MultiquipメーカーC-30HDの使用説明書/サービス説明書
ページ先へ移動 of 94
© COPYRIGHT 2001, MUL TIQUIP INC . P AR TS AND OPERA TION MANUAL Concr ete Pump Model C-30HD MUL TIQUIP INC . . . . . P ARTS DEP A RTMENT : 18910 WILMINGTON AVE.
P A GE 2 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01).
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P AR TS DEP AR TMENT 800-427-1244 or.
P A GE 4 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) Here's how to get help ............................................ 3 T able of contents ..................................................... 4 P ar ts order ing procedures .
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 5 P ARTS ORDERING PR OCEDURES Get special freight allowances when you order 10 or more line items via FAX!** UPS Ground Service at no charge for freight PS Third Day Ser vice at one-half of actual freight cost No other allow ances on freight shipped b y any other carrier .
P A GE 6 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) PERFORMANCE Pumping Rate .................................................................................................................. 25 cu. yds. per hour Maximum Aggregate Size .
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 7 MA YCO PUMP W ARRANTY Mechanical Drive Models MA YCO PUMP , hereinafter ref erred to as “ Manuf acturer ’ , warrants each .
P A GE 8 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) SAFETY INSTRUCTIONS 1. Read the Mayco Owners Manual before moving or operating the unit. 2. Do not attempt to operate this pump without a thorough understanding of this technical manual.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 9 IMPOR T ANT HAND SIGNALS.
P A GE 10 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) GENERAL INFORMA TION The following operating principles and operating suggestions should prove helpful in the successful operation of your concrete pump.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 11 NO TE P A GE.
P A GE 12 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — HO W IT W ORKS The Mayco concrete pump has one main pumping piston which is valved by means of two ball checks. (A inlet, and B outlet.) The secondary piston is used as a compensator piston to smooth out the pulsations of a single piston action.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 13 C-30HD — HO W IT W ORKS.
P A GE 14 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD OPERA TING INFORMA TION OPERA TING SUGGESTIONS 1. A well-planned location of the pump and routing of the hose bef ore star ting a pour ma y sav e subsequent mov es throughout the job .
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 15 PUMPING TIPS AND TR OUBLE SHOO TING 1. The effects of heat and e xcessive time on concrete: Hot concrete, commonly referred to as a hot load, is concrete that has been in the redi-mix truck in excess of 2 to 3 hours.
P A GE 16 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) 7.10 Shake out around 2 feet of concrete before reconnecting hose to pump .
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 17 C-30HD OPERA TING INFORMA TION 12. Slight pulsation of the hose will always be noticeable near the pump . Excessive pulsation of the hose near the pump is normally due to higher than average line pressures caused by stiff, harsh mixes, or extremely long pumping distances.
P A GE 18 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD OPERA TING INFORMA TION PA R T B This section will explain the recommended procedure for using a sponge to clean out the lines. After completion of the pour , pump the remaining concrete in the hopper through the discharge line.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 19 CONCRETE MIX DESIGNS-SCREEN ANAL YSIS- TERMINOLOGY The following information has been prepared to assist in the selection of concrete mix designs in cer tain areas where the use of concrete pumps is a new industr y .
P A GE 20 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) CONCRETE MIX INFORMA TION The f ollowing inf ormation has been extracted from actual testing labor ator y repor ts.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 21 A.S.T .M. ST AND ARD SPECIFICA TION FOR GRADING A GGREGA TE Screen Size of Operating Percentage Passing U.S. Metric (by weight) FINE A GGREGA TE: Ref erred to as washed concrete sand.
P A GE 22 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) CONCRETE MIX INFORMA TION Consolidated Rock Products Co ., Division of T ests 3/8 ” P ea Grav el ST AND ARD PUMP MIXES (one-half inch minus) NO TE: All weights shown are one cubic yard with S.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 23 1. T o obtain a representativ e sample, tak e samples at three or more regular intervals throughout the discharge of the mixer or truck. DO NO T take samples at the beginning or end of the discharge.
P A GE 24 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) How to read the marks and remarks used in this parts book. Items Found In the “ Remarks ” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusiv e) where a par ticular par t is used.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 25 C-30HD Concrete Pump 1 Units Qty . P /N Description 6 ...... EM14904 ..................... PIST ON CUP KITS 4 ...... EM18804 ..................... 4 1/2" STEEL BALL 4 ....
