Moyer DiebelメーカーMH65-M2の使用説明書/サービス説明書
ページ先へ移動 of 51
T echnical Manual F or machines be ginning with Serial No. W8100 Model Hood-T ype Dishwasher Moy er Diebel Ltd. September , 2003 Manual P/N 113647 MH65-M2 High T emperature with Built-in Booster Machine Serial No . Simply Engineered Better P . O. Box 4149 Winston-Salem, North Car olina 27115-4149 336/661-1556 F ax: 336/661-1660 2674 N.
Complete the infor ma tion below f or quick reference. Model Number Serial Number V oltage and Phase Moyer Diebel Parts Supplier Phone Moyer Diebel Service Agenc y Phone Note: W hen calling to order parts, be sure to hav e the model number , serial number , voltage and phase of your machine.
i REVISION RECORD Revision Revised Serial Number Comments Date Pages Effectivity 7/3/03 All W8100 First issue of manual and replacement parts lists REVISION RECORD.
ii REVISION RECORD R e vision Recor d (CONT .).
iii LIMITED W ARRANTY Limited W ar ranty Moyer Diebel, P.O. Box 4183, Winston-Salem, North Carolina 27115, and P. O. Box 301, 2674 North Service Road, Jordan Station, Ontario, Canada L0R 1S0 warrants machines, and parts, as set out below.
iv FOREW ORD 1. Read the instructions in this manual carefully . It contains important information on installation, operation, and safety . 2. Store this manual carefully for future reference. 3. After remo ving packing material, check for loose parts in dishracks.
Revision Record ........................................................................................................... i Limited W arranty ......................................................................................................... iii Fore ward .
vi T his Page Intentionall y Left Blank P ar t 1: INST ALLA TION AND MAINTENANCE.
1 INTRODUCTION INTRODUCTION W elcome to Moyer Diebel ... and thank you for allo wing us to take care of your dishw ashing needs. This manual cov ers the hood-type dishwasher model MH-65. Y our machine was completely assembled , inspected and thoroughly tested at our factory before it was shipped to your installation site.
2 GENERAL MODEL NUMBERS MH-65 The MH-65 model is a high temperature (180°F/82°C rinse) sanitizing model with booster . S tandard Equipment Includes: • Quick 65 second cycle • 1.
3 Auto/Manual Switch Manual Cycle Start(UP) Auto Manual Switch Door Activated Cycle (DOWN) Selector Switch Extended W ash Manual Start Switch Machine Ready Heater OFF Light (Only on S/N W8100-W8135) (.
4 ! P ar t 1: OPERA TION P ART 1: OPERA TION (CONT .) OPERA TION AND USE (CONT .) 7. Remove the rack at a slight incline to permit all the w ater to drain; allow dishw are to dry . After washing one’ s hands, handle the rack in such a manner as not to touch the dishware inside, then place the rack on hygienically clean shelves.
5 MAINTENANCE: IMPORT ANT : Before carrying out the cleaning and maintenance operations, turn of f the main discon- nect switch for the equipment. Frequently check and clean the nozzles. Blocked nozzles will pre vent the machine from cleaning properly .
6 P ART 1: OPERA TION (CONT .) OPERA TION AND USE (CONT .) SANITIZING THE MACHINE Sanitizing the machine at least once a week is of the utmost importance in order to guarantee hygiene, e ven when the machine is not in use. It is advisable to use a disinfecting product suggested by an authorized detergent dealer .
7 Auto/Manual Switch Manual Cycle Start(UP) Auto Manual Switch Door Activated Cycle (DOWN) Selector Switch Extended W ash Manual Start Switch Machine Ready Heater OFF Light In Cycle Light Cycle Selection Short - 65 Seconds Medium-120 Seconds Long -180 Seconds OFF Position (Only on S/N W8100-W8135) PART 1: OPERA TION Figure 1.
8 P ART 2: INST ALLA TION AND MAINTENANCE INST ALLA TION AND MAINTENANCE INSTRUCTIONS The following instructions are addressed to qualif ied personnel.
