Mitsubishi ElectronicsメーカーXD8100Uの使用説明書/サービス説明書
ページ先へ移動 of 17
1 DLP™ Pr ojector XD8100U Contr olling the pr ojector using a personal computer This projector can be contr olled by connecting a personal computer with RS-232C terminal. In addition, by connecting multiple projectors to each other in a daisy chain configuration, you can contr ol each projector fr om one personal computer .
2 • Example of ID setting (When Group A, which performs multi-pr ojection with two pr ojectors, and Group B, which performs multi-projection with thr ee pr ojectors, are connected.
3 2 . Cont rol com man d config ur ati on The command consists of the address code, ID code, function code, data code, ACK/NAK, and end code. The length of the command varies among the functions.
4 • The projector may not r eceive a command when the splash scr een is being displayed immediately after turning on the power . Use command “00r10” to cancel the splash scr een. • While using the LAN terminals, the LAN functions take precedence.
5 Projector error Send out “00vER” to check error details. Recover from error state. 0– 3 To normal operation 4 Enter password. Send out “00PASS****.
6 4. Comm an d lis t 4. 1 Op er at ion c omm an ds The operation commands are used for the basic operation setting of this projector . They may not be executed while the signals are changed.
7 Use the following commands to obtain the values of the items in the INFORMA TION menu. ITEM Function Data (Receive) Character ASCII code LAMP 1 TIME (LOW) vLE1L 76h 4Ch 45h 31h 4Ch hhhhmm LAMP 2 TIM.
8 • When ID is specied (when the command is sent to the projector with the ID of “01” or “ALL”): Command sent from the PC, etc. Status code returned from the pr ojector Description ‘30.
9 4.4 Di rec t co mma nd s (Not executable in stand-by mode. Possible only to read during BLANK.) The direct commands ar e used to numerically adjust the geometrical corr ection and bright uniformity correction.
10 4.6 Me nu se t ti ng co mma nd s (Not executable in stand-by mode. Possible only to read during BLANK.) The menu setting commands are used for the menu setting of this projector .
11 ITEM Function Data Character ASCII code COOLING CONDITION AG 41h 47h 0 (0°), 1 (45°), 2 (90°), 3 (135°), 4 (180°), 5 (225°), 6 (270°), 7 (315°) TEST P A TTERN TP 54h 50h 0 (OFF), 1 (CROSS HA TCH), 2 (WHITE), 3 (BLACK), 4 (H. COLOR BARS), 5 (V .
12 ITEM Function Data Character ASCII code EDGE BLENDING (RESET) EBRST 45h 42h 52h 53h 54h COLOR MA TCHING CMC 43h 4Dh 43h 0 (OFF), 1 (MANUAL), 2 (MEASURE) COLOR MA TCHING- MANUAL (GAIN) MNTG 4Dh 4Eh .
13 ITEM Function Data Character ASCII code P ASSWORD FUNCTION PSLOCK 50h 53h 4Ch 4Fh 43h 4Bh 0**** (UNLOCK), 1**** (DISPLA Y INPUT), 2**** (MENU ACCESS), 3**** (SPLASH ID SCREEN) **** is a 4 to 8-digit password comprised of any figur es 1 to 4.
14 How to set the value Use the character or ASCII code as shown below to set the value. Character + - 0 1 2 3 4 5 6 7 8 9 ASCII code ‘2Bh’ ‘2Dh’ ‘30h’ ‘31h’ ‘32h’ ‘33h’ ‘34h’ ‘35h’ ‘36h’ ‘37h’ ‘38h’ ‘39h’ [Example 1] When setting the AUTO POWER ON to ON.
15 [Example 3] When checking the TINT setting (when the TINT is set to +10). (V alues enclosed in quotation marks are ASCII codes.): • When ID is not specied: Command sent from the PC, etc. Status code returned from the pr ojector Description ‘30’ ‘30’ ‘53’ ‘0D’ 00S Command for checking the TINT setting (ID command is omitted.
16 4.7 Passwor d loc k com man ds The password lock commands control the password lock. The password lock enabling or disabling command is sent with a 4 to 8-digit password comprised of any gures 1 to 4 added to the end of the data code.
17 5. Exec ut io n pr oce du re of RS -2 32C c omm an ds v ia L A N When the RS-232C command is executed via LAN, a 32-byte connection certication data must be added before the RS-232C command. T o cr eate a 32-byte certication data, following information and procedur e ar e requir ed.
デバイスMitsubishi Electronics XD8100Uの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Mitsubishi Electronics XD8100Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMitsubishi Electronics XD8100Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Mitsubishi Electronics XD8100Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Mitsubishi Electronics XD8100Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Mitsubishi Electronics XD8100Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMitsubishi Electronics XD8100Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Mitsubishi Electronics XD8100Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMitsubishi Electronics XD8100Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。