P A GE 26 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) Bef ore star ting the engine, ref er to the HA TZ diesel or WISCONSIN air cooled engine manual for break-in instructions. 1. IGNITION-is a push/pull type control, to star t the pump engine, the ignition control must be pulled out.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 27 NO TE P A GE.
P A GE 28 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — FRAME.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 29 C-30HD CONCRETE PUMP FRAME NO. P AR T NO . P AR T NAME QTY . REMARKS 1 EM117 B OL T , HEX 1/2-13X2 4 2 EM923346 W ASHER, LOCK 1/2" ........................................
P A GE 30 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — GASOLINE ENGINE CONTROL 35 3 # 6A.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 31 C-30HD — GASOLINE ENGINE CONTROL C-30HD CONCRETE PUMP GASOLINE ENGINE NO. P AR T NO . P AR T NAME QTY . REMARKS 1 EM147 BO L T , 1/2-13X2.1/2" 4 2 EM923346 W ASHER, LOCK 1/2" .
P A GE 32 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — DIESEL ENGINE CONTROL.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 33 C-30HD — DIESEL ENGINE CONTROL C-30HD CONCRETE PUMP DIESEL ENGINE CONTROL-C-30HD NO. P AR T NO . P AR T NAME QTY . REMARKS 1 EM968011 NU T , LOCK 1/2-13 .....................
P A GE 34 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) NO TE P A GE.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 35 C-30HD — MANIFOLD ASSEMBL Y Note: EXPLODED VIEW OF P A GES 34 & 35.
P A GE 36 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — CONCRETE DELIVER Y.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 37 C-30HD — CONCRETE DELIVER Y C-30HD CONCRETE PUMP CONCRETE DELIVER Y NO. P AR T NO . P AR T NAME QTY . REMARKS 28 1 EM23837 REDUCER, 3X2 ......................................
P A GE 38 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) Note: CLUTCH ASSY (BLM 6") P/N EM14320A HAS BEEN REPLACED BY CLUTCH ASSY P/N EM14320 ( 8" CLUTCH) THE CLUTCH.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 39 NO TE P A GE.
P A GE 40 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — CRANKSHAFT ASSEMBL Y.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 41 C-30HD CONCRETE PUMP CRANKSHAFT ASSEMBL Y NO. P AR T NO . P AR T NAME QTY . REMARKS 1 EM14305 CRANKSHAFT 1 2 EM14322 S P A C .
P A GE 42 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — CRANKSHAFT ASSEMBL Y 156.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 43 C-30HD CONCRETE PUMP CRANKSHAFT ASSEMBL Y NO. P AR T NO . P AR T NAME QTY . REMARKS 13 2 EM14322 S P A C E R 1 13 3 EM14326 “ O ” RING 2 13 4 EM923350 LOCK W ASHER ........
P A GE 44 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — COUNTER SHAFT ASSEMBL Y.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 45 C-30HD — COUNTER SHAFT ASSEMBL Y C-30HD CONCRETE PUMP COUNTER SHAFT ASSEMBL Y NO.
P A GE 46 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — COMPENSA T OR PIST ON RO D.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 47 C-30HD — COMPENSA T OR PIST ON RO D C-30HD CONCRETE PUMP COMPENSA TOR PIST ON R OD NO. P AR T NO . P AR T NAME QTY . REMARKS 10 4 EM18800 PUMPING CYLINDER 1 10 5 EM968446 N U T , HEX 3/4-10 .
P A GE 48 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — CONNECTING R OD ASSEMBL Y 20328 (OLD STYLE) A.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 49 C-30HD — CONNECTING ROD ASSEMBL Y 20328 (OLD STYLE) C-30HD CONCRETE PUMP CONNECTING R OD ASSEMBL Y EM20328 (OLD STYLE) NO. P AR T NO . P AR T NAME QTY . REMARKS A EM20328 CONNECTING ROD ASSY .
P A GE 50 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — CONNECTING ROD ASSEMBL Y 20328T (NEW STYLE) A.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 51 C-30HD — CONNECTING ROD ASSEMBL Y 20328T (NEW STYLE) C-30HD CONCRETE PUMP CONNECTING R OD ASSEMBL Y EM20328T (NEW STYLE) NO. P AR T NO . P AR T NAME QTY . REMARKS A EM20328T CONNECTING ROD ASSY .