9 ! P ART 2: INST ALLA TION AND MAINTENANCE (CONT .) Drain connections 1. The MH65 model is a gravity drain machine equipped with a 1-3/8" O.D. tailpiece and a 6 foot long 1" I.D. hose. 2. The maximum drain flow rate is 15 gallons/min-56.8 litres/min.
10 T his Pa ge Intentionall y Left Blank.
11 P ar t 3: REPLA CEMENT P A RTS PA R T 3 : REPLA CEMENT PA R T S.
12 P ar t 3: REPLACEMENT P AR TS Figure 3.1- Hood and T ank 1 2 1 B 4 A A A 7 3 5 6 6.
13 P ar t 3: REPLA CEMENT P A RTS HOOD AND TANK Fig. 3.1 Part Item No. No. Part Description Qty 1 C351421 Panel, Side ..................................................................................... 2 2 C351835 Panel Front .......................
14 P ar t 3: REPLACEMENT P AR TS Figure 3.2- Door Handle and Springs For handle connections see Figure 3.3 B 1 2 3 2 1 4 5 7 6 A.
15 P ar t 3: REPLA CEMENT P A RTS DOOR HANDLE AND SPRINGS Fig. 3.2 Part Item No. No. Part Description Qty 1 107398-1 Door Lift Block ............................................................................. 2 2 107398-2 Door Lift Block Roller ....
16 P ar t 3: REPLACEMENT P AR TS Figure 3.3- Door Switch and Block A Detail A 10 11 14 9 7 6 5 4 3 2 2 1 11 7 16 6 16 XX 15 13 12.
17 P ar t 3: REPLA CEMENT P A RTS DOOR SWITCH AND BLOCKS Fig. 3.3 Part Item No. No. Part Description Qty 1 108442 Bolt M5 x 15mm Filister Head ..................................................... 2 2 W asher ...... ...................................
18 P ar t 3: REPLACEMENT P AR TS Figure 3.4- T racks and Screens 2 1 3 *See Note on Parts.
19 P ar t 3: REPLA CEMENT P A RTS HOOD AND TANK Fig. 3.4 Part Item No. No. Part Description Qty * 1 C530238 Track Assembly ............................................................................. 1 2 C332091sx Left Screen ........................
20 P ar t 3: REPLACEMENT P AR TS Figure 3.5- W ash and Rinse Spray Arms 2 5 6 7 8 2 5 7 12 6 7 7 12 11 9 10 10 9 11 4 3 4 3 1 8 1 13.
21 P ar t 3: REPLA CEMENT P A RTS WASH AND RINSE SPRA Y ARMS Fig. 3.5 Part Item No. No. Part Description Qty 1 C191075 W asher ...... ..................................................................................... 2 2 C420573 W ash Arm (Minus Items 1, 3-5) .
22 P ar t 3: REPLACEMENT P AR TS Figure 3.6- W ash T ank Components 13 12 10 6 5 1 2 3 9 8 7 14 15.
23 P ar t 3: REPLA CEMENT P A RTS WASH TANK COMPONENTS Fig. 3.6 Part Item No. No. Part Description Qty 1 109985 O-ring, Heater ............................................................................... 1 2 C110226 Heater Element W ash T ank 3KW 230V .
24 P ar t 3: REPLACEMENT P AR TS Figure 3.7- Drain Assembly TO MOTOR PUMP DRAIN OUT T o Drain Out 1 3 4 5 6 9 11 12 11 2 10 7 6.
25 P ar t 3: REPLA CEMENT P A RTS DRAIN ASSEMBL Y Fig. 3.7 Part Item No. No. Part Description Qty 1 C180729 T ube, Ov erflow ............................................................................. 1 2 C200950 Seal, Overflo w T ube ..............
26 P ar t 3: REPLACEMENT P AR TS Figure 3.8- W ash and Rinse Piping 5 4 3 MACHINE BACK A 1 14 4 5 3 15 2 MACHINE BACK 6 5 7 5 6 8 9 10 11 12 13 T o Booster 16 13 13.
27 P ar t 3: REPLA CEMENT P A RTS WASH AND RINSE PIPING Fig. 3.8 Part Item No. No. Part Description Qty 1 C190227 Spindle .......................................................................................... 2 2 C332526 Rinse T ube ..............
