MultiquipメーカーGDP-5Hの使用説明書/サービス説明書
ページ先へ移動 of 82
OPERA TION AND P AR TS MANUAL Re vision #2 (10/05/05) THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. MODEL GDP-5H High Cycle Generator (HONDA GASOLINE ENGINE).
P A GE 2 — GDP-5H A.C. GENERA T OR— P ARTS & OPERA TION MANU AL — REV . #2 (10/05/05).
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MUL TIQUIP CORPORA TE OFFICE 18910 Wilmington A v e. 800-421-1244 Carson, CA 90746 FAX: 310-537-3927 Email: mq@multiquip.
P A GE 4 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) T ABLE OF CONTENTS NOTE Specification and part number are subject to change without notice . HONDA GX340K1EDN2 ENGINE Air Cleaner Assembly ...............
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 5 When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ Dealer account number ❒ ❒.
P A GE 6 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — SAFETY MESSA GE ALERT SYMBOLS Safety precautions should be followed at all times when operating this equipment. F ailure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 7 GDP-5H — SAFETY MESSA GE ALERT SYMBOLS AL W A YS wear approv ed ey e and hearing protection. NEVER operate equipment with covers, or guards remov ed. K eep fingers, hands, hair and clothing away from all moving par ts to pre v ent injur y .
P A GE 8 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) The following safety guidelines should always be used when operating the GDP-5H P or table Generator: GENERAL SAFETY ■ DO NO T operate or service this equipment before reading this entire manual.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 9 GDP-5H — R ULES FOR SAFE OPERA TION ■ AL W A YS be sure the operator is f amiliar with proper saf ety precautions and operation techniques bef ore using generator .
P A GE 10 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) Backfeed to a utility system can cause electrocution and or property damage. NEVER connect the generator to a building's electrical system without a transfer switch or other approved device.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 11 GDP-5H — OPERA TION AND SAFETY DECALS Machine Safety Decals The GDP-5H por table gener ator is equipped with a number of saf ety decals (Figure 1). These decals are provided f or operator saf ety and maintenance information.
P A GE 12 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — SPECIFICA TIONS (GENERA T OR) The maximum output of the engine listed above is applicable to supplying electrical power for continuous service at ambient conditions in accordance with SAE T est cord J607.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 13 GDP-5H — SPECIFICA TIONS (ENGINE) In keeping with Multiquip's policy of constantly improving its products, the specifications quoted herein are subject to change without prior notice.
P A GE 14 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — DIMENSIONS Figure 2. Dimensions.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 15 GDP-5H — GENERAL INFORMA TION GDP-5H F AMILIARIZA TION Generator The Multiquip Model GDP-5H generator has be.
P A GE 16 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — LO AD APPLICA TION Single Phase Load — 60 Hz Always be sure to check the nameplate on the.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 17 GDP-5H — LO AD APPLICA TION/EAR TH LEAKA GE BREAKER Three Phase Load — 180 Hz 180 Hz, three phase, 230V , motor-in-head vibrators can be operated with this gener ator .
P A GE 18 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — CONTR OLS AND INDICA T ORS 1 . 230V Output Receptacles– These three NEMA 7410 twist-lock receptacles will pro vide 230V , 12.5 amps, 180 Hz.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 19 When the switch is in the 240 volt (down) position, you can acess half of the rated power of the generating se.
P A GE 20 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) This HOND A engine is equipped with a low oil shutdo wn capability . A built in sensor will automatically turn off the engine should the oil level fall below a safe operating condition.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 21 GDP-5H — GENERA T OR REFUELING Figure 5. Generator Refueling Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down.
P A GE 22 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — INST ALLA TION Outdoor Installation Install the generator/welder in a area that is free of debris , bystanders , and overhead obstructions . Make sure the generator is on secure level ground so that it cannot slide or shift around.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 23 Connecting the Ground The nut and ground terminal on the generator should alwa ys be used to connect the generator to a suitab le ground. The ground cable should be #8 size wire minimum.
P A GE 24 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) General Inspection Prior to Operation Ground P o wer T ools When using power tools or electrical equipment requireing AC power from the generator , make sure connecting (po wer tool) cable (Figure 7) has a ground as shown in Figure.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 25 GDP-5H — PRE-INSPECTION (ENGINE) Figure 8. Engine Oil Dipstick (Removal) 3 . Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick.
