MinoltaメーカーVectisの使用説明書/サービス説明書
ページ先へ移動 of 45
E INSTRUCTION MANUAL BASIC OPERA TION ADV ANCED OPERA TION ADDITIONAL FEA TURES APPENDIX 2102 OM E 16/10/97 11:26 AM Page 1.
Thank you for purchasing the Minolta V ectis S-100. The V ectis S-100 is an ultra compact IX240 type system camera with variable print-aspect-ratio and magnetic storage of date and exposure information. The V ectis S-100 also incorporates the revolutionary TTL side viewfinder .
3 T ABLE OF CONTENTS 2 FOR PROPER AND SAFE USE .............................................4 NAMES OF P ARTS .................................................................9 QUICK OPERA TION .........................................................
5 FOR PROPER AND SAFE USE 4 Read and understand all warnings and cautions before using this product. W ARNING Batteries may become hot or explode due to improper use. • Use only the batteries specified in this instruction manual. • Do not install the batteries with the polarity (+/-) reversed.
7 FOR PROPER AND SAFE USE 6 This camera is splashproof and can be used in light rain or snow . • Do not place the camera under running water or immerse. Please Note: • When using the camera outdoors in heavy rain, keep the camera protected from the rain.
NAMES OF P ARTS 9 FOR PROPER AND SAFE USE 8 The film used in Advanced Photo System cameras stores some data magnetically . Do not place the cassette on or near anything that creates a magnetic field, such as a television or stereo speakers. This device complies with Part 15 of the FCC Rules.
11 NAMES OF P ARTS 10 Manual-rewind button Exposure- compensation button (65) Date button (52) Red-eye-reduction (34) / Wireless-flash button (66) Select button Exposure-mode button T ripod socket Dio.
13 NAMES OF P ARTS 12 Focus Lamp Data Panel Viewfinder Focus frame Flash lamp (orange) Focus lamp (green) glows blinking Focus is confirmed Focus is not confirmed. Shutter cannot be released Flash Lamp glows Flash is charged blinks fast Flash is charging.
15 QUICK OPERA TION 14 1. Insert battery Open the battery-chamber door using the eyepiece cap. Insert the batteries into the chamber , then snap the battery-chamber door shut. 2. Attach lens Align the red mounting dot on the lens with the one on the camera.
A TT ACHING THE STRAP 17 16 BASIC OPERA TION This section provides the information necessary to operate your camera in most photographic situations. This section covers: • Battery Installation • A.
CHECKING THE BA TTER Y POWER 19 INST ALLING THE BA TTERIES 18 Y our camera uses two CR2 batteries to supply power for all camera operations. 1. Using the eyepiece cap, open the battery-chamber door . • T urn the camera of f before removing the old batteries.
21 A TT ACHING AND REMOVING THE LENS 20 A A F F /M /M 80 80 56 56 1. Remove the body cap. Attaching the Lens 3. Align the red mounting dots on the lens and camera body . 4. Gently insert the lens into the mount, then turn clockwise until it clicks into the locked position.
HANDLING THE CAMERA 23 DIOPTER ADJUSTMENT 22 If you are near or far sighted, you can adjust the eyepiece for your eyesight. The diopter adjustment range is from -3.0 to +1.0 diopters. 1. Center your subject in the focus frame. 2. Press the shutter-release button partway down to focus on the subject.
25 LOADING FILM 24 Use IX240 type film in this camera. • The automatic transport system will load the film, set the film speed, and advance the film after each exposure. • Once loaded, the film chamber cannot be opened until the film is rewound into the cassette (Film Chamber Lock).
27 LOADING FILM 26 The film speed appears in the data panel, then the film is advanced to the first frame. • If the shutter-release button is not pressed after loading, an unexposed ( ● ) roll can be removed by pressing the rewind button, then the film-chamber release.
29 FULL Y AUT OMA TIC OPERA TION 28 Full Auto is the camera’ s standard operating mode and is suited for use in almost any situation. • Press the program-reset button to set the camera to fully automatic operation (Full Auto) at any time. See page 71.
