Mitsubishi ElectronicsメーカーPCA-RP-KAの使用説明書/サービス説明書
ページ先へ移動 of 22
.
2 This symbol mark is for EU countries only . This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV , and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II.
3 ■ Indoor Unit PKA-RP·HAL PCA-RP·KA PCA-RP·HA PSA-RP·GA Fan speed 3 speeds + Auto 4 speeds + Auto 2 speeds 2 speeds Vane Auto with swing Auto with swing Manual Manual Louver Manual Manual Manual Auto with swing Filter Normal Long-life Oil Long-life Filter cleaning indication 100 hr 2,500 hr 100 hr 2,500 hr 2.
4 ˚ F ˚ C ˚ F ˚ C ERROR CODE AFTER TIMER TIME SUN MON TUE WED THU FRI SAT ON OFF Hr AFTER FILTER FUNCTION ONLY1Hr. WEEKLY SIMPLE AUTO OFF PAR-21MAA ON/OFF FILTER CHECK OPERATION CLEAR TEST TEMP.
5 1 2 3 2. Parts Names ■ Wireless Remote-Controller ■ When using the wireless remote controller, point it towards the receiver on the indoor unit. ■ If the remote controller is operated within a.
6 3. Screen Con fi guration <Screen Types> For details on setting the language for the remote controller display, refer to section 8. Function Selection.
7 5. Operation 5.2. Mode select ■ Press the operation mode ( ) button 2 and select the opera- tion mode 2 . Cooling mode Drying mode Fan mode Heating mode <Only heat pump type> Automatic (cool.
8 5. Operation Note: ● Available directions depend on the type of unit connected. ● In the following cases, the actual air direction will differ from the direction indicated on the remote controller display. 1. While the display is showing “STAND BY” or “DEFROST”.
9 C C TIME SUN WEEKLY 10 C TIMER SUN ON OFF WEEKLY 8 9 1 Timer Settings 1. Be sure that the weekly timer indicator is visible on the screen (at 1 ). 2. Press the Timer Menu button 2 so that “Monitor” is indicated on the screen (at 8 ). 3. Press the Timer On/Off (Set Day) button 9 as necessary to select the day you wish to view.
10 <How to Set the Simple Timer> 6. Timer Action (On or Off) * “— —” is displayed if there is no setting. Timer Setting ON Hr AFTER SIMPLE 4.
11 <Checking the Current Auto Off Timer Setting> AFTER TIMER OFF AUTO OFF Timer Setting ˚ C ˚ C AFTER OFF AUTO OFF AUTO OFF 1. Be sure that the “Auto Off” is visible on the screen (at 1 ). 2. Hold down the Timer Menu button 2 for 3 seconds so that “Monitor” is indicated on the screen (at 4 ).
12 7.1. Locking the Remote Controller Buttons (Opera- tion function limit controller) ■ If you wish, you can lock the remote controller buttons. You can use the Function Selection of remote controller to select which type of lock to use. (For information about selecting the lock type, see section 8, item [2] (1)).
13 8. Function Selection Function selection of remote controller The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when needed. Item 1 Item 2 Item 3 (Setting content) 1.
14 8. Function Selection OFF no1 no2 OFF ON OFF ON OFF OFF CALL- ON OFF ON OFF ˚ C ˚ F PAR-21MAA ON/OFF FILTER CHECK OPERATION CLEAR TEST TEMP . MENU BACK DAY MONITOR/SET CLOCK ON/OFF English Germany Spanish Russian Italian Chinese French Japanese Item 3 Item 2 Item 1 Hold down the button and press the button for 2 seconds.
15 [Detailed setting] [4]-1 CHANGE LANGUAGE setting The language that appears on the dot display can be selected. • Press the [ MENU] button G to change the language. 1 English (GB), 2 German (D), 3 Spanish (E), 4 Russian (RU), 5 Italian (I), 6 Chinese (CH), 7 French (F), 8 Japanese (JP) Refer to the dot display table.
16 8. Function Selection [Dot display tab le] Waiting f or star t-up Operation mode Cool Dr y Heat Aut o Auto(Cool) Auto(Heat) Fa n V entilation Stand by (Hot adjust) Defrost Set temperature F an spee.
17 E.O. SW 10. Care and Cleaning ON/OFF TEMP . C C FIL TER Note: • Details of emergency mode are as shown below. Operation mode COOL HEAT Set temperature 24°C 24°C Fan speed High High Air fl ow direction Horizontal Downward 4 (5) ■ Indicates that the fi lter needs cleaning.
18 10. Care and Cleaning / 0 1 PSA-RP·GA 1 Open the intake grille. 2 Hold the knob on the fi lter then pull the fi lter up in the direction of an arrow. To replace the fi lter after cleaning, be sure to insert the fi lter far enough until it fi ts into the stopper.
19 11. Trouble Shooting Having trouble? Here is the solution. (Unit is operating normally.) Air conditioner does not heat or cool well. ■ Clean the fi lter. (Air fl ow is reduced when the fi lter is dirty or clogged.) ■ Check the temperature adjustment and adjust the set temperature.
20 12. Speci fi cations Having trouble? Here is the solution. (Unit is operating normally.) Draining water or motor rotation sound is heard. ■ When cooling operation stops, the drain pump operates and then stops. Wait approximately 3 minutes. Noise is louder than speci fi cations.
21 12. Speci fi cations Model PSA-RP71GA PSA-RP100GA PSA-RP125GA PSA-RP140GA Power source(voltage <V>/Frequency<Hz>) ~/N 230/50 Rated Input(Indoor only) <kW> 0.15/0.15 0.24/0.24 0.28/0.28 0.36/0.36 Rated Current(Indoor only) <A> 0.
HEAD OFFICE: T O KY O BLDG., 2-7-3, MAR UNOUCHI, CHIYOD A-KU, TOKY O 100-8310, JAP AN BG79U612H03 Printed in Japan Please be sure to put the contact address/telephone number on this manual before handing it to the customer. BG79U612H03.indd 22 BG79U612H03.
デバイスMitsubishi Electronics PCA-RP-KAの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Mitsubishi Electronics PCA-RP-KAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMitsubishi Electronics PCA-RP-KAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Mitsubishi Electronics PCA-RP-KAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Mitsubishi Electronics PCA-RP-KAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Mitsubishi Electronics PCA-RP-KAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMitsubishi Electronics PCA-RP-KAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Mitsubishi Electronics PCA-RP-KAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMitsubishi Electronics PCA-RP-KAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。