MitsubishiメーカーCS-35305の使用説明書/サービス説明書
ページ先へ移動 of 92
_,_ MITSUBISHI Television, Owner's Guide.
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNI--L.
MITSUBISHI OWNER'S GUIDE Table of Contents Important Safeguards ................................................................ 3 Preface: Welcome to Mitsubishi ............................................. 5 Summary of Special Features ........
Using the Advanced Features ......................................... 59 Setting the timer .......................................................... 60 Using the parental lock ............................................... 61 Using the Super Quick Viewtuning .
IMPORTANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TV RECHVER AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE _1_ RECEIVER. 1. Read Instructions All the safety and operating instructions should be read before the appliance is operated.
14. Power Lines An outside antenna system should not be located in the vicinity ofoverhead power lines or other electric lightor power circuits, orwhere it can fall into such power lines or circuits.
PREFACE Welcome to Mitsubishi Congratulations on your purchase of this Mits_:bishi TV. Your TV is designed for superb viewing pleasure as well as continued_ reliability. To familiarize you with your TV and owner's gnide, we suggest that you read through the preface, which provides t:.
Summary of Special Features Your top rated Mitsubishi TV delivers: • 181-Channel Capacity .... programs up to 181 channels, ensuring your continued viewing pleasure as cable sem4ces continue to expand. • Two-Speaker Sound System --- a special speaker system that produces clear stereo sound.
€ Unpacking Your TV What you will find As you unpack your new TV, please check t:o be sure that along with the TV, the following items are included: • an owner's guide containing a warranty', • a registration card, • a remote control transmitter, and • a set of two AA size batteries for the remote control.
What's in Each Chapter Here's what you will find in this owner's guide: Chapter 1, "Getting to Know Your TV," introduces you to the location and functions of the buttons and controls of your TV. Chapter 2, "Connecting Your TV," explains how to connect a VCR, antenna, decoder box and other equipment to your _[V.
Some Conventions Used in this Guide Mitsubishi has gone to great effort to provide users with an easy-to- follow, useful owner's guide. You will find tha_ different types of information are treated in different ways.
.
_ CHAPTER ONE Getting to Know Your TV Now that you've unpacked your TV, read through the safety information, and glanced at the overview explaining how this owner's guide is organized, it's time to become Familiar with the buttons and controls you'll be using when you operate the TV.
Overview of the Control Panel Buttons (!) through 0 are lecated here The STRENGTH!DIRECTION swi Bches (_)) are located here ] 1 _-"_ 2 S STRENGTH DIRECTION 12 Chapter 1: Getting to Know Your TV.
(_) power button (POWER) Use this button to turn the TV on or off. When you turn the TV on, the power indicator will light in green. ® program timer indicator This indicator lights up in green when y.
Overview of the Remote Control Getting ready to use the remote control installing the batteries O Take the box containing two AA size batteries from the packing bag. O Remove the back cover of the remote control by pushing in the direction of the arrow.
some do's and don'ts To ensure that your remote control will continue working properly, follow these guidelines: • Don't press two or more buttons at the santo time, unless specifically instructed to do so in this owner's guide. • Don't allow the remote control to get wet or become heated.
Remote control buttons and functions @ @ @ © ® @ ® @ @ "IV CABLE VCR-A VCR-B • REC STOP PAUSE ©__- REW PLAY FF VOLUME INPUT CHANNEL MENU CANCEL DISPLAY HOME CD _.
Q ® ® ® ® ® ® ® ® ® select buttons Use these buttons to select the component you wish to operate: the TV, a cable decoder box, or a VCR. These buttons are also used to set up your remote control for your particular brand of cable box or VCR. VCR buttons These buttons can be used to control VCRs.
Remote control buttons and functions (cont.) © @ @ audio and video controls These buttons are used together to adjust, audio and video functions (other than volume) with a two-step process: you use the audio or video button to select a function, then you _:se the adjust up!down buttons or _ght/left button:_ to adjust it.
® @ ® ® ® display button (DISPLAY) Use this button to view an on-screen sumraary of the current TV settings and the displays related to Extended Data Services (XDS). home button (HOME) Press this button to return to regular TV _4ewing from the on- screen displays and menus.
.
_ CHAPTER. TWO Connechng Your TV This chapter offers step-by-step instructions for completing the most common hook-ups. It contains the follcv_Lng sections: 0 Overview of the Back Panel t Basic Connec.