P A GE 52 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — ROCKER ASSEMBL Y.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 53 C-30HD CONCRETE PUMP ROCKER ASSEMBLIES NO. P AR T NO . P AR T NAME QTY . REMARKS 6 8 EM202 B O L T , HEX 1-8X6 LG 1 6 9 EM133 B O L T , HEX 1-14X2 LG 2 7 0 EM627 W ASHER, ST AR 1 ” 3 7 1 EM14329 ROCKER ARM SHAFT 1 7 2 EM916001 LUBE FITTING, 1/8-27 NPT .
P A GE 54 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — COMPENSA TING SPRING ASSEMBL Y EM14409 NO TE: If it is necessary to replace the spr ing, remov e the piston head assembly which allows the guide weldment to be removed from the piston rod.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 55 C-30HD — RETURN SPRING ASSEMBL Y EM14846 EM903092 EM14105 EM14333 EM14334 EM14331 EM14805 EM14332 (P ART OF PUMP BO X ASSEM.
P A GE 56 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — OIL SYSTEM AND FUEL SYSTEM.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 57 C-30HD — OIL SYSTEM AND FUEL SYSTEM C-30HD CONCRETE PUMP OIL SYSTEM AND FUEL SYSTEM NO. P AR T NO . P AR T NAME QTY . REMARKS 17 6 EM20426 M INI BARB ELBOW 2 17 7 EM20427 FUEL LINE A/ R 1 7 8 FUEL T ANK .
P A GE 58 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — CENTRAL GREASE LUBRICA TION P ANEL EFFECTIVE S/N 970101 FITTING LOCA TION AND PLASTIC HOSE LENGTH POSITION LOCA TION LENGTH OF LINES 1 .......................
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 59 NO TE P A GE.
P A GE 60 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — AXLE INST ALLA TION 212 A.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 61 C-30HD — AXLE INST ALLA TION C-30HD CONCRETE PUMP AXLE INST ALLA TION NO. P AR T NO . P AR T NAME QTY . REMARKS A EM26615A TIRE ASSY .........................................
P A GE 62 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — HOPPER AND HOOD 69.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 63 C-30HD — HOPPER AND HOOD C-30HD CONCRETE PUMP HOPPER AND HOOD NO. P AR T NO . P AR T NAME QTY . REMARKS 5 6 DURASEA T ................................................ 1 .....
P A GE 64 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30MG — SCALED DO WN MANIFOLD/CYLINDER KIT MODEL C-30MG The above manifold/cylinder and piston assembly can be ordered as a kit to be installed on model C-30K, C-30SP or model C-30D pumps.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 65 NO TE P A GE.
P A GE 66 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30MG — MANIFOLD ASSEMBL Y C-30MG.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 67 C-30MG — MANIFOLD ASSEMBL Y C-30MG C-30MG CONCRETE PUMP MANIFOLD ASSEMBL Y -C30-MG NO. P AR T NO . P AR T NAME QTY . REMARKS 1 EM14832 PUMPING CYLINDER 1 2 EM14827 MANIFOLD 1 3 EM14824 STEEL BALL, 3-1/4 1 4 EM14422 S Q.
P A GE 68 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30MG — PIST ON HEAD COMPONENTS.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 69 C-30MG CONCRETE PUMP PIST ON HEAD COMPONENTS C30-MG NO. P AR T NO . P AR T NAME QTY . REMARKS 1 EM968446 NU T , HEX 3/4-10 ....................................... 2 ...........
P A GE 70 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30SP — OPTIONAL SCREW CONVEY OR AND T ORQUE LIMITER MODEL C30-SP.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 71 C-30SP CONCRETE PUMP OPTIONAL SCREW CONVEY OR AND T ORQ UE LIMITER C30-SP NO. P AR T NO . P AR T NAME QTY . REMARKS 1 EM14175 HOPPER 1 2 EM968011 NU T , HEX 1/2-13 ............
P A GE 72 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) RECOMMEMDED SHO TCRETE SYSTEM For swimming pool construction, ditch lining, tunnel lining, slope stabilization, etc.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 73 NO. P AR T NO . P AR T NAME QTY . REMARKS 1 EM28904 ........... 3" “ B ” COUPLING 2 EM23946 ........... 3"-90 ° ELBOW 3 EM28903 ........... 2 1/2" S/J COUPLING 4 EM28005DD .
