MultiquipメーカーEM-900SDの使用説明書/サービス説明書
ページ先へ移動 of 44
OPERA TION AND P AR TS MANUAL THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. T o find the latest revision of this publication, visit our website at: www .
P A GE 2 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) Engine Hatz Engine Assembly ...................................... 38-39 T ransmission T ransmission Assemb ly ..................................... 40-41 T er ms and Conditions Of Sale — P ar ts .
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 3 NO TES 5 5.
P A GE 4 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — SAFETY MESSA GE ALERT SYMBOLS Safety precautions should be followed at all times when operating this equipment.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 5 Accidental Starting EM-900SDCE MIXER — SAFETY MESSA GE ALERT SYMBOLS AL W A YS make sure the engine is tur ned OFF before servicing the engine or equipment. Respiratory Hazard AL W A YS wear approv ed respirator y protection.
P A GE 6 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — OPERA TION AND SAFETY DECALS Machine Safety Decals The Multiquip EM-900SDCE mix er is equipped with a number of saf ety decals (see below and on the proceeding page).
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 7 EM-900SDCE MIXER — OPERA TION AND SAFETY DECALS.
P A GE 8 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — SPECIFICA TIONS (NOISE AND VIBRA TION) EC Declaration of Conformity In accordance with EN 45014:1998 W e Multiquip Inc.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 9 EM-900SDCE MIXER — SPECIFICA TIONS In accordance with our established policy of constant improvement, we reserve the right to amend these specifications at any time without notice.
P A GE 10 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) The following safety guidelines should always be used when operating the EM-900SD CE mixer: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 11 GENERAL SAFETY ■ Stop the engine when leaving the mixer unattended. ■ Block the unit when leaving or when using on a slope. ■ Maintain this equipment in a safe operating condition at all times.
P A GE 12 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — GENERAL INFORMA TION GENERAL Multiquip's EM-900SD CE series plaster and mortar mixer is shipped completely assembled and has been factory tested.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 13 EM-900SDCE MIXER — ENGINE COMPONENTS INITIAL SER VICING The engine (Figure 1) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing.
P A GE 14 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) 1. Engine Cover — Lift this cover to gain access to the engine compartment. 2. Clutch Engagement Lever — Push the clutch lever forward, toward the tow end of the mixer to engage clutch.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 15 EM-900SDCE MIXER — P ADDLE BLADE ADJUSTMENT B Figure 3 illustrates the paddle blade adjustment ( steel drum ).
P A GE 16 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) FUEL 1 . Lift the fuel cap latch (Figure 1) located on top of the fuel tank, then look inside the tank and determine if the engine fuel is low . If fuel is low , fill with diesel fuel (Figure 4).
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 17 LUBRICANTS CLUTCH OIL 1 . Remove the clutch oil level plug (Figure 8). If oil begins to seep out as the plug is being removed, then it can be assumed that the clutch oil is at the proper operating level.
P A GE 18 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) Figure 10. Starter Grip EM -900SDCE MIXER — INITIAL ST AR T -UP This section is intended to assist the operator with the initial star t-up of the EM-900SDCE mixer .
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 19 EM-900SDCE MIXER — MAINTENANCE The clutch reduction assembly has two separate compartments. Each of which must be filled with its proper lubricant and checked at regular intervals.
P A GE 20 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — MAINTENANCE Clutch Adjustment Mechanical 9 CF Mixer If the rotating mixing paddles appear to be losing rotational speed, it may be necessary to adjust the clutch.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 21 EM-900SDCE MIXER — TROUBLESHOO TING (ENGINE) Practically all breakdowns can be prevented by proper handling and.
P A GE 22 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — T OUBLESHOO TING (ENGINE/MIXER) Practically all breakdowns can be prevented by proper.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 23 NO TE P A GE.
P A GE 24 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EXPLANA TION OF CODE IN REMARKS COLUMN The contents and part numbers listed in the parts section are subject to change without notice . Multiquip does not guarantee the availibility of the parts listed.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 25 EM-900SDCE MIXER — SUGGESTED SP ARE P ARTS EM-900SDCE 1 T O 3 UNITS Qt y . P/N Description 6 ............ 491010 ............ R UBBER LA TCH ASSY . 1 ............
P A GE 26 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — NAME PLA TE AND DECALS NAME PLA TE AND DECALS.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 27 EM-900SDCE — NAME PLA TE AND DECALS NAME PLA TE AND DECALS NO P AR T NO P AR T NAME QTY .
P A GE 28 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE — NAME PLA TE AND DECALS NAME PLA TE AND DECALS.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 29 EM-900SDCE — NAME PLA TE AND DECALS NAME PLA TE AND DECALS NO P AR T NO P AR T NAME QTY .
P A GE 30 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — MIXING DR UM ASSEMBL Y MIXING DR UM ASSY .
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 31 MIXING DR UM ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 512990 P ADDLE SHAFT 1 2 EM963610 SCREW , HHCS 3/8 "NC X 1-1/4" G5 ................... 6 ....
P A GE 32 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) P ADDLE SHAFT ASSEMBL Y EM-900SDCE MIXER — P ADDLE SHAFT ASSEMBL Y.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 33 EM-900SDCE MIXER — P ADDLE SHAFT ASSEMBL Y ASSEMBL Y P ADDLE SHAFT ASSY .
P A GE 34 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — CABINET ASSY . CABINET ASSEMBL Y.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 35 EM-900SDCE — CABINET ASSY . CABINET ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 513053 CABINET , ENGINE W/DECALS .................. 1 ........... INCLUDES ITEMS W/ * 2 490202 R UBBER PRO TECT OR 4 3 13287 LOCK NUT 8-32 .
P A GE 36 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — FRAME ASSY . FRAME ASSY ..
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 37 EM-900SDCE MIXER — FRAME ASSY . FRAME ASSY . NO P AR T NO P AR T NAME QTY .
P A GE 38 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE MIXER — HA TZ ENGINE ASSY . HA TZ ENGINE ASSY .
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 39 EM-900SDCE MIXER — HA TZ ENGINE ASSY . HA TZ ENGINE ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 1B30 H A TZ DIESEL 6.8 HP 1 2 506257 U-BOL T 1 3 6109170 W ASHER , FLA T 1/2" .
P A GE 40 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) EM-900SDCE — TRANSMISSION ASSY . TRANSMISSION ASSY ..
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 41 EM-900SDCE — TRANSMISSION ASSY . TRANSMISSION ASSY . NO P AR T NO P AR T NAME QTY .
P A GE 42 — MUL TIQUIP EM-900SDCE — OPERA TION AND P ARTS MANU AL — REV . #2 (09/14/07) P A YMENT TERMS T erms of payment f or par ts are net 30 da ys. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice.
MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07) — PAGE 43 NO TES.
^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668 OPERA TION AND P ARTS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2007, MUL TIQUIP INC. Multiquip Inc, the MQ logo and the Essick logo are registered trademarks of Multiquip Inc.
デバイスMultiquip EM-900SDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Multiquip EM-900SDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMultiquip EM-900SDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Multiquip EM-900SDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Multiquip EM-900SDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Multiquip EM-900SDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMultiquip EM-900SDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Multiquip EM-900SDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMultiquip EM-900SDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