Overview of the Back Panel VHF/UHF (75_) 0 S-VIDEO (MONO) @ _>Important: @ antenna terminal Connect a cable antenna or a VHF/UHF antenna here. @ video output terminal Use these terminals to "send out" the TV's video signal to a VCR, a video copy processor, etc.
Important: @ S-VIDEO input terminal Use these terminals to "bring in" an S-video signal frora a VCR or disc player into the TV. If you connect S-video equipment, the standard video input will be unavailable. @ video input terminal Use this terminal to "bring in" a video signal from a VCR or another component into the TV.
Basic Connections This section explains the basic connections you will need t_ make between your TV, antennas, and VCR. You _ill see there are different connections shown depending on th,_ type of antenna you are using and whether or not you have a decoder box.
TV + antenna or cable without a decoder box equipment you will need If you have a standard 75-ohm coaxial cable, you will not need additional equipment. If your antenna has two leads (called flat twin leads), you'll need: • One 75-300 ohm transformer.
TV + cable with a decoder box equipment you will need Use this hook-up if you need a decoder box to descramble cable channels. When you complete this hook-up, you should set up your remote control to operate your cable box (see page 38). To complete the hook-up, you'll need: • One length of 75 ohm coaxial cable.
TV + separate UHF and VHF antennas equipment you will need If UHF and VHF signals are brought into your home with two separate antennas, you'll need to combine the antennas in order to connect them to the TV. To do this you will need a UHF/VHF combiner.
TV + VCR + antenna or cable without a decoder box equipment you will need You may want to connect a VCR along with yoar antennas or cable. To complete this hook-up, you may need the following equipmen.
_ Important: _'Important: _Important: procedure (See illustration on the following page.) 0 Connect the incoming cable or antenna to the ANTENNA IN terminal on the VCR. O Connect one end of a coaxial cable to the ANTENNA OUT terminal on the VCR. Connect the other end of the coaxial cable to the antenna terminal on the TV.
TV + antenna or cable without a decoder box (cont.) 0 Incoming Cable {_]]_ or Antenna O Cable O -- White Lead ==_]33= O -Red Lead VCR Rear Terminals IN Antenna OUT O AUDIO OUT ®. VIDEO OUT S-VIDEO OUT lI° ,° l _) _Connect one Yellow Lead -- _ -- _ or the other _) J but not both TV Rear Terminals ----" • /-- .
TV + VCR + cable with a decoder box equipment you will need This hook-up will allow you to watch a non-scrambled channel while you are recording another channel. Wl:en you complete this hook-up, you should set up your remote control to operate your cable box (see page 38).
TV + VCR + cable with a decoder box (cont.) Important: Important: Important: procedure O Connect the incoming cable to the IN terminal on the two-way splitter. O Connect a coaxial decoder box to one of the OUT terminals on the two-way splitter. Connect the other end of this cable to the antenna terminal on the back of the TV.
@ Incoming Cable l AUDIO OUT VIDEO OUT S-VIDEO OUT Antenna L (_) (_ Cable Decoder Box E_C[_ q Rear Terminals OUT _N VCR Rear Terminals OUT TV Rear Terminals Basic Connections 33.
'IV" + audio system equipment you will need To hook up an audio system, you will need: • One set of RCA pin audio cables. procedure 0 Connect the audio cables to the AUDIO OUTPUT terminals on the back of the TV. Use the red cable to connect the right (R) channel and the white cable to connect the left (L) channel.
R CHAPTE THREE Operatmg i'our TV Now that your TV is connected to the cable, antenna, or external components, it's time to enjoy your equipment. This chapter will explain how to operate the TV, first focusing on functions that are basic and easy and then explaining some advanced features.
t Getting Started This section is designed to get you started enjoying your new TV. If you follow these procedures one by one, you _:[1 soon begin discov- ering everything your television can do.
Adjusting the color purity Because your Mitsubishi color television has a large screen picture tube, the earth's magnetic field can cause discolored patches on the edges of your screen. To correct this, follow the instructions below. O Turn off the TV set.
Using the remote control to operate cable boxes and other brands of VCRs operating Mitsubishi components This TV's remote control comes programmed to operate Mitsubishi TVs and VCRs. The select buttons (across the top of the remote ) determine which component the remote control will operate.
