MieleメーカーPW 6161の使用説明書/サービス説明書
ページ先へ移動 of 44
Oper ating Instr uctions W asher PW 6101 PW 6131 PW 6161 PW 6201 T o pr event accidents and machine damage read these instructions before installing or use.
IMPORT ANT SAFETY INSTR UCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Guide to the data plate symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
, W ARNING Read all instructions before installation or use to prevent injury and machine damage. This washer -extractor is only intended for laundry which has not come in contact with flammable substances. Dry cleaning solvents must not be used in this machine.
Electrical Safety GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will r educe the risk of electric shock by providing a path of least r esistance for electric current.
Use Do not let children play in, on or near the washer . Do not let them play with the controls or operate the unit. Close supervision of children is necessary when the appliance is used near children. The drum door glass will be hot when washing at very high temperatures.
a Detergent compartments Pull the handle to open the flap. b Control panel c Emergency Stop b utton Pressing the r ed button tur ns the machine off. d Drum door e Door handle Pull the door handle to open the drum door . Do not use force. The door handle is equipped with an extra safety mechanism to guarantee that the door remains locked.
Operating panel a Display* 1 Hot Wash 194 °F 2 Cottons 140 °F 3 Cottons Intensive 140 °F i FC A The display will go into standby mode 10 min. after a program is started. The display will fade. The circle illumination of the h "Start" button lights up.
Control ke ys ^ Press once to activate the function, pr ess again to deactivate the function. i Manual operation (Used by Miele Service T echnicians) See the Programming manual. FC Functions Press this key to temporarily select another language and/or access the operator level.
1. T urn on the washer ^ Open the on-site water valves (and the supply valves for steam, if relevant). ^ T ur n on the electrical supply at the mains (on site). ^ Press l "On" to turn the washer on. The welcome screen shows. PROFESSIONAL PW 6xx1 Welcome Then the program list is shown.
Maximum dry laundry weights PW 6101 23 lbs / 10 kg laundry 14 lbs / 6 kg wet cleaning PW 6131 30 lbs / 13 kg laundry 18 lbs / 8 kg wet cleaning PW 6161 36 lbs / 16 kg laundry 22 lbs / 10 kg wet cleaning PW 6201 45 lbs / 20 kg laundry 27 lbs / 12 kg wet cleaning 3.
Detergent Only use the correct amount of high efficiency low sudsing detergent. T oo much detergent will cause oversudsing. Dosage Follow the instructions on the detergent packaging to ensure the corr ect usage and dosage amount for your water hardness.
Starc h In the detergent container 1 Hot Wash m Program stop - starch stop Door can be opened. i ü f "Program stop - Star ch Stop" flashes in the display when it is time to add starch to the laundry . ^ Add starch, pr epared according to the manufacturer’ s instructions, into compartment p .
4. Select a program ^ Select a program by turning the jog shuttle (e.g. Program 1 Hot W ash). The following will appear in the display: 16 Extra Drain 1 Hot Wash 194 °F 2 Cottons 140 °F i äF C A ^ See the Programming manual for mor e information. ^ Confirm the selected program by pressing the inner button of the jog shuttle.
6. Select Delay Start (if needed) Use the m "Delay start" button to program the washer to start automatically at a later time. Setting the delay start ^ Press m "Delay Start". The following will appear in the display: 1 Hot Wash 22.
Spin speed The spin speed can be adjusted from 0 - 300 then in 25 rpm increments. Depending on the model of machine and the Program selected the max. spin speed ranges from 600 - 1200 rpms. ^ T ur n the jog shuttle to "Spin speed" and press to confirm the selection.
Canceling a program T o cancel a program, pr ess the f "End" button twice. If the program was canceled with water in the machine or during spinning, the display shows: 1 Hot Wash Program sto.
Skipping program c yc les Cycles of a program in pr ogress can be skipped or repeated. ^ Press the f "End" button to stop the program. 1 Hot Wash Program stop i ü f ^ Press the ü "Skip" button. The display shows the current ar ea, block or step.
K Inf ormation 1 Hot Wash 194 °F Main wash 140 °F Rinse 1 Cold End at 12:35 + im k m K f Press the K "Information" button during the program to show information in the display . 1 Hot Wash Delay start: 10.7.2003 Start time: 9:47 e A For more information press e .
Programs may vary depending on machine type. Program / Display F abric Program c yc le W ash options 1 Hot Wash 194 °F Bed linens and terry cloth laundry made of cotton, linen or mixed fabrics Pre-wa.
10 Delicates Synthetics, silk, rayon Pre-wash selectable Main wash 86°F W ash rhythm "delicate" 2 x Rinse Final spin 1 Min. + i m k 11 Woolens 86 °F Machine washable woolens, sturdy woolens and mixed woolens Main wash limited to 104°F W ash rhythm "gentle" 2 x Rinse Final spin 1 Min.
