ArtメーカーTube MP Studioの使用説明書/サービス説明書
ページ先へ移動 of 12
- 1 - The ART TUBE MP STUDIO TABLE OF CONTENTS Introduction ......................................................................................... 2 Installation ......................................................................................
- 2 - INTRODUCTION Thank you for purchasing the Tube MP Studio - and congratulations: You now own one of the most versatile preamplifiers available. Offering a superb level of sound quality, the Tube .
- 3 - INSTALLATION The Tube MP Studio may be used in a wide variety of applications and environments. Self-contained in an all-steel enclosure, the Tube MP Studio is designed for continuous professional use. Because the unit is compact and lightweight, mounting location is not critical.
- 4 - CONTROLS & INDICATORS INPUT CONTROL The Input Control sets the amount of input gain of the Tube MP Studio. Turn the control clockwise to increase gain and counterclockwise to decrease gain. You may control two ranges of gain with this control, +26 to +60dB and +6 to +40dB.
- 5 - Dynamic microphones should not be affected or damaged if they are plugged into a line where Phantom power is present. However, if the mic doesn't need it, do not use it. Some things are best left untested! PHASE REVERSE SWITCH The Phase Reverse switch is provided to reverse the phase of the signal.
- 6 - POWER/CLIP/LIMIT LED The bi-color Power/Clip/Limit LED lights green after power is applied and with lower level signals. If OPL is not being used, then the LED will serve as a signal clip indicator. It will light red whenever the signal at the tube’s output is about to clip.
- 7 - CONNECTIONS Despite the Tube MP Studio’s sophistication, it is easy to interface the unit with a wide variety of equipment. All inputs and outputs, are located on the rear panel. Standard ¼” and XLR inputs and outputs make patching simple. ¼” INPUT JACK The ¼” Input jack is for instrument and line level inputs.
- 8 - ¼” OUTPUT JACK The ¼” Output jack is unbalanced and should be used for sending signals to amps, processors, or other unbalanced configurations. Both balanced and unbalanced output connections may be used simultaneously. This is particularly useful when using the Tube MP Studio as a direct box for instruments or line level signals.
- 9 - OPERATION The main application of the Tube MP Studio is a microphone preamplifier. Plug any microphone directly into either input and set the input and output controls to provide an appropriate level into the next stage of your system.
- 10 - WARRANTY INFORMATION Limited Warranty Applied Research and Technology will provide warranty and service for this unit in accordance with the following warrants: Applied Research and Technology,.
- 11 - SERVICE The following information is provided in the unlikely event that your unit requires service. 1) Be sure that the unit is the cause of the problem. Check to make sure the unit has the proper power supplied, all cables are connected correctly, and the cables themselves are in working condition.
- 12 - TUBE MP STUDIO SPECIFICATIONS Dimensions 5.0”H x 5.5” W x 2.0”H Weight 1.5 lbs. Input Connections XLR (balanced), ¼ ”TS Output Connections XLR (balanced), ¼ ”TS Input Impedance XLR,.
デバイスArt Tube MP Studioの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Art Tube MP Studioをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはArt Tube MP Studioの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Art Tube MP Studioの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Art Tube MP Studioで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Art Tube MP Studioを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はArt Tube MP Studioの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Art Tube MP Studioに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちArt Tube MP Studioデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
