Mitsubishi ElectronicsメーカーXL8Uの使用説明書/サービス説明書
ページ先へ移動 of 34
EN – 1 ENGLISH FRANÇAIS DEUTSCH ITALIANO ESPAÑOL XL8 SL4 LCD PROJECT OR MODEL XL8U SL4U User Manual.
EN – 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EN – 3 ENGLISH Contents Trademark, Registered trademark Macintosh is registered trademark of Apple Computer Inc. Other brand or product names are trademarks or registered trademarks of their respective holders.
EN – 4 Important safeguards Please read all these instructions regarding your LCD projector and retain them for future reference. Follow all warnings and instructions marked on the LCD projector . 1. Read instructions All the safety and operating instructions should be read before the appliance is operated.
EN – 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector . It may cause fire or electric shock. In this case, unplug immediately and contact your dealer .
EN – 6 Overview POWER STATUS VIDEO KEYSTONE ENTER MENU COMPUTER AUTO POSITION 4 1 2 3 5 6 7 8 9 POWER STATUS VIDEO KEYSTONE ENTER MENU COMPUTER AUTO POSITION 10 11 6 1 2 3 4 5 2 10 5 4 3 1 9 8 6 7 1.
EN – 7 ENGLISH Bottom side 3 1 2 POWER P AGE VOLUME EXP AND SOURCE KEYSTONE AUTO POSITION STILL MUTE ENTER PinP MENU UP DOWN 1 2 3 4 5 6 7 13 12 11 10 9 8 1 Lamp cover 2A ir inlet grille / Filter co.
EN – 8 20˚ 15˚ 20˚ 15˚ 30˚ 30˚ Remote control 20˚ 20˚ Battery loading F irst Loading: When you use the remote control for the first time, pull out the insulation sheet. Replacement of the battery: 1. Turn the remote control upside down. 2. Push the lock inw ard and pull out the battery holder .
EN – 9 ENGLISH Installation Layout of the projector Image size varies depending on the distance between the screen and the projector . Front projection Front projection, ceiling mounting For ceiling mounting, you need the ceiling mount kit designed for this projector .
EN – 10 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player , and personal computer that have analog RGB output connectors. Important: • Make sure that the connected device is turned off before starting connection.
EN – 11 ENGLISH Projector + Computer Important: •W hen you use a longer RGB cable instead of the provided cable, the image quality may deteriorate. •S ome computers require additional connectors or analog RGB output adapters to be connected with this projector .
EN – 12 Preparation • Images may not be projected in a shape of a regular rectangle or with its aspect ratio 4:3, depending on the installation conditions of the projector and the screen. For XL8U only • This projector automatically corrects vertical keystone distortion.
EN – 13 ENGLISH Basic operation Important: • The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are accepted. • By blinking red, the STATUS indicator indicates that the lamp should be replaced soon.
EN – 14 Basic operation (continued) VO LUME 15 Volume from the speaker Press the VOLUME + or – button to change the volume from the speaker . The volume control bar will appear on the screen. • The volume control bar will disappear about 10 seconds after the VOLUME button is released.
EN – 15 ENGLISH Menu operation IMAGE XGA60 opt. INSTALLATION XGA60 opt. AUTO POWER ON OFF AUTO POWER OFF OFF INSTALLATION XGA60 opt. AUTO POWER ON OFF AUTO POWER OFF OFF AUTO POWER ON 30 min AUTO POWER OFF OFF Basic operation Several settings can be adjusted using the menu.
EN – 16 INSTALLATION opt. ON BACK COLOR AUTO POWER ON AUTO POWER OFF SPLASH SCREEN MUTE MODE LAMP MODE ON BLUE ON BLACK OFF IMAGE CAPTURE SETUP OFF STANDARD OFF AUTO KEYSTONE IMAGE REVERSE XGA60 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP.
EN – 17 ENGLISH 3 FEA TURE MENU POSITION . . . Use to select the position of the menu on the screen, 1. (upper left) or 2. (lower right). EXPAND MODE . . Choose the mode for enlarging the image. See page 20. AUDIO MODE ..... Select COMPUTER to output the audio that is input to the AUDIO IN terminal when COMPUTER is chosen as the source.
EN – 18 Image adjustment CONTRAST R COLOR TEMP.-USER 0 CONTRAST B 0 BRIGHTNESS R 0 BRIGHTNESS B 0 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE COLOR MATRIX sRGB opt. 4. Press the { or } button to select the desired color .