FOCUS HOLD 31 SPECIAL FOCUSING SITUA TIONS 30 The camera may not be able to focus in situations like those described below . When the focus lamp blinks, use focus hold (page 31) or manual focus (page 56). See page 13 for an explanation of the focus signals.
33 USING THE BUIL T -IN FLASH 32 In P mode, the built-in flash will pop-up automatically when the shutter is pressed partway down. Once the flash is up, it will fire when necessary . • The shutter will not release until the flash is charged. • Select flash cancel ( ) when you don’t want the flash to fire.
REWINDING THE FILM 35 USING THE BUIL T -IN FLASH 34 Light reflecting from your subjects eyes may produce the ef fect known as red-eye. Use the built-in flash’ s red-eye- reduction mode to produce more natural looking photographs by reducing the red-eye effect.
SUBJECT PROGRAM SELECTION 37 ADV ANCED OPERA TION Refer to the individual sections as you increase your familiarity with the camera. Each function can be explored independently after the Basic Operations section has been mastered.
LANDSCAPE MODE 39 PORTRAIT MODE 38 Portraits have the greatest impact when the subject is separated from the background. Portrait mode sets the camera to achieve this effect, leaving you free to capture the perfect expression. Press the program-select button until the subject- program pointer is under .
SPORTS MODE 41 CLOSE-UP MODE 40 Accurate focusing and a large depth of field are required for good close-up photographs. Close-Up mode sets the camera to obtain the greatest depth of field possible at a shutter speed fast enough to prevent blur due to camera shake.
PHOTOGRAPHING NIGHT SCENES 43 NIGHT PORTRAIT MODE 42 Night portraits require the camera’s flash exposure to be balanced with the background exposure. In Night Portrait mode, the camera sets the largest possible aperture with a longer shutter speed, allowing the background to appear in the photograph.
A MODE - APERTURE PRIORITY 45 CREA TIVE EXPOSURE MODES 44 Y our camera has three exposure modes: Aperture Priority (A- mode), Shutter Prioity (S-mode), and Program (P-mode). In P-mode, the camera sets the aperture and shutter speed automatically . P-mode is set when Full Auto operation is selected.
47 A MODE - APERTURE PRIORITY 46 A Mode Flash When the built-in flash is up, it will fire each time a picture is taken. When the built-in flash is down, it will not fire. Press the flash-mode button to turn the flash on. • The camera will automatically set the shutter speed to 1/90 (flash sync.
49 S MODE - SHUTTER PRIORITY 48 In S mode, you select the shutter speed and the camera automatically sets the aperture required for proper exposure. Use S mode when you want to control the blur caused by subject movement. 1. Open the control-panel door .
S MODE - SHUTTER PRIORITY 50 Shutter Speed Control In addition to controlling the duration of the exposure, shutter speed determines how moving subjects will appear in the final image. Depending on the speed of your subject, slow shutter speeds will make a moving subject appear to flow , creating a feeling of motion.
53 DA TE / TIME IMPRINTING 52 Setting the Date / Time Y our camera records date and time information on the film’ s magnetic data strip. The recorded information is read at the photo lab and imprinted on the back of your photographs. • Some labs cannot print date and / or time information on the front of your photographs.
55 DA TE / TIME IMPRINTING 54 Changing the Date / Time Format 1. Open the control-panel door , then press the date button. 2. Press and hold the select button until all items in the date display blink. 3. T urn the control dial to change the display format.
SELF-TIMER 57 MANUAL FOCUS 56 1. Press the focus-mode button. will appear in the data panel. When autofocus is not suitable and focus hold is not possible, focus the lens manually . The autofocus system will monitor focus and indicate when a subject in the focus frame is in focus.
REMOTE-CONTROL (optional) 59 CONTINUOUS-DRIVE MODE 58 1. Press the drive-mode button until appears in the data panel. In this mode, the camera continues to release the shutter and advance the film as long as the shutter-release button is held down. 2.