If yourVCR is this brand... Mitsubishi (A) Mitsubishi (B) Canon Emerson Funai GE Goldstar Hitachi JVC ...enter this code 01 02 03 04, 05 06 03 07 08 09 If your VCR is this brand... Magnavox Multitech NEC Panasonic Philco Philips Quasar RCA Sanyo ...enter this code 03, 10, 11 O6 12 O3 03, 10 03, 10, 11 03 08, 13, 20 14 If your V(: R is this brand.
Using the remote control to operate cable boxes and other brands of VCRs (cont.) _Important: Important: _Important: Sometimes manufacturers will c.hange their products, or they may use more than one code. If this is the case, your remote may not be able to operate your VCR or cable box.
Turning the TV on/off _Important: _Important: Before using the remote control to operate the TV, press the "TV" select button on the remote control. Use the POWER button on either the control panel or the r,emote control to turn the TV on and off.
Selecting the input source If you connected a component, such as a VCR, camcorder, or laserdisc player, to your TV, you will need to change the !input source to view the signal from the component. To select an input source, press the input butto]_ (INPUT) o_] the control panel or on the remote control.
Changing channels Important: Your TV offers you four ways of changing channels once their numbers have been programmed into channel memory: • selecting a channel sequentially using the channel contr.
Changing channels (cont.) ,K:_c:::f: '!ooo © I_ooo changing channels sequentially To change channels: O Press one of _he channel con- trols (CH, CttANNEL) on the control pane] or on the remote control. The TV will automati- cally tune Lothe next memo- rized channel.
_Important: using the Quick View option Quick View allows you to memo- rize a particular channel and switch to it quickly. O Tune 1:o the channel you wish to memorize. O Press arLd hold the QV button for about 3 seconds. _/Vhen you release 1,he button, tile channel number will appear on the screen, indicating that you have memcri:_,ed that channel.
Understanding the on-screen menus, One of the distinctive features of this TV is an on-screen menu system that provides step-by-step instructions for using some of the TV's special capabilities. When using any of the on-screen menus, please keep the following in mind: • The on-screen menus will clear if no item is selected within ,5 minutes.
Setting the clock Your TV contains an internal clock to indicate the current time. If there is a broadcaster in your area that is sending the CU_Tent time along with its regular broadcast signal, then your TV can automati- cally set its clock with this signal.
Setting the clock (cont.) Important: Set the clock Auto clock On Day Monday Clock 10:00 am Time zone Eastern • Daylight savings On Use ADJUST to select• Then press ENTER. Press MENU to return to First Time Set-Up Menu. If you follow daylight savings time, set "Daylight savin_:s" to "On" using: the ADJUST but- tons.
Memorizing channels You can use the menus to automatically memorize the channels your TV can receive. Once channels are memorized, you can scan through them using the channel controls on the remote control or on the front panel. Q First Time Set-Up Set the clock _, Memorize channels Add/delete channels Use ADJUST to select.
Adding and deleting channels Either "In memory" or "Not in memory" will appear. After all available channels have been programmed automatically, channels with weaker signals can be added or deleted with the following procedure. Q First Time Set-Up Set the clock Memorize channels • Add/delete channels Use ADJUST to select.
Renaming the input This feature allows you to rename the externa:[ input. For example, you might want to name the input "VCR" or "I-}ISC." The name you give the input will appear on the on-screen display. ,_ "IV Main Menu Q First Time Set-Up [_] Customize Viewing I_ Advanced Features Use ADJUST to select.
Selecting the menu language This TV allows you to display the on-screen menus in one of tlhree languages: English, Spanish, or French. Customize Viewing Rename the input: • Select Language Use VLdeo mute Use ADJUST to select. Then press ENTER. Press MENU to return to TV Main Menu.
Using video mute When you use the video mute fllnction, your TV will display a blue screen whenever it is receiving a very weak TV signal or a weak signal from a VCR. If you want to try. viewing a weak signal, you can turn the video mute off. Customize Viewing Rename the input: Select Language b, Use Video mute Use ADJUST to select.
Adjusting the sound _> Important: Your TV allows you to customize and adjust the settings of its audio functions. This section giw_s you descriptions of each audio function, then explains how to adjust the functions.