P A GE 74 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD SHO TCRETE A CCESSORIES.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 75 C-30HD CONCRETE PUMP SHO TCRETE ACCESSORIES NO. P AR T NO . P AR T NAME QTY .
P A GE 76 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — SER VICE PR OCEDURES 1. CRANKSHAFT AND CAM ASSEMBL Y PROCEDURE A. Set bearing bloc k (par t #EM14303) into hydr aulic press. Place bear ing cup into bearing bloc k and press in e v enly .
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 77 C-30HD — SER VICE PR OCEDURES 3. CLUTCH LINING REPLA CEMENT (FOR EM14320 CLUTCH ASSEMBL Y ONL Y) A. Remove worn out lining and rivets. Check clutch springs and flyweights f or wear .
P A GE 78 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — SER VICE INFORMA TION MANUF A CTURING CHANGES When ordering the new Manifold P/N EM14819, the following items are necessary to complete the new Clamp Arm Assembly: EM451.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 79 C-30HD — SER VICE INFORMA TION MANUF A CTURING CHANGES P ar t No. EM20342 Old Rocker Arm Assembly Interchanges with Plaster Pump.
P A GE 80 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — SER VICE INFORMA TION MANUF A CTURING CHANGES Adjustment Make sure the rod is screwed completely into the carburetor bellcrank and the n ut is locked down.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 81 C-30HD — SER VICE INFORMA TION: REMO TE CONTR OL 1. T urn Bell Crank on carburetor with Swiv el End up . Bell Crank 2. Drill .156 dia. hole through Bell Cr ank s wiv el on Throttle side of carburetor .
P A GE 82 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — REMO TE CONTROL SCHEMA TIC.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 83 C-30HD — REMO TE CONTR OL SCHEMA TIC.
P A GE 84 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) Important Adjust linkage as follows: 1. Ener giz e the solenoid which will “ bottom ” the solenoid plunger . 2. Screw eyebolt into bell crank swivel until all slack is removed fr om chain, and “ idle set screw ” is full idle position.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 85 (Overload Safety Device Installed on Scre w Con vey or Shaft) C-30HD — SER VICE INFORMA TION: T ORQUE LIMITER (MODEL C30-SP.
P A GE 86 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — SER VICE INFORMA TION: BEARING INST ALLA TION After the cam bushing is installed as per instructions below , remove the three “ dog type ” allen set screws (B) to allow detents to be drilled.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 87 C-30HD — SER VICE INFORMA TION CONNECTING ROD ASSEMBL Y EM20328T (NEW STYLE) (EM104) (EM602) EM20335- EM20336 — EM20338 .
P A GE 88 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) Illustration represents the oil pressurized system (oil pump) C-30HD — SER VICE INFORMA TION: CONCRETE PIST ON HEAD .
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 89 C-30HD — SER VICE INFORMA TION RETURN SPRING ADJUSTMENT PROCEDURE Do not tighten 3/4 ” bolt completely so that rod end will be free to move.
P A GE 90 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) C-30HD — SER VICE INFORMA TION BEL T AND CHAIN ADJUSTMENT 1. Loosen the pillow bearing bolts only to the point where the bolts will remain snug. 2. Unlock the two pusher bolt lock nuts.
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 91 Roller chain properly selected, installed and maintained is an extremely versatile means of power transmission.
P A GE 92 — C-30HD — P AR TS & OPERA TION MANU AL — REV . #4 (03/06/01) WHEN DISASSEMBLING OR ASSEMBLING CHAINS: W ARNING: — The components of a chain are hardened parts. Striking these par ts ma y cause metal chips to break off from the chain or the tools used resulting in personal injur y .
C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01) — PAGE 93 Effective: July 1, 2000 TERMS AND CONDITIONS OF SALE — PA R T S P A YMENT TERMS T erms of payment f or par ts are net 10 days. FREIGHT POLICY All par ts orders will be shipped collect or prepaid with the charges added to the invoice.
P ARTS AND OPERA TION MANUAL MUL TIQUIP INC. POST OFFICE BO X 6254 CARSON, CA 90749 310-537-3700 • 800-421-1244 F AX: 310-537-3927 E-MAIL: mq@multiquip.
デバイスMultiquip C-30HDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Multiquip C-30HDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMultiquip C-30HDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Multiquip C-30HDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Multiquip C-30HDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Multiquip C-30HDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMultiquip C-30HDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Multiquip C-30HDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMultiquip C-30HDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