28 P ar t 3: REPLACEMENT P AR TS Figure 3.9- W ash PumpAssembly 1 2 3 4 5 6 7 A A.
29 P ar t 3: REPLA CEMENT P A RTS WASH PUMP ASSMEBL Y Fig. 3.9 Part Item No. No. Part Description Qty 1 109651 Pump V olute .................................................................................. 1 2 109653 Pump Oring ......................
30 P ar t 3: REPLACEMENT P AR TS 6 5 4 1 3 2 A BASE 6 7 7 W ater Inlet W ater T o Final Rinse 8 B Figure 3.10- Booster Assembly.
31 P ar t 3: REPLA CEMENT P A RTS BOOSTER ASSEMBL Y Fig. 3.10 Part Item No. No. Part Description Qty 1 109985 Seal, Electric Element ................................................................... 1 2 C322821 Element Cover ........................
32 P ar t 3: REPLACEMENT P AR TS 4 5 2 1 3 4 5 9 5 8 7 6 6 10 16 15 14 13 12 A 11 T o Booster T ank Base Figure 3.11- W ater Inlet Piping.
33 P ar t 3: REPLA CEMENT P A RTS WA TER INLET PIPING Fig. 3.11 Part Item No. No. Part Description Qty 1 100500 V acuum Breaker 1/2" .................................................................... 1 2 108349 Repair Kit 1/2" ............
34 P ar t 3: REPLACEMENT P AR TS 9 8 7 10 6 12 11 13 12 11 2 3 1 4 5 W ash Rinse A Figure 3.12- Control Panel.
35 P ar t 3: REPLA CEMENT P A RTS CONTR OL PANEL Fig. 3.12 Part Item No. No. Part Description Qty 1 C120713 Selector Switch ............................................................................. 1 2 C290821 Spacer , Selector Switch ............
36 P ar t 3: REPLACEMENT P AR TS 1 3 3 7 6 16 9 6 4 4 2 19 5 11 12 8 10 1 3 1 5 18 17 1 4 Figure 3.13- Control Cabinet.
37 P ar t 3: REPLA CEMENT P A RTS CONTR OL CABINET Fig. 3.13 Part Item No. No. Part Description Qty 1 C121288 T imer Assembly Complete ........................................................... 1 2 C120501 Thermostat T ank ...........................
38 P ar t 3: REPLACEMENT P AR TS T his Pa ge Intentionally Left Blank P ar t 4: ELECTRICAL SCHEMA TICS.
39 P ar t 3: REPLA CEMENT P A RTS P ar t 4: ELECTRICAL SCHEMA TICS PA R T 4 : ELECTRICAL SCHEMA TICS.
40 P ar t 3: REPLACEMENT P AR TS T his Pa ge Intentionally Left Blank P ar t 4: ELECTRICAL SCHEMA TICS.
SGOCC. MAIN ROTARY SWITCH LINE SHORT CYCLE MEDIUM CYCLE 5 4 3 2 1 3° 2° 1° 0 LONG CYCLE POSITION: D3 D3a(F) D3a(E) D3(D) D3(C) D3(B) D3(A) 0 WASH PUMP OVERLOAD RELAY RINSE WASH 152 SEC D3a ~ SPEED .
SGOCC. MAIN ROTARY SWITCH LINE SHORT CYCLE MEDIUM CYCLE 5 4 3 2 1 3° 2° 1° 0 LONG CYCLE POSITION: D3 D3a(F) D3a(E) D3(D) D3(C) D3(B) D3(A) 0 WASH PUMP OVERLOAD RELAY RINSE WASH 152 SEC D3a ~ SPEED .
42 REPLACEMENT P ARTS.
デバイスMoyer Diebel MH65-M2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Moyer Diebel MH65-M2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMoyer Diebel MH65-M2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Moyer Diebel MH65-M2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Moyer Diebel MH65-M2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Moyer Diebel MH65-M2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMoyer Diebel MH65-M2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Moyer Diebel MH65-M2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMoyer Diebel MH65-M2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