Adjusting the sound (cont.) The "Speaker" function allows you to turn the TV's internal speakers on or off. • Choose "On" if you want to play the TV's sound through the TV's built-in speakers. • Choose "Off' if you connected your TV to an audio system.
Adjusting the picture Your TV allows you to customize and adjust the settings of its video functions. This sections gives you descriptions of each video function, then explains how to adjust the functions. descriptions of video functions The "Tint" function lets you adjust the proport,ion of red to green in the picture.
Using the closed caption decoder _Important: _Important: _Important: Many broadcasters now supply closed captioning information along with their regular broadcasts. Your TV can decode that information and display it on the TV screen. There are two types of captioning that broadcasters can send: "standard" and "text.
Using the closed caption decoder (cont.) Important: oooC _1 o I_ O00c _OOO_ _000 _z_ 0 e adjusting the closed captioning decoder Vv]aen adjusting the closed caption decoder, you can use the buttons on the remote control or on the control panel.
Using the Advanced Features This section explains how to use some of the more advanced func- tions. You'll learn about: • Setting the timer, • Using the parental lock, • Using the Super Quick View tuning, and • Selecting an advanced PIP function.
Setting the timer [>Important: This special feature allows you to program the TV to turn on automatically at a preset time. To set the timer: _,, TV Main Menu Q First Time Set-Up Customize Viewing [_ Advanced Features Use ADJUST to select. Then press ENTER.
Using the parental lock This special feature allows you to lock the entire TV or lock an individual channel. (You cannot lock the TV and lock an individual channels at the same time.) When you turn on the lock, you enter a 4-digit secret code that will allow you to turn cff the lock later.
Using the parental lock (cont.) [_Lock the TV The lock is now off. Enter your personal code using NUMBER buttons. Then press ENTER to set the lock. Press MENU to return to Advanced Features Menu. i,_ Lock the "IV • Start : 2:00pm End : 3:00pm Use ADJUST to select.
[_ Lock the channel The lock is now off. Enter your personal code using NUMBER buttons. Then press ENTER to select the channels. Press MENU to return to Advanced Features Menu. Lock the channel _. ... ... ... Use ADJUST to select. Then press ENTER. Press MENU to retum to Advanced Features Menu.
Using the parental lock (cont.) _Important: canceling the parental lock Parental lock 0-V) Now, the lock is on. Enter your personal code using NUMBER buttons. Then press ENTER to change the lock. Press MENU to return to the Advanced Features Menu. O Press the MENU button.
Using the Super Quick View tuning Super-Quick-View allows you to cycle through a list of up to ten channels with the SQV button. You use the menus to add channels to the list or to remove channels from the list. You can also acid channels to the list using only the remote control.
Selecting an advanced PIP function When you are using the PIP features, there are special functions you can use. Before using these advanced functions, you need to choose one in the menu. These advanced functions are: • TV Still, • Snap-shot, or • Replay.
_ CHAPTER FOUR Using the S-pecial Features In addition to the basic and advanced features explained in the previous chapter, this TV offers the user several special features not generally available on other brand TVs. This chapter will explain how to use these distinctive features.
Understanding the On-Screen Displays The first time you press DISPLAY, you will sea display like this, if your main source is an antenna: OR The first time you press DISPLAY, you will see a display li.
€ Using the Off-Timer This special function allows you to set the TV to turn off automati- cally. You can set the TV to turn off after a period of time ran_ng from 10 to 120 minutes (in ten minute intel"q_ds_,. In this section you'll learn: • Setting the off-timer, and • Changing or canceling the off-timer.
Setting the off-timer @ _:_ Ol c_ c_ c_ cD 000o c=O00 _ ",,_ O O 0 U L__ _]} Press the off.-timer button. (OFF-T) on the remote control. P>Important: TV Off timer 120 min. O Select how long you want the TV to stay on by repeatedly pressing the off:timer button (OFF-T).
Changing or canceling the off-timer TV Off timer 10 min. O Press the off-timer butt;on (OFF-T) oll the remote control. An on-screen display will indicate the amount of time remaining until the TV will turn off. O Continue pressing the off-timer button (OFF-T) repeatedly to change the remaining time or cancel the off-timer.
Using the Advanced Picture-in-Picture (PIP) Modes The special features of this TV include the advanced picture-in- picture (PIP) modes, which allow :you to view and manipulate the images of two different sources at the same time.
