MieleメーカーM.-Nr. 09 704 890の使用説明書/サービス説明書
ページ先へ移動 of 44
Oper ating and installation instructions Cooker hood T o prevent the risk of accidents or damage t o the appliance, it is essential to r ead these instructions before it is installed and used for the first time.
Contents 2 W arning and Safety instructions .......................................................................... 4 Caring for the environment ................................................................................. 13 Modes of operation .
Contents 3 Drilling diagram for wall mounting......................................................................... 34 Connection for air extr action .............................................................................. 35 Condensate tr ap.
W arning and Safety instructions 4 This appliance complies with all relevant local and national safety requir ements. Inappropriat e use can, however , lead to personal injury and damage to pr operty . T o avoid the risk of accidents and damage t o the appliance, please read these instructions car efully before using it for the first time.
W arning and Safety instructions 5 Children must not be allowed t o clean or maintain the cooker hood unsupervised. Please supervise children in the vicinity of the cooker hood and do not let them play with it. Danger of suffocation. P ackaging, e.
W arning and Safety instructions 6 T echnical safety Unauthorised installation, maintenance and r epairs can cause consider able danger for the user . Installation, maintenance and repairs must only be carried out by a Miele authorised t echnician.
W arning and Safety instructions 7 F or safety r easons, this appliance may only be used after it has been built in. The cooker hood must not be used in a non-stationary location (e.g. on a ship). T ampering with electrical connections or components and mechanical parts is highly dangerous t o the user and can cause oper ational faults.
W arning and Safety instructions 8 Using at the same time as other heating appliances that depend on the air from the room Warning - danger of t oxic fumes Great car e should be taken when using the cooker hood at the same time and in the same room or ar ea of the house as another heating appliance which depends on the air in the room.
W arning and Safety instructions 9 In order t o ensure safe oper ation, and to pr event gases given off by the heating appliances from being dr awn back into the r oom when the cooker hood and the heater ar e in operation simultaneously, an underpressur e in the room of 0.
W arning and Safety instructions 10 Correct use Never use an open flame beneath the cooker hood. T o avoid the danger of fire, do not flambé or grill over an open flame. When switched on, the cooker hood could dr aw flames into the filter . F at deposits could ignit e, presenting a fire hazar d.
W arning and Safety instructions 11 Correct installation Refer to the cooker or hob manufactur er's instructions as to whether a cooker hood may be oper ated above the cooker/hob. Safety regulations pr ohibit the fitting of a cooker hood over solid fuel stoves.
W arning and Safety instructions 12 Accessories Only use genuine original Miele accessories with this appliance. Using accessories from other manufactur ers will invalidate the guar antee, and Miele cannot accept liability .
Caring for the envir onment 13 Disposal of the packing material The packaging is designed to pr otect the appliance from damage during transportation. The packaging mat erials used are select ed from materials which are envir onmentally friendly for disposal and should be recycled.
Modes of operation 14 Depending on the model of the cooker hood, the following options are available: Air extr action The air is drawn in and cleaned by the grease filt ers and directed outside. Non-return flap The non-return flap is designed t o prevent the e xchange of r oom and outside air taking place.
Modes of operation 15 Con@ctivity 2.0 function Automatic contr ol The cooker hood has a communication facility which enables the automatic operation of the cook er hood depending on the operational stat e of the hob. T o make use of the communication facility the hob must be fitted with a Con@ctivity 2.
Guide to the appliance 16.
Guide to the appliance 17 a T elescopic ext ension piece b T ower c Canopy d Controls e Grease filt ers f Hob lighting g Control for the hob lighting h On/Off control for the fan i Controls t o select.
Operation (Aut omatic mode) 18 When Con@ctivity 2.0 is activated, the cooker hood always works in automatic mode (see "Activating Con@ctivity 2.0"). T o operat e the cooker hood manually, see "Cooking without Con@ctivity 2.0". Cooking with Con@ctivity 2.
Operation (Aut omatic mode) 19 Cooking process If for example you switch on a cooking zone at the highest power level to heat a pan for frying and reduce the power level aft er approx. 60 to 90 seconds*, a cooking pr ocess is recognised (*60 seconds t o 5 minutes for a HiLight hob).
Operation (Aut omatic mode) 20 Leaving aut omatic mode temporarily T o leave automatic mode tempor arily during cooking: Manually select a different power level, or Manually switch the cooker hood off, or Activate the run-on option on the cooker hood.
Operation (Manual mode) 21 Cooking without Con@ctivity 2.0 (Manual mode) The cooker hood can be oper ated manually if: – Con@ctivity 2.0 is not activated. – Y ou have temporarily deactivat ed Con@ctivity 2.0 (see "Leaving automatic mode tempor arily").