P A GE 26 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — INITIAL ST ART -UP (ENGINE) This section is intended to assist the operator with the initial star t-up of the por table generator .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 27 6 . If the engine has started, slowly return the choke lever (Figure 13 ) to the “OPEN” position. If the engine has not started repeat steps 1 through 5. 7 .
P A GE 28 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) Connecting the Load 1. If small wattage power tools are required, connect them to the 60 Hz output receptacles at this time. GDP-5H — INITIAL ST AR T -UP/GENERA T OR OPERA TION 180 Hz Operation 1.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 29 Stopping the Engine 1. Place both the 60 and180 Hz circuit breakers (Figure 25) in the OFF position.
P A GE 30 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — MAINTENANCE (ENGINE) Use T able 7 as a general maintenance guideline when servicing your engine. For more detail engine maintenance information, refer to the Honda engine owner's manual supplied with your engine.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 31 GDP-5H — MAINTENANCE (ENGINE) Maintenance P erf or m the scheduled maintenance procedures as defined by T able 6 and below: D AIL Y ■ Thoroughly remove dirt and oil from the engine and control area.
P A GE 32 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — WIRING DIA GRAM (GENERA T OR) S/N 5541049 AND BELO W Figure 32.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 33 GDP-5H — WIRING DIA GRAM (GENERA T OR) S/N 5543731 AND ABO VE Figure 33.
P A GE 34 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — TR OUBLESHOO TING (ENGINE) Practically all breakdowns can be prevented by proper handling a.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 35 GDP-5H — TR OUBLESHOO TING (ENGINE) ) D E U N I T N O C ( G N I T O O H S E L B U O R T E N I G N E .
P A GE 36 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — TR OUBLESHOO TING (GENERA T OR) G N I T O O H S E L B U O R T R O T A R E N E G . 9 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S e g a t l o v w o L ? w o l o o t d e e p s e n i g n E .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 37 NO TE P A GE.
P A GE 38 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — EXPLANA TION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 39 GDP-5H — SUGGESTED SP ARE P ARTS GDP-5H 1 T O 3 UNITS WITH HOND A GX340K1EDN2 ENGINE 1 to 3 Units Qty . P/N Description 1 ........ A9924800014 ........... CAP FUEL T ANK 1 .
P A GE 40 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — NAMEPLA TE AND DECALS..
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 41 GDP-5H — NAMEPLA TE AND DECALS. NAME PLA TE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 A4561000103 DE C A L ; MQ M U L T I Q UIP 5000 1 2 0600500047 DECAL; CHOKE 1 3 1980680004 DECAL; FUEL COCK .
P A GE 42 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — GENERA T OR ASSY . GENERA T OR ASSY ..
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 43 GDP-5H — GENERA T OR ASSY . GENERA T OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * 7851000203 ROT O R ASSY . .................................... 1 .
P A GE 44 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — CONTR OL BO X ASSY . CONTROL BO X ASSY ..
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 45 GDP-5H — CONTR OL BO X ASSY . CONTROL BO X ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 A3214000003 CONTROL BO X 1 2 0601851755 GROMMET ................
P A GE 46 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — MUFFLER ASSY . MUFFLER ASSY ..
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 47 GDP-5H — MUFFLER ASSY . MUFFLER ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 7852310003 MUFFLER 1 2 18320ZC2000 PRO TECT OR ......................... 1 ....
P A GE 48 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) GDP-5H — PIPE FRAME ASSY . PIPE FRAME ASSY ..
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 49 GDP-5H — PIPE FRAME ASSY . PIPE FRAME ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 A4417000102 PIPE FRAME 1 2 A3417100004 BRACKET 1 3 0017106016 HEX HEAD BOL T 4 4 7855411203 BASE 1 5 3015419604 R UBBER SUSPENSION 2 6 1665419004 R UBBER SUSPENSION .
P A GE 50 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — AIR CLEANER ASSY . AIR CLEANER ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 51 HOND A GX340K1EDN2 ENGINE — AIR CLEANER ASSY . AIR CLEANER ASSY .
P A GE 52 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — CAMSHAFT ASSY . CAMSHAFT ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 53 HOND A GX340K1EDN2 ENGINE — CAMSHAFT ASSY . CAMSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 14100ZE3020 CA M S H AF T A S S Y . ..................
P A GE 54 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — CARBURET OR ASSY . CARBURET OR ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 55 HOND A GX340K1EDN2 ENGINE — CARBURET OR ASSY . CARBURET OR ASSY .