Activating the PIP image PIP ooo0 _]) Select the. number of the TV channel you want to view by using the channel control (CHANNEL). O Press the PIP button.
Selecting the source of the PIP image SOURCE O Turn your VCR on and select a channel on the VCR that is different than the channel you see on your TV screen. O Press the source button (SOURCE) on the remote control repeatedly to select the source of the PIP image: TV or Input.
Exchanging the PIP image and the main image Press the ENTER button to exchange the contents of the main (background) image and the PIP image. 023 ESPN Stereo & SAP SQV Input input ¢23 Moving the PIP image @c:_o 0ooO dmb _1 o I)_ qmmJ OOOO oO00 oOO0_ _0 o Press the ADJUST (up/down) buttons or right/left buttons to move the PIP image.
Freezing the PIP image [] Use Advanced PIP ), Current setting : "IV Still Use ADJUST to select. Then press ENTER. Press MENU to return to Advanced Features Menu. O Select "Use Adwmced PIP':' in the "Advanced Features" menu and set it to "TV Still.
Using the Snap-shot feature [_Use Advanced PIP Currentsetting: Snap-shot Use ADJUST to select. Then press ENTER. Press MENU to return to Advanced Features Menu. ooo0 OOOo 0000 c:::::_ O o O Select "Use Advanced PIP" in the "Advanced Features" menu and set it to "Snap-shot.
Using the Replay feature [] Use Advanced PIP • Current setting : Replay Replay speed : 1 Use ADJUST to select. Then press ENTER. Press MENU to return to Advanced Features Menu. [] Use Advanced PIP Current setting: Replay • Replay speed : 1 Use ADJUST to select.
_ CHAPTER FIVE Troublesl oot-ing Even though you're now familiar with the basic and advanced operations of the TV, you may rlln into trouble from time to time as you become accustomed to the TV. This chapter offers solutions to some of the common problems you may encounter.
Troubleshooting (cont.) Problems Possible Solutions For More Information The remote control doesn't work. Check that the batteries are installed correctly. Check that the select button is set to "TV." Be sure that you are point- ing the tip of the remote control toward the TV from a distance of no more than 20 feet.
Problems Possible Solutions For More Information On-screen displays appear each time you adjust a function. • This is part of the normal operation of the TV. See "Understanding the On- Screen Displays" in Chapter 4 for a full explanation of the on-screen displays.
Caution and care Warning: ! _> Important: _Important: Don't leave stationary images on-screen for more than 10 minutes. These images can scar the TV, causing permanent damage to the picture tube.
Calling for service If you are unable to correct a problem with your TV, consult your MITSUBISHI dealer or MITSUBISHI Authorized Warranty Service Center. Do not adjust any controls not described in this owner's gllide. Do not remove the protective back cover of this unit.
.
APPENDIX Procedure for Bypassing the Parental Lock Cut along dotted line and file after reading. After you lock the TV, you will need the secret code in order to: • view the locked TV, or • cancel the lock. If you forget the code, you can view the locked TV without entering the code.
.
Index A A/V reset button .................. 13 adding channels .................. 50 adjust buttons ............... 18, 19 advanced features ............... 59 advanced PIP ...................... 66 antenna connecting .................. 25, 27 terminal .
power button ................. 13, 17 program timer indicator ..... 13 programming channels ....... 49 Q quick view ............................ 45 quick view button ................ 17 R rear panel ............................ 22 remote control buttons .
MITSUBISHI COLOR TELEVISION OR COLOR MONITOR LIMITED WARRANTY MITSUBISHI CONSUMER ELECTRONICS AMERICA, INC. ("MCEA") warrants to the original purchaser of this television or monitor if purchased from an authorized MITSUBISHI Audio/Video Dealer that, should it prove defective by reason of improper workmanship andtor material: a.
,,,_, MITSUBISHI MITSUBISHI CONSUMER ELECTRONICS AMERICA, INC. 6100 Atlantic Boulevard Norcross, GA 30071-.1305 _D1995 Mitsubishi Consumer Electronics America, Inc.
デバイスMitsubishi CS-35305の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Mitsubishi CS-35305をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMitsubishi CS-35305の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Mitsubishi CS-35305の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Mitsubishi CS-35305で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Mitsubishi CS-35305を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMitsubishi CS-35305の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Mitsubishi CS-35305に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMitsubishi CS-35305デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。