Operation (Manual mode) 22 P ower management The cooker hood features a power management system for switching off the lighting and reducing the fan power level automatically . – If the Intensive setting has been selected the cooker hood will automatically switch down to power level 3 after 5 minutes.
Operation (Aut omatic and Manual modes) 23 Operating hours count er The number of hours the appliance has been in operation is st ored in memory . When the Grease filt er symbol , lights up, the operating hours count er is signalling that the filters need to be cleaned or changed.
Operation (Aut omatic and Manual modes) 24 Reading the filter operating hours counter T o check the percentage of time set already used Pr ess the On/Off control to switch the fan on. Pr ess and hold the operating hours control . The grease filt er symbol lights up.
Cleaning and care 25 Housing General information The surfaces and controls ar e susceptible to scr atches and abrasion. Please observe the following cleaning instructions. All ext ernal surfaces and controls can be cleaned using hot water with a small amount of washing-up liquid applied with a well wrung-out soft sponge or cloth.
Cleaning and care 26 Cleaning interval The grease filt ers should be cleaned regularly (at least every 3 - 4 weeks) to avoid a build-up of grease. Clean them immediately if the Gr ease filter oper ating hours symbol lights up.
Cleaning and care 27 After cleaning After cleaning, leave the filters t o dry on an absorbent surface before replacing them. When removing the filt ers for cleaning, also clean off any residues of oil or fat from the now accessible housing to pr event the risk of these catching fire.
After Sales / Guar antee 28 In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or the Miele Service Department.
Installation 29 Before installation Before installation, it is important to r ead the information given on the following pages as well as the "Warning and Safety instructions" at the beginning of this booklet. Pr otective foil The housing components have prot ective foil around them to pr otect them from tr ansport damage.
Installation 30 Assembly parts.
Installation 31 a 3 protective sheets for use when fitting the tower b 1 exhaust connection for exhaust ducting 150 mm c 1 reducing collar for exhaust ducting 125 mm d 1 non-return flap for fi.
Installation 32 Appliance dimensions The diagram is not dr awn to scale..
Installation 33 ab The shaded area r epresents the wall or ceiling ar ea for the vent cut-out, for fitting the connection socket and on EXT models for feeding the connection cable through t o the external mot or . Connection for air extr action 150 mm, or 125 mm with reducing collar .
Installation 34 Installation recommendations – When deciding on the safety distance between the hob and cooker hood, please note that a distance of 650 mm above electric cookers/hobs may be prefer able to give more working space under the hood. – Account should also be taken of the height of the person who will be using the hood most often.
Connection for air e xtraction 35 Before installation, it is important to r ead the information given on the following pages as well as the "Appliance dimensions" and the "Warning and Safety instructions" at the beginning of this booklet.
Connection for air e xtraction 36 will need to be addr essed. The exhaust ducting will need t o be suitably insulated. Condensate trap In addition to insulating the e xhaust ducting, we recommend that a suitable condensate tr ap is also installed to collect and evaporat e any condensate which may occur .
Connection for air e xtraction 37 Air extr action with external motor T o minimise noise from the mot or in the kitchen, the silencer should be positioned in front of the e xternal motor if possible, or , if the ducting is long, above the exhaust connection inside the hood .
Electrical connection 38 All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with curr ent national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous, for which the manufacturer cannot be held liable.
Activating Con@ctivity 2.0 39 Installing the Con@ctivity 2.0 Stick In order t o use the Con@ctivity 2.0 function, the hob must first be fitted with the Con@ctivity 2.0 Stick. Please read the separ ate installation instructions supplied with the Con@ctivity 2.
Activating Con@ctivity 2.0 40 Then press in turn, – the " " control, – then the " " control, – then the lighting control . If Con@ctivity 2.0 is activated, 2 and 3 will light up constantly . If Con@ctivity 2.0 is not activated, 2 and 3 will flash at the same time.
T echnical data 41 F an motor* 200 W Hob lighting 3 x 3 W T otal connected load* 209 W V oltage AC 230 V F use r ating 5 A Mains connection cable length 1.
.
42.
M.-Nr . 09 704 890 / 00 en-GB DA 422-6 DA 422-6 EXT .
デバイスMiele M.-Nr. 09 704 890の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Miele M.-Nr. 09 704 890をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMiele M.-Nr. 09 704 890の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Miele M.-Nr. 09 704 890の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Miele M.-Nr. 09 704 890で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Miele M.-Nr. 09 704 890を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMiele M.-Nr. 09 704 890の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Miele M.-Nr. 09 704 890に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMiele M.-Nr. 09 704 890デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
