MitsubishiメーカーDX-TL4709Uの使用説明書/サービス説明書
ページ先へ移動 of 44
1 DIGIT AL RECORDER USER ʼ S MANUAL MODEL DX-TL4709U THIS INSTRUCTION MANUAL IS IMPORT ANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGIT AL RECORDER.
W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSER TED T O PREVENT BLADE EXPOSURE.
Beginning A VERTISSEMENT DANGER D’ÉLECTROCUTION NE P AS OUVRIR A VERTISSEMENT : POUR ÉLIMINER T OUT RISQUE D’ÉLECTRO- CUTION, NE P AS OUVRIR LE COUVERCLE (OU LA P ARTIE ARRIÈRE). AUCUNE PIECE RÉP ARABLE P AR L ’UTILISA TEUR NE SE TROUVE À L ’INTÉRIEUR.
Important safeguards PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR RECORDER AND RET AIN FOR FUTURE REFERENCE. FOLLOW ALL W ARNINGS AND INSTRUCTIONS MARKED ON THE RECORDER. 1. Read Instructions All the safety and operating instructions should be read before the appliance is operated.
Beginning 16. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
2 Caution and care HEA VY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR) NEVER REMOVE THE TOP COVER AND T OUCH OR INSERT ANY OBJECT INSIDE THE UNIT T ouching the inside of the cabinet or i.
3 Beginning There may be cases when the unit's built-in motion detection function does not operate properly due to external condition, video input signal, or other factors. The user will not be indemni fi ed for problems (e.g., recording failure or playback failure) that occur with either the unit or a connected device during operation.
4 INST ALLA TION LOCA TION AND HANDLING • Place this unit horizontally and in a stable place. If this unit is not placed correctly and used in an unstable place, the u nit may be damaged such as removal of the DVD/CD disc. • Do not place this unit close to other electronic or magnetic equipment.
5 Beginning Contents How to read this manual Viewing displays (Refer to this information when operating): Reference information concerning operation (Caution required): Cautionary items concerning operation Finding desired information There is a “ Contents ” at the beginning of this manual.
6 Note Thank you for purchasing Mitsubishi digital recorder DX-TL4709U (hereinafter referred to as “ Product ” ). Before using this Product, please be sure to read the following Software License Agreement with regard to the software contained in this Product (hereinafter referred to as “ Licensed Software ” ).
7 Beginning This Software License Agreement (“Agreement”) is an agreement between you (“User”) and Mitsubishi Electric Corporation (“Licensor”) with regard to the license to use Licensed Software. Article 1 (Grant of license) Licensor hereby grants to User a nonexclusive, nontransferable license to use Licensed Software.
8 How to set the menus Setting the menus The operations of this unit can be set via a menu displayed on OUTPUT A monitor . Y ou can select and set the menu by using the buttons on the front panel or using a USB mouse connected to the unit.
9 How to set the menus Displaying a menu screen step 1. Press the SET UP button or click the left button on the mouse to display a menu. • The <User Menu> appears. • T o open other menu, press the D button or left- click on “Next .” When you use a mouse, click the following area to operate.
10 How to set the menus (continued) Inputting numbers Using the front buttons of the unit: step 1. Press the number buttons (0 to 9) to input and use that number . • The number displayed in red can be changed. step 2. T o move to the next input area, press the 16 button.
11 How to set the menus Symbols in the menus Some symbols appear in the menu screens. The meanings are as follows. (Help) When you press the HELP button or click this symbol, the detailed information on the menu appears. (Left) When you press the 14 button or click this symbol, the item to be set shifts to left.
12 Setting the time and date Time/Date Setting This function is used to set the present date, time, and auto daylight saving. Auto daylight saving function is used to auto- matically gain an hour for the speci fi ed time period. Start/end time of the auto daylight savings can be checked and if needed, changed.
13 Basic operations Basic multiplexer functions This function is used to activate multiplexer functions using the buttons on the front panel. Camera number buttons DIGIT AL ZOOM button SPLIT screen buttons Move buttons SEQUENCE button OUTPUT A/B button Multiplexer buttons 1.
14 Controlling the camera This function is used to control the cameras connected via RS-232C or RS-422/485 terminal. PTZ control using the menu 1 2 PTZ Control 6 step 2 step 1 step 3 step 4 Go to PTZ Control Zoom, iris, focus adjustment, AutoPan Preset Select PTZ Camera User Menu step 1.
15 Basic operations Basic manual recording This function is to setup the recording parameters of recording setting pattern A to start recording manually .
16 Basic playback This function is used to playback recorded data. This unit allows recorded data to be played back using various methods. The basic playback described below is the most common method for playback. step 1. Press the PLA Y button inside of the front door .
17 Basic operations Basic search This function is used to search the start point of needed picture. This unit is equipped with 5 search functions (Search by T ime and Date, Search by Alarm List, Find data storage location, Search by Book Mark, and Search by Motion).