P A GE 56 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) CONTROL ASSY . HOND A GX340K1EDN2 ENGINE — CONTR OL ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 57 CONTROL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16550ZE3700 ARM, GO VERNOR 1 3 16555ZE3000 ROD , GO VERNOR 1 4 16561ZE3000 SPRING, GO VERNOR 1 5 16562ZE3700 SPRING, THR O TTLE RETURN 1 9 16570ZE3700 CONTR OL ASSY .
P A GE 58 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — CRANKCASE CO VER ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 59 HOND A GX340K1EDN2 ENGINE — CRANKCASE CO VER ASSY . CRANKCASE CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2 11300ZE3020 CO VER ASSY ., CRANKCASE (S-TYPE) .
P A GE 60 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) CRANKSHAFT ASSY . HOND A GX340K1EDN2 ENGINE — CRANKSHAFT ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 61 CRANKSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 6 13310ZE3701 CRANKSHAFT (E-TYPE) 1 7 13351ZE3010 WEIGHT , BALANCER 1 1 1 961006207000 BEARING, RADIAL BALL (6207) 1 HOND A GX340K1EDN2 ENGINE — CRANKSHAFT ASSY .
P A GE 62 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — CYLINDER B ARREL ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 63 HOND A GX340K1EDN2 ENGINE — CYLINDER B ARREL ASSY . CYLINDER BARREL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 12000ZE3817 CYLINDER ASSY . (ALER T) ..
P A GE 64 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — CYLINDER HEAD ASSY . CYLINDER HEAD ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 65 HOND A GX340K1EDN2 ENGINE — CYLINDER HEAD ASSY . CYLINDER HEAD ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 12200ZF6W01 CYLINDER HEAD 1 2 12204ZE2306 GUIDE, V AL VE (OS) (OPTIONAL) 1 3 12205ZE2305 GUIDE, EX.
P A GE 66 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — F AN CO VER ASSY . F AN CO VER ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 67 HOND A GX340K1EDN2 ENGINE — F AN CO VER ASSY . F AN CO VER ASSY .
P A GE 68 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — FL YWHEEL ASSY . FL YWHEEL ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 69 HOND A GX340K1EDN2 ENGINE — FL YWHEEL ASSY . FL YWHEEL ASSY .
P A GE 70 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — IGNITION COIL ASSY . IGNITION COIL ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 71 HOND A GX340K1EDN2 ENGINE — IGNITION COIL ASSY . IGNITION COIL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 30500ZE2023 COIL ASSY ., IGNITION 1 2 30700ZE1013 CAP ASSY .
P A GE 72 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — PIST ON ASSY . PIST ON ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 73 HOND A GX340K1EDN2 ENGINE — PIST ON ASSY . PIST ON ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 13010ZE3003 RING SET , PIST ON (STD) 1 1 13011ZE3003 RING SET , PIST ON (OS 0.
P A GE 74 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — RECOIL ST ARTER ASSY . RECOIL ST ARTER ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 75 HOND A GX340K1EDN2 ENGINE — RECOIL ST AR TER ASSY . RECOIL ST ARTER ASSY .
P A GE 76 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — SOLENOID ASSY . SOLENOID ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 77 SOLENOID ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16268893000 SPRING, CHOKE RETURN 1 2 17850ZD1E30 LEVER, THRO TTLE 1 3 36160ZB4003 SOLENOID ASSY .
P A GE 78 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) HOND A GX340K1EDN2 ENGINE — LABELS ASSY . LABELS ASSY .
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 79 HOND A GX340K1EDN2 ENGINE — LABELS ASSY . LABELS ASSY . NO .
P A GE 80 — GDP-5H A.C. GENERA T OR— P AR TS & OPERA TION MANU AL — REV . #2 (10/05/05) Effective: October 1, 2002 TERMS AND CONDITIONS OF SALE — P A RTS Multiquip reserves the right to qu.
GDP-5H A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (10/05/05) — PAGE 81 NO TE P A GE.
HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MUL TIQUIP CORPORA TE OFFICE 18910 Wilmington A v e. 800-421-1244 Carson, CA 90746 FAX: 310-537-3927 Email: mq@multiquip.
デバイスMultiquip GDP-5Hの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Multiquip GDP-5Hをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMultiquip GDP-5Hの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Multiquip GDP-5Hの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Multiquip GDP-5Hで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Multiquip GDP-5Hを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMultiquip GDP-5Hの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Multiquip GDP-5Hに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMultiquip GDP-5Hデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