61 REMOTE-CONTROL (optional) 60 • T o cancel, press the remote-control button again, or turn the camera off. • If the camera’s remote-control receiver does not blink, the camera did not receive the signal.
AF ILLUMINA TOR 63 REMOTE-CONTROL (optional) 62 Changing the Battery The remote control uses a 3V lithium battery (CR2032). When pressing the remote-control buttons does not release the camera’s shutter , the battery must be replaced. 1. Pull out the battery chamber and remove the old battery .
65 EXPOSURE COMPENSA TION 64 This function lets you compensate exposure +/- 3 EV in 1/2 EV increments when the camera’s metering system may not be able to accurately determine exposure. More exposure is recommended for very bright scenes, such as snow or beach scenes.
67 WIRELESS / REMOTE OFF-CAMERA FLASH 66 Built-in Flash Wireless / Remote Flash Wireless / Remote Of f-Camera Flash is available with the Minolta 5400HS, 5400xi, and 3500xi accessory flashes. Wireless / Remote flash give you access to the greater range and creative control available with an accessory flash.
69 WIRELESS / REMOTE OFF-CAMERA FLASH 68 T aking Pictures in Wireless / Remote Flash Mode 1. Position your camera and 3500xi flash unit using the information on this page.
PROGRAM-RESET BUTTON 71 APPENDIX 70 The program-reset button quickly returns the camera to fully-automatic operation. Pressing the program-reset button will set the camera as follows: Exposure mode Fo.
73 LAB SERVICES 72 T o receive the best possible prints, take your film to a photolab displaying the Certified Advanced Photo System Photofinishing Service logo. Photofinishers displaying this logo have been certified according to Advanced Photo System guidelines.
75 ACCESSOR Y INFORMA TION 74 This camera is designed to work specifically with lenses, and accessories manufactured and distributed by Minolta. Using incompatible accessories with this camera may result in unsatisfactory performance or damage the camera and accessories.
77 CARE AND ST ORAGE 76 Cleaning • If the camera or lens barrel is dirty , wipe it gently with a soft, clean, dry cloth. If the camera or lens comes in contact with sand, gently blow away loose particles - wiping may scratch the surface.
79 TECHNICAL DET AILS 78 Camera T ype: IX240 type system camera Lens: Minolta V lens AF System: T ype: TTL phase-detection system Sensor: One CCD line sensor Focus Modes: Autofocus/Manual focus AF Mode Selection: Single-frame / Continuous drive Sensitivity: EV 1-19 (ISO 200) AF Illuminator: T ype: Flash Range: 0.
81 TROUBLE-SHOOTING 80 Refer to these pages to determine the cause of a problem you are experiencing with your camera. If the information does not cover the problem you are experiencing or the condition continues, contact your nearest Minolta Service Facility .
83 CAMERA W ARNINGS 82 MODE DISPLA Y ACTION P AGE CAUSE and blink All Batteries have been replaced. Err appears All Camera operation malfunction. appears All Lens is not attached, or is attached improperly . 1000 or 30” blinks A Required shutter speed is beyond the range of the camera.
85 QUICK REFERENCE GUIDE 84 Program Reset Focus Hold Setting manual fill-flash Setting flash cancel Setting red-eye reduction Selecting a subject program mode T aking night portraits T aking night sce.
Minolta Co., Ltd. 3-13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541, Japan Minolta GmbH Kurt-Fischer-Strasse 50, D-22923 Ahrensburg, Germany Minolta France S.A. 365 Route de Saint-Germain, F-78420 Carrieres- Sur-Seine, France Minolta (UK) Limited Rooksley Park, Precedent Drive, Rooksley, Milton Keynes, MK13 8HF , England Minolta Austria Ges.
デバイスMinolta Minolta Vectisの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Minolta Minolta Vectisをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMinolta Minolta Vectisの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Minolta Minolta Vectisの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Minolta Minolta Vectisで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Minolta Minolta Vectisを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMinolta Minolta Vectisの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Minolta Minolta Vectisに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMinolta Minolta Vectisデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