18 Search by Alarm List This unit stores the start time of alarm recording and emergency recording in the alarm list when such recording begins. This item is used to search the desired picture using the list of alarm recording (emergency recording). The search result displays in still frame playback of the single screen display .
19 Basic operations Copying the recorded data This item is used to copy the data to a copy device. Copy Data to Copy 1 Drive/Set Copy 1 Drive This item is used to copy the data to Copy 1 device by speci- fying the start and end points. The points are specified by the date and time or the bookmark.
20 Copy Data to Copy 2 Drive/Set Copy 2 Drive Copy 2 is a backup or archive feature. This item is used to copy the data to Copy 2 device by specifying only the start point.
21 Basic operations Copying the data of this unit to a video cassette This function is used to copy the data of this unit to a video cassette using an analogue video cassette recorder . Data can be copied even when the unit is in recording. For the recording operation, see the instruction manual for the ana- logue video cassette recorder used.
22 Copying the recorded data (continued) Field Reverse Click to display a still picture one fi eld before. Stop Click to stop playback. Audio, if recorded, is played back after the stop when [Not Synchro.] is selected and the audio command has been enabled.
23 Basic operations In synchronized audio playback, the frequency of picture refreshing is reduced depending on the processing power of PC. When you want to playback giving priority to picture, select [Not Synchro.]. The settings on this panel remain intact for the next start- up.
24 Login Start up the Microsoft Internet Explorer and log in. step 1. Start up the Microsoft Internet Explorer and enter the IP address of the recorder . • Enter the IP address which is set in <LAN (Communication) Setting> (System Menu COM/LAN).
Communications by Web Browser 25 step 3 -1 . (If you make an error in entering the user ID or password • • • ) • The “[Caution]” screen appears. step 3 -2 . Select “Login” and either left-click or press ENTER. • The “[Login]” screen appears.
26 Live Monitoring Displays live video on the PC screen. step 1. Select “Live Monitoring” and left-click. • The “[Live]” screen appears. When video retrieval via web browser is tried for the fi rst time, a message as shown below may be displayed.
Communications by Web Browser 27 Playback Retrieves, plays back and searches for pictures that have been recorded by the recorder . step 1. Select “Playback” and left-click. • The “[Playback]” screen appears. step 2. Press the button. • Playback starts.
28 Alarm List Search Click “Alarm List” and the “Alarm List Search” screen appears in the sub-screen. step 1. Set the desired date/time and number of alarm list items to be acquired, and then click “Refresh” to acquire the alarm list. • The alarm list cannot be acquired without clicking “Refresh.
Communications by Web Browser 29 User Registration This is the screen for changing the settings for registered user authorization, and for deleting a registration. It can also be used for registering new users. step 1. Select “User Registration” and left-click.
30 Recorder Title & Camera T itles This is the screen for setting or changing the recorder and the camera titles. step 1. Select “Recorder T itle & Camera T itles” and left- click. • The “[Recorder T itle & Camera T itles]” screen appears.
Communications by Web Browser 31 When the multiple alarm signals are input at the same time, only the picture from the camera corresponding to the lowest sensor number is attached. T o view the attached picture: In the PC with supplied application software installed, click or double click the fi le.
32 Clock Setup This is the screen for setting the clock of the recorder via PC. step 1. Select “Clock Setup” and left-click. • The “[Clock Setup]” screen appears. step 2 -1 . Set “Month,” “Date,” “Y ear ,” “Hour ,” “Min.,” “Sec.
Communications by Web Browser 33 Logout In this screen, assign “Logout” settings to end the job. step 1. Select “Logout” and left-click. • The “[Logout]” screen appears. step 2. Close the Web Browser . If the browser is closed incorrectly (not logging out cor- rectly), the user ’s session ID is saved for 5 minutes.
34 If problems with the unit persist even after you’ve followed the suggestions below , disconnect the power cord and contact the retailer from whom you purchased the unit.
T roubleshooting 35 OTHERS PERIPHERAL RECORDING DEVICE Consult the following Description of problem The unit does not perform playback. The copy device dose not respond. The camera cannot be controlled via this unit. The unit does not perform the motion detection function.
36 Warnings and their appropriate countermeasures #1 Options in the CALL OUT output column: • Selectable: Selects to output CALL OUT signal or not on the menu screen. • Fixed: Outputs CALL OUT signal from the CALL OUT terminal regardless of the menu setting.
W arnings and CALL OUT output 37 W arning Display CALL OUT output #1 Cancelling the warning Log number Countermeasure # # # LOG54 #7 LOG13 #8 LOG33 #8 LOG43 #8 LOG73 #8 LOG23 #8 LOG14 #8 LOG74 #8 LOG2.
.
.
PRINTED IN MALA YSIA.
デバイスMitsubishi DX-TL4709Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Mitsubishi DX-TL4709Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMitsubishi DX-TL4709Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Mitsubishi DX-TL4709Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Mitsubishi DX-TL4709Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Mitsubishi DX-TL4709Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMitsubishi DX-TL4709Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Mitsubishi DX-TL4709Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMitsubishi DX-TL4709Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
