen.
Dynamic cooling m When the Dynamic cooling function is not switched on, the natural circulation of air in the appliance will cause different temperature zones in the refrigerator as the cold, heavy air will sink to the lowest section of the appliance.
Different storage zones Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance.
Food which should not be stored in a refrigerator Not all food is suitable for refrigeration, as some food is sensitive to cold. Cucumbers, for example, become glassy, aubergines bitter and potatoes sweet. Tomatoes and oranges lose their aroma, and the peel on citrus fruit hardens.
– Examples of fruit and vegetables which react strongly to the natural gases given off by other types of fruit and vegetables are: Kiwis, broccoli, cauliflower, brussels sprouts, mangos, honeydew melons, apples, apricots, cucumbers, tomatoes, pears, nectarines and peaches.
Moving the shelves The shelves in the refrigerator section can be adjusted according to the height of the food. ^ Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.
Adjusting the condiment tray/bottle shelf ^ Lift the tray/shelf up and out of the stainless steel frame to remove. ^ Push up the stainless steel frame, and remove. ^ Replace the frame at the required height. Ensure that it is securely pushed back into position.
Maximum freezing capacity To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded. The maximum freezing capacity for freezing within a 24-hour period is given on the data plate: "Freezing capacity .
Home freezing Only freeze fresh food which is in a good condition. Hints on home freezing – The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals.
^ Make a note of the contents and the date of freezing on the packaging. Before placing food in the freezer ^ When freezing more than 2 kg of fresh food, switch on the Super freeze function for some time before placing the food in the freezer (see "Super freeze").
Defrosting Frozen food can be defrosted in different ways: – in a microwave oven, – in an oven using the "Fan" or "Defrost" setting, – at room temperature, – in the refrigerator (the cold given off by the frozen food helps to keep the other food cold), – in a steam oven.
Freezer tray The freezer tray is useful for freezing small items such as berries, herbs and vegetables. They can be frozen individually and therefore maintain their shape when defrosted. ^ Space the food out loosely on the tray. ^ Hang the tray in the top or middle freezer drawer.
Refrigerator section The refrigerator defrosts automatically. Condensate and frost can build up on the back wall of the refrigerator section whilst it is in use. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the appliance.
A range of Miele cleaning and conditioning agents is available from the Miele UK Spare Parts Department or via the internet at www.miele-shop.com. Never use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents.
It is important to do this every time the stainless steel surfaces are cleaned, as the stainless steel conditioner protects the surfaces and helps prevent re-soiling. Ventilation gaps ^ The ventilation gaps should be cleaned regularly with a brush or vacuum cleaner.
The active charcoal filters should be changed approx. every 6 months. When the Change active charcoal filter indicator lights up red, the active charcoal filters need to be changed. To change the active charcoal filters ^ Pull the active charcoal filter holder upwards to remove it from the shelf.
If you have delayed changing the active charcoal filters and the indicator is not lit up, you will need to reset the counter when you replace the active charcoal filters via the settings mode. ^ Touch and leave your finger on the X sensor. ^ At the same time, briefly touch the On/Off sensor (without letting go of the X sensor).
Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
. . . the frozen food is thawing because the freezer is too warm. ^ Is the room temperature lower than the ambient temperature for which the appliance is designed? If so, raise the temperature of the room. Operating in a room which is too cold will cause the cooling system to switch off for too long, causing the freezer to become too warm.
..." dn " appears in the temperature display. The demonstration function is activated. ^ Call the Service Department. . . . you cannot switch the appliance off. The safety lock has been activated. . . . the interior lighting in the refrigerator section is not working.
Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes.
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance.
Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.
Do not place any appliance which gives off heat, such as a toaster or microwave oven, on top of this appliance, as this would increase the appliance's energy consumption. This appliance must not be installed directly next to another refrigerator or freezer.
Aligning the appliance ^ To align the appliance, adjust the front feet using the spanner supplied. ^ Also unscrew support a from the hinge plate, to level the appliance door.
Appliance dimensions ABC KFN 14823 SD ed 1820 mm 600 mm 630 mm KFN 14923 SD ed 2010 mm 600 mm 630 mm Installation 50.
The appliance is supplied right-hand hinged. If left-hand door hinging is required, follow the instructions below. To change the door hinging you will need the following tools : – a cross-slotted screwdriver, – a flat-bladed screwdriver, – a selection of Torx screwdrivers, – a spanner.
Before beginning, make sure that the door shelves are empty! Removing the soft-close mechanism for the upper door: ^ Open the upper door. ^ Prise open a from the soft-close mechanism by inserting a flat-bladed screwdriver into the gap from above and easing it off bit by bit.
^ Slide soft-close mechanism bracket f as far as it will go towards the handle side of the door, and undo screws g on the soft-close mechanism. ^ Using a flat-bladed screwdriver, slide the soft-close door mechanism towards the handle side of the door, and lever it out at the side.
Caution. The upper door is not secure as soon as the upper hinge plate is removed. ^ Close the upper door. ^ Undo screws m in upper hinge plate n and pull it upwards and off.
^ Push hinge pin e up and out from underneath. The soft-close mechanism is now no longer fixed to the appliance. ^ Remove panel a . ^ Slide soft-close mechanism bracket f as far as it will go towards the handle side of the door, and undo screws g on the soft-close mechanism.
^ Remove cap l from the bush in the door and refit on the opposite side. Refitting the lower door: ^ Remove cover a by pulling it forwards. ^ Pull cover b off. ^ Screw foot c into hinge pin as far as it will go. ^ With the help of another person, carefully tilt the appliance backwards and pull hinge pin c out.
^ Fit hinge pin i into middle hinge plate k in the lower door. Replacing the lower soft-close door mechanism: ^ Remove cover a from panel b , rotate it by 180° and refit it on the other side. ^ Insert the soft-close mechanism back into the door, starting at the right hand side.
^ Attach panel b to soft-close mechanism bracket d . ^ Align bracket d to the hinge plate, and insert pin e from above so that the right angle fits into the recess. ^ Click cover f back into place. Make sure that cover f fits properly so that the door can be closed without hindrance and the pin is protected.
Replacing the upper soft-close door mechanism: ^ Remove cover a from panel b , rotate it by 180° and refit it on the other side. ^ Insert the soft-close mechanism back into the door, starting at the right hand side. ^ Slide the soft-close mechanism back into the door as far as it will go towards the appliance using a flat-headed screwdriver.
Make sure that cover e fits properly so that the door can be closed without hindrance and the pin is protected. ^ Remove retaining clip g . ^ Replace panel b onto the soft-close mechanism from above, clicking it back into place first at the bottom and then at the top.
Refitting the handle: Please make sure you follow the instructions below carefully when you refit the handle. The door seal will be damaged if the handle is fitted incorrectly. ^ Loosely attach the handle to the opposite side of the door with the two front screws b .
The appliance doors can be aligned with the housing after they have been fitted. In the following illustration the door is shown open to make it easier to see what you have to do. Align the lower door using the long outer slots in the lower hinge plate: ^ Remove centre screw a from the hinge plate.
a Top box b Appliance c Housing unit d Wall The appliance can be installed in a kitchen run. To match the height of the rest of the kitchen, the appliance can be fitted with a suitable top box a . A ventilation gap of at least 50 mm depth must be allowed for behind the appliance across the entire width of the top box for air to circulate.
Alteration rights reserved / 5209 KFN 14823 SD ed, KFN 14923 SD ed M.-Nr. 07 807 310 / 00.
デバイスMiele KFN 14823 SDedの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Miele KFN 14823 SDedをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMiele KFN 14823 SDedの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Miele KFN 14823 SDedの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Miele KFN 14823 SDedで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Miele KFN 14823 SDedを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMiele KFN 14823 SDedの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Miele KFN 14823 SDedに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMiele KFN 14823 SDedデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