Program car ds are programmed to a machine type. Empty cards can be used with any machine. ^ Press l "On" to turn the washer on. The Welcome scr een shows.
Language selection The language can be selected with the F flag symbol. The language is set back to its original setting 5 minutes after the program ends or when the door is opened. 1 Hot Wash 194 °F 2 Cottons 140 °F 3 Cottons Intensive 140°F i FC A Press the function button FC .
Liquid dispensing system (Dispensing systems vary) Priming the dispensing pumps a Hose connection socket (in) b Leakage outlet c Hose connection socket (out) d Suction inlet opening e Level indicator When the dispenser container is empty the pump and the machine will shut off.
Priming the dispensing pumps Use the calibration to get liquid detergent to the pumphead. Once calibration is complete run an empty program to get detergent to the machine before actually washing a load of laundry in the machine. Dispensing calibration The dispensing calibration is used to calculate the flow rate of each single dispensing pump.
P eak load cut off When activating the peak load cut off the heat is turned off and the program is stopped. The display shows: 1 Hot Wash Program stop by peak load function The program continues. i ü f When the peak load function ends the program will continue automatically .
After each use Never use high pressur e cleaners to hose down the machine. The machine should be cleaned immediately after use. ^ After use do not shut the drum door , allow the interior to air dry . Cleaning the exterior , Never use abrasive cleaners, scouring pads, steel wool or caustic cleaners on the machine.
V ent grille ^ Regularly check and clean the wash water vent grille at the rear of the machine. Rust The drum and the wash water drum are made of stainless steel. W ater with a high iron content or items like paper clips or ir on buttons which are in the laundry , can lead to rust in the drums.
Drum bearing lubrication (PW 6161 and 6201 only) If the machine needs to be serviced the following message shows: § DRUM BEARING LUBRICATION! Call the Miele Service Department. A ^ Press A "back" to delete the message. The message will show each time the machine is turned on, until a Service T echnician has serviced the machine.
Reasons f or o versudsing Detergent type ^ Only use detergent formulated for use in commercial washers. Detergents for domestic machines are not suitable. T oo much deter gent ^ Follow the detergent manufacturer’ s instructions and adjust the amount to the local water hardness.
P ower failure - Emer gency door release During a short power failure The program r emains in the last position. When power is restor ed the following message appears in the display: y Power failure Program stop Press Start. f ^ Press h "Start" to continue the program.
Display Service interv al ^ Call T echnical Service for maintenance if the display shows the following message after turning the machine on. § Service interval 1 Call the Miele Service Department.
M Water intake fault Call the Miele Service Department. if restart is without success. if ^ Check the water supply and press h "Start". § Heating system fault Program Stop Press Start. if ^ Press h "Start" to continue the program without heating.
In the event of a fault which you cannot correct yourself, please contact: Miele T echnical Service 800-991-9380 T echserv@mieleusa.com When contacting T echnical Service please quote the model (M.-Nr .) and serial number (Fabr .-Nr .) of the machine.
1 Machine type 2 Serial number/Y ear of production * 3 V oltage/Frequency 4 Fuse rating 5 Drive motor 6 Plate diameter/Plate quantity * 7 Drum data 8 Drum diameter/Drum depth 9 Spin speed 10 Drum volume/Laundry dr y weight 11 Kinetic Energy 12 Ex. time to top speed 13 Breaking time 14 Heating * Not valid for this machine.
36.
Installation Instr uctions.
Disposal of the packing materials The packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. T o prevent suf focation, ensur e that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
The washer must only be installed by a Miele authorized service technician. Before installation or service disconnect the power supply to the work area. The minimum dimensions and distance requir ed from the wall, as shown in the installation diagram, must be observed to allow service to be perfor med and the data plate to be viewed.
Remo ving the shipping struts Four red-marked shipping struts, two at the front and two at the r ear , ar e each fixed with 3 hex screws. ^ Remove the shipping struts at the installation location before using the washer .
Plumbing The machine should be connected to two water supply valves, which conform with local and national regulations. Installation must be carried out by an authorized service technician. T o ensure the machine is corr ectly connected please follow the installation plan and the separate installation instructions supplied with the machine.
Electrical connection All electrical work must be perfor med by a qualified service technician in accordance with applicable codes and standards. The connecting terminal is located behind a cover . The machine must only be connected to the voltage and frequency shown on the data plate.
1. Sort the laundry Only use this machine for items that are machine washable, see item fabric car e label. ^ Empty all pockets. 2. T urn the machine on and load the laundry ^ Press the I "On" button to turn the machine on. ^ Open the drum door and load the laundry .
All rights reserved / 2106 06 578 520 / 03.
デバイスMiele PW 6161の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Miele PW 6161をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMiele PW 6161の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Miele PW 6161の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Miele PW 6161で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Miele PW 6161を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMiele PW 6161の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Miele PW 6161に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMiele PW 6161デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