EN – 19 ENGLISH Adjustment of the image from the computer This projector adjusts the format of the video signal supplied from the computer . However , sometimes images are not projected correctly owing to the type of the computer used. When the image from the computer isn’t projected correctly , press the A UTO POSITION button.
EN – 20 Advanced features Expand By pressing the EXP AND button on the remote control, you can magnify the image to view the details . Y ou can view the image in its original size in the REAL mode. • The EXP AND mode doesn't work with video or S-video signal.
EN – 21 ENGLISH XL8U XL8U CAPTURE : ENTER X2 CANCEL : MENU CAPTURE : ENTER + ENTER CANCEL : MENU XL8U XL8U CAPTURE : ENTER X2 CANCEL : MENU Setting of the image displayed during startup or muting Y ou can display your desired image as the startup screen (or splash screen).
EN – 22 Advanced features (continued) USB Page-up and page-down Y ou can control the computer to page-up and page-down the presentation data using the remote control.
EN – 23 ENGLISH FEATURE PASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD CONFIRM O K CANCEL FEATURE PASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD O K CANCEL Password function This p.
EN – 24 Lamp replacement 8. Tighten up the screws (c) using a Phillips screwdriver (+). 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secure the lamp cover .
EN – 25 ENGLISH Maintenance Cleaning of the projector and the ventilation slots Use a soft cloth to clean the projector and the ventila- tion grilles . When the grilles become dirty , wipe them with a soft cloth dampened with diluted mild deter - gent, and then wipe them with a dry cloth.
EN – 26 Tr oubleshooting The following offers solutions to some of the common problems you may encounter . W e suggest that you consult this chart before contacting your dealer . Images aren't projected on the screen. Problem Power isn't turned on.
EN – 27 ENGLISH Images aren't projected correctly . Problem Projected images are shaking. Projected images are displaced. Projected images are distorted. Projected images are dark. Projected images are blurred. Afterimages persist on the screen.
EN – 28 Tr oubleshooting (contin ued) Others Cause and solution • This air comes out as a result of cooling the inside of the projector . This isn't a product malfunction. • Check that the volume isn't set to low . • The microcomputers inside the projector may be wrongly operating because of noise.
EN – 29 ENGLISH Indicators POWER STATUS VIDEO KEYSTONE COMPUTER AUTO POSITION POWER Steady red Steady green Steady green ST A TUS Off Blinking green Steady green CONDITION Stand-by Lamp stand-by (about 1 minute) The power is on. (Normal condition) NOTE The POWER button cannot be used to switch between on and off.
EN – 30 Specifications Type Model Rated power supply Rated input LCD panels Colors Projection lens Light source lamp Picture size PC compatibility V ideo compatibility Audio output Speaker S-video i.
EN – 31 ENGLISH Connectors 1R ( RED)/C R 2 G(GREEN)/Y 3 B(BLUE)/C B 4 GND 5 GND 6 GND 7 GND 8 GND 9– 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 TXD IN 2–– 3–– 4 GND – 5 CTS / 5V IN/OUT 6 CLOCK OUT 7 RXD OUT 8 RI / DATA OUT 1 35 2 68 1 5 11 6 10 15 267 70 48.
EN – 32 TV60, 480i(525i) – 15.73 59.94 1024 x 768 – *1 TV50, 576i(625i) – 15.63 50.00 1024 x 768 – *1 1080i 60 (1125i 60) – 33.75 60.00 1024 x 576 – *1 1080i 50 (1125i 50) – 28.13 50.00 1024 x 576 – *1 1080i 50a (1250i 50) – 31.25 50.
EN – 33 ENGLISH TV60, 480i(525i) – 15.73 59.94 800 x 600 – *1 TV50, 576i(625i) – 15.63 50.00 800 x 600 – *1 1080i 60 (1125i 60) – 33.75 60.00 800 x 450 – *1 1080i 50 (1125i 50) – 28.13 50.00 800 x 450 – *1 1080i 50a (1250i 50) – 31.
North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.ca Information T echnologies Group, 4299 14th A venue, Markham, Ontario L3R 0J2, Canada Sales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :projectors@mitsubishielectric.
デバイスMitsubishi Electronics XL8Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Mitsubishi Electronics XL8Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMitsubishi Electronics XL8Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Mitsubishi Electronics XL8Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Mitsubishi Electronics XL8Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Mitsubishi Electronics XL8Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMitsubishi Electronics XL8Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Mitsubishi Electronics XL8Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMitsubishi Electronics XL8Